Pioneer AVIC HD3 Operation Manual

Operation Manual
HDD AV NAVIGATION HEAD UNIT
AVIC-HD3
The screens shown in the examples may differ from the actual screens. The actual screens may be changed without notice for performance and function improvements.
Introduction
This manual provides the important information you need to make full use of your new navigation sys­tem. The beginning sections outline the navigation system and describe its basic operation. The later sections describe the details of the navigation functions. Chapters 9 to 13 describe how to operate the AV functions. Please read these chapters when you use a disc in the built-in DVD drive or operate the Pioneer audio equipment connected to the navigation sys­tem.
How to use this manual
Be sure to read the following descriptions
Licence Agreement (Page 5 to 9)
This provides a licence agreement of this software. Be sure to read this before using the software.
About the Data for the Map Database (Page 9)
This provides the date when the Map Database was recorded.
Copyright (Page 10)
This provides the copyright of the Map Database.
About Gracenote
This provides a licence agreement and copyright of the Gracenote to read this before using this navigation system.
®
(Page 10)
®
music recognition service. Be sure
Finding the operation procedure from what you want to do
When you have decided what you want to do, you can find the page you need from the “Table of Con­tents”.
Finding the operation procedure from a menu name
If you want to check the meaning of each item displayed on the screen, you will find the necessary page from the “Display Information” at the end of the manual.
Glossary
See the glossary to find the meaning of a term.
Index
The section at the end of this manual provides an index. See each term to find the main pages where it is stated.
1
Overview for each chapter
Before Using the System
For safety reasons, it is particularly important that you fully understand your naviga-
1 2
3 4 5 6
tion system before using it. Be sure to read this chapter.
Basic Operation
Please read this section if you want to operate the navigation system immediately. It will explain the basics of this system. This section describes the basic operations for navigation.
How to Read the Map Display
This section describes how to read the map screen, and the method of changing map view or map scale.
Modifying Map Configurations
The behaviour of your navigation system depends on the map display and guidance settings. If you need to change any of the current settings, read the relevant section of this chapter.
Setting a Route to Your Destination
This section describes various ways to search for a destination, edit the current route condi­tions and operate the route during route guidance.
Registering and Editing Locations
You can register and edit the points on the map. This chapter describes how to register a home location favourite location or other location, and how to edit the entry in “Address Book”.
7 8 9
10
2
Using Hands-free Phoning
When you are using a mobile phone featuring Bluetooth® technology by connecting the Bluetooth unit (sold separately) to the navigation system, you can operate your mobile phone hands-free. This chapter describes the operations related to hands-free phoning.
Modifying the General Settings for Navigation Functions
The behaviour of your navigation system depends a number of general settings for naviga­tion functions. If you need to change any of the initial settings (default settings), read the rel­evant section of this chapter.
Using the AV Source (Built-in DVD Drive and Radio)
This section describes how to use DVD-Videos, CDs, MP3 discs and the radio.
Using the AV Source (Music Library)
You can record a music CD to the hard disk drive in the navigation system. This chapter describes recording music and playing back the recorded music.
11 12
13 14
Using the AV Source (M-CD, iPod®, TV)
This chapter describes the audio source operation that can be used when Pioneer audio equipment featuring IP-BUS (Multi-CD player, iPod adapter, TV tuner) is connected.
Using the AV Source (AV, EXT, AUX)
This chapter describes the audio source operation that can be used when connecting AV equipment with an RCA connector (AV input), future Pioneer devices (external unit), or auxil­iary equipment (AUX).
Customising the Audio Setting related with Audio Visual
Using the audio source, various audio-visual settings are available to suit your tastes. This chapter describes how to change the settings.
Operating Your Navigation System with Voice
This section describes navigation operations, such as searching the destination and per­forming audio operations by voice.
Appendix
Please read the appendix to learn more about your navigation system and information such as the availability of after-care. Please see “Display Information” at the end of this manual to check the details for each item on the menu.
3
Terminology
Before moving on, take a few minutes to read the following information about the conventions used in this manual. They will help you greatly as you learn how to use your new equipment.
• Hardware buttons on your navigation system are described in ALL CAPITAL, BOLD lettering: e.g.) MAP button, MENU button.
• Items in the different menus or touch keys available on the screen are described in brackets [ ] and bold: e.g.) [Destination], [Settings].
• Extra information, alternative usages and other notes are presented like this: e.g.)
Touch keys which are not available at this time are greyed out.
• References to sections that describe information related to the current topics are indicated like this: e.g.)
Setting the Route Options Page 32
The tab on the right corner indicates to which operation the description is related. Nav­igation operation or AV (Audio Visual) source operation. For example, “NAVI” indicates that the description is related to the operation for navi­gation control. “NAVI/AV” indicates that the description is related to both operation for navigation control and AV control.
About the definition of terminology
“Front Display” and “Rear Display”
In this manual, the screen that is attached to the body of this navigation unit will be referred to as the “Front Display”. Any additional optional screen that is purchased for use in conjunction with this navi­gation unit will be referred to as the “Rear Display”.
“Video image”
“Video image” in this manual indicates the moving image from DVD-Video in the built-in DVD drive or from the equipment that is connected to this system with an AV-BUS or RCA cable, such as a TV tuner or general-purpose AV equipment.
Colour difference of the map display between day and night
Night display
The examples in this manual are illustrated using the daytime display. When driving at night, the colours you see may differ from those shown.
4
Licence Agreement
PIONEER AVIC-HD3
THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP.(JAPAN) (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIO­NEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. THE SOFTWARE INCLUDES A DATABASE LISENSED BY THIRD PARTY SUPPLIER(S) (“SUPPLIERS”), AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE TERMS, WHICH ARE ATTACHED TO THIS AGREEMENT (Refer to page 7). IF YOU DO NOT AGREE WITH ALL OF THESE TERMS, PLEASE RETURN THE PIONEER PRODUCTS (INCLUDING THE SOFT­WARE, AND ANY WRITTEN MATERIALS) WITHIN FIVE (5) DAYS OF RECEIPT OF THE PRODUCTS, TO THE AUTHORISED PIONEER DEALER FROM WHICH YOU PURCHASED THEM.
