Manual en Español Latino Americano: |
ASSEMBLY MANUAL / OWNER’S MANUAL |
http://www.schwinnfitness.com |
TABLE OF CONTENTS
Important Safety Instructions - Assembly |
3 |
Important Safety Instructions - Owner’s |
19 |
Safety Warning Labels / Serial Number |
4 |
Features |
20 |
Specifications |
5 |
Console Features |
21 |
Before Assembly |
5 |
Contact Heart Rate (CHR) |
22 |
Parts |
6 |
Operations |
24 |
Hardware |
7 |
Adjustments |
24 |
Tools |
7 |
Initial Setup |
25 |
Assembly |
8 |
Quick Start / Manual Program |
25 |
Moving the Bike |
18 |
Workout Program Selection |
25 |
Leveling the Bike |
18 |
User Setup Mode |
25 |
|
|
Custom Workout |
27 |
|
|
Profile Programs |
27 |
|
|
Results/Cool Down Mode |
28 |
|
|
Pausing or Stopping |
28 |
|
|
User Statistics |
28 |
|
|
Console Setup |
29 |
|
|
Maintenance |
30 |
|
|
Troubleshooting |
32 |
|
|
Warranty |
35 |
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@ nautilus.com | outside U.S. +01-360-859-5180, technics-APLA@nautilus.com | Printed in China | © 2012 Nautilus, Inc.
2
Important Safety Instructions
— ASSEMBLY
!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine. Carefully read and understand the Assembly instructions.
•Keep bystanders and children away from the product you are assembling at all times.
•Do not connect power supply to the machine until instructed to do so.
•Do not assemble this machine outdoors or in a wet or moist location.
•Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
•Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
•Set up this machine on a solid, level, horizontal surface.
•Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.
•If replacement parts are necessary, use only genuine Nautilus® replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
•Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.
•Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future reference.
•Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
•This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to determine the location of the magnets on this product.
3
SAFETY WARNING LABELS AND
SERIAL NUMBER
• Keep children away.
• Prior to use, read and understand the Owners Manual.
• Injury or death is possible if Caution is not used while using this machine.
• The maximum user weight for this machine is 300 lbs (136 Kg).
• Replace any “Caution” “Warning” or “Danger” label that is illegible, damaged, or removed.
• This machine is for home use only.
Manufacture Date: MM/YY
Serial Number
Nautilus, Inc.®
18225 NE Riverside Parkway,Portland, Or. 97230 www.nautilus.com
Phone:1-800-NAUTILUS
Brand: SCHWINN Model: 225
Electrical Rating: 9VDC,1.5A Accuracy Class: H
Use: For consumer use only.
Maximum User Weight: 300lb (136kg) Fitness Equipment Type
Made in: China
Patent: www.nautilusinc.com/IP |
8000493_B |
FCC Compliance
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the ! user’s authority to operate the equipment.
The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
4
SPECIFICATIONS
51.5” (131 cm)
55” (140 cm)
25” (64 cm)
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
Operational Voltage: Operational Voltage 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 1500mA Output.
Class 2 or LPS.
!This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 103” x 73” (262 cm x 186 cm).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
•Read and understand the “Important Safety Instructions” before assembly.
•Collect all the pieces necessary for each assembly step.
•Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
•When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
•The assembly requires 2 people.
5
PARTS
4
1 2
3
|
15 |
5 |
|
|
|
14 |
6 |
7 |
|
||
|
16 |
|
13
8 9
12 |
10 |
|
11 |
Item |
Qty |
Description |
Item |
Qty |
Description |
|
|
|
|
|
|
1 |
1 |
Main Frame |
10 |
1 |
AC Adapter |
|
|
|
|
|
|
2 |
1 |
Seat Rail |
11 |
1 |
Left Pedal |
|
|
|
|
|
|
3 |
1 |
Rear Frame |
12 |
1 |
Right Pedal |
|
|
|
|
|
|
4 |
1 |
Seat Back |
13 |
1 |
Front Stabilizer |
|
|
|
|
|
|
5 |
1 |
Seat Bottom |
14 |
1 |
Rear Stabilizer |
|
|
|
|
|
|
6 |
1 |
Seat Frame |
15 |
1 |
Seat Rail Bracket |
|
|
|
|
|
|
7 |
1 |
Handlebar, Side |
16 |
1 |
Water Bottle Holder |
|
|
|
|
|
|
8 |
1 |
Console Mast |
17 |
1 |
MP3 Cord (not shown) |
|
|
|
|
|
|
9 |
1 |
Console |
|
|
|
|
|
|
|
|
|
6
HARDWARE / TOOLS
A |
|
B |
C |
D |
E |
|
F |
G |
Item |
Qty |
Description |
|
|
Item |
Qty |
Description |
|
A |
4 |
Flat Head Hex Screw M8 x 16 |
|
E |
4 |
Curved Washer M8 |
||
B |
13 |
Button Head Hex Screw M8 x 16 |
F |
8 |
Button Head Hex Screw M8 x 45 |
|||
C |
4 |
Button Head Hex Screw M8 x 20 |
G |
4 |
Cap |
|||
D |
21 |
Flat Washer M8 |
|
|
|
|
|
Tools
Included |
Not Included |
6 mm |
(recommended) |
7
ASSEMBLY
1. Attach Stabilizers to the Main and Rear Frame
Note: Make sure the Schwinn® decal on the Rear Stabilizer faces outward from the machine.
6mm
X4
A
14
3
1
13
8
2. Connect Rear Frame to Main Frame
Note: Hardware is pre-installed and not on the Hardware Card ( * ).
NOTICE: Do not crimp Console Cable.
X5
*
*
6mm
9
3. Attach Handlebar to Seat Frame
6
X4
D
B
6mm
7
4. Attach Seat Back and Bottom to Seat Assembly
4
5
X8
D
F 6mm
10
5. Slide the Seat Assembly onto the Seat Rail
Note: Lock the Adjustment Knob into one of the Seat Rail locking holes.
NOTICE: Do not crimp Heart Rate Cable.
2
6. Connect Heart Rate Cable to Seat Assembly
11