Schwinn 470i Elliptical Owner's Manual

0 (0)

470i

This product is compliant with the
applicable CE requirements.	ASSEMBLY MANUAL / OWNER’S MANUAL
	ASSEMBLY MANUAL / OWNER’S MANUAL

Table of Contents

Important Safety Instructions - Assembly	3
Safety Warning Labels / Serial Number 4
Specifications	5
Before Assembly	5
Parts	6
Hardware	7
Tools	7
Assembly	8
Moving the Machine	20
Leveling the Machine	21
Important Safety Instructions	22
Features	23
Console Features	24

Operations	29
Mounting and Dismounting	29
Power Up / Idle Mode	29
Quick Start Program	30
User Profiles	30
Pausing or Stopping	36
Results / Cool Down Mode	36
GOAL TRACK Statistics	37
Console Service Mode	39
Maintenance	41
Maintenance Parts	42
Troubleshooting	44

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty, contact your local distributor.

If you have questions or problems with your product, please contact your local Schwinn® distributor. To find your local distributor, go to: www.nautilusinternational.com

Important Safety Instructions

-Assembly

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

•Keep bystanders and children away from the product you are assembling at all times.

•Do not connect power supply to the machine until instructed to do so.

•Do not assemble this machine outdoors or in a wet or moist location.

•Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

•Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

•Set up this machine on a solid, level, horizontal surface.

•Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

•If replacement parts are necessary, use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

•Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.

•Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.

•Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

•This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to determine the location of the magnets on this product.

Safety Warning Labels and Serial

Number

•Read, understand and obey all warnings on this machine.

•Keep children away.

•Not intended for use by anyone under 14 years of age.

•Prior to use, read and understand the Owner’s Manual.

•Injury or death is possible if Caution is not used while using this machine.

•The maximum user weight for this machine is 300 lbs (136 kg).

•Replace any “Caution”, “Warning” or “Danger” label that is illegible, damaged, or removed.

•The heart rate displayed may be inaccurate and should be used for reference only.

		Serial Number	Product Specifications
			Product Specifications

•

Specifications

71.5 cm ( 28.2” )

160.5 cm ( 63.2” )

178.1 cm ( 70.1” )

Maximum User Weight:	136 kg ( 300 lbs. )
Machine Weight:	76.5 kg ( 168.7 lbs. )

Total Surface Area (foot print) of equipment:

12734.2 cm2 ( 1976.8 inches2 )

Power Requirements:

Operational Voltage: 220V - 240V AC, 50Hz Operating Current: 1A

Regulatory Approvals:

This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class H.

DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 193.4 cm x 300 cm ( 76.2” x 118.1” ). Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of the elliptical machine.

Basic Assembly Tips

Follow these basic points when you assemble your machine:

•Read and understand the “Important Safety Instructions” before assembly.

•Collect all the pieces necessary for each assembly step.

•Using the recommended wrenches, turn the bolts and nuts to the right

(clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

•When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

•The assembly can require 2 people.

		3.0m ( 118.1” )
		0.6m
		( 24” )
		0.6m
		( 24” )
	1.93m	0.6m
	( 76.2” )	0.6m
	( 76.2” )	( 24” )
		( 24” )
		0.6m
		( 24” )
		5

PARTS

22		2
		2
21	1	5
	1	5
20		3
	18	4
		12
19		6
19

17
9	7
	7

16
		11
15
14	13	10	8
14
15

A decal has been applied to all right (“ R ”) and left (“ L ”) parts to assist with assembly.

Item	Qty	Description	Item	Qty	Description

1	1	Console Mast	12	1	Upper Shroud

2	1	Static Handlebar	13	1	Front Stabilizer

3	1	Arm Pivot Rod	14	2	Handlebar Shroud, Inner
4	1	Water Bottle Holder	15	2	Handlebar Shroud, Outer

5	1	Console	16	1	Right Leg

6	1	Upper Left Handlebar Arm	17	1	Right Pedal

7	1	Lower Left Handlebar Arm	18	1	Shroud Cap

8	1	Left Pedal	19	1	Lower Right Handlebar Arm

9	1	Rail Assembly	20	1	Upper Right Handlebar Arm

10	1	Left Leg	21	1	Power Cord

11	1	Frame	22	1	MP3 Cord

HARDWARE / TOOLs

A B C D E F G H I

Item	Qty	Description	Item	Qty	Description

A	6	Button Head Hex Screw, M8x16 (with	F	6	Wave Washer
		Loctite® adhesive)
B	4	Flat Washer, M8	G	12	Lock Washer, M8

C	8	Wide Washer, M8	H	2	Pivot Sleeve

D	4	Button Head Hex Screw, M8x16	I	4	Phillips Head Screw, M5x12

E	2	Hex Head Screw, M8x20