1. GRANT OF LICENCE
Pioneer grants to you a non-transferable, non­exclusive licence to use the software installed on the Pioneer products (the “Software”) and the related documentation solely for your own per­sonal use or for internal use by your business, only on such Pioneer products. You shall not copy, reverse engineer, translate, port, modify or make derivative works of the Soft­ware. You shall not loan, rent, disclose, publish, sell, assign, lease, sublicence, market or other­wise transfer the Software or use it in any manner not expressly authorised by this agreement. You shall not derive or attempt to derive the source code or structure of all or any portion of the Soft­ware by reverse engineering, disassembly, decompilation, or any other means. You shall not use the Software to operate a service bureau or for any other use involving the processing of data for other persons or entities. Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprietary ownership rights in the Software. The Software is copyrighted and may not be copied, even if modi­fied or merged with other products. You shall not
alter or remove any copyright notice or propri­etary legend contained in or on the Software. You may transfer all of your licence rights in the Software, the related documentation and a copy of this Licence Agreement to another party, pro­vided that the party reads and agrees to accept the terms and conditions of this Licence Agree­ment.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro­vided to you “AS IS”. PIONEER AND ITS LICEN­SOR(S) (for the purpose of provisions 2 and 3, Pioneer and its licensor(s) shall be collectively referred to as “Pioneer”) MAKES AND YOU RECEIVE NO WARRANTY, WHETHER EXPRESS OR IMPLIED, AND ALL WARRANTIES OF MER­CHANTABILITY AND FITNESS FOR ANY PARTIC­ULAR PURPOSE ARE EXPRESSLY EXCLUDED. SOME COUNTRIES DO NOT ALLOW EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. The Soft­ware is complex and may contain some non-con­formities, defects or errors. Pioneer does not warrant that the Software will meet your needs or expectations, that operation of the Software will be error free or uninterrupted, or that all non-con­formities can or will be corrected. Furthermore, Pioneer does not make any representations or warranties regarding the use or results of the use of the Software in terms of its accuracy, reliability or otherwise.
5
3. LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CLAIM OR LOSS INCURRED BY YOU (INCLUDING, WITHOUT LIMITATION, COM­PENSATORY, INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES, LOST PROFITS, LOST SALES OR BUSINESS, EXPENDITURES, INVESTMENTS, OR COMMIT­MENTS IN CONNECTION WITH ANY BUSINESS, LOSS OF ANY GOODWILL, OR DAMAGES) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF PIONEER HAS BEEN INFORMED OF, KNEW OF, OR SHOULD HAVE KNOWN OF THE LIKELIHOOD OF SUCH DAMAGES. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION IN THE AGGREGATE, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLI­GENCE, STRICT LIABILITY, MISREPRESENTA­TION, AND OTHER TORTS. IF PIONEER’S WARRANTY DISCLAIMER OR LIMITATION OF LIABILITY SET FORTH IN THIS AGREEMENT SHALL OR FOR ANY REASON WHATSOEVER BE HELD UNENFORCEABLE OR INAPPLICABLE, YOU AGREE THAT PIONEER’S LIABILITY SHALL NOT EXCEED FIFTY PERCENT (50%) OF THE PRICE PAID BY YOU FOR THE ENCLOSED PIO­NEER PRODUCT. Some countries do not allow the exclusion or lim­itation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty disclaimer and limita­tion of liability shall not be applicable to the extent that any provision of this warranty is pro­hibited by any country or local law which cannot be preempted.
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software nor any other technical data received from Pio­neer, nor the direct product thereof, will be exported outside the country or district (the “Country”) governed by the government having jurisdiction over you (the “Goverment”) except as authorised and as permitted by the laws and reg­ulations of the Goverment. If the Software has been rightfully obtained by you outside of the Country, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of the Goverment and the laws and regulations of the jurisdiction in which you obtained the Soft­ware.
5. TERMINATION
This Agreement is effective until terminated. You may terminate it at any time by destroying the Software. The Agreement also will terminate if you do not comply with any terms or conditions of this Agreement. Upon such termination, you agree to destroy the Software.
6. MISCELLANEOUS
This is the entire Agreement between Pioneer and you regarding its subject matter. No change in this Agreement shall be effective unless agreed to in writing by Pioneer. If any provision of this Agreement is declared invalid or unenforce­able, the remaining provisions of this Agreement shall remain in full force and effect.
6
Tele Atlas End User Licensing Terms
THIS IS A LEGAL AGREEMENT (THE “AGREE­MENT”) BETWEEN YOU, THE END USER, AND PIONEER and its licensors of Data product (sometimes collectively “Licensors”). BY USING YOUR COPY OF THE LICENSED DATA, YOU AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.
1. Grant of License.
Licensors grant you a non-transferable, nonexclu­sive license to use the map data and business points of interest information (the “POIs”), (together, the “Data”) contained on these discs, solely for personal, non-commercial use and not to operate a service bureau or for any other use involving the processing of data of other persons or entities. You may make one (1) copy of the Data for archival or backup purposes only but you may not otherwise copy, reproduce, modify, make derivative works, derive the structure of or reverse engineer the Data. The Data is restricted for use with the PIONEER Product(s).The Data contains confidential and proprietary information and materials, and may contain trade secrets, so you agree to hold the Data in confidence and in trust and not to disclose the Data or any portions in any form, including by renting, leasing, publish­ing, leasing, sublicensing or transferring the Data to any third party. You are explicitly prohib­ited from downloading the digital maps and pro­grammes contained in the Data or from transferring these to another data carrier or com­puter. You are prohibited from using the POIs (i) to create mailing lists or (ii) for other such similar uses.
