Pioneer AVIC F9770 BT, AVIC F970 BT, AVIC F77 DAB, AVIC F9770 DAB, AVIC F970 DAB Operation Manual

Page 1

Operation Manual

NAVIGATION AV SYSTEM

AVIC-F77DAB AVIC-F70DAB AVIC-F970DAB AVIC-F970BT AVIC-F9770DAB AVIC-F9770BT

Be sure to read Important Information for the User first! Important Information for the User includes the important information that you must understand before using this product.

English

Page 2

Contents

Thank you for buying this Pioneer product.

Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a

safe place for future reference.

– When the Application screen is

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.

Introduction Manual overview 10

– How to use this manual 10 – Conventions used in this manual 10 – Terms used in this manual 10

Notes on internal memory 11

– Before removing the vehicle

battery 11

– Data subject to erasure 11 – Resetting the microprocessor 11

Basic operation

Checking part names and functions 12 Protecting your product against theft 13

– Removing the detachable

faceplate 13

– Attaching the detachable faceplate 13 Notes on using the LCD panel 14 Adjusting the LCD panel angle 14 Inserting/ejecting/connecting media 14

– Inserting and ejecting a disc 15

– Inserting and ejecting an SD memory

card 15

– Connecting and disconnecting an

iPod 16

– Plugging and unplugging a USB

storage device 16 Startup and termination 16 On first-time startup 16 Regular startup 17

– A message about the map

database 17 Turning off the display 17

available 17

– When the Application screen is not

available 17

How to use the screens 18

– Switching screens using the touch

panel keys 18

– Switching screens using the hardware

buttons 19 Supported AV source 20 Displaying the AV operation screen 20

– Selecting a front source on the AV

source selection screen 21

– Selecting a front source on the source

list 21

– Selecting a rear source 21 Turning off the AV source 21 Changing the display order of source

icons 21

Changing the display order of source

keys 22

Using the touch panel 22

– Using the common touch panel

keys 22

– Operating list screens 23

– Operating the time bar 23

– Operating the on-screen keyboard 23

On first-time startup of the navigation

system 24

How to use the Navigation menu screen Operating the Navigation menu screen 25

How to use the map

How to read the Map screen 27 AV information bar 27 Operating the Map screen 28

– Changing the scale of the map 28

– Smart Zoom 28

– Switching between 2D, 3D, and 2D

North up views 28

– Scrolling the map to the position you

want to see 29

Engb

Page 3

Contents

– Control keys on the scrolled map 29

Understanding the route guidance 30

– Frequently shown route events 30

Browsing the data field 31

– When the system cannot receive a GPS

signal 31

Searching for a destination

Searching for a location by address 33 Searching for Points of Interest (POI) 34

– Searching for POIs using preset

categories 34

– Searching for POIs by categories or

directly from the name of the facilities 35

– Searching for providers nearby that

offer emergency or roadside assistance services 36

Selecting a destination from stored

locations 37

Selecting a destination from stored

routes 37

Selecting a location you searched for

recently 38

– History 38 – Smart History 38

Searching for a location using “Combined

Search” 39

Searching for a location by the

coordinates 40

Searching for a location by scrolling the

map 40

Using the “Map Location” screen 41

Checking and modifying the current route Modifying the route 42

– Building a route using “Route

Planner” 42

– Adding waypoints 43 – Checking route alternatives 43 – Checking detour routes 44

– Checking route information and

preferences 44

– Cancelling the current route

guidance 45

– Watching the simulation of the

route 46

Registering and editing locations and routes

Storing a location in “Saved Location” 47

– Storing your home and your workplace

location 47

– Storing your favourite locations 47 – Editing stored locations 47

Storing a route in “Saved Routes” 48 Editing the stored route 49

– Renaming stored routes 49 – Deleting stored routes 49

Saving a location as an alert point 49 Editing the stored alert points 50

Receiving real-time traffic information (TMC)

Viewing the traffic list 51 Checking the traffic incidents on the

map 51

When traffic incidents occur on your

route 52

Turning the traffic information on or off 52

Checking useful information about your trip

Checking useful information 53 Recording your travel history 54

– Activating trip logger temporarily 54 – Browsing the trip log 54 – Setting the trip logger 55 – Editing a trip log 55

Using the Trip Computer mode 55 Calculating the fuel consumption 56

– Setting the initial odometer value 56 – Entering the fuel consumption

information 56

Engb

Page 4

Contents

– Setting the car maintenance

schedule 57

Customising preferences of the navigation Customising the navigation settings 58

– Restoring the default settings 59

Information on each option of “Settings” 59

–“Route Preferences” settings 59 –“Sound” settings 61 –“Warnings” settings 62 –“Navigation Map” settings 62 –“Regional” settings 64 –“Display” settings 65 –“Traffic” settings 65 –“Weather” settings 65 –“Fuel” settings 65 –“Trip Monitor ” settings 65 –“Online Services” settings 66 –“Usage Reports” settings 66

Setting the alert point warnings 66 Expanding the use of the navigation

functions 67

– Be sure to read before you use

AVICSYNC function 67

– What is the AVICSYNC App? 68

Compatibility and connectivity 68

– AVICSYNC compatibility 68 – Preparations before using the

AVICSYNC function 69

Getting the map update 69

Registering and connecting a Bluetooth device

Preparing communication devices 70 Registering your Bluetooth devices 70

– Searching for nearby Bluetooth

devices 70

– Pairing from your Bluetooth

devices 71

– Connecting to a Bluetooth device

automatically 72

– Deleting a registered device 72

Connecting a registered Bluetooth device

manually 73 Switching visibility 73 Entering the PIN code for Bluetooth wireless

connection 73 Displaying the Bluetooth address 74 Clearing the Bluetooth memory 74 Updating Bluetooth software 74 Displaying the Bluetooth software

version 75

Using hands-free phoning Displaying the phone menu 76

– Touch panel keys 76 – Reading the screen 76

Making a phone call 77

– Direct dialling 77 – Calling a number in the phone

book 77

– Dialling from the history 78 – Using the preset dial lists 79

Receiving a phone call 79

– Answering an incoming call 80 Minimising the dial confirmation screen 80 Changing the phone settings 81

– Answering a call automatically 81

– Switching the ring tone 81

– Inverting names in the phone book 81

– Setting the private mode 81

– Adjusting the other party’s listening

volume 82 Using the voice recognition function 82 Notes for hands-free phoning 82

iPod / iPhone or smartphone setup operation

The basic flow of iPod / iPhone or

smartphone setup 84 Setting the device connection method 84 iPod compatibility 84 Android™ device compatibility 85 AppRadio Mode Compatibility 85 MirrorLink device compatibility 85

Engb

Page 5

Contents

Information on the connections and

functions for each device 86

Using the radio

Using the touch panel keys 89 Reading the screen 89 Starting procedure 90 Selecting a band 90 Manual tuning 90 Seek tuning 90 Selecting a preset channel from the preset

channel list 91 Storing broadcast frequencies 91 Storing the strongest broadcast

frequencies 91 Tuning into strong frequencies 91 Receiving traffic announcements 92 Using news programme interruption 93 Tuning into alternative frequencies 94 Limiting stations to regional

programming 95 Switching Auto PI seek 95

– Activating the Auto PI seek for preset

stations 95

Switching the sound quality of the FM

tuner 96 Storing song information to an iPod (iTunes

Tagging) 97 Operating with the hardware buttons 97

Using the Digital Radio (DAB)

Using the touch panel keys 98 Reading the screen 99 Starting procedure 99 Selecting a band 99 Selecting a channel from the list 99 Listening to a recent broadcast 100 Manual tuning 100 Seek tuning 101 Selecting a preset channel from the preset

channel list 101 Storing broadcast frequencies 101

Switching to a channel with good receiving

sensitivity automatically 101

Switching to a similar channel with good

receiving sensitivity automatically 102 Receiving traffic announcements 103 Operating with the hardware buttons 103

Playing a disc

Using the touch panel keys (for audio) 104 Using the touch panel keys (for video) 104 Reading the screen (for audio) 106 Reading the screen (for video) 106 Starting procedure 107 Selecting files from the file name list 107 Playing tracks in random order 107 Setting a repeat play range 107 Switching the media file type 108 Searching for the part you want to play 108 Operating the DVD menu 108 Switching the subtitle language 109 Switching the audio language 109 Frame-by-frame playback 109 Slow motion playback 109 Returning to a specified scene 109 Resuming playback (Bookmark) 110 Operating the DVD menu using touch panel

keys 110 Switching the multi-angle DVD display 110 Selecting the audio output 110 Operating with the hardware buttons 111

Playing compressed audio files

Using the touch panel keys 112 Reading the screen 113 Starting procedure (for Disc) 114 Starting procedure (for USB/SD) 114 Switching the browse mode 114 Selecting files from the file name list 115 Selecting a file from the list related to the

song currently playing (link search) 115 Playing files in random order 115 Setting a repeat play range 116 Switching the media file type 116

Engb

Page 6

Contents

Operating with the hardware buttons 116

Playing compressed video files

Using the touch panel keys 117 Reading the screen 118 Starting procedure (for Disc) 118 Starting procedure (for USB/SD) 118 Selecting files from the file name list 118 Setting a repeat play range 119 Frame-by-frame playback 119 Slow motion playback 119 Switching the media file type 119 Operating with the hardware buttons 119

Playing compressed still image files

Using the touch panel keys 120 Reading the screen 120 Starting procedure 120 Selecting files from the file name list 121 Playing files in random order 121 Setting a repeat play range 121 Switching the media file type 121 Setting the slideshow interval 121 Operating with the hardware buttons 122

Using an iPod

Using the touch panel keys (for audio) 123 Using the touch panel keys (for video) 123 Reading the screen (for audio) 124 Reading the screen (for video) 124 Starting procedure 125 Setting the shuffle play 125 Setting a repeat play range 126 Selecting song or video sources from the

playlist screen 126

Using this product’s iPod function from your

iPod 127

Changing the speed of audiobook

playback 127

Displaying lists related to the song currently

playing (link search) 128

Operating with the hardware buttons 128

Playing back music from a music app other

than iPod music, as the iPod source 128

– Using the touch panel keys 128 – Reading the screen 129

Playing music output from the Android Auto-compatible device

Using the touch panel keys 130 Reading the screen 130 Starting procedure 131

Using your iPhone or smartphone applications Using AppRadio Mode 132

– Using the touch panel keys (App

control side bar) 132

– Starting procedure 133 – Using the keyboard 134 – Adjusting the image size (For

smartphone users) 135

– Displaying the image of your

application (iPhone with 30-pin connector) 136

– Displaying the image of your

application (iPhone with Lightning connector) 136

– Displaying the image of your

application (smartphone) 136

Using Android Auto 137

– Starting procedure 138 – Setting the driving position 138 – Adjusting the volume 138

Using MirrorLink mode 139

– Using the touch panel keys (App

control side bar) 139

– Starting procedure 139

Using the audio mix function 140

Using Aha Radio

Using the touch panel keys 141 Reading the screen 142 Starting procedure 142

Engb

Page 7

Contents

– For iPhone with a 30-pin connector

users 142

– For iPhone with a Lightning connector

users 143

– For smartphone users 143

Operating with the hardware buttons 144

Using a Bluetooth audio player

Using the touch panel keys 145 Reading the screen 146 Starting procedure 146 Selecting files from the file name list 147 Playing files in random order 147 Setting a repeat play range 147 Operating with the hardware buttons 147

Using an HDMI source

Using the touch panel keys 148 Reading the screen 148 Starting procedure 148

Using an AUX source

Using the touch panel keys 149 Reading the screen 149 Starting procedure 149 Setting the video signal 150 Switching the operation screen 150

Using AV input

Using the touch panel keys 151 Reading the screen 151 Starting procedure 151 Setting the video signal 152

Using MIXTRAX

Touch panel keys 153 Selecting an item to play songs 153 Selecting songs not to be played 153 Specifying the playback portion 154 Setting the flash pattern 154

System settings

Navigation info window 155

Setting automatic switching to the navigation

screen 155 Setting the FM tuning step 155 Setting the Digital Radio aerial power

supply 156 Activating the Bluetooth audio source 157 Setting the ever scroll 157 Setting AV input 157 Setting the rear view camera 158

– Setting rear view camera

activation 158

– Setting the polarity of the rear view

camera 159

– Setting the reversed image display for

the rear view image 159

Setting the camera for Camera View

mode 160 Displaying the parking assist

guidelines 160 Setting guidelines on the rear view

image 161 Setting the second camera input 162

– Setting the second camera

activation 162

– Setting the reversed image setting for

the second camera input image 163 Setting the safe mode 163 Turning off the demo screen 164 Selecting the system language 164 Reversing the climate control status

display 164

Setting the keyboard language with the

application for iPhone 165 Setting the beep sound 165 Adjusting the response positions of the

touch panel (touch panel calibration) 165 Setting the dimmer function 166 Setting whether to activate the dimmer

function 167 Setting the duration of time for the dimmer

function to be active 167 Adjusting the picture 168

Engb

Page 8

Contents

Displaying the firmware version 169 Updating firmware 169 Checking sensor learning status and driving

status 170 Clearing the status 171 Checking the connections of leads 171

Audio adjustments

Using fader/balance adjustment 173 Using balance adjustment 173 Switching sound muting/attenuation 174 Adjusting source levels 174 Adjusting the filter 176

– Adjusting the front and rear speaker

output 176

– Using the subwoofer output 177 Selecting the listening position 177 Adjusting the speaker output levels

finely 178 Adjusting the time alignment 179 Using the automatic sound leveliser 180 Using the equaliser 181

– Recalling equaliser curves 181 – Customising the equaliser curves 181 – Using the auto-adjusted equaliser 182

Adjusting the equaliser curve automatically

(Auto EQ) 182

– Before operating the Auto EQ

function 182

– Performing Auto EQ 183

Theme menu Selecting the background display 185

– Changing to the background display

image stored on the external storage device (USB, SD) 185

Setting the illumination colour 186

– Selecting the colour from the preset

colours 186

– Creating a user-defined colour 187 Selecting the theme colour 187 Selecting the clock image 188

Changing the preinstalled splash

screen 188

– Changing to the splash screen stored

on the external storage device (USB, SD) 188

Replicating the settings 189

– Exporting “Theme” settings 189 – Importing “Theme” settings 190

Setting up the video player Setting the top-priority languages 191

– Setting the subtitle language 191 – Setting the audio language 191 – Setting the menu language 192

Setting the angle icon display 192 Setting the aspect ratio 193 Setting parental lock 193

