Quick-55 2/26/04 11:38 AM Page 2
YP-55 Quick Guide
Location of Controls
MENU/Loop Repeating Button
|
|
|
|
Voice Recording Button |
Volume Button |
VOL |
|
REC / ENC |
Neck strap Hook |
|
|
|
|
|
|
|
|
|
Microphone |
|
Display |
|
|
Move to Track/ |
|
Play/Stop/Pause Button |
|||
|
Speed Search Lever |
|||
|
|
|
|
|
|
|
|
|
WOW Button |
|
|
Y |
H |
|
|
128 |
P |
O |
|
USB Cable |
MB |
5 |
D |
|
5 |
|
Earphone Jack |
||
|
|
|
||
Connection Port |
|
|
|
|
|
|
|
|
|
|
Battery Cover |
|
Hold Switch |
ENC Jack |
|
|
|
Playing Music
When you press the button, the yepp logo appears and a music/voice file is played.
Stopping Music
When you press the |
|
button while playing, the music stops. If no buttons are pressed within 10 |
||
seconds (changes depending on settings), the yepp automatically powers off. |
||||
● You can also turn off the power by pressing and holding the |
|
button. |
||
|
1
Connecting the USB cable
Before connecting yepp to PC, make sure to install USB driver.
1 Plug one end of the USB cable into the USB port on the back of the PC.
2 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp.
●If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.
●The yepp will automatically turn on.
3 USB driver is installed with a message saying that it is searching for a new device. You may not see the display screen during installation. Go to the device manager to check that installation
has been successfully completed..
4 Upon installation of the USB driver "SAMSUNG YP-55”will appear in the
[System Properties] [Device Manager].
cable connect USB |
|
REC / ENC |
MODE |
VOL |
2