2. Ownership.
The Data is copyrighted by the Licensors and the Licensors retain all ownership rights in the Data. You agree not to alter, remove, obliterate, or obscure any copyright notice or proprietary leg­end contained in or on the Data. The current copyrights are as follows: Data Source © 2006 Tele Atlas © BEV, GZ 1368/2003 © DAV © IGN France Michelin data © Michelin 2006 © Ordnance Survey of Northern Ireland
© Norwegian Mapping Authority, Public Roads Administration / © Mapsolutions © Swisstopo Topografische ondergrond Copyright © dienst voor het kadaster en de openbare registers, Apel­doorn 2006 “This data has been approved by Turkish Military Forces by the given authority from Councils of Ministers of Turkey”. © Roskartographia
This product includes mapping data licenced from Ordnance Survey with the permission of the Controller of Her Majesty’s Stationery Office. © Crown copyright and/or database right 2006. All rights reserved. Licence number 100026920.
3. Warranty Disclaimer.
THE DATA IS PROVIDED ON AN “AS IS” AND “WITH ALL FAULTS BASIS” AND PIONEER, ITS LICENSORS, AND ITS LICENSED DISTRIBUTORS AND SUPPLIERS (COLLECTIVELY, “SUPPLI­ERS”) EXPRESSLY DISCLAIM ALL OTHER WAR­RANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRAN­TIES OF NON-INFRINGEMENT, MERCHANTABIL­ITY, EFFECTIVENESS, COMPLETENESS, ACCURACY, TITLE AND FITNESS FOR A PARTIC­ULAR PURPOSE. PIONEER, ITS LICENSORS AND SUPPLIERS DO NOT WARRANT THAT THE DATA WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE DATA WILL BE UNINTERRUPTED OR ERROR FREE. NO ORAL OR WRITTEN ADVICE GIVEN BY PIONEER, ITS LICENSORS, SUPPLIERS OR ANY OF THEIR RESPECTIVE EMPLOYEES CREATES A WAR­RANTY OR IN ANY WAY INCREASES PIONEER’, ITS LICENSORS OR SUPPLIERS LIABILITY AND YOU MAY NOT RELY ON ANY SUCH INFORMA­TION OR ADVICE. THIS DISCLAIMER IS AN ESSENTIAL CONDITION OF THIS AGREEMENT AND YOU ACCEPT THE DATA ON THIS BASIS.
4. Limitation of Liability.
IN NO EVENT SHALL PIONEER, ITS LICENSORS’ OR SUPPLIER’ AGGREGATE LIABILITY FOR ALL MATTERS ARISING OUT OF THE SUBJECT MAT­TER OF THIS AGREEMENT, WHETHER IN CON­TRACT, TORT OR OTHERWISE, EXCEED THE
7
AMOUNT PAID BY YOU FOR YOUR COPY OF THE PIONEER DATA. PIONEER, ITS LICENSORS AND SUPPLIERS SHALL NOT BE LIABLE IN ANY MAT­TER TO YOU FOR ANY SPECIAL, INDIRECT, CON­SEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSI­NESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THIS AGREEMENT OR THE USE OF OR INABILITY TO USE THE DATA, EVEN IF PIONEER, ITS LICENSORS OR SUPPLI­ERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
5. Termination.
This Agreement will terminate immediately and automatically, without notice, if you breach any term of this Agreement. You agree that in the event of termination of the Agreement, you shall return the Data (including all documentation and all copies) to PIONEER and its suppliers.
6. Indemnity.
You agree to indemnify, defend and hold PIO­NEER, its Licensors, and its suppliers (including their respective licensors, suppliers, assignees, subsidiaries, affiliated companies, and the respective officers, directors, employees, share­holders, agents and representatives) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney's fees, arising out of or in connection with any use or possession by you of the Data.
7. Additional Provisions with respect to
the Great Britain Data and Northern Ire­land data only.
a. You are prohibited from removing or obscuring
of any copyright, trademark or restrictive leg­end belonging to Ordnance Survey.
b. The Data may include the data of licensors,
including Ordnance Survey. Such Data is pro­vided on an “AS IS” AND “WITH ALL FAULTS BASIS” and the licensors EXPRESSLY DIS­CLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON­INFRINGE-MENT, MERCHANTABILITY, QUAL-
8
ITY, EFFECTIVENESS, COMPLETENESS, ACCU­RACY, TITLE AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE DATA PRODUCT RESTS WITH YOU. ORD­NANCE SURVEY DOES NOT WARRANT THAT THE DATA WILL MEET YOUR REQUIRE­MENTS, OR COMPLETE OR ACCURATE OR UP TO DATE OR ACCURATE OR THAT THE OPERATION OF THE DATA WILL BE UNINTER­RUPTED OR ERROR FREE. NO ORAL OR WRITTEN ADVICE GIVEN BY ORDNANCE SUR­VEY, PIONEER OR ITS LICENSORS AND EMPLOYEES CREATES A WARRANTY OR IN ANY WAY INCREASES ORDNANCE SURVEY’S LIABILITY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR ADVICE. This is an essential condition of the Agreement and You accept the Data on that basis.
c. IN NO EVENT SHALL ORDNANCE SURVEY BE
LIABLE TO YOU FOR MATTERS ARISING OUT OF THE SUBJECT MATTER OF THE AGREE­MENTS, WHETHER IN CONTRACT, TORT OR OTHERWISE. THE LICENSORS SHALL NOT BE LIABLE TO YOU FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAM­AGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUP­TION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE AGREE­MENT OR THE USE OF OR INABILITY TO USE THE DATA, EVEN IF THEY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
d. You are prohibited from using the Data in any
printed, published form that results in deriva­tive products to be distributed freely or sold to the public without the prior permission of Ord­nance Survey.
e. You shall indemnify and hold harmless Ord-
nance Survey from and against any claim, demand or action, irrespective of the nature of the claim, demand or action alleging loss, costs, damages, expenses, or injury (including injury from death) resulting from your autho­rized or unauthorized use, possession, modifi­cation, or alteration of the Data.
f. End User accepts the obligation to, on request,
provide Ordnance Survey with information on what products and/or services containing and/
or derived from the Licensed Products they produce.
g. You are liable to Ordnance Survey in the event
of discovery of breach of the aforementioned contractual terms.