– Setting the code number and

level 193

Displaying your DivX VOD registration

code 194

Displaying your DivX VOD deregistration

code 195 Automatic playback of DVDs 195 Setting the video signal for the rear view

camera 195 Setting the video output format 196 Language code chart for DVDs 197

Favourite menu

Creating a shortcut 198 Selecting a shortcut 198 Removing a shortcut 198

Displaying the operation status of vehicle equipment

Displaying obstacle detection

information 199 Displaying the operating status of the climate

control panel 199

Common operations Setting the time and date 201

Engb

Page 9

Contents

Storing song information to an iPod (iTunes

Tagging) 201 Setting the “Sound Retriever” function 202 Changing the wide screen mode 202

Other functions

Selecting the video for the rear display 204 Setting the anti-theft function 204

– Setting the password 204 – Entering the password 205 – Deleting the password 205 – Forgotten password 206

Restoring this product to the default

settings 206

– Restoring the default settings 206

Appendix

Troubleshooting 207 Error messages 209 Positioning technology 215

– Positioning by GPS 215 – Positioning by dead reckoning 215 – How do GPS and dead reckoning work

together? 215

Handling large errors 216

– When positioning by GPS is

impossible 216

– Conditions likely to cause noticeable

positioning errors 217

Route setting information 219

– Route search specifications 219

Handling and care of discs 219

– Built-in drive and care 220 – Ambient conditions for playing a

disc 220

Playable discs 220

– DVD-Video and CD 220 – AVCHD recorded discs 221 – Playing DualDisc 221 – Dolby Digital 221

Detailed information for playable media 221

– Compatibility 221 – Media compatibility chart 224

Bluetooth 228 SDHC 228 WMA/WMV 228 DivX 228 AAC 229 Google, Google Play, Android™, and Android

Auto 229 MirrorLink 229 MIXTRAX 229 Detailed information regarding connected

iPod devices 229

– iPod and iPhone 229 – Lightning 230 – App Store 230 – iOS 230 – iTunes 230

Using app-based connected content 230

– Aha Radio 230 HDMI 231 MHL 231 IVONA Text-to-Speech 231 Notice regarding video viewing 231 Notice regarding DVD-Video viewing 231 Notice regarding MP3 file usage 231 Notice regarding open source licences 231 Map coverage 231 Using the LCD screen correctly 232

– Handling the LCD screen 232

– Liquid crystal display (LCD)

screen 232

– Maintaining the LCD screen 232

– LED (light-emitting diode)

backlight 232

Display information 233

– Phone menu 233

– System menu 233

– Theme menu 234

– Audio menu 235

– Video Setup menu 235

– Bluetooth menu 236

Specifications 237

Engb

Page 10

Chapter

Introduction

Manual overview

Before using this product, be sure to read Important Information for the User (a separate

manual) which contains warnings, cautions, and other important information that you should note.

The screen examples shown in this manual are those for AVIC-F77DAB. The screens may vary according to the models.

How to use this manual

Finding the operation procedure for what you want to do

When you have decided what you want to do, you can find the page you need from the Con- tents.

Finding the operation procedure from a menu name

If you want to check the meaning of an item displayed on screen, you will find the necessary page from the Display information at the end of this manual.

Conventions used in this manual

Before moving on, take a few minutes to read the following information about the conventions used in this manual. Familiarity with these conventions will help you greatly as you learn how to use your new equipment. ! Buttons on this product are described in

ALL CAPITALS, BOLD lettering: e.g.) HOME button, MODE button.

! Menu items, screen titles, and functional

components are described in bold with double quotation marks “”: e.g.) “System” screen or “Audio” screen

! Touch panel keys that are available on the

screen are described in bold in brackets [ ]: e.g.)

[Disc], [AV Source Settings].

! Extra information, alternatives and other

notes are presented in the following format: e.g.) p If the home location has not been stored

yet, set the location first.

! Functions of other keys on the same screen

are indicated with # at the beginning of the description: e.g.)

# If you touch [OK], the entry is deleted.

! References are indicated like this:

e.g.) = For details of the operations, refer to

How to use the screens on page 18.

! Model icons shown in this manual indicate

that the description is intended for the models indicated by the icons. If the following icons are shown, the description is applied only to the models shown. e.g.)

F70DAB F970DAB F970BT

Terms used in this manual

“Front display” and “Rear display”

In this manual, the screen that is attached to the body of this product will be referred to as the “Front display”. Any additional screen that is commercially available and can be connected to this product will be referred to as the “Rear display”.

“Video image”

“Video image” in this manual indicates moving images of DVD-Videos, Video-CDs, ROMVideos, DivX connected to this product, such as generalpurpose AV equipment.

, iPod, and any equipment that is

Engb

Page 11

Introduction

Chapter

“External storage device (USB, SD)”

The SD memory card, SDHC memory card and USB memory device are collectively referred to as the “external storage device (USB, SD)”. If it indicates the USB memory only, it is referred to as the “USB storage device”.

“SD memory card”

The SD memory card and SDHC memory card are collectively referred to as the “SD memory card”.

“iPod”

In this manual, iPod and iPhone will be referred to as “iPod”.

Notes on internal memory

Before removing the vehicle battery

If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. p Some of the settings and recorded con-

tents will not be reset.

The microprocessor must be reset under the following conditions: ! Prior to using this product for the first time

after installation.

! If this product fails to operate properly. ! If there appears to be problems with the op-

eration of the system.

! If your vehicle position is shown on the

map with a significant positioning error.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or other pointed implement.

Settings and recorded contents are reset to the factory settings.

F77DAB F70DAB

F970DAB F970BT

F9770DAB

F9770BT

Introduction

Data subject to erasure

The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself). p Some of the settings and recorded con-

tents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded contents to the factory settings. p Do not perform this operation when a device

is connected to this product.

p Some of the settings and recorded contents

will not be reset.

1 RESET button

Engb

Page 12

Chapter

Basic operation

Checking part names and functions

This chapter gives information about the names of the parts and the main features using the buttons.

F77DAB F70DAB

1 3 456 7 8 92

F970DAB F970BT

9 2

3 4 5 6 7 d e

1 LCD screen

2 Remote control sensor

p The remote control CD-R33 (sold sepa-

rately) is available. For details concerning operations, see the remote control manual.

F9770DAB

F9770BT

3 VOL (+/–) button

Press to adjust the AV (Audio and Video) source volume.

4 MAP button

! Press to display the Map screen.

! Press and hold to display the rear view

5 HOME button

! Press to display the Top menu screen.

! Press and hold to activate the voice re-

6 MODE button

! Press to switch between the Application

! Press and hold to turn the display off

7 TRK button

Press to perform manual seek tuning, fast forward, reverse and track search controls.

8 h button

9 RESET button

= For details of the operations, refer to Re-

= For details of the operations, refer to

How to use the screens on page 18.

camera image.

p This function is available only when

“Back Camera Input” or “2nd Camera Input” is set to “On”.

= For details of the operations, refer to

How to use the screens on page 18.

cognition function.

= For details, refer to Using the voice re-

cognition function on page 82.

screen and the AV operation screen.

p If the display cannot switch from the

AV operation screen to the Application screen when the MODE button is pressed, the display will turn off.

= For details of the operations, refer to

How to use the screens on page 18.

when the Application screen is available.

= For details, refer to Turning off the dis-

play on page 17.

setting the microprocessor on page 11.

Engb

Page 13

Basic operation

Chapter

a Auto EQ microphone input jack

Use to connect a microphone for acoustical measurement (sold separately).

b Disc-loading slot

Insert a disc to play.

= For details, refer to Inserting and ejecting

a disc on page 15.

c SD card slot

= For details, refer to Inserting and ejecting

an SD memory card on page 15.

d Detachable faceplate

button

Press to remove the detachable faceplate from this product.

= For details, refer to Removing the detach-

able faceplate on page 13.

Protecting your product against theft

F970DAB F970BT

The detachable faceplate can be detached from this product to discourage theft, as described below.

F9770DAB

F9770BT

! When removing or attaching the detachable

faceplate, do so after turning off the ignition switch (ACC OFF).

Removing the detachable faceplate

p This product cannot be operated while the

detachable faceplate is removed from this product.

1 Press the

When you release your finger, the bottom of the detachable faceplate separates slightly from this product.

2 Gently grip the bottom of the detachable faceplate and slowly pull it outward.

button.

Basic operation

CAUTION

! Do not expose the detachable faceplate to ex-

cessive shock or disassemble it.

! Never grip the buttons tightly or use force

when removing or attaching the detachable faceplate.

! Keep the detachable faceplate out of reach of

small children to prevent them from placing it in their mouths.

! After removing the detachable faceplate, keep

it in a safe place so it is not scratched or damaged.

! Do not expose the detachable faceplate to di-

rect sunlight and high temperatures.

1 Detachable faceplate

Attaching the detachable faceplate

1 Slide the detachable faceplate all the way into this product.

Make sure the detachable faceplate is securely connected to the mounting hooks of this product.

Engb

Page 14

Chapter

Basic operation

2 Push the lower part of the detachable faceplate until you hear a click.

If you fail to successfully attach the detachable faceplate to this product, try again but be careful not to force it as the panel could be damaged.

Notes on using the LCD panel

F77DAB F70DAB

WARNING

! Keep hands and fingers clear of this product

when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.

! Do not use with the LCD panel left open. If the

LCD panel is left open, it may result in injury in the event of an accident.

CAUTION

! Do not open or close the LCD panel by force.

This may cause a malfunction.

! Do not operate this product until the LCD

panel has completely opened or closed. If this product is operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety.

! Do not place a glass or can on the open LCD

panel. Doing so may break this product.

Adjusting the LCD panel angle

F77DAB F70DAB

1 Press the h button.

The following screen appears.

2 Touch the following keys to adjust the angle of the LCD panel.

Laying the panel down.

Returning the panel to the upright position.

3 Touch the following key.

Returns to the previous screen.

p The adjusted angle of the LCD panel will be

memorised and the LCD panel will automa-

tically return to that angle the next time the

LCD panel is opened or closed.

Inserting/ejecting/ connecting media

CAUTION

! Do not insert anything other than a disc into

the disc-loading slot.

! Do not insert anything other than SD memory

cards into the SD card slot.

! Ejecting an SD memory card during data

transfer can damage the SD memory card. Be sure to eject the SD memory card by the procedure described in this manual.

! Do not press the h button when an SD mem-

ory card is not fully inserted. Doing so may damage the card.

! Do not press the h button before an SD mem-

ory card has been completely removed. Doing so may damage the card.

Engb

Page 15

Basic operation

Chapter

Inserting and ejecting a disc

Inserting a disc

F77DAB F70DAB

1 Press the h button.

The following screen appears.

2 Touch the following key.

Opens the LCD panel.

3 Insert a disc into the disc-loading slot.

The disc is loaded, and the LCD panel closes.

Ejecting a disc

F77DAB F70DAB

1 Press the h button.

The following screen appears.

2 Touch the following key.

Inserting and ejecting an SD memory card

p This system is not compatible with the

Multi Media Card (MMC).

p Compatibility with all SD memory cards is

not guaranteed.

p This product may not achieve optimum per-

formance with some SD memory cards.

Inserting an SD memory card

F77DAB F70DAB

1 Press the h button.

The following screen appears.

2 Touch the following key.

Opens the LCD panel.

3 Insert an SD memory card into the SD card slot.

Insert it with the label surface face-up and press the card until it clicks and completely locks.

Basic operation

The LCD panel opens, and the disc is ejected.

Remove the disc, and press the h button.

The LCD panel closes.

Inserting a disc

F970DAB F970BT

F9770DAB

F9770BT

% Insert a disc into the disc-loading slot.

Ejecting a disc

F970DAB F970BT

F9770DAB

F9770BT

% Press the h button.

The disc is ejected.

4 Press the h button.

The LCD panel closes.

Engb

Page 16

Chapter

Basic operation

Ejecting an SD memory card

F77DAB F70DAB

1 Press the h button.

The following screen appears.

2 Touch the following key.

Opens the LCD panel.

3 Press the middle of the SD memory card gently until it clicks.

The SD memory card is ejected.

4 Pull the SD memory card out straight.

5 Press the h button.

The LCD panel closes.

Connecting and disconnecting an iPod

Connecting your iPod

= For details of the connections, refer to the

Installation Manual.

Disconnecting your iPod

% Pull out the cables after confirming that no data is being acces sed.

Plugging and unplugging a USB storage device

p This product may not achieve optimum per-

formance with some USB storage devices.

p Connection via a USB hub is not possible. p A USB cable is required for connection.

Plugging in a USB storage device

% Plug a USB storage device into the USB cable.

1 USB cable 2 USB storage device

Unplugging a USB storage device

% Pull out the USB storage device after checking that no data is being accessed.

Startup and termination

1 Start the engine to boot up the system.

After a short pause, the splash screen comes on for a few seconds.

2 Turn off the vehicle engine to terminate the system.

This product is also turned off.

On first-time startup

When you use this product for the first time, select the language that you want to use.

1 Start the engine to boot up the system.

After a short pause, the splash screen comes on for a few seconds. The “Select Program Language” screen appears.

2 Touch the language that you want to use on screen.

Engb

Page 17

Basic operation

Chapter

3 Touch the following key.

Displays the “Smartphone Setup” screen.

4 Touch the item you want to set.

= For details, refer to Information on the con-

nections and functions for each device on

page 86.

5 Touch the following key.

F77DAB F70DAB

F970DAB

F9770DAB

Displays the “DAB ANTENNA POWER SETTING” screen.

Proceeds to the next step.

F970BT

F9770BT

Displays the Top menu screen.

6 Touch the setting item according to the DAB aerial to be used.

! Yes (default):

Supplies power to a Digital Radio aerial. Select when using the optional Digital Radio aerial (AN-DAB1 or CA-AN-DAB.001) (sold separately) with this product.

! No:

Does not supply power. Select when using a passive aerial with no booster.

p Enter the password for the anti-theft func-

tion if the password entry screen appears.

p The terms appear if the screen displayed

last was the navigation screen. Read the terms carefully, checking the details, and then touch [OK] if you agree to the conditions. After you touch [OK], the screen that was displayed just before turning off the ignition switch (ACC OFF) is displayed.

A message about the map database

After you start using this product, a message related to map data may be displayed. p This message is displayed the first time you

turn on this product each month.

Turning off the display

You can turn off the display at night or when the screen is too bright.

When the Application screen is available

% Press and hold the MODE button.

The display turns off.

p If you touch the screen when the display is

off, it reverts to the original screen.

Basic operation

7 Touch [OK].

The Top menu screen appears.

# If you touch , the display returns to the pre- vious screen.

Regular startup

% Start the engine to boot up the system.

After a short pause, the splash screen comes on for a few seconds.

p The screen shown will differ depending on

the previous conditions.

When the Application screen is not available

% Press the MODE button.

