Schwinn A10 User Manual

0 (0)

Manual en Español Latino Americano:	ASSEMBLY MANUAL / OWNER’S MANUAL
http://www.schwinnfitness.com

Table of Contents

Important Safety Instructions - Assembly	3	Important Safety Instructions - Owner’s	14
Safety Warning Labels / Serial Number	4	Features	15
Specifications	4	Console Features	16
Before Assembly	5	Contact Heart Rate (CHR)	17
Parts	6	Operations	19
Hardware	7	Adjustments	19
Tools	7	Quick Start / Manual Program	19
Assembly	8	Profile Programs	20
Leveling the Bike	13	Pausing or Stopping	20
Moving the Bike	13	Results	20
		Changing Unit Measures
		(English Imperial/Metric)	20
		Maintenance	21
		Troubleshooting	24
		Warranty	27

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty , go to: www.SchwinnFitness.com/register Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458) Or go to: www.SchwinnFitness.com

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. +01-360-859-5180, technics@nautilus.com | © 2013 Nautilus, Inc..

Important Safety Instructions

— ASSEMBLY

!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

!Read and understand all warnings on this machine. Carefully read and understand the Assembly instructions.

•Keep bystanders and children away from the product you are assembling at all times.

•Do not connect power supply to the machine until instructed to do so.

•Do not assemble this machine outdoors or in a wet or moist location.

•Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

•Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

•Set up this machine on a solid, level, horizontal surface.

•Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

•If replacement parts are necessary, use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

•Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the

Manual.

•Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.

•Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

•This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to determine the location of the magnets on this product.

Safety Warning Labels and Serial Number

Serial number

Product specification

•

FCC Compliance

!Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Specifications

Maximum User Weight: 275 lbs. (125 kg)

Power Requirements: 4 D Batteries (LR20) – not included

Operational Voltage: 6VDC

Regulatory Approvals:

Optional AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 500mA Output.

Class 2 or LPS.

!This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.

50” (126cm)

27.5” (67cm)	19” (48cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 67” x 56” (1.7m x 1.42m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1.Read and understand the “Important Safety Instructions” before assembly.

2.Collect all the pieces necessary for each assembly step.

3.Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

4.When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.

5.The assembly can require 2 people.

PARTS

5	11 (R)

10 (L)

Item	Qty	Description	Item	Qty	Description

1	1	Main Frame	8	1	Console

2	1	Front Stabilizer	9	1	Handlebars

3	1	Rear Stabilizer	10	1	Left Pedal (L)
4	1	Seat Post	11	1	Right Pedal (R)

5	1	Adjustment Knob (pre-installed)	12	1	Water Bottle Holder

6	1	Seat	13	1	Media Tray

7	1	Console Mast (with pre-installed Handlebar Bracket)

Note: Media Cable is attached to the Console.

HARDWARE / TOOLs

A B C D

Item	Qty	Description

A	4	Carriage Bolt M8 x 65

B	8	Arc Washer M8

C	4	Acorn Nut M8

D	4	Hex Screw M8 x 15

Tools

Included	Not Included
6 mm	(recommended)

13mm/17mm

15 mm

ASSEMBLY

1. Attach Stabilizers to Main Frame

Note: Make sure the Schwinn® decal on the Rear Stabilizer faces outward from the machine.

2. Install Pedals

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.

11 (R)