8. Additional Provisions with respect to the Denmark Data only.
You shall be prohibited from using the Data to create maps within telephone books, telephone books or other products similar to telephone books (e.g. directories), including such products in digital form.
9. Additional Provisions with respect to the Norway Data only.
You shall be prohibited from using the Data to create general purpose printed or digital maps, which are similar to the basic national products of the Norwegian Mapping Authority. (Any deriv­ative product of the Data of Norway shall be regarded as similar to the basic national prod­ucts of the Norwegian Mapping Authority if such derivative product has a regional or national cov­erage, and at the same time has a content, scale and format that are similar to the basic national products of the Norwegian Mapping Authority.)
stricken from this Agreement and the remainder of this Agreement shall be valid, legal, and enforceable to the maximum extent possible. Any notice under this Agreement shall be delivered by courier to PIONEER, Attention Legal Department.
About the Data for the Map Database
• This database was developed and recorded up to Octover 2005. Changes to streets/highways made after that time may not be reflected in this database.
• It is strictly prohibited to reproduce and use any part or the whole of this map in any form without permission from the copyright owner.
• If the local traffic regulations or conditions deviate from this data, follow the local traffic regulations (such as signs, indications, etc.) and conditions (such as construction, weather, etc.).
• The traffic regulation data used in the map database applies only to standard sized pas­senger vehicles. Note that regulations for larger vehicles, motorbikes, and other non­standard vehicles are not included in the data­base.
10. Additional Provisions with respect to the Poland Data only.
You shall be prohibited from using the Data to create printed maps.
11. Miscellaneous.
This is the exclusive and complete Agreement between the Licensors and you regarding its sub­ject matter. Nothing in this Agreement shall cre­ate a joint venture, partnership or principal-agent relationship between the Licensors and you. The internal laws of Sections 2 - 4 and 6 - 11 shall sur­vive the expiration or termination of this Agree­ment. This Agreement may be amended, altered, or modified only by PIONEER. You may not assign any part of this Agreement without PIONEER’ prior written consent. You acknowledge and understand that the Data may be subject to restrictions on exportation and agree to comply with any applicable export laws. In the event that any provision or part of a provision of this Agree­ment is determined to be invalid, illegal, or unen­forceable, such provision or part thereof shall be
9
Copyright
End-User License Agreement
Data Source © 2006 Tele Atlas © BEV, GZ 1368/2003 © DAV © IGN France Michelin data © Michelin 2006 © Ordnance Survey of Northern Ireland © Norwegian Mapping Authority, Public Roads Administration / © Mapsolutions © Swisstopo Topografische ondergrond Copyright © dienst voor het kadaster en de openbare registers, Apel­doorn 2006 “This data has been approved by Turkish Military Forces by the given authority from Councils of Ministers of Turkey”. © Roskartographia
This product includes mapping data licenced from Ordnance Survey with the permission of the Controller of Her Majesty’s Stationery Office. © Crown copyright and/or database right 2006. All rights reserved. Licence number 100026920.
© 2006 INCREMENT P CORP. ALL RIGHTS RESERVED
About Gracenote
Music recognition technology and related data are pro­vided by Gracenote in music recognition technology and related content delivery. For more information visit www.gracenote.com.
CD and music-related data from Gracenote, Inc., copy­right © 2000-2006 Gracenote. Gracenote Software, copy­right © 2000-2006 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523. Gracenote and CDDB are registered trade­marks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote.
®
®
. Gracenote is the industry standard
USE OF THIS PRODUCT IMPLIES ACCEPTANCE OF THE TERMS BELOW.
Gracenote® MusicID® Terms of Use
This device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this appli­cation to do online disc identification and obtain music­related information, including name, artist, track, and title information (“Gracenote Data”) from online servers (“Gracenote Servers”) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Soft­ware or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERV­ERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote MusicID Service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote MusicID service to count queries without knowing anything about who you are. For more informa­tion, see the web page for the Gracenote Privacy Policy for the Gracenote MusicID Service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems suf­ficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninter­rupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to dis­continue its online services at any time.
10
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FIT­NESS FOR A PARTICULAR PURPOSE, TITLE, AND NON­INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES.
© Gracenote 2006 Version 2.2
Other Precautions
• Part of the data cannot be acquired. The con­tents of the data in the Gracenote included in the hard disk drive are not 100% guaranteed.
•The Gracenote
®
Database included in the hard disk drive contains the titles for the 300 000 most frequently accessed albums worldwide as of 2006 August.