The display turns off.

p If you touch the screen when the display is

off, it reverts to the original screen.

Engb

Page 18

Chapter

Basic operation

How to use the screens

Switching screens using the touch panel keys

Engb

Page 19

Basic operation

Switching screens using the hardware buttons

Chapter

1 Top menu screen

This is the starting menu to access the desired screens and operate the various functions. p If you press the HOME button, the Top

menu screen is displayed.

p “APPS” is displayed when AppRadio

Mode or MirrorLink mode is on.

p “Android Auto” is displayed when

Android Auto is on (for AVIC-F77DAB

and AVIC-F70DAB).

2 Time and date setting screen

You can set the time and date settings.

3 Setting menu screen

You can customise the system and audio settings, etc.

4 Phone menu screen

You can access the screen that is related to hands-free phoning.

6 Favourite source icons

You can display the icons of frequently used sources by dragging the icons to the display area. = For details of the operation, refer to

Changing the display order of source icons on page 21.

7 AV operation screen

You can operate each source.

8 Navigation menu screen

You can specify way points and a destination.

9 Map screen

! You can use this screen to check the cur-

rent vehicle position information and route to the destination.

! You can customise navigation settings. p If you press the MAP button, the Map

screen is displayed.

Basic operation

5 AV source selection screen

You can select the AV source.

a Application operation screen

You can control the iPhone or smartphone applications directly on this product. p If applications are not available, the Ap-

plication operation screen will not be displayed.

Engb

Page 20

Chapter

Basic operation

b Application menu screen

This product can switch to the application menu, on which you can display and operate the application for an iPhone or a smartphone on the screen. p If application menus are not available,

the Application menu screen will not be displayed.

Supported AV source

You can play or use the following sources with this product.

! Digital Radio (DAB) (*1) ! Radio (FM, MW/LW) ! CD ! ROM (compressed audio or video files) ! DVD-Video ! Video-CD

The following sources can be played back or used by connecting an auxiliary device.

! USB ! SD (*2) ! iPod ! Aha Radio ! Bluetooth audio ! AV input (AV) ! AUX ! HDMI (*3)

p (*1) Available for AVIC-F77DAB, AVIC-

F70DAB, AVIC-F970DAB, and AVICF9770DAB

p (*2) Available for AVIC-F77DAB and AVIC-

F70DAB.

p (*3) Available for AVIC-F77DAB.

Displaying the AV operation screen

1 Press the HOME button to display the Top menu screen.

2 Touch the AV operation key.

1 AV operation key

The AV operation screen appears.

132

5 6

1 Displays the source list.

= For details, refer to Selecting a front

source on the source list on page 21.

2 Displays the Time and date setting

screen.

= For details, refer to Setting the time and

date on page 201.

3 Displays the Setting menu screen. 4 Recalls equaliser curves.

= For details, refer to Using the equaliser

on page 181.

5 Displays the Phone menu screen.

= For details, refer to Displaying the phone

menu on page 76.

6 Shows the navigation information.

The distance to the next guidance point, the

name of the street on which the next gui-

dance point is located, the name of the

street that the vehicle is currently travelling

on, the estimated time of arrival, and warn-

ing icons, etc. are displayed.

p This is not displayed for some sources.

p This is not displayed when “Navigation

info window” is set to “Off”.

Engb

Page 21

Basic operation

Chapter

= For details, refer to Navigation info win-

dow on page 155.

Selecting a front source on the AV source selection screen

1 Press the HOME button to display the Top menu screen.

2 Touch the following key.

Displays the AV source selection screen.

3 Touch the source icon you want to select.

The AV operation screen of the selected source appears.

Selecting a front source on the source list

p This function is not available during a call

via this product.

1 Press the HOME button to display the Top menu screen.

2 Touch the AV operation key.

4 Touch the source key you want to select.

The AV operation screen of the selected source appears.

p “Camera View” is available only when

“Back Camera Input” or “2nd Camera Input” is set to “On”.

Selecting a rear source

You can select a source output to the rear display.

= For details of the operations, refer to Select-

ing the video for the rear display on page

204.

Turning off the AV source

Turn off the AV source to stop playing or receiving the AV source.

1 Press the HOME button to display the Top menu screen.

2 Touch the following key.

Displays the AV source selection screen.

3 Touch [OFF].

The AV source is turned off.

Basic operation

1 AV operation key

The AV operation screen appears.

3 Touch the following key.

Displays the source list.

Changing the display order of source icons

You can change the display order of source icons on the AV source selection screen. p This setting is available only when you stop

your vehicle in a safe place and apply the handbrake.

p This function is not available during a call

via this product.

1 Press the HOME button to display the Top menu screen.

Engb

Page 22

Chapter

Basic operation

2 Touch the following key.

Displays the AV source selection screen.

3 Touch and hold a source icon, and drag the icon to the desired position.

p If the source icon is moved, the order of the

source list is also changed.

Changing the display order of source keys

You can change the display order of source keys on the source list. p This setting is available only when you stop

your vehicle in a safe place and apply the handbrake.

p This function is not available during a call

via this product.

1 Press the HOME button to display the Top menu screen.

2 Touch the AV operation key.

4 Touch the following key.

The source keys can be moved.

5 Drag the source key to the desired position.

6 Touch the following key.

Returns to the previous screen.

p If the source key is moved, the source icons

displayed on the Top menu screen and the

AV source screen are also moved.

Using the touch panel

You can operate this product by touching the marks and items (touch panel keys) displayed on the screen directly with your fingers. p To protect the LCD screen from damage, be

sure to touch the touch panel keys only with your finger and do so gently.

1 AV operation key

The AV operation screen appears.

3 Touch the following key.

Displays the source list.

Engb

Using the common touch panel keys

1 2

1 Returns to the previous screen. 2 Closes the screen.

Page 23

Basic operation

Chapter

Operating list screens

1 Touching an item on the list selects the item

or narrows down the options.

2 Appears when all characters are not displayed

on the display area. If you touch the key, the rest of the characters are scrolled for display.

3 Appears when items cannot be displayed on a

single page only. Drag the slider bar to view any hidden items. Also, you can drag the list to view any hidden items.

Operating the time bar

p This function is not available when

using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation).

p This function is not available for some

media or sources.

Operating the on-screen keyboard

8 7

1 Displays the characters that are entered. If

there is no text in the box, an informative guide with text appears.

2 Moves the cursor to the right or left for a num-

ber of characters equivalent to the number of touches.

3 Enters the characters in the text box. 4 Deletes the input text to the left of the cursor

one letter at a time. Continuing to touch the key deletes all of the text.

5 Confirms the entry and proceeds to the next

step.

6 Enters a space.

A space equivalent to the number of touches is inserted.

7 Switches between alphabet and numbers/

symbols.

8 Switches between capital and lower case

letters.

4 5

Basic operation

1 You can change the playback point by drag-

ging the key.

p Playback time corresponding to the po-

sition of the key is displayed while dragging the key.

Engb

Page 24

Chapter

Basic operation

On first-time startup of the navigation system

When you use the navigation function for the first time, an initial setup process starts automatically. Follow the steps below. p You can change the language and GPS log

setting later using [Regional] and [Usage Reports] in the “Settings” screen. Other settings can be restarted later using [Start Configuration Wizard] in the “Settings” screen.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys.

Initiates the initial startup of the navigation system.

p The first time that the MAP button is

pressed, the navigation system also begins its initial startup.

After a short pause, the splash screen comes on for a few seconds. The “Language” screen appears.

3 Select the language that you want to use on the screen, then touch [Select].

The “EULA” screen appears.

4 Read the terms carefully, checking the details, and then touch [Accept] if you agree to the conditions. The “Usage Reports” screen appears.

5 Touch [Yes].

If you touch [Yes ], the software collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps.

p If you do not wish to activate information

collection, touch [No].

The configuration wizard starts.

6 Touch [Next]. The “Voice Language” screen appears.

7 Select the language that you want to use for voice guidance messages, then touch [Next].

8 If needed, modify the unit settings, then touch [Next]. The “Route Preferences” screen appears.

9 If needed, modify the default route planning options, then touch [Next].

10 Touch [Activate], then [Next].

A message saying that the connected online features are activated appears if you activate these services right away.

= For details, refer to “Online Services” set-

tings on page 66.

p You will need to install the AVICSYNC App

on your iPhone or smartphone first in order

to be able to use online services, which re-

quire a paid subscription. Service coverage

for each online service may vary depending

on the content provider providing the ser-

vice.

= For details, refer to Expanding the use of

the navigation functions on page 67.

11 Select the connected services you want to use, then touch [Next].

The initial setup is now complete. The Map screen appears and you can start using the navigation system.

Engb

Page 25

How to use the Navigation menu screen

Chapter

Operating the Navigation menu screen

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

The following screen appears.

Touch panel keys (Page 1)

21 63 4

789

Touch panel keys (Page 2)

cb d

You will see the following keys when you are navigating without a planned route.

1 Returns to the Map screen. 2 Searches for your destination by the ad-

dress or coordinates, or searches for the selected place of interest, etc. = For details, refer to Chapter 5.

3 Builds your route or edits the route cur-

rently set.

= For details, refer to Building a route

using “Route Planner” on page 42.

4 Displays the “Traffic Summary” screen.

= For details, refer to Checking the traffic

incidents on the map on page 51.

5 Displays useful information to support your

driving. = For details, refer to Chapter 9.

6 Displays notifications that contain impor-

tant information.

7 Displays the location that you saved as a fa-

vourite.

= For details, refer to Selecting a destina-

tion from stored locations on page 37.

8 Switches among 2D, 3D, and 2D North up

view modes.

9 Displays the “User Profile” screen where

you can create new profiles or edit the existing profiles. If multiple drivers are using this product, they can create their own profiles with their own settings. If you select a new profile, this product restarts so that the new settings can take effect.

a Displays the next page of the navigation

menu.

b Displays the previous page of the naviga-

tion menu.

c Configures the navigation-related settings

and enables you to access the “SyncTool” screen. = For details, refer to Chapter 10.

d Displays the information of your navigation

system (the version information, or licences, for example).

on the upper right corner of the screen

is used for AVICSYNC App connection.

= Be sure read Expanding the use of the

navigation functions (page 67) before

using the AVICSYNC function.

p When you are navigating a planned route,

the following route-related keys are available.

How to use the Navigation menu screen

Engb

Page 26

Chapter

How to use the Navigation menu screen

Adds a waypoint.

Displays route alternatives, parts of the route to avoid, or specific roads in your planned route to avoid.

Displays the route in its full length on the map, and displays route parameters and route alternatives.

Deletes your route or removes a waypoint.

Suspends and resumes the route guidance.

Engb

Page 27

How to use the map

Chapter

Most of the information provided by your navigation system can be seen on the map. You need to become familiar with how information appears on the map.

How to read the Map screen

2 3

4 5 6

p The following information marked with an

asterisk (*) appears only when a route is set.

p Depending on the conditions and settings,

some items may not be displayed.

p AV information is displayed at the bottom

of the Map screen.

p You can select whether you want to see the

speed limit sign on the map all the time. If you exceed the speed limit, the sign colour will change. = For details, refer to “Warnings” settings

on page 62.

1 Shows the number and name of the street to

be used (or next guidance point).*

2 Shows the next guidance point (manoeuvre).*

Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed. A smaller icon shows the type of the second next manoeuvre if it is near the next manoeuvre.

= For details, refer to Frequently shown

route events on page 30.

3 Shows the distance to the next guidance point

(manoeuvre).*

4 Shows the second manoeuvre arrow.* 5 Indicates the current location of your vehicle.

The apex of the triangular mark indicates your

orientation and the display moves automatically as you drive.

6 Displays the data field.

Touching this field displays the “Trip Compu- ter” screen. Touch and hold down this key and then select the values that you wish to have displayed to customise the data fields in the corner of the Map screen.

= For details, refer to Data Fields on page

63.

7 Shows the name of the street (or city) that

your vehicle is travelling on (or in).

8 Indicates the current route.*

The route currently set is highlighted in colour on the map.

9 Displays the Navigation menu screen.

ndicates the progress to the final destination.*

a I

AV information bar

AV information is displayed at the bottom of the Map screen.

12 34

1 Displays the source list.

= For details, refer to Selecting a front

source on the source list on page 21.

2 Shows the current status of AV source briefly. 3 You can turn on or off the communication be-

tween the AVICSYNC App and the navigation system by touching the key.

4 Displays the Phone menu screen.

= For details, refer to Displaying the phone

menu on page 76.

How to use the map

Engb

Page 28

Chapter

How to use the map

Operating the Map screen

Changing the scale of the map

p There is a limit to map scaling in 3D map

view mode. If the map scale is zoomed out further, the map is zoomed out in 2D map.

= For details, refer to Switching between

2D, 3D, and 2D North up views on page

28.

1 Press the MAP button.

The Map screen appears.

2 Pinch or expand the map to zoom out or in.

Touch anywhere on the map during navigation.

3 Touch the following key.

The map returns to the current position.

p If you press the MAP button, the map re-

turns to the current position.

p For information on the controls when the

scrolled map is displayed, refer to Control keys on the scrolled map on page 29.

Smart Zoom

Your navigation system features “Smart Zoom” that works in two ways: ! When the route is set:

When approaching a turn, “Smart Zoom” will zoom in and raise the view angle to enable you to easily recognise your manoeuvre at the next junction. If the next turn is at a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you.

! When the route is not set:

“Smart Zoom” will zoom in if you drive slowly and zoom out when you drive at high speed.

Switching between 2D, 3D, and 2D North up views

You can switch how the map is displayed. For 2D map view mode, you can select between “Heading up” and “North up”. ! Heading up:

The map display always shows the vehicle’s direction as proceeding toward the top of the screen.

! North up:

The map display always has north at the top of the screen.

p The map orientation is fixed at “Heading

up” when the 3D map screen is displayed.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch the following key.

Each time you touch the key the setting changes.

Indicates 2D Heading up view mode is currently selected.

Indicates 3D Heading up view mode is currently selected.

Indicates 2D North up view mode is currently selected.

4 Touch the following key.

Returns to the Map screen.

p If you press the MAP button, you can return

to the Map screen.

Engb

Page 29

How to use the map

Chapter

p For information on the controls when the

scrolled map is displayed, refer to Control keys on the scrolled map on page 29.

Scrolling the map to the position you want to see

1 Press the MAP button.

The Map screen appears.

2 Touch and drag the map in the desired direction to scroll.

If you place the cursor on the desired location, a brief overview about the location will appear at the top of the screen, showing the street name and other information for the location.

3 Touch the following key.

The map returns to the current position.

p If you press the MAP button, the map re-

turns to the current position.

Control keys on the scrolled map

3 Touch the following key.

Zooms in.

Zooms out.