®
Database
11
Table of Contents
Introduction
Manual Overview 1
How to use this manual 1 Overview for each chapter 2 Terminology 4 About the definition of terminology 4 Colour difference of the map display between
day and night 4
Licence Agreement 5
PIONEER AVIC-HD3 5 Tele Atlas End User Licensing Terms 7
About the Data for the Map Database 9 Copyright 10 About Gracenote® 10
End-User License Agreement 10 Other Precautions 11
Table of Contents 12
Checking the entire route overview on the
map 34
Editing Waypoints 34
Adding a waypoint 34 Deleting a waypoint 35 Sorting waypoints 35 Skipping a waypoint 35
Chapter 3
How to Read the Map Display
How to Use the Map 37
Switching the view mode 37 How to view the map of the current location 37 Roads without turn-by-turn instructions 40 Changing the scale of the map 41 Scroll the map to the location you want to
see 41
Shortcut menu 42
Setting the Vehicle Dynamics Display 43
Chapter 1
Before Using the System
Important Safety Information 17 Additional Safety Information 18
To ensure safe driving 18
Features (Characteristics of this software) 19 Notes for Hard Disk Drive 20
Recording equipment and copyright 20 Notes when writing data to the hard disk drive at
low temperature 20
Points about recording 20 Data saved or recorded by the customer 20
In Case of Trouble 21 Visit Our Website 21
Chapter 2
Basic Operation
Flow from Startup to Termination 23 How to Use Navigation Menu Screens 24
Displaying the Navigation menu 24 Navigation menu overview 24
Basic Navigation 25
Calculating your destination by using Address
Search 26
Checking and modifying the route 30 When the route guidance starts 31
Cancelling the Route Guidance 31 Modifying the Route Calculation Conditions 32
Items that users can operate 32
Checking the Current Route 33
Checking the route by text 33
Chapter 4
Modifying Map Configurations
Entering the Map Menu 45 Setting the Item on the Map Screen 45 Selecting the Shortcut 46 Displaying POI on the Map 47 Viewing the Map Colour Legend 48 Changing the View Mode for the Navigation
Map 48
Setting the Map Colour Change between Day and
Night 48
Changing the Setting of Navigation Interruption
Screen 49
Changing the Map Colour 49
Chapter 5
Setting a Route to Your Destination
Searching for Points of Interest (POI) 51
Searching for a POI directly from the name of
the facilities 51
Searching for POIs by specifying a category
first 52
Searching for POIs by specifying a city name
first 53
Finding a POI in the Vicinity 53
Searching for the facilities around the current
position 53
Searching for the facilities around the scroll
cursor 54
Finding Your Destination by Specifying the
Postcode 55
12
Route Calculation to Your Home Location or to
Your Favourite Location 55
Selecting Destination from the Destination Histo-
ry and Address Book 56
Registering/deleting POI Shortcuts 56
Registering a POI shortcut 56 Deleting a POI shortcut 57
Chapter 6
Registering and Editing Locations
Registering Locations Overview 59 Registering Your Home and Your Favourite
Location 59
Registering a location into Address Book 60
Registering a location by scroll mode 60 Registering a location by Address Book 60 Viewing the Address Book 61 Editing the entry in “Address Book” 61 Deleting the entry in “Address Book” 65
Destination History Operations 65
Deleting the entry in “Destination History” 66
Chapter 7
Using Hands-free Phoning
Hands-free Phoning Overview 67
Preparing communication devices 67 Setting up for hands-free phoning 68 Receiving a phone call 70 Making a phone call 70 Transferring the phone book 73 Registering a phone number in “Dial
Favourites” 73 Editing the entry in “Phone Book” 74 Editing the received call or dialled number
history 75
Chapter 8
Modifying the General Settings for Navigation Functions
Entering the Settings Menu 79 Setting the Volume for Guidance and Phone 79 Customising the Regional Settings 79
Changing the language for navigation guidance
and menu 79 Setting the time difference 80 Setting the keyboard layout 80 Changing the unit between km and miles 81 Changing the virtual speed of the vehicle 81
Checking the Setting Related with Hardware 81
Checking the connections of leads and installa-
tion positions 81
Checking sensor learning status and driving
status 82 Correcting the installation angle 83 Checking the device and version
information 83 Checking the hard disk information 83
Registering the Home Location and Favourite
Location 84
Changing the Background Picture 84 Using the Demonstration Guidance 86 Correcting the Current Location 86 Restoring the Default Setting 86
Chapter 9
Using the AV Source (Built-in DVD Drive and Radio)
Basic Operation 87
Switching the Audio operation screen 87 Selecting a source 87 About Steering Remote Control 88 How to see the audio operation screen and how
to display the Audio Settings menu 89
Operating the Music CD 90
Selecting [CD] as the source 90 About auto hard disk recording 90 Screen configuration 90 Touch key operation 91
Operating the CD-ROM (MP3 disc) 92
Selecting [ROM] as the source 92 Screen configuration 92 Touch key operation 92 Notes on playing MP3 disc 94
Operating the DVD 94
Selecting [DVD] as the source 94 Screen configuration 94 Touch key operation 95 Searching for a desired scene, starting play-
back from a specified time 96 Entering the numerical commands 97
Operating the Radio (FM) 97
Selecting [FM] as the source 97 Screen configuration 97 Touch key operation 98 Storing the strongest broadcast frequencies 99 Tuning in strong signals 99 Using radio text 99 Searching for an RDS station by PTY
information 100 Receiving traffic announcements 100 Using news programme interruption 101 Receiving PTY alarm broadcasts 101 Selecting alternative frequencies (AF) 101 Using PI Seek 102 Using Auto PI Seek for preset stations 102 Limiting stations to regional programming 102 PTY list 103
13
Operating the Radio (AM) 104
Selecting [AM] as the source 104 Screen configuration 104 Touch key operation 104 Storing the strongest broadcast
frequencies 105
Tuning in strong signals 105
Chapter 10
Using the AV Source (Music Li­brary)
Music Library Recording 107
Recording all tracks in a CD 108 Recording a CD manually 108 Recording only the first track of a CD 108 Stopping CD recording 108 Notes on CD recording 109
Music Library Play 109
Selecting [LIBRARY] as the source 109 Screen configuration 109 Touch key operation 110 Creating a playlist with a customised order 112 Editing a playlist or tracks 113 Assigning another candidate for title
information 118
Chapter 11
Using the AV Source (M-CD, iPod®, TV)
Operating the Multi-CD Player 119
Selecting [M-CD] as the source 119 Screen configuration 119 Touch key operation 119
Operating the iPod® 121
Selecting [iPod] as the source 121 Screen configuration 121 Touch key operation 121 Browsing for a song 122
Operating the TV tuner 123
Selecting [TV] as the source 123 Screen configuration 123 Touch key operation 123 Storing and recalling broadcast stations 124 Storing the strongest broadcast stations
sequentially 124
Selecting the country group 124
Chapter 12
Using the AV Source (AV, EXT, AUX)
Operating the AV Input source (AV) 125
Selecting [AV INPUT] as the source 125
Operating the External Unit (EXT) 125
14
Selecting [EXT 1] or [EXT 2] as the source 125 Screen configuration 125 Touch key operation 125 Operate the external unit by using 1 key — 6
key 126
Operate the external unit by using Function 1 —
Function 4 126
Switching the automatic and manual
function 126
Operating the AUX input source (AUX) 127
Selecting [AUX] as the source 127
Chapter 13
Customising the Audio Setting re­lated with Audio Visual
AV Setting Overview 129
How to Operate the Audio Settings screen 129
Customising the Audio Settings Items 129
Using the equaliser 129 Setting the simulated sound stage 131 Using balance adjustment 131 Using subwoofer output 132 Using non fading output 132 Adjusting loudness 132 Using the high pass filter 132 Adjusting source levels 133
Customising the System Settings Items 133
How to view and operate the System
Settings 133 Setting up the built-in DVD drive 134 Changing the wide screen mode 135 Setting for rear view camera 136 Setting the video input 136 Switching the auxiliary setting 137 Switching the muting/attenuation timing 137 Switching the muting/attenuation level 137 Changing the voice output of the navigation
guidance 138 Switching the auto aerial setting 138 Setting the clock display on the video
image 138 Setting the CD recording mode 138 Setting the rear output and subwoofer
controller 138 Switching Auto PI seek 139 Setting the FM tuning step 139 Selecting the TV signal 139
Other Functions 139
Selecting the video for “Rear display” 139 Operating the picture adjustment 140 Switching the backlight on or off 141
Language Code Chart for DVD 142
Chapter 14
Operating Your Navigation System with Voice
To Ensure Safe Driving 143 Basics of Voice Operation 143
Flow of voice operation 143 To start voice operation 144
Tips for Voice Operation 145 An Example of Voice Operation 145
Search for POI in vicinity 145 Search for the playlist 146
Available Voice Commands 147
Voice commands related to navigation 148 Voice commands related to AV operation 150 Location screen (A) and (B) 151
Other Voice Commands 152
Other voice commands for navigation
operation 152 Other voice commands for AV operation 154 Category list for vicinity search 155
Appendix
Returning the Navigation System to the Default or
Factory Settings 157 Setting items to be deleted 158
If system errors frequently occur 159 Completely returning the navigation system to
the initial state 159
Adjusting the Response Positions of the Touch
Panels (Touch Panel Calibration) 160
Positioning Technology 161
Positioning by GPS 161 Positioning by dead reckoning 161 How do GPS and dead reckoning work
together? 162
Handling Large Errors 163
When the positioning by GPS is impossible 163
Vehicles that Cannot Obtain Speed Pulse
Data 163
Conditions Likely to Cause Noticeable Positioning
Errors 163
Troubleshooting 166
Problems in the screen 166
Messages and How to React to Them 171
Messages for navigation functions 171
Messages for Audio Functions 174
Built-in DVD drive 174 Hard disk drive (Music Library) 175 Other sources 175
When the Hard Disk Drive is Disconnected 176 Route Setting Information 176
Route search specifications 176
Route highlighting 177 Tracking 177 Displaying POI 177
Detail Information for Playable Media 177
DVD discs and other DVD media types 177 About playing Dual Disc 178 CD-R/CD-RW discs 178 MP3 files 178
Glossary 180 Display Information 183
Navigation menu 183 Shortcut menu 186
Menu in the Audio Screen 187
Audio Settings menu 187 System Settings menu (Page 1) 187 System Settings menu (Page 2) 187
Index 188
15
16
Before Using the System
Chapter 1
Important Safety Information
Before using your navigation system, be sure to read and fully understand the following safety information:
• Do not attempt to install or service your navigation system by yourself. Installation or servicing of the navigation system by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards.
• When a route is calculated, the route and voice guidance for the route is automati­cally set. Also, for day or time traffic regu­lations, only information about traffic regulations at the time when the route was calculated is shown. One-way streets and street closures may not be taken into con­sideration. For example, if a street is open during the morning only, but you arrive later, it would be against the traffic regula­tions so you cannot drive along the set route. When driving, please follow the actual traffic signs. Also, the system may not know some traffic regulations.
Read the entire manual before operating this
navigation system.
The navigation features of your navigation sys-
tem (and rear view camera option if pur­chased) are intended solely as an aid to you in the operation of your vehicle. It is not a substi­tute for your attentiveness, judgement and care when driving.
Do not operate this navigation system (or the
rear view camera option if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all exist­ing traffic regulations. If you experience diffi­culty in operating the system or reading the display, park your vehicle in a safe location and apply the handbrake before making the necessary adjustments.
Never allow others to use the system unless
they have read and understood the operating instructions.
Never use this navigation system to route to
hospitals, police stations or similar facilities in an emergency. Stop using any functions relat­ing to the hands-free phone and please call the appropriate emergency number.
Route and guidance information displayed by
this equipment is for reference purposes only. It may not accurately reflect the latest permis­sible routes, road conditions, one way streets, road closures or traffic restrictions.
Traffic restrictions and advisories currently in
force should always take precedence over guidance given by the navigation system. Always obey current traffic restrictions, even if the navigation system provides contrary advice.
Failure to set correct information about the
local time may result in the navigation system providing improper routing and guidance instructions.
Never set the volume of your navigation sys-
tem so high that you cannot hear outside traf­fic and emergency vehicles.
To promote safety, certain functions are disa-
bled unless the vehicle is stopped and/or the handbrake is applied.
The data encoded in the hard disk drive for the
navigation system is the intellectual property of the provider, and the provider is responsible for such content.
17
Chapter 1 Before Using the SystemNAVI/AV
Keep this manual handy as a reference for
operating procedures and safety information.
Pay close attention to all warnings in this
manual and follow the instructions carefully.
Do not install this navigation system where it
may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operat­ing systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.
Please remember to wear your seat belt at all
times while operating your vehicle. If you are ever in an accident, your injuries can be con­siderably more severe if your seat belt is not properly buckled.
Never use headphones while driving.
Chapter 1
Before Using the System NAVI/AV
Additional Safety Information
To ensure safe driving
Handbrake interlock
Certain functions (such as viewing of DVD video and certain touch key operations) offered by this navigation system could be dangerous and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the handbrake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and apply the handbrake. Please keep the brake pedal pushed down before releasing the hand­brake.
• To avoid the risk of damage and injury and the potential violation of applicable laws, the navigation system is not for use with a “Video image” that is visible to the driver.
• In some countries the viewing of “Video image” on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed.