Changes the map view mode (the map mode currently selected is shown).

Tilts up.

Tilts down.

Rotates left.

Rotates right.

Cancels map rotation.

How to use the map

1 Press the MAP button.

The Map screen appears.

2 Touch anywhere on the map.

The cursor and control keys appear.

p You can change the vertical view angle of

the map in 3D mode only.

= For details, refer to Switching between

2D, 3D, and 2D North up views on page

28.

4 Touch the following key.

The map returns to the current position.

p If you press the MAP button, the map re-

turns to the current position.

Engb

Page 30

Chapter

How to use the map

Understanding the route guidance

Once the route guidance begins, the system provides various guides by voice, text indications and signs.

Frequently shown route events

Icon Meaning

Turn left.

Turn right.

Turn back.

Bear right.

Turn sharp left.

Keep left.

Icon Meaning

Board ferry.

Leave ferry.

Approaching a waypoint.

Approaching the destination.

When navigating on multilane roads, you will need to make sure to take the proper lane for the recommended route. If there is lane information available in the map data, the navigation system will display the lanes and corresponding directions of travel at the bottom of the map using small arrows. Highlighted arrows represent the lane and direction that you need to take for the recommended route.

Lane information

Engb

Continue straight though the intersection.

Go left on the roundabout, 3rd exit (next manoeuvre).

Enter roundabout (manoeuvre after the next manoeuvre).

Enter motorway.

Exit motorway.

Signs are displayed at the top of the map. Sign colours and design styles are similar to those of the actual signs in place above or along the indicated roads. These signs display select destinations and the road number of the road that the relevant lane leads to.

Page 31

How to use the map

Chapter

If you are approaching a complex intersection and the necessary information exists, the map is replaced with a 3D view of the junction.

Signposts

Junction view

p If the data for these items is not contained

in the map data, the information is not available even if there are signs on the actual road.

When you set “Offer Motorway Services” to “on”, the on motorways. Touch the icon to open the details of the next few exits or service stations. In addition, touch an item to show its location on the map. You can set it as a waypoint easily. p If you want to display other types of POIs

for the exits, you can change the icons in “Services Displayed”.

= For details, refer to “Navigation Map” set-

tings on page 62.

icon appears while you are driving

Browsing the data field

The data fields are different when you are navigating a route and when you have no specified destination. For example, the data field provides the following information. ! When the route is set:

Distance to final destination, time needed to reach the final destination and estimated arrival time are shown.

How to use the map

! When the route is not set:

Direction or altitude is shown.

p Touching and holding the field allows you

to display the setting screen for the field.

p The estimated time of arrival is an ideal

value calculated based on the speed limit value set in “Max. Speed” of vehicle type setting and the actual driving speed. The estimated time of arrival is only a reference value, and does not guarantee arrival at that time.

= For details, refer to “Route Preferences”

settings on page 59.

When the system cannot receive a GPS signal

A triangular mark shows the current position of your vehicle.

Engb

Page 32

Chapter

How to use the map

When a GPS position is available, the triangular mark is displayed in full colour.

When there is no GPS position, the triangular mark is transparent. It shows your last known position.

Engb

Page 33

Searching for a destination

Chapter

CAUTION

For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the handbrake.

p Some information regarding traffic regula-

tions depends on the time when the route calculation is performed. Thus, the information may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question. Also, the information on the traffic regulations provided applies for a passenger vehicle, and not for a truck or other delivery vehicles. Always follow the actual traffic regulations when driving.

p [Destination from Phone] and [Online

Search] on the “New Route to...” screen

can be used when the AVICSYNC App connection is established.

= Be sure read Expanding the use of the

navigation functions (page 67) before

using the AVICSYNC function.

Searching for a location by address

The most frequently used function is “Ad- dress”, in which the address is specified and

the location is searched. p Depending on the search results, some

steps may be skipped.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [Address]. The “Find Address” screen appears.

Searching for a destination

5 Touch the following text box and set the destination you are looking for.

! Country:

By default, your navigation system proposes the country where you are. If you want to change the area to search set another country.

! Town or Postcode:

By default, your navigation system proposes the city/town where you are. You can select the city/town using its postal code instead of its name.

! Street:

If the street name is not available, touch [Go to Town] and select the city/town. This way the centre of the selected city/town becomes the destination of the route.

! Select House Number or Intersection:

This item will be displayed after you have set a street. If the house number is not available, touch [Go to Street] and select the street. This way the centre of the selected street becomes the destination of the route.

After you touch the selected address to finish the address search, the searched location appears on the Map screen.

6 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

Engb

Page 34

Chapter

Searching for a destination

After touching [Select as Destination], the “Route Summary” screen appears and countdown begins. When the countdown ends, the guidance automatically starts. If the screen is touched anywhere during the countdown, the countdown stops and the screen will stay as it is.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

7 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Searching for Points of Interest (POI)

Information about various facilities (Points Of Interest – POI), such as petrol stations, car parks or restaurants, is available. You can search for a POI by selecting the category (or entering the POI Name).

Searching for POIs using preset categories

The preset search allows you to quickly find the most frequently selected types of POIs.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [Places].

The “Places” screen appears.

The preset search categories are as follows.

! Petrol Station ! Accommodation ! Restaurant ! Parking

p When a route is not set, POIs are searched

for around the current position. p When the current position is not available

either (no GPS signal), POIs are searched

for around the last known position.

p When a route is set, “Petrol Station” and

“Restaurant” are searched for along the

route, and “ Accommodation” and “Park-

ing” are searched for around the destina-

tion.

5 Touch the category you want.

The results appear in a list.

6 Touch the POI you want.

The searched location appears on the Map screen.

# If you touch , you can sort the results or show the locations of all facilities on the map.

7 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

Engb

Page 35

Searching for a destination

Chapter

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

8 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Searching for POIs by categories or directly from the name of the facilities

You can search for POIs by their categories and subcategories. You can also search for POIs by their names in each of their categories.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [Places]. The “Places” screen appears.

5 Touch [Search Among All Places].

The “Search by Category” screen appears.

6 Touch [Around Here] and then select the area in which the POIs should be searched for.

! Category View:

You can select whether or not POI categories are displayed.

! Around Here:

Searches around the current position. Or, around the last known position if the current position is not available. (The results will be listed in order of the distance from this position.)

! In a Town:

Searches for a place within a selected city/ town. (The results will be listed in order of the distance from the centre of the selected city/town.)

! Around Destination:

Searches for a place around the destination of the current route. (The results will be listed in order of the distance from the destination.) p This key is active only when the route is

set.

! Along Route:

Searches along the current route, and not around a point already set. This is useful when searching for a stopover that results in a minimal detour, such as searching for petrol stations or restaurants. (The results will be listed in order of the length of the necessary detour.) p This key is active only when the route is

set.

7 Select one of the categories, subcategories or brands to narrow down the places.

The screen appears showing all places in the selected main category around the selected location or along the route.

# Touch [Search by Name] and enter the name of the place using the keyboard.

8 Touch the POI you want.

The searched location appears on the Map screen.

Searching for a destination

Engb

Page 36

Chapter

Searching for a destination

# If you touch , you can change the sort method of the results.

9 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

10 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Searching for providers nearby that offer emergency or roadside assistance services

IMPORTANT

Never use this product to route to hospitals, police stations or similar facilities in an emergency. Stop using any functions relating to the hands-free phoning and please call the appropriate emergency number.

You can search for locations that provide emergency or roadside assistance in the surrounding areas. p This information does not necessarily cor-

respond to actual information. Utilise the information for your reference.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch [Help Nearby].

The “Help Nearby” screen appears. The preset search categories are as follows.

! Car Repair ! Health ! Police ! Petrol Station

5 Touch the category you want.

The results appear in a list.

6 Touch the POI you want.

The searched location appears on the Map screen.

# If you touch , you can change the sort method of the results.

7 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

Engb

Page 37

Searching for a destination

Chapter

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

8 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Selecting a destination from stored locations

Storing locations you visit frequently saves time and effort. Selecting an item from the list provides an easy way to specify the position. The list of saved locations contains two preset categories: Home and Work. p This function is available if locations have

been registered in “Saved Location”. = For details, refer to Storing a location in

“Saved Location” on page 47.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

6 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

7 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Selecting a destination from stored routes

Storing routes you use frequently saves time and effort. p This function is not available if no routes

have been registered in “Saved Routes”. = For details, refer to Storing a route in

“Saved Routes” on page 48.

Searching for a destination

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [Saved Location]. The “Saved Location” screen appears.

# If you touch and then [Edit], you can edit the details of saved locations.

5 Touch the entry you want.

The searched location appears on the Map screen.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch

to show the next page.

Engb

Page 38

Chapter

Searching for a destination

5 Touch [Saved Routes]. The “Saved Routes” screen appears.

6 Touch the entry you want. The “Route Planner” screen appears.

p You can add waypoints or change the final

destination on the “Route Planner” screen.

= For details, refer to Building a route

using “Route Planner” on page 42.

7 Touch [Show Route]. After touching [Show Route], the “Route Summary” screen appears and countdown

begins. When the countdown ends, the guidance automatically starts. If the screen is touched anywhere during the countdown, the countdown stops and the screen will stay as it is.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

8 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Selecting a location you searched for recently

The places that were previously set as destinations or waypoints have been automatically stored in “History”.

History

1 Press the MAP button.

The Map screen appears.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [History].

The list of recent destinations appears.

5 Touch the entry you want.

The searched location appears on the Map screen.

6 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

7 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Smart History

Smart History suggests these previously used locations as destinations based on your navigation habits, using parameters like the current time of day, the day of week, and the current location.

2 Touch the following key.

Displays the navigation menu on the Map screen.

Engb

Page 39

Searching for a destination

Chapter

Smart History items are shown in the “New Route to...” screen for easy access.

Searching for a location using “Combined Search”

The “Combined Search” feature lets you quickly find a place by its name and search area. p The “Combined Search” function also

searches your stored data.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

6 Enter the name, address, or category of the destination you are looking for, then touch the following key.

Displays the “Search Results” screen.

7 Touch the entry you want.

The searched location appears on the Map screen.

8 Touch the right of the list to narrow down the search results.

1 Shows the conditions that are currently se-

lected.

2 Touch this key to show the other conditions.

# If you touch a map data provider logo, you can narrow down the list of results by showing the results from the provider.

Searching for a destination

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch [Combined Search].

The “Combined Search” screen appears.

5 Touch the right text box to enter the country and city/town you want search.

9 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

Engb

Page 40

Chapter

Searching for a destination

10 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Searching for a location by the coordinates

Entering a latitude and longitude pinpoints the location.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch

5 Touch [Coordinates]. The “Coordinates” screen appears.

6 Enter the latitude value and touch [OK].

p When a value is already entered in the text

p You can change the display format of the la-

# When entering the coordinates in UTM format, touch

7 Enter the longitude value and touch [Go!].

p When a value is already entered in the text

to show the next page.

field, touch first.

titude and longitude to any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.

field, touch first.

or to delete the value

, then [UTM Coordinates].

or to delete the value

The searched location appears on the Map screen.

8 Touch [Select as Destination] on the “Map Location” screen.

= For details on the operations in the “Map

Location” screen, refer to Using the “Map

Location” screen on page 41.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

9 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Searching for a location by scrolling the map

Specifying a location after scrolling the map enables you to set the position as a destination or waypoint.

1 Press the MAP button.

The Map screen appears.

2 Touch and drag the screen to scroll the map to the position you want.

3 Touch the location that you want to select as your destination.

The cursor appears.

Engb

Page 41

Searching for a destination

Chapter

4 Touch [Select as Destination]. After touching [Select as Destination], the

“Route Summary” screen appears and countdown begins. When the countdown ends, the guidance automatically starts. If the screen is touched anywhere during the countdown, the countdown stops and the screen will stay as it is.

= For details on the operations in the “Route

Summary” screen, refer to Checking route

information and preferences on page 44.

5 Touch [Start Navigation].

Your navigation system starts the route guidance.

= For details of the route guidance, refer to

Understanding the route guidance on page

30.

Using the “Map Location” screen

Once a location is searched, the “Map Loca- tion” screen appears. You can select some op-

tions for the route or displayed map location before route calculation.

13 42

3 Returns the cursor to the initial position and

the map scale to the initial scale.

4 Shows the route setting preferences for route

calculation. Touch the keys to activate or deactivate the preference.

Calculates the route prioritising the use of motorways when the key is activated.

Calculates the route prioritising the use of per-use charged toll roads when the key is activated.

Calculates the route prioritising the use of ferries when the key is activated.

Calculates the route prioritising the use of carpool and HOV lanes when the key is activated.

5 Returns to the previous screen. 6 Sets the cursor position to your destination (or

waypoint).

7 Displays the shortcuts.

! Detailed Information:

Shows the detailed information of the point.

! Save Location:

Saves the displayed location as your favourite location. The saved location can be easily recalled later.

! Places Around Cursor:

Searches for POIs around the displayed location. Touch the POI to show the “Map Location” screen, and also set the POI as the destination (or waypoint).

Searching for a destination

p If you touch the map, the cursor is placed

at that position. Also, you can scroll the map by dragging the map.

1 Zoom in/zoom out

p You can also pinch or expand the map

to zoom in or out.

2 Cancels the “Map Location” screen and dis-

plays the map of the current position.

Engb

Page 42

Chapter

Checking and modifying the current route

Modifying the route

When navigation is already started, there are several ways to modif y the current route. The following sections describe some of those options.

4 Inserts a new waypoint. 5 Touch 6 Waypoint 7 Returns to the previous screen. 8 Starting position (The current vehicle posi-

Building a route using “Route Planner”

The “Route Planner” (or “My Route” ) feature lets you build your route using the list of destinations. Editing the list allows you to plan your route easily. p Once you set the route, you can edit your

route using the menu displayed as “My

Route”.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Route Planner] or [My Route].

4 Touch one of the options.

15423

1 Destination 2 Cancels the “Route Planner” (or “My

Route”) screen and displays the map of the current position.

3 Adds a new destination and changes the

current destination to the last waypoint.

968 ab

9 Calculates the route and shows the “Route

a Displays the options for the location.

b Displays the shortcuts.

or to scroll the list.

tion is set as default and [Current GPS Po-

sition] is displayed.)

= For details, refer to Changing the starting

position on page 43.

Summary” screen.

! Move Up/Move Down:

Edits the order you want to visit the locations.

! Delete:

Deletes the destination or waypoint.

! Save Location:

Stores the location in “Saved Location”.

= For details, refer to Storing a location

in “Saved Location” on page 47.

! Change:

Changes the destination or waypoint to another location.

! Show on Map:

Shows the selected location on the map.

! Delete All:

Deletes all waypoints and the destination. Touch [Continue Without Route] to cancel the planned route.