• When applying the handbrake in order to view “Video image” or to enable other functions offered by the navigation sys­tem, park your vehicle in a safe place, and keep the brake pedal pushed down before releasing the handbrake if the vehicle is parked on a hill or otherwise might move when releasing the handbrake.
18
• Accuracy/performance of interlock may be impacted by such factors as GPS signal detection, speed pulse wire connectivity, and driving habits or conditions of the place where the vehicle is parked.
• It is strongly suggested that the speed pulse wire be connected for accuracy of navigation and better performance of interlock.
• If the speed pulse wire is unavailable for some reason, it is recommended that the pulse generator ND-PG1 (sold separately) be used.
When you attempt to watch “Video image” while driving, the warning “Viewing of front seat
video source while driving is strictly prohib­ited.” will appear on the screen. To watch “Video
image” on this display, stop the vehicle in a safe place and apply the handbrake. Please keep the brake pedal pushed down before releasing the handbrake.
Rear view camera and [Rear View] mode
With an optional rear view camera, you are able to use the navigation system as an aid to keep an eye on trailers or to back into a tight parking spot.
• SCREEN IMAGE MAY APPEAR REVERSED.
• USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
Features (Characteristics of this software)
Touch panel key operation
It is possible to operate the navigation functions and the Audio functions by using touch panel keys.
Variety of View Modes
Various types of screen display can be selected for navigation guidance.
Chapter 1 Before Using the SystemNAVI/AV
• The rear view mode is to use the naviga­tion system as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.
Wide variety of facility information for Points of Interest (POI) search
You can search for your destination from all areas. – Approximately 15 000 POIs are included in the database. – Some POI information may not be accurate or may become inaccurate through the passage of time. Please directly contact the POI to verify the accuracy of the information about the POI which appears in this database. POI information is sub­ject to change without notice.
Auto Reroute Function
If you deviate from the set route, the system will re-calculate the route from that point so that you remain on track to the destination.
This function may not work in certain areas.
Auto CD title and MP3 file listing
Title lists are automatically displayed when a CD or MP3 disc is played. This system provides easy­to-operate audio functions that allow playback simply by selecting an item from the list.
19
Compatible voice recognition system
Connecting the supplied microphone will enable voice operation for both the navigation and AV functions.
Original Image assignment
You can store your own pictures on a CD-R in JPEG format and import original images in this navigation system. These imported images can be set as a background or splash screen, or as a picture in an address book or phone book entry.
Station name auto display
While tuning to an RDS station, you can display a list of the stations you are receiving by the pro­gramme service names. This facilitates selection of stations. If the system cannot receive the programme ser­vice name, the frequency will be displayed
Chapter 1
instead.
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta­tions broadcasting RDS signals. Even if the navigation system is receiving an RDS station, not all the functions related to RDS are avail­able.
Notes for Hard Disk Drive
Before Using the System NAVI/AV
Recording equipment and copy­right
Recording equipment should be used only for lawful copying and you are advised to check care­fully what defines lawful copying in the country in which you are making a copy. Copying of copy­right material such as films or music is unlawful unless permitted by a legal exception or con­sented to by the right owners.
system may be booted up with the preliminary mode because the system can not recognise the hard disk drive.
“When the Hard Disk Drive is Disconnected”
Page 176
Points about recording
Pioneer does not compensate for the contents
that could not be recorded or any loss of recorded data due to a malfunction or failure of the navigation system.
The data recorded on the navigation system is
not allowed to be used without permission from its right holder under copyright law, except for personal entertainment.
Make sure to check the recording operation
before recording and check the recorded con­tents after recording.
Recording is not guaranteed for all CDs.
Data saved or recorded by the customer
The data saved or recorded onto this naviga-
tion system by the customer cannot be extracted from the navigation system, and those services cannot be accepted.
The data saved or recorded onto this naviga-
tion system by the customer cannot be guar­anteed during repair or service. Lost data that was saved or recorded by the customer is not guaranteed.
Due to copyrights, the music data recorded
into the Music Library cannot be backed up during repair or service.
Notes when writing data to the hard disk drive at low tempera­ture
Writing to the hard disk drive, such as recording music to the music library, may be disabled when the navigation system detects abnormally low temperatures inside the vehicle. Functionality will become available once the temperature inside the vehicle returns to normal. Additionally, if the low temperature continues for a long time, the
20
In Case of Trouble
Should the navigation system fail to operate prop­erly, contact your dealer or nearest authorised Pioneer Service Station.
Visit Our Website
Visit us at the following site:
• Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.
Chapter 1 Before Using the SystemNAVI/AV
21
Chapter 1
Before Using the System NAVI/AV
22
Basic Operation
Chapter 2
NAVI Chapter 2 Basic Operation
Flow from Startup to Termina­tion
At first, please confirm the positions of the follow­ing features using the “Hardware Manual”.
MAP button
MENU button
AV button
OPEN CLOSE button
1 Start the engine to boot up the system.
After a short pause, the navigation splash screen comes on for a few seconds.
When you use the navigation system for the first time, the [Regional Settings] screen appears. On the [Regional Settings] screen, you can change the language or time. (The settings can also be changed afterward.) Touch [Language] ( ) to select the language to be used for the navigation function.
“Customising the Regional Settings”
Page 79
2 Check the details of the caution message
and touch [OK].
You can operate the navigation system by touching keys displayed on the screen. The map of your surroundings is displayed. If the route is already set, the screen changes to route guidance mode. How to read the current position screen
Page 37
Setting the time Page 80To protect the LCD screen from damage,
be sure to touch the touch keys with a fin­ger. (The stylus is supplied for special cali­brations. Do not use the stylus for normal operations.)
4 Assign a destination by using the touch
panel key and beginning route guidance, or by operating the Audio source.
Touch keys that are not available at this
time are inactive.
Specifying the address and searching the
destination Page 26
Searching the destination by map
Page 42
Other search methods Page 51 to 56How to use audio source Page 87 to 142
5 Turn off the vehicle engine to terminate
the system.
The navigation system is also turned off. Until your vehicle reaches the vicinity of
the destination, the set route will not be deleted even if the engine is turned off.