! Optimise Waypoints:

Changes the order of waypoints automatically so that the route can be easily travelled. (If the resulting order is the same as the current order, this option is invalid.)

! Optimise Route:

Changes the order of all waypoints and the destination automatically so that the route can be easily travelled. (If the resulting order is the same as the current order, this option is invalid.)

Engb

Page 43

Checking and modifying the current route

Chapter

Changing the starting position

The starting position for route can be changed from the current position.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Route Planner] or [My Route].

4 Touch [Current GPS Position].

The pop-up menu appears.

5 Touch [Set Start Point] or [Change Start Point] and then touch [OK].

6 Search for a location.

7 Touch [Set Start Point] or [Change Start Point].

The selected position is set as the starting position for route calculation.

8 Touch [Show Route] or [Continue Without Route].

The system starts route recalculation after [Show Route] is touched, and then the “Route Summary” screen appears. Af ter [Start Navigation] is touched, your navigation system starts the route guidance. After [Continue Without Route] is touched, the current position map appears.

Adding waypoints

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Add Waypoint].

4 Search for a location.

5 Touch [Select as Waypoint]. The route is recalculated, and the “Route Summary” screen appears. (When the way-

point is already set, the “My Route” screen appears. Touch [Show Route] and proceed to the next step.)

6 Touch [Start Navigation].

Your navigation system starts the route guidance.

Checking route alternatives

You can select another route and compare different route alternatives.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

Checking and modifying the current route

Restoring the current position as the starting position

1 Touch [Route Planner] or [My Route].

2 Touch [Current GPS Position].

The pop-up menu appears.

3 Touch [Back to GPS position] and then touch [Delete Start Point].

The starting position for route calculation returns to the current position.

3 Touch [Detours & Alternatives].

4 Touch [Alternative Routes]. The “Alternative Routes” screen appears.

Engb

Page 44

Chapter

Checking and modifying the current route

5 Touch any of the conditions you want to display on the map.

You can see the approximate time required and total distance of selected route alternatives. Touch any of the route alternatives to see it on the map.

p If more than three route alternatives have

been found, [More Results] appears. Touch [More Results] to show the other routes. = For information about route calculation

conditions, refer to Route Planning

Method on page 60.

6 Touch [Select].

The selected route is applied as your current route.

Checking detour routes

You can check for detour routes that avoid the selected sections or streets, or that avoid the road ahead. You can also check for alternative routes.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Detours & Alternatives].

! Avoid Special Sections:

Shows the route avoiding certain sections.

Touch the list item to select the section you

want to avoid. The distance and time differ-

ence, suggested route, current route, and

the section avoided are shown. Touch [Ac-

cept] to apply the suggested route. ! Avoid Specific Road:

Shows the route avoiding certain road.

Touch the list item to select the road you

want to avoid. Distance and time difference,

suggested route, current route, section

avoided are shown. Touch [Accept] to apply

the suggested route. ! Avoid Road Ahead:

Shows the route avoiding the road ahead.

Touch [+]or[–] to set the distance you want

to avoid. Touch [Avoid] to apply the sug-

gested route. ! Restore Original Route:

Cancels the route with avoidances and re-

stores the previous route.

p The route set by [Alternative Routes]

cannot be cancelled.

Checking route information and preferences

Once you set the route, you can check a summary of the current route.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Route Summary]. The “Route Summary” screen appears.

4 Touch one of the options.

! Alternative Routes:

Shows the alternative routes.

= For details, refer to Checking route alter-

natives on page 43.

Engb

Page 45

Checking and modifying the current route

Chapter

4 Touch one of the options.

15423

768

p You can scroll the map by dragging the

map.

1 Shows the information for a transit point on

the route. Touching the items allows you to see the location on the map. Touch [Avoid] and [Accept] to set the location as a location to avoid.

2 Cancels the “Route Summary” screen and

displays the map of the current position.

3 Shows the conditions of the displayed

route.

4 The screen returns to the initial position

and the map scale returns to the initial scale.

5 Zoom in/zoom out

p You can also pinch or expand the map

to zoom in or out.

6 Shows alternative routes.

= For details, refer to Checking route alter-

natives on page 43.

7 Returns to the previous screen. 8 Shows the total length of the route and ap-

proximate required time for the route.

9 Displays the shortcuts.

! Route Preferences:

Shows the route setting preferences. If you change the preferences, the route is recalculated.

! Itinerary:

Shows all transit points in detail. Touch a transit point to show its position on the map. If you touch [Avoid] on the map screen, the route is recalculated

avoiding the transit point (as much as possible).

! Save Route:

Saves the displayed route. The saved route can be recalled later.

! Places Along Route:

Searches for POIs along the displayed route. Touch the POI to show the “Map Location” screen, and also set the POI as a waypoint.

! Simulation:

You can run a simulation of the navigation for the current route, as a demonstration.

= For details, refer to Checking route al-

ternatives on page 43.

Cancelling the current route guidance

If you no longer need to travel to your destination, follow the steps below to cancel the route guidance.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Cancel Route] or [Delete Waypoint].

The message screen appears.

4 Touch one of the options.

If there are no waypoints on the route, touch [Cancel Route] to cancel the route. If there are waypoints on the route, touch [Cancel Route] to cancel the route. Touch [Delete Waypoint] to delete only the nearest waypoint. In such case, the route is recalculated.

Checking and modifying the current route

Engb

Page 46

Chapter

Checking and modifying the current route

Watching the simulation of the route

You can run a simulation of the navigation for the current route, as a demonstration. Follow the steps below.

1 Set a route to your destination.

= For details, refer to Chapter 5.

2 Press the MAP button.

The Map screen appears.

3 Touch the following key.

Displays the navigation menu on the Map screen.

4 Touch [Route Summary]. The “Route Summary” screen appears.

5 Touch the following key.

Displays the shortcuts.

6 Touch [Simulation].

The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.

Jumps to the previous guidance point (manoeuvre).

Pauses the simulation.

Jumps to the next guidance point (manoeuvre).

Increases the speed of the simulation to four, eight or 16 times the normal speed. Touching the key again returns to the normal speed.

# Touch [Close] to stop the simulation.

p During simulation, you can use the follow-

ing control keys (they disappear after a few seconds but you can view them again by touching the map).

Engb

Page 47

Registering and editing locations and routes

Chapter

Storing a location in “Saved Location”

Storing your favourite locations in “Saved Lo- cation” allows you to save the time and effort

used on re-entering this information. “Saved Location” can include your home location, workplace, and places you have already registered.

Storing your home and your workplace location

You can store one home location and one workplace location. You can change the stored information later. Also, routes to stored locations can be calculated easily by touching the corresponding key.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch the following key.

Displays the “Saved Location” screen.

4 Touch [Home] or [Work] and then touch [OK].

p When you have already stored your home or

workplace, touch [Home]or[Work]to show the location on the “Map Location” screen.

5 Search for a location.

= For details, refer to Chapter 5.

Storing your favourite locations

You can store a frequently visited location (such as a relative’s home) to allow easy routing.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch the following key.

Displays the “Saved Location” screen.

4 Touch [Add Location].

5 Search for a location.

= For details, refer to Chapter 5.

6 Touch [Save Location].

7 Enter the name if needed and then touch the following key.

Saves the location as a new location under “ Saved Location”.

The cursor position has been stored.

p You can also store the location without

using the “Saved Location”screen. When the “Map Location” screen is displayed after searching for the location or after scrolling the map, open the shortcuts and then touch [Save Location].

p In the on-screen keyboard, touching

enables you to store the location as your

home or workplace location.

Registering and editing locations and routes

6 Touch [Save Location].

The cursor position has been stored.

Editing stored locations

Stored locations can be edited later.

Engb

Page 48

Chapter

Registering and editing locations and routes

Renaming stored locations

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch the following key.

Displays the “Saved Location” screen.

4 Touch the following key.

Displays the shortcuts.

5 Touch [Edit]. The “Select Location to Edit” screen appears.

6 Touch the item you want to rename and touch [Rename].

p “Home”and “Work” cannot be renamed.

The location can be set again.

7 Enter the name and then touch .

8 Touch [Done]. The “Saved Location” screen appears.

Deleting stored locations

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch the following key.

4 Touch the following key.

Displays the shortcuts.

5 Touch [Edit]. The “Select Location to Edit” screen appears.

6 Touch the item you want to delete and touch [Delete].

p “Home” and “Work” cannot be deleted.

The location can be set again. p If you touch

All], all entries (including the home and

workplace locations) can be deleted.

and then touch [Delete

A message will appear asking you to confirm the deletion.

7 Touch [OK].

8 Touch [Done]. The “Saved Location” screen appears.

p You can also delete the stored location with-

out using the “Saved Location” screen.

When the “Map Location” screen is dis-

played after scrolling the map, place the

cursor on a stored location which you want

to delete and open the shortcuts and then

touch [Remove Saved Location].

Storing a route in “Saved Routes”

Storing your favourite routes in “Saved Routes” allows you to save the time and effort

used on re-entering this information.

1 Set a route to your destination.

= For details, refer to Chapter 5.

2 Press the MAP button.

The Map screen appears.

3 Touch the following key.

Engb

Displays the “Saved Location” screen.

Displays the navigation menu on the Map screen.

Page 49

Registering and editing locations and routes

Chapter

4 Touch [Route Summary]. The “Route Summary” screen appears.

5 Touch the following key.

Displays the shortcuts.

6 Touch [Save Route]. The “Save Route” screen appears.

7 Enter the name if needed and then touch the following key.

Saves the route as a new route under “Saved Routes”.

Editing the stored route

Stored routes can be edited later.

Renaming stored routes

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

8 Touch the item you want to rename and touch [Rename].

9 Enter the name and then touch

10 Touch [Done].

Deleting stored routes

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch

5 Touch [Saved Routes]. The “Saved Routes” screen appears.

6 Touch the following key.

to show the next page.

Displays the shortcuts.

Registering and editing locations and routes

Displays the navigation menu on the Map screen.

3 Touch [New Route]. The “New Route to...” screen appears.

4 Touch

5 Touch [Saved Routes]. The “Saved Routes” screen appears.

6 Touch the following key.

7 Touch [Edit].

to show the next page.

Displays the shortcuts.

7 Touch [Edit].

8 Touch the item you want to delete and touch [Delete].

p If you touch and then touch [Delete

All], all entries can be deleted.

9 Touch [Delete].

10 Touch [Done].

Saving a location as an alert point

You can save any map location (such as a school zone or railroad crossing) as an alert point. p To use this function, activate the warnings

beforehand and set the alert types.

Engb

Page 50

Chapter

Registering and editing locations and routes

= For details, refer to “Warnings” settings on

page 62.

1 Press the MAP button.

The Map screen appears.

2 Scroll the map and select a location.

The cursor appears at the selected point.

3 Touch the following key.

Displays the shortcuts.

# To edit a previously saved alert point, touch

4 Touch [Add Alert Points]. The “Add New Alert Point” screen appears.

5 Set the necessary parameters.

! Alert Type:

Sets the type of the alert point.

! Speed Limit:

Sets the speed limit for this alert point (if applicable).

! Direction:

Sets the direction from which you expect the alert to come from.

6 Touch [Save].

The location is saved as a new alert point.

= For details, refer to “Warnings” settings on

page 62.

p The warning for road safety cameras (like

speed cameras) is disabled when you are in certain countries where warnings for road safety cameras are prohibited. However, you are fully responsible for ensuring that this feature is legal in the country where you intend to use it.

Editing the stored alert points

Stored alert points can be edited later.

1 Press the MAP button.

The Map screen appears.

2 Scroll the map to the stored alert point.

3 Touch the following key.

Displays the shortcuts.

4 Touch [Edit Alert Points].

5 Set the necessary parameters.

# If you touch and then touch [Delete], the selected alert point will be deleted.

6 Touch [Edit].

The alert settings are modified.

Engb

Page 51

Receiving real-time traffic information (TMC)

Chapter

The Traffic Message Channel (TMC) provides real-time traffic reports. If the navigation system is equipped with the TMC feature, you can check the traffic reports and information received. p The online function in “Traffic” can be used

if you connect an iPhone or a smartphone that has the AVICSYNC App installed.

= Be sure read Expanding the use of the

navigation functions (page 67) before

using the AVICSYNC function.

Viewing the traffic list

Traffic information is displayed onscreen in a list. This allows you to check how many traffic incidents have occurred, the locations, and the distance from your current position.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Traffic]. The “Traffic Summary” screen appears.

4 Touch [Traffic Events]. The “Traffic Events” screen appears.

p If a route is set, relevant events for your cur-

rent route are shown in the upper section of the list.

p Touching the desired item allows you to

check its position on the map. Touch

to show the previous or next event.

Checking the traffic incidents on the map

Traffic event information can be displayed on the map.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Traffic]. The “Traffic Summary” screen appears.

4 Touch [Traffic Map].

The “Current Traffic Map ” screen appears.

Receiving real-time traffic information (TMC)

A list with traffic information that has been received is shown. The list is sorted by distance from your current position. Places (street names) where incidents have occurred are displayed on the list.

Road segments affected by traffic incidents are displayed in an alternate colour on the map, and small symbols above the road show the nature of the incident. The traffic jam lines indicate the degree of the traffic jam by colour.

Engb

Page 52

Chapter

Receiving real-time traffic information (TMC)

When traffic incidents occur on your route

The notification icon shows the status of traffic information reception.

Indicates that there are no traffic incidents in your coverage area.

Indicates that information on traffic incidents are being received.

Indicates that there are no significant traffic incidents on your route.

Indicates that there are significant traffic incidents on your route. The icon shows the type of the next traffic incident.

1 Press the MAP button.

The Map screen appears.

2 Touch the relevant traffic event icon.

p If you turn the traffic information feature

off, [Traffic] on the navigation menu disap- pears.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch to show the next page.

4 Touch [Settings]. The “Settings” screen appears.

5 Touch

to show the next page.

6 Touch [Traffic]. The “Traffic Settings” screen appears.

7 Touch [Traffic] to turn the switch on or off.

The feature is enabled or disabled.

= For details, refer to “Traffic” settings on page

65.

1 Traffic notification icon

The “Traffic Summary” screen appears. You can check the details of the traffic incidents. Touch the relevant event to display the location on the map.

Turning the traffic information on or off

The traffic information feature is turned on by default. To enable or disable the TMC feature, perform the following procedure.

Engb

Page 53

Checking useful information about your trip

Chapter

Checking useful information

The “Useful Information” menu contains various information to support your driving.

p The online function in “Parking”, “Weath-

er” and “Fuel Prices” can be used if you

connect an iPhone or a smartphone that has the AVICSYNC App installed.

= Be sure read Expanding the use of the

navigation functions (page 67) before

using the AVICSYNC function.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch the desired menu item.

! Parking:

Checks for car parks near your current location. p For details, refer to the manual for

AVICSYNC on our website.

! Fuel Prices:

Displays recent fuel prices of petrol stations near the current location, along the current route, or in the town. p For details, refer to the manual for

AVICSYNC on our website.

! Weather:

Checks the weather forecast for your current location, along your route, around your

destination, as well as for your saved locations. p For details, refer to the manual for

AVICSYNC on our website.

! Where Am I?:

Displays a special screen with information about the current position and a key to search for nearby emergency or roadside assistance services. The screen provides the following information: — Latitude and longitude (coordinates of

the current position in WGS84 format)

— Address details of the current position

(when available)

— The nearest city — Next crossing road/street — Previous crossing road/street

p If the current street is displayed below

the current position marker on the map, touch it to open the “Where Am I?” screen. When you are driving without a planned route, touch the current street or the arrows at the top section of the Map screen to open the “Where Am I?” screen.

p To save the current position as a “Saved

Location” destination, touch

= For details, refer to Storing a location

in “Saved Location” on page 47.

p To check the country information of your

current position, touch

! Help Nearby:

Checks for POIs in your surroundings. The preset search categories are as follows.

! Car Repair: ! Health: ! Police: ! Petrol Station:

! Country Information:

Checks for useful driving information about the selected country (for example, speed limits and maximum blood alcohol level). p This information may not necessarily

correspond to the actual regulations, etc. Utilise the information for your reference.

Checking useful information about your trip

Engb

Page 54

Chapter

Checking useful information about your trip

! Trip Monitor:

Checks the statistical data of your trips (for example, start time, end time, average speed, etc.).

= For details, refer to Recording your travel

history on page 54.

! GPS Information:

Displays the GPS information screen with satellite position and signal strength information.

! Fuel Consumption:

You can estimate the fuel cost to your destination by entering the fuel consumption information in the navigation system.

= For details, refer to Calculating the fuel

consumption on page 56.

Recording your travel history

Activating the trip logger enables you to record your driving history (hereinafter called “trip log”). You can review your trip log later. p The trip logger is set so that it can be

started manually by default. You can change the settings of this function in order to save the log automatically.

= For details, refer to Trip Monitor: on page

58.

Activating trip logger temporarily

One-time activation is useful if you want to create a log only for a particular trip.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch [Trip Monitor].

The “Trip Monitor” screen appears. A list of trip logs already recorded appears. A blank list appears if you have not recorded any trip logs yet.

5 Touch [Start New Recording].

The trip logger is activated. The touch key changes to [Stop Recording]. Touching [Stop Recording] allows you to deactivate the trip logger.

p If there is not enough space in the built-in

memory, the oldest trip log will be overwrit-

ten by the new one. p If you want the system to always activate

the trip logger whenever the GPS signal is

available, turn on “Enable Auto-Saving”. = For details, refer to Enable Auto-Saving:

on page 55.

Browsing the trip log

1 Record the trip log.

2 Press the MAP button.

The Map screen appears.

3 Touch the following key.

Displays the navigation menu on the Map screen.

4 Touch [Useful Information]. The “Useful Information” screen appears.

5 Touch [Trip Monitor]. The “Trip Monitor” screen appears.

p To export all trip logs, touch [Export All].

6 Touch any of the items to see the details.

The screen showing the trip log in detail appears.

p To display the trip log on the map, touch

[Visible on Map] to tick the check box.

Engb

Page 55

Checking useful information about your trip

Chapter

Touching allows you to view the shortcuts and enables you to use the following functions.

! View on Map

Shows the trip log on the map screen.

! Export Track Log:

Exports the track log currently selected to an external storage device.

Setting the trip logger

1 Record the trip log.

2 Press the MAP button.

The Map screen appears.

3 Touch the following key.

Displays the navigation menu on the Map screen.

4 Touch [Useful Information]. The “Useful Information” screen appears.

5 Touch [Trip Monitor]. The “Trip Monitor” screen appears.

6 Touch Settings].

The setting screen appears.

7 Touch any of the items to change the settings.

! Enable Auto-Saving:

Sets whether automatic trip logging is activated or not.

! Save Track Log:

Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. You can activate the track logger whenever the trip logger is activated.

p “Trip Database Size” indicates the cur-

and then touch [Trip Monitor

rent data size of the trip log (track log included).

Editing a trip log

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch [Trip Monitor]. The “Trip Monitor” screen appears.

5 Touch

and then touch [Edit].

The “Select Trip to Edit” screen appears.

6 Touch any of the items to edit.

! Delete:

Deletes the trip log.

! Rename:

Renames the trip log.

! Change Colour:

Changes the colour by selecting another colour from the colour table.

p If you touch

All], all entries can be deleted.

and then touch [Delete

7 Touch [Done].

Using the Trip Computer mode

In the trip computer screen, the information received from the GPS receiver and your vehicle is displayed like a metre for a vehicle.

1 Press the MAP button.

The Map screen appears.

Checking useful information about your trip

Engb

Page 56

Chapter

Checking useful information about your trip

2 Touch the data field key.

The “Trip Computer” screen appears.

p If you touch [Trip Summary], the details of

the current trip are displayed. Touch [Save

Trip] to store the current trip log.

3 Touch the following key.

Returns to the Map screen.

p If you press the MAP button, you can return

to the Map screen.

Calculating the fuel consumption

The fuel consumption monitor helps you keep track of the fuel consumption of your car even if you do not use the navigation system for all your journeys. Set the initial odometer value and then record the distance driven and the amount of fuel whenever you fill up your car. You can also set reminders for regular car maintenance.

These calculations are based only on the information that you provide and not on any data from the vehicle. The fuel mileage displayed is only a reference value, and does not guarantee that the fuel mileage displayed can be obtained.

Setting the initial odometer value

Before you use the fuel consumption feature, enter the initial odometer value from which you want to start measuring the mileage.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch [Fuel Consumption]. The “Fuel Consumption” screen appears.

5 Touch [Initial Milometer Value].

The “Set Initial Milometer Value” screen appears.

6 Enter the initial odometer value and then touch

The initial odometer value has been set.

Entering the fuel consumption information

To calculate the fuel consumption for the distance you have travelled, enter the distance driven and the amount of fuel whenever you fill up your car.

1 Press the MAP button.

The Map screen appears.

Engb

Page 57

Checking useful information about your trip

Chapter

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

4 Touch [Fuel Consumption]. The “Fuel Consumption” screen appears.

5 Touch [Add].

The “Add Consumption Entry” screen appears.

6 Touch [Current Milometer Value] and then enter the current odometer value.

7 Touch [Fuel Amount] to enter the amount of fuel pumped this time.

8 Touch [Fuel Price / Unit] to enter the fuel unit price this time.

9 Touch [Add].

The “View Consumption Entry” screen appears.

10 Touch [Done].

The entry is created and the fuel consumption is displayed.

p To delete an entry, touch to display the

shortcut for deletion.

4 Touch [Fuel Consumption]. The “Fuel Consumption” screen appears.

5 Touch

6 Touch [Maintenance Schedule].

7 Touch [Add] or the one of entries.

8 Enter the name, date, and mileage for the reminder.

9 Touch [Done].

p To delete an entry, touch to display the

shortcut for deletion.

Checking useful information about your trip

Setting the car maintenance schedule

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch [Useful Information]. The “Useful Information” screen appears.

Engb

Page 58

Chapter

Customising preferences of the navigation

Customising the navigation settings

You can configure the navigation settings, and modify the behaviour of this system.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch to show the next page.

4 Touch [Settings]. The “Settings” screen appears.

! Route Preferences:

Sets the type of vehicle you are driving, the road types used in route planning, and the route planning method.

= For details, refer to “Route Preferences”

settings on page 59.

! Sound:

Adjusts the different sound volumes and changes the voice guidance profile. = For details, refer to “Sound” settings on

page 61.

! Warnings:

Enables or disables warnings and sets up the warning function. = For details, refer to “Warnings” settings

on page 62.

! Navigation Map:

Fine-tunes the appearance of the Map screen and adjusts how the software helps you navigate with different kinds of route-related information on the Map screen.

= For details, refer to “Navigation Map” set-

tings on page 62.

! Regional:

Changes the voice guidance language, the application language, and measurement units. = For details, refer to “Regional” settings

on page 64.

! Display:

Sets separate themes for daytime and

nighttime use, adjusts the display back-

light, and enables or disables menu anima-

tions.

= For details, refer to “Display” settings on

page 65.

! Traffic:

Enables or disables the TMC receiver and

sets up the traffic function.

= For details, refer to “Traffic” settings on

page 65.

! Weather:

Enables or disables the online weather fore-

cast option and the automatic download of

weather information.

= For details, refer to “Weather” settings on

page 65.

! Fuel:

Enables or disables the online fuel price op-

tion and sets up the fuel type.

= For details, refer to “Fuel” settings on

page 65.

! Trip Monitor:

Turns automatic trip log saving on or off

and checks the current size of the trip data-

base.

= For details, refer to “Trip Monitor” set-

tings on page 65.

! AVICSYNC

Displays the connection method for

AVICSYNC.

p The setting value is fixed. Use this pro-

duct as it is.

! Online Services:

Enables or disables the connected services.

= For details, refer to “Online Services” set-

tings on page 66.

! Usage Reports:

Enables or disables the collection of usage

information and GPS logs that may be used

for improving the application and the qual-

ity and coverage of maps.

= For details, refer to “Usage Reports” set-

tings on page 66.

! Start Configuration Wizard:

Engb

Page 59

Customising preferences of the navigation

Chapter

Modifies the basic software parameters used during the initial setup process.

! SyncTool:

Starts the synchronisation tool, which makes it possible to update your maps.

= For details, refer to Getting the map up-

date on page 69.

Restoring the default settings

You can restore settings or recorded content to the default settings.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch to show the next page.

4 Touch [Settings]. The “Settings” screen appears.

5 Touch the following key.

Displays the shortcuts.

6 Touch [Reset All Settings].

A confirmation message appears.

7 Touch [OK].

The recorded contents are cleared.

p If you touch [Factory Reset] on the short-

cut, all data relevant to navigation (including the items in saved locations and histories) are deleted and all settings are reset to their factory defaults.

Information on each option of “Settings”

“Route Preferences” settings

Vehicle

You can set the type of vehicle you will be using on the route. p The route is planned based on the selected

vehicle type. Route planning can also be configured to incorporate dimension, weight, and freight hazard restrictions for maps that contain such data. To enhance the route accuracy, correctly select a vehicle type that is similar to the condition of your vehicle.

! Car:

— Manoeuvre restrictions and directional

constraints are taken into account when planning a route.

— Roads are used only if access for cars is

allowed.

— Private roads and resident-only roads

are used only if they are inevitable to reach the destination.

— Walkways are excluded from routes.

! Emergency:

— All manoeuvres available at intersec-

tions are taken into account.

— Directional constraints are taken into

account in the same way as travel in the opposite direction is allowed at low speeds.

— Only private roads that need to be used

to access the destination are included.

— Walkways are excluded from routes.

! Bus:

— Manoeuvre restrictions and directional

constraints are taken into account when planning a route.

— Roads are used only if access for buses

is allowed.

— Private roads, resident-only roads and

walkways are excluded from routes.

! Taxi:

Customising preferences of the navigation

Engb

Page 60

Chapter

Customising preferences of the navigation

— Manoeuvre restrictions and directional

constraints are taken into account when planning a route.

— Roads are used only if access for taxis is

allowed.

— Private roads, resident-only roads and

walkways are excluded from routes.

! Lorry:

— Manoeuvre restrictions and directional

constraints are taken into account when planning a route.

— Only roads that allow lorry access are in-

cluded.

— Private roads, resident-only roads and

walkways are excluded from routes.

— U-turns are not used in routes (turning

around on a divided road is not considered a U-turn for the purpose of this system).

p To edit the name and estimated maximum

speed of the selected vehicle profile, touch

p To add a new vehicle profile, touch [Add

Profile]. Then select one of the vehicle

types and set the name and estimated maximum speed.

Route Planning Method

You can change the route planning method. Route calculation can be optimised for different situations and vehicle types by changing the planning method. The route planning method types are as follows.

! Fast

Calculates a route with the shortest travel time to your destination as a priority. Usually the best selection for fast and standard cars.

! Easy

Results in a route with fewer turns and no difficult manoeuvres. With this option, you can make this system to take, for example, the motorway instead of a series of smaller roads or streets.

! Short

Calculates a route with the shortest distance to your destination as a priority.

Usually practical for slower vehicles. Rarely practical to use to search for shorter routes for normal vehicles regardless of the speed.

! Economical

Calculates a route that is quick and saves fuel.

Navigation Mode

You can enable or disable off-road navigation.

! On-road

The route is planned towards the destination along the roads on the map.

! Off-road

The route is planned towards the destination in a straight line, not along the roads on the map.

Motorways

When this function is turned off, the route is calculated prioritising the avoidance of motorways. This function is useful when you want to avoid motorways when you are driving a slow car or you are towing another vehicle.

Period Charge

When this function is turned off, the route is calculated prioritising the avoidance of toll roads. This function is useful when you want to avoid toll roads with restricted time access that require you to purchase a separate pass or vignette to extend the length of time allotted for use. p This option can be enabled or disabled se-

parately from the pre-use toll road usage option.

Per-use Toll

When this function is turned off, the route is calculated prioritising the avoidance of peruse charged toll roads. This function is useful when you want to avoid toll roads where there is a per-use charge.

Engb

Page 61

Customising preferences of the navigation

Chapter

Ferries

When this function is turned off, the route is calculated prioritising the avoidance of ferries.

Car Shuttle Trains

When this function is turned off, the route is calculated prioritizing the avoidance of car shuttle trains. Car shuttle trains are used to transport vehicles for relatively short distances and they usually connect places that are not easily accessible by road.

Unpaved Roads

When this function is turned off, the route is calculated prioritising the avoidance of unpaved roads. p The navigation system avoids unpaved

roads by default.

Carpool Lanes

When this function is turned off, the route is calculated prioritising the avoidance of carpool and HOV lanes. p The navigation system avoids carpool and

HOV lanes by default.

“Sound” settings

Voice

You can adjust the volume of the guidance sounds (verbal instructions).

Alert Beeps

You can adjust the volume of the non-verbal alert sounds (beeps).

Ding

You can turn off the attention tone that precedes the verbal instructions or adjust its volume.

Voice Guidance

You can enable or disable voice guidance. p This function is enabled by default.

Announce Streets and Roads in Native Language Area

You can select whether to have the navigation system announce the street names in the native language of the area, only the road numbers, or only the manoeuvres.