3 Press the MENU button.
This displays the navigation menu.
23
How to Use Navigation Menu Screens
The basic navigation is performed by using menus. The navigation menu is divided into four menus: [Destination], [Info/Phone], [Map], and [Settings].
Displaying the Navigation menu
1 Press the MENU button.
2 To change to the menu you want to use,
touch the name of the menu displayed at the top of the screen.
3 If you want to return to the map, press the
MENU button.
Navigation menu overview
[Destination] menu
Chapter 2
You can search your destination in this menu.
Basic Operation NAVI
Also you can check your route, and the set route can be cancelled from this menu.
Specifying the address and searching for the
destination Page 26
Other search methods Page 51 to 56
[Info/Phone] menu
If you are using the mobile phone featuring Blue­tooth technology by connecting the Bluetooth unit (ND-BT1) (sold separately) to the navigation system, you can configure Bluetooth settings or check the outgoing/incoming call history.
[Phone Menu] is active only when the Blue-
tooth unit (ND-BT1) is connected to the navi­gation system.
[Map] menu
You can change the [View Mode], or set the items to be displayed during the navigation func­tion.
[View Mode] can be selected only when the
vehicle position is at the current position. If you want to select [View Mode] while scroll­ing the map, press the MAP button to center the current position back on the vehicle posi­tion.
24
[Settings] menu
Customise the navigation functions so they can be used easily.
Settings menu Chapter 8
Buttons you can use
The availability of a specific button or function is indicated by its appearance. Depending on the status of your vehicle, some buttons will be avail­able, while others will not be.
Basic Navigation
• For safety reasons, you cannot use some of these basic navigation functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the handbrake (see page 18 Interlock for details).
Basic flow of operation
1 Park your vehicle in a safe place and
apply the handbrake.
2 Press the MENU button to display the
navigation menu.
Chapter 2 Basic OperationNAVI
Active touch key: The button is operable.
Inactive touch key: The function is not available (e.g., operation is prohibited while driving).
3 Select the method of searching for your
destination.
4 Enter the information about your desti-
nation to calculate route.
5 Confirm the location on the map.
6 Check and decide the route.
7 Your navigation system sets the route to
your destination, and the map of your surroundings appears.
8 After releasing the handbrake, drive in
accordance with the navigation informa­tion, subject to the important safety instructions noted on pages 17 to 19.
25
Calculating your destination by using Address Search
The most frequently used function is [Address Search], in which the address is specified and
the destination is searched. This section describes how to use [Address Search] and the basics of using the navigation system.
1 Press the MENU button to display the
navigation menu.
When entering the characters, the system
will automatically search the database for all possible options. If there is only one let­ter that could possibly follow your entry, that letter will automatically be entered.
A list appears if multiple options exist,
select the desired one from the list, and proceed to the next step. In rare cases, you may need to input the city name to deter­mine the city.
2 Touch [Destination] in the navigation
menu.
3 Touch [Address Search].
Select the method for searching the destina­tion.
Chapter 2
4 Input the street name.
Basic Operation NAVI
When the options are narrowed down to six or less, a list of the matching streets automati­cally appears. When you enter the same characters as those entered previously, the system automatically displays the characters that follow the entered characters. (Auto fill-in function)
Refine location with metro station name
1 Enter the metro station name in the
[City] text box.
2 Select the metro station name from
the list.
3 Touch [Centre].
“Location confirmation screen” appears. “Checking the location on the map”
Page 29
26
Operation of street name or city name input screen (e.g. Cyrillic keyboard)
(7)
(10)
(8)
(9)
(3) (6)
(11)
(4) (1)
(2) (5)
(1) [OK]:
Confirms the characters displayed in (3), and proceeds to the next step.
(2) [List]:
Lists candidates based on yellow characters in (3). Touch the desired item in the list to pro­ceed to the next step.
(3) Text box:
Displays the characters that are entered.
(4) Keyboard:
Use to enter the text.
(5) [Back]:
Returns previous screen.
(6) :
Deletes the input text one letter at a time from the end of the text. Continuing to touch deletes all of the text.
(7) [City]:
Touch if you want to specify the destination city or area first. (This is available only when street name is blank.)
(8) [Sym.], [0-9]:
Input text with marks such as [&] or [+] or numbers.
Touch to toggle the selection.
(9) [ABC], [АБВГ]:
Toggle the keyboard between Latin letters (A – Z, a - z) and Cyrillic letters.
Touch to toggle the selection.
(10) [Street]:
Touch if you want to return the street input mode. (This is available only when city name is blank.)
(11) [Centre]:
This can be selected when you enter a city or area name first. Touch this button to display the central point of the entered city or area. Touching [OK] searches the route to the cen­tral point. Proceed to Step 8.
You can set the layout of the keyboard.
“Setting the keyboard layout” Page 80
Auto fill-in function
Chapter 2 Basic OperationNAVI
The previously entered characters are stored for each country and each search function. The next time a character is entered, sug­gested characters will be shown. For exam­ple, if [ДОКУЧАЕВ ПЕРЕУЛОК] has been entered in the past, when you input just the letter [Д], [ДОКУЧАЕВ ПЕРЕУЛОК] will be fill-in automatically. The manually input char­acters are displayed in yellow, and the sug­gested characters are displayed in white, so you can distinguish them. To determine the filled-in character, touch [OK].
27
5 Touch the street from the list.
If the selected street has only one matching location, “Route confirmation screen” appears. Proceed to Step 8.
6 Touch the city or area where your destina-
tion is located.
7 Input the house number and touch [OK].
Touch the characters you want to input.
Chapter 2
Route calculation starts.
When the route calculation is completed, “Route confirmation screen” appears.
Basic Operation NAVI
When a route is not set, route calculation starts immediately. “Checking and modifying the route”
Page 30 When a route is already set, “Location confir­mation screen” is shown.
“Checking the location on the map”
Page 29 If you touch [OK] with no input, the central
point of the house number range is dis-
played and “Location confirmation screen”
appears.
28
Loading...
+ 164 hidden pages