Announce Streets and Roads in Foreign Language Area

You can select whether to have the navigation system read the street names in a foreign country, only the road numbers, or only the manoeuvres.

Early Indication of Manouevres

You can select whether you want an immediate announcement for the next manoeuvre or to receive the information when the manoeuvre is near.

Customising preferences of the navigation

Verbosity Level

You can set the verbosity of the voice instructions: how much information is given and how often the prompts occur. ! Minimal: Voice instructions are given once

right before the next manoeuvre.

! Medium: Voice instructions are given once

as the vehicle approaches the next manoeuvre and it is repeated right before the manoeuvre.

! Verbose: Voice instructions are given once

relatively far from the next manoeuvre, it is repeated as the vehicle approaches the next manoeuvre, and it is repeated again right before the actual manoeuvre.

Announce Route Summary

You can select whether to have the navigation system announce by voice a quick summary of the route whenever a route is calculated.

Announce Country Info

When you cross country borders, this navigation system can read out information about the country you have just entered.

Engb

Page 62

Chapter

Customising preferences of the navigation

Announce Traffic Info

You can select whether to have the navigation system announce by voice the traffic information whenever a traffic incident on your route is received.

Announce System Messages

When a system message appears, this navigation system can read out the message.

“Warnings” settings

IMPORTANT

! This system is able to warn you if you exceed

the current speed limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads on the map.

! You are liable for ensuring that using this fea-

ture is legal in the country where you intend to use it.

Speed Warning ! Warn When Speeding

You can select whether you want to receive visible and/or audible warnings. The following alert types are available: — Audio and Visual: When selected, audi-

ble and visible warnings will go off when you exceed the speed limit.

— Visual: When selected, visible warnings

will go off when you exceed the speed limit.

! Speed Limit Always Visible

You can select whether you want to see the speed limit sign on the map all the time. When you set the speed limit to always be visible, the colour of the speed limit sign changes when you exceed the speed limit.

! Warn at *** percent of the Speed Limit

(Outside Towns)

You can receive a warning when you reach the set percentage of the speed limit in rural areas.

! Warn at *** percent of the Speed Limit

(Within Towns)

You can receive a warning when you reach the set percentage of the speed limit in urban areas.

Alert Points

This setting allows you to receive a warning when approaching alert points like school zones or railroad crossings.

= For details, refer to Setting the alert point

warnings on page 66.

Warning Road Signs

Maps may contain driver alert information. Touch this key to turn on or off these warnings and to set the distance from the hazard to receive the warning at. These can be set individually for the different warning types.

“Navigation Map” settings

Map Display

You can see the effect when you change a setting.

! Viewpoint

You can adjust the basic zoom and tilt levels to your needs. Three levels are available.

! Colour Mode

You can switch between daytime and nighttime colour modes or let the software switch between the two modes automatically a few minutes before sunrise and a few minutes after sunset.

! Day Map Colour

You can select the colour scheme used in the daytime map.

! Night Map Colour

You can select the colour scheme used in nighttime map.

! Landmarks

This setting shows or hides 3D landmarks which are 3D artistic or block representations of prominent or well-known objects. p For AVIC-F970DAB, AVIC-F970BT, AVIC-

F9770DAB and AVIC-F9770BT, this function becomes effective only when the additional map data is installed.

Engb

Page 63

Customising preferences of the navigation

Chapter

! Buildings

This setting shows or hides 3D city models which are 3D artistic or block representations of complete city building data containing actual building sizes and actual positions on the map. p For AVIC-F970DAB, AVIC-F970BT, AVIC-

F9770DAB and AVIC-F9770BT, this function becomes effective only when the additional map data is installed.

! 3D Terrain

This setting shows or hides the 3D elevation of the surrounding terrain.

! Track Logs

You can turn on or off track log saving which saves the sequence of the locations you go through on your journeys.

! Place Markers

You can select which POI icons to show on the map while navigating. p When a large number of POI icons exist

on a map display, maps and POI icons become hard to see. To maintain map and POI visibility, reduce the displayed categories as much as possible.

Data Fields

You can choose to have different values displayed for when navigating a route to a select destination and for when just cruising around without any particular destination. = For details, refer to Browsing the data field

on page 31.

“First”, “Second” and “Third” selects items displayed in the data fields shown when the route exists. “Without Route” selects the items displayed in the data fields shown when a route does not exist.

Route Progress Bar

You can turn on the route progress bar to display the current route as a straight line located on the right side of the map. The arrow represents your current position and moves up the line as you travel along the route. Waypoints and traffic event markers are also displayed on the line.

Offer Motorway Services

You may need to stop by a petrol station or a restaurant during your journey.

= For details, refer to Frequently shown route

events on page 30.

Services Displayed

You can select the service types displayed for the motorway exits or service stations. Choose from the POI categories.

Automatic Overview

When selected, the map zooms out to show an overview of the surrounding area if the next route event (manoeuvre) is far. When you get close to the event, the map returns to the normal map view.

Signposts

Whenever adequate information is available, lane information similar to the real ones on road signs above the road is displayed at the top of the map. You can turn this feature on or off.

Junction View

If you are approaching a motorway exit or a complex intersection and the necessary information is available, the map is replaced with a 3D view of the junction.

Tunnel View

When entering tunnels, the surface roads and buildings can be distracting. This feature shows a generic picture of a tunnel instead of the map. A top-down overview of the tunnel and remaining distance are also displayed.

Offer Congestion Detour on Highways

When you slow down while driving on a motorway due to a traffic jam, this navigation system offers you a detour using the next exit. The message shows you the distance to the exit and the difference in the distance and estimated time compared to the original route. You can choose from one of the following options:

Customising preferences of the navigation

Engb

Page 64

Chapter

Customising preferences of the navigation

! Touch [Dismiss] or just ignore the message

if you want to keep the original route.

! Touch [Preview] to see an overview of the

original route and the detour to make the decision. You can accept the detour as shown in the preview, or increase the motorway segment bypassed before accepting.

! Turn to the suggested new direction and

the route will be automatically recalculated.

Offer Real-time Route Alternatives

Alternative routes can be suggested when driving on normal roads. This navigation system will select a different turn in the upcoming intersection and offer you a different route for the next section of the route. You cannot, however, modify the offered detour.

Offer Parking Around Destination

Parking at the destination may not be easy to find in city areas. As you approach the destination, this navigation system can offer parking category places near your destination. Touch

to open a top-down map with the destination and the offered parking places. The route is calculated by selecting one of the parking places.

Offer Hints Upon Detour

If you leave the recommended route and suddenly exit the motorway, this navigation system offers different alternatives near the exit like petrol stations or restaurants. Also, if there are avoidable parts of the original route ahead (like a tunnel, a toll road or a ferry), you will find them in the list in case you want to bypass them with the help of this navigation system.

“Regional” settings

Language

This key displays the current language of the user interface. By touching the key, you can select a new language from the list of avail-

able languages. This system will restart if you change this setting.

Voice Language

This key displays the current voice guidance profile. By touching the key, you can select a new voice guidance language from the list of available languages and speakers. Touch any of these keys to hear a sample voice prompt.

Units and Formats

You can set the various units to be used by this system. p This system may not support all the listed

units in some voice guidance languages.

p You can also set other country specific

units used to display different values in this system.

Distance

The unit of distance can be changed.

Fuel Economy

The unit of fuel mileage can be changed.

Weight

The unit of weight can be changed.

Coordinate Display Format

The format of the coordinates can be changed.

Currency

The currency unit can be set.

Time Zone

By default, the time zone is taken from the map information and adjusted according to your current location.

! Automatic Time Zone

The time zone setting changes automatically.

! Manual Time Zone

The present setting value for the time difference and daylight saving time that you set are used.

! Manual Time Zone if Auto Unavailable

Engb

Page 65

Customising preferences of the navigation

Chapter

The time zone setting changes automatically if automatic change is available. Otherwise, the present setting value that you set is used.

! Manual Time Zone in Current Zone

The present setting value that you set are used in the current time zone. If your vehicle moves to another time zone, the time zone setting changes automatically.

Time Zone

You can set the time difference.

Daylight Saving Time

You can turn on or off the daylight saving time for this navigation system.

“Display” settings

Menu Animations

When animation is turned on, the keys on the menus and keyboard screens appear in an animated way. Screen transitions are also animated.

Day Skin Theme

You can select the style and colours of the navigation menu used in the daytime.

Night Skin Theme

You can select the style and colours of the navigation menu used in the nighttime.

Show Traffic Info

You can select whether to show icons relevant to traffic incidents and lines indicating the traffic flow on the map.

! Off

No traffic icons or lines indicating the traffic flow are shown.

! Colour

Only the line relevant traffic incidents are shown on the map.

! Colour And Icon

Icons for the relevant traffic incidents and lines indicating the traffic flow are shown on the map.

Show Free Traffic Flow As Well

You can select whether to receive information on smooth traffic flow.

Offer Detour if it Saves at Least

You can set the minimum time to be saved when having the system suggest a detour route. If the estimated time saved by the planned detour avoiding the traffic incidents is more than the set time, the system suggests the new detour route. Otherwise, the new route is not suggested.

Confirm Detours Manually

You can enable or disable the manual confirmation of every recalculation.

Customising preferences of the navigation

“Traffic” settings

Traffic

You can set to enable or disable the TMC receiver that can receive real-time traffic information.

Data Source

You can select what data source you want to use for receiving real-time traffic information. [Online] is available only if the device is enabled.

“Weather” settings

p For details, refer to the manual for

AVICSYNC on our website.

“Fuel” settings

p For details, refer to the manual for

AVICSYNC on our website.

“Trip Monitor” settings

Enable Auto-Saving

= For details, refer to Setting the trip logger on

page 55.

Engb

Page 66

Chapter

Customising preferences of the navigation

Save Track Log

= For details, refer to Setting the trip logger on

page 55.

“Online Services” settings

You can use the “Online Services” settings to enable or disable connected online features. p For details, refer to the manual for

AVICSYNC on our website.

= For details, refer to Expanding the use of

the navigation functions on page 67.

Online Traffic

You can enable or disable the online traffic service.

Online Weather

You can enable or disable the online weather forecast service.

Online Parking

You can enable or disable the online parking service.

Online Fuel Prices

You can enable or disable the online fuel price service.

Online Search

You can enable or disable the online search service.

GPS Tracks

You can set to enable or disable collecting anonymous track logs for later development purposes. p The collected data is used for improving

the quality and coverage of maps. The data is processed anonymously, and no one will be able to track any personal information.

Setting the alert point warnings

You can set an alert for the different alert point categories, individually.

1 Press the MAP button.

The Map screen appears.

2 Touch the following key.

Displays the navigation menu on the Map screen.

3 Touch to show the next page.

4 Touch [Settings]. The “Settings” screen appears.

5 Touch [Warnings]. The “Warnings” screen appears.

“Usage Reports” settings

Application Usage Information

You can enable or disable the collection of anonymous statistical information on using this navigation system for later development purposes. p The collected data is used for improving

the user interface and the program workflow. The data is processed anonymously, and no one will be able to track any personal information.

Engb

6 Touch [Alert Points]. The “Alert Points” screen appears.

7 Touch [Alert Point Warnings] to turn it on.

8 Touch [Alert Types]. The “Select Alert Types” screen appears.

9 Touch any of the items to change the setting.

The warning setting screen of the selected category is shown.

Page 67

Customising preferences of the navigation

Chapter

10 Touch [Warning Type] and then touch one of the options.

The following alert types are available:

! Disabled:

The system does not warn you of the alert points for this category.

! Audio and Visual:

You will receive audible and visible warnings while you are approaching the points in this category.

! Visual:

You will receive a visible warning while you are approaching the points in this category.

p If you select “Audio and Visual” in the

warning type setting, you can change the reception timing of the audio alert. If you select “Only When Speeding”, the audio alert is only played when you exceed the given speed limit. If you select “When Ap- proaching”, the audio alert is always played when approaching one of these alert points. In order to draw your attention, the alert is different when you exceed the speed limit.

Expanding the use of the navigation functions

You can expand the use of the navigation functions to iPhone or smartphones if you connect an iPhone or a smartphone (Android) that has the AVICSYNC App installed.

Be sure to read before you use AVICSYNC function

IMPORTANT

! Premium services for AVICSYNC require a

paid subscription in order to be used, and not all services are available in all countries. Please refer to our website for more details.

! Please be aware that you may be charged

additional roaming charges by your cellular provider if you use connected services while abroad.

! If the Data Plan for your iPhone or smart-

phone (Android) does not provide for unlimited data usage, additional charges from your carrier may apply for accessing appbased connected content via networks other than Wi-Fi.

! The information which is sent by content

provider, such as search results, regulations, prices, etc. may not necessarily correspond to the actual condition. Utilise the information for your reference.

! To ensure compatibility, always use the lat-

est version of the AVICSYNC App.

Limitations:

! Access to app-based connected content will

depend on the availability of cellular and/or Wi-Fi network coverage for the purpose of allowing your smartphone to connect to the Internet.

! Service availability may be geographically lim-

ited to the region. Consult the connected content service provider for additional information.

! Ability of this product to access connected

content is subject to change without notice and could be affected by any of the following: compatibility issues with future firmware versions of smartphone; compatibility issues with future versions of the connected content application(s) for the smartphone; changes to or discontinuation of the connected Content application(s) or service by its provider.

Customising preferences of the navigation

Engb

Page 68

Chapter

Customising preferences of the navigation

! Pioneer is not liable for any issues that may

arise from incorrect or flawed app-based content.

! The content and functionality of the supported

applications are the responsibility of the App providers.

What is the AVICSYNC App?

The AVICSYNC App is a dynamic companion app that you can use to connect your iPhone or smartphone to a compatible Pioneer navigation system. Once linked, the navigation system communicates with your iPhone or smartphone to share information such as contacts, navigation history, planned routes, POI favourites, and even where you parked your vehicle. With the AVICSYNC App, your navigation system can also access Premium connected services such as real-time local search and weather, traffic, parking, and fuel price data lookup to ensure that you’ll have all the information you need to reach your desired destination. As new mapping data becomes available, you can use the AVICSYNC App to review, purchase, download, and transfer updated mapping content directly to the compatible Pioneer navigation system. In addition to augmenting your Pioneer indash navigation experience, AVICSYNC App also works as a standalone navigation app. This means that you’ll always have access to Pioneer’s accurate turn-by-turn navigation, even when you’re not in your vehicle. Access our website to check further details for the AVICSYNC App . http://www.pioneer.eu/avicsync

smartphone (Android) compatibility with the AVICSYNC App and connectivity with the navigation system are required.

AVICSYNC compatibility

AVICSYNC is available for the following models. (As of November 2014) p Depending on the software version of the

iPhone and Android, it may not be compatible with this product. For latest compatibility with this product and AVICSYNC App, refer to the information on our website.

iPhone models

! iPhone 6 Plus: iOS 8.0.x ! iPhone 6: iOS 8.0.x ! iPhone 5s: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 5c: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 5: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 4s: iOS 7.0.x, 7.1.x, 8.0.x, 8.1 ! iPhone 4: iOS 6.x

Smartphone (Android) models

SAMSUNG

! Galaxy S2: Android 4.1.2 ! Galaxy S3: Android 4.1.2, 4.3 ! Galaxy S4: Android 4.2.2, 4.4.2 ! Galaxy Note B: Android 4.1.1 ! Galaxy Tab 2: Android 4.0.3

LG ! Nexus 5: Android 4.4.2 ASUS ! Nexus 7 (2013) 4.3

Compatibility and connectivity

You need to install the free AVICSYNC App to your iPhone or smartphone (Android). To use the AVICSYNC App function, both iPhone or

Engb

Page 69

Customising preferences of the navigation

Chapter

Preparations before using the AVICSYNC function

1 Download the AVICSYNC App from App Store or Google Play and install the app to your iPhone or smartphone (Android).

To find AVICSYNC App, access the App Store or Google Play and enter “AVICSYNC” in the search box.

2 Start the AVICSYNC App on your iPhone or smartphone (Android).

3 Connect your iPhone or smartphone (Android) to the navigation system via Bluetooth or USB cable connection.

= For details of the Bluetooth connection,

refer to Chapter 11.

= For details of the USB connections, refer to

the Installation Manual.

4 Press the MAP button.

The Map screen appears.

5 Touch the following key.

Displays the navigation menu on the Map screen.

6 Touch on the navigation menu.

9 Accept the association on your iPhone or smartphone (Android).

Once the association is established, your iPhone or smartphone (Android) is automatically associated when you connect your iPhone or smartphone (Android) to the navigation system.

10 Purchase connected services via the AVICSYNC App.

11 Display the navigation menu and then touch [Settings].

12 Touch [Online Services].

13 Touch the service that you want to activate.

The menus for the connected service are activated.

Getting the map update

You can update existing content, purchase additional maps and activate extra services on your product. To update the content, download the update on your USB memory storage by using the computer to which the Naviextras Toolbox is installed. Then, transfer the data from connected USB memory storage to your navigation system by using “SyncTool” on this product. p For details, access the following URL and

refer to "HOW TO UPDATE?" GUIDE. http://pioneer.naviextras.com

Customising preferences of the navigation

7 Touch [Associate New Phone].

8 Touch the iPhone or smartphone (Android) that you want to associate with the navigation system and then touch [Associate].

Engb

Page 70

Chapter

Registering and connecting a Bluetooth de vice

If your devices feature Bluetooth®technology, this product can be connected to your devices wirelessly. This section describes how to set up a Bluetooth connection.

For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.

p The “Bluetooth” menu is available only

when you stop your vehicle in a safe place and apply the handbrake.

Preparing communication devices

This product has a built-in function that enables to use devices featuring Bluetooth wireless technology.

= For details, refer to Notes for hands-free

phoning on page 82.

You can register and use devices that feature the following profiles with this product.

! HFP (Hands-Free Profile) ! A2DP (Advanced Audio Distribution Pro-

file) ! SPP (Serial Port Profile) p When this product is turned off, the

Bluetooth connection is also disconnected.

When the system restarts, the system auto-

matically attempts to reconnect the pre-

viously-connected device. Even when the

connection is severed for some reason, the

system automatically reconnects the speci-

fied device (except when the connection is

severed due to device operation).

Registering your Bluetooth devices

You need to register your devices featuring Bluetooth wireless technology when you connect it to this product for the first time. A total

of three devices can be registered. Two registration methods are available:

! Searching for nearby Bluetooth devices ! Pairing from your Bluetooth devices

p If three devices are already paired, “Mem-

ory Full” is displayed and pairing cannot

be performed. In such cases, delete a paired device first.

= For details, refer to Deleting a registered

device on page 72.

Searching for nearby Bluetooth devices

The system searches for available Bluetooth devices near this product, displays them in a list, and registers them for connection. p When the device is already connected, this

function is inactive.

1 Activate the Bluetooth wireless technology on your devices.

p For some Bluetooth devices, no specific ac-

tion is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices.

p Set the device visible to other devices.

2 Press the HOME button to display the Top menu screen.

3 Touch the following keys in the following order.

The “Bluetooth” screen appears.

4 Touch [Connection].

The following screen appears.

Engb

Page 71

Registering and connecting a Bluetooth de vice

p The PIN code is set to “0000” as the default,

but can be changed.

= For details, refer to Entering the PIN code

for Bluetooth wireless connection on

page 73.

p Once the connection is established, the de-

vice name is displayed. Touch the device name to disconnect.

5 Touch the following key.

Starts searching.

After the device is successfully registered, a Bluetooth connection is established from the system. The profile icons displayed on the registered device list screen light up as follows.

Chapter

The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.

p Up to 20 devices will be listed in the order

that the devices are found.

6 Wait until your Bluetooth device appears in the list.

p If you cannot find the Bluetooth device that

you want to connect, check that the device is waiting for a Bluetooth wireless technology connection.

7 Touch the name of the Bluetooth device you want to register.

While connecting, “Pairing… Please wait.” is displayed. If the connection is established, “Paired.” is displayed.

p If your device supports SSP (Secure Simple

Pairing), a six-digit number appears on the display of this product. Touch [Yes] to pairing the device.

p If the connection fails, “Error” is displayed.

In such cases, try again from the beginning.

Lights up when your mobile device is successfully connected with the HFP (Hands-Free Profile).

Lights up when your audio device is successfully connected with the A2DP (Advanced Audio Distribution Profile)/AVRCP (Audio/Video Remote Control Profile).

Lights up when the Bluetooth connection is established with the SPP (Serial Port Profile).

p After pairing, the phone book registered in

the device may be automatically trans-

mitted to this product. # If you touch the following key, you can switch the display between the device names and Bluetooth device addresses.

Switches between the device names and Bluetooth device addresses.

Pairing from your Bluetooth devices

You can register a Bluetooth device by setting this product to standby mode and requesting a connection from the Bluetooth device.

p Before registration, make sure that “Visibi-

lity” in the “Bluetooth” menu is set to “On”.

Registering and connecting a Bluetooth device

Engb

Page 72

Chapter

Registering and connecting a Bluetooth de vice

= For details, refer to Switching visibility on

page 73.

1 Activate the Bluetooth wireless technology on your devices.

p For some Bluetooth devices, no specific ac-

tion is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices.

2 Use the Bluetooth setting in the device to pair this product with the device.

p If a PIN code input is required, enter a PIN

code. (The default PIN code is “0000”.) When the device is successfully registered, the connection settings are made from the device.

p If registration fails, repeat the procedure

from the beginning.

Connecting to a Bluetooth device automatically

If this function is set to on, a connection between your Bluetooth device and this product will take place automatically as soon as the two devices are less than a few metres apart. Initially, this function is set to on. p If this function is set to on, a connection

with the last connected Bluetooth device will be established automatically when the ignition switch is turned on.

! Off:

Turns the automatic connection off.

If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to this product will automatically be established. If connection fails, “Bluetooth auto connec- tion failed. Retry?” appears. Touch [Ye s ] to reconnect.

Deleting a registered device

When you have already registered three Bluetooth devices and you want to add another one, you must first delete one of the registered devices. p If a registered phone is deleted, all the

phone book entries and call history lists that correspond to the phone will be also cleared.

CAUTION

Never turn this product off while the paired Bluetooth device is being deleted.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [Auto Connect] repeatedly until the desired setting appears.

! On (default):

Turns the automatic connection on.

Engb

The “Bluetooth” screen appears.

3 Touch [Connection].

The following screen appears.

Page 73

Registering and connecting a Bluetooth de vice

4 Touch the following key.

Deletes a paired device.

A confirmation message appears.

5 Touch [Yes].

The device is deleted.

5 Touch the name of the device that you want to connect.

Connecting a registered Bluetooth device manually

Connect the Bluetooth device manually in the following cases: ! Two or more Bluetooth devices are regis-

tered, and you want to manually select the device to be used.

! You want to reconnect a disconnected

Bluetooth device.

! Connection cannot be established automa-

tically for some reason. To start the connection manually, carry out the following procedure.

Switching visibility

This function sets whether or not to make this product visible to other devices. Initially, this function is set to on.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

Chapter

Registering and connecting a Bluetooth device

1 Activate the Bluetooth wireless technology on your devices.

p For some Bluetooth devices, no specific ac-

tion is necessary to activate Bluetooth wireless technology. For details, refer to the instruction manual of your devices.

2 Press the HOME button to display the Top menu screen.

3 Touch the following keys in the following order.

The “Bluetooth” screen appears.

4 Touch [Connection].

The following screen appears.

The “Bluetooth” screen appears.

3 Touch [Visibility] repeatedly until the desired setting appears.

! On (default):

Turns the visibility on.

! Off:

Turns the visibility off.

Entering the PIN code for Bluetooth wireless connection

To connect your Bluetooth device to this product via Bluetooth wireless technology, you need to enter a PIN code on your Bluetooth device to verify the connection. p The default code is “0000”, but you can

change it with this function.

Engb

Page 74

Chapter

Registering and connecting a Bluetooth de vice

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [PIN Code Input]. The “PIN Code” screen appears.

4 Touch [0] to [9] to input pin code (up to 8 digits).

5 Touch the following key.

Stores the PIN code in this product.

Displaying the Bluetooth address

You can check the Bluetooth address of this product.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

Clearing the Bluetooth memory

CAUTION

Never turn this product off while the Bluetooth memory is being cleared.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [Bluetooth Memory Clear].

4 Touch [Clear].

The confirmation screen appears.

5 Touch [OK].

The Bluetooth memory is cleared.

# If you do not want to clear the memory, touch [Cancel].

Updating Bluetooth software

This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the Bluetooth

connection is disconnected before the process starts.

The “Bluetooth” screen appears.

3 Touch [Device Information].

The Bluetooth address is displayed.

Engb

CAUTION

Never turn this product off while the software is being updated.

1 Press the HOME button to display the Top menu screen.

Page 75

Registering and connecting a Bluetooth de vice

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [BT Software Update].

4 Touch [Start].

The data transfer screen is displayed.

p Follow the on-screen instructions to finish

updating the Bluetooth software.

Displaying the Bluetooth software version

If this product fails to operate properly, you may need to consult your dealer for repair. In such cases, you may be asked to specify the software version. Perform the following procedure to check the version on this unit.

Chapter

Registering and connecting a Bluetooth device

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [Bluetooth Version Information].

The version of this product’s Bluetooth module appears.

Engb

Page 76

Chapter

Using hands-free phoning

CAUTION

For your safety, avoid talking on the phone as much as possible while driving.

If your mobile phone features Bluetooth technology, this product can be connected to your mobile phone wirelessly. Using this hands-free function, you can operate this product to make or receive phone calls. This section describes how to set up a Bluetooth connection and how to operate a mobile phone featuring Bluetooth technology on this product.

For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website.

Displaying the phone menu

p Connect a mobile phone to this product for

using hands-free phoning. = For details, refer to Chapter 11.

p The Phone icon is displayed on the follow-

ing screens.

— Top menu screen — AV operation screen — On the App control side bar on the

AppRadio Mode and MirrorLink mode screens

Touch panel keys

6 7

1 2 3

4 5

1 Displays the preset dial screen. 2 Switches to the phone book list. 3 Switches to the missed, received and dialled

call lists.

4 Switches the mode to enter the phone num-

ber directly.

5 Switches to the voice recognition function. 6 Displays the Setting menu screen. 7 Closes the screen. 8 Displays entries in the list by the initial charac-

ter.

Reading the screen

1 32456

% Touch the following key.

Displays the Phone menu screen.

p The “Phone Book” screen appears when

using this function for the first time. The screen of the last-used function appears from the next time.

Engb

1 Menu title 2 Name of the connected mobile phone 3 Battery status of the mobile phone 4 Reception status of the mobile phone 5 Indicates that a Bluetooth telephone is con-

nected. The list number of the connected device is displayed.

6 List display area

Page 77

Using hands-free phoning

Chapter

Making a phone call

You can make a phone call in many different ways.

Direct dialling

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Dial” screen appears.

1 2

1 Dial pad 2 Deletes one digit. Touch and hold to delete

all digits.

3 Touch the number keys to enter the phone number.

4 Touch the following key.

Makes a call.

5 Touch the following key.

Ends the call.

Calling a number in the phone book

After finding the number you want to call in the phone book, you can select the entry and make the call. p The contacts on your phone will normally

be transferred to this product automatically when the phone is connected. If the contacts are not transferred automatically, you can transfer the contacts using the phone menu of the mobile phone. To transfer the contacts using the phone menu of the mobile phone, set this product visible to other devices. = For details, refer to Switching visibility

on page 73.

1 Press the HOME button to display the Top menu screen.

Touch the following keys in the following order.

The “Phone Book” screen appears.

3 Touch the desired name on the list.

The details screen of the phone book appears.

Touch the phone number you want to dial.

The dial screen appears.

5 Dialling starts.

p To cancel the call, touch .

6 Touch the following key.

Using hands-free phoning

The call ends.

p You may hear a noise when you hang up

the phone.

The call ends.

Ends the call.

Engb

Page 78

Chapter

Using hands-free phoning

Selecting a number by alphabet search mode

If many phone numbers are registered in the phone book, you can search for phone numbers by alphabet search mode.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Phone Book” screen appears.

3 Drag the Initial Search Bar to find an entry by the initial character of the name.

The alphabet corresponding to the current position on the Initial Search Bar is displayed.

4 Release the Initial Search Bar at the desired alphabet.

The “Phone Book” entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected) will be displayed.

p To refine the search with a different letter,

touch [Cancel].

p When the system language is set to Rus-

sian, the following key appears. If you want to change the character, touch the following key until the desired character repeatedly.

8 Touch the following key.

Ends the call.

The call ends.

Dialling from the history

The most recent calls made (dialled, received and missed) are stored in the call history list. You can browse the call history list and call numbers from it.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “History” screen appears.

p Depending on the type of mobile phone,

some calls may not be displayed in the call history.

Changes the character.

5 Touch an entry to display the phone number list of the entry.

The details screen of the phone book appears.

6 Touch the phone number you want to dial.

The dial screen appears.

7 Dialling starts.

p To cancel the call, touch .

Engb

1 Type of call history

Received calls.

Dialled calls.

Missed calls.

Page 79

Using hands-free phoning

Chapter

3 Touch the desired entry on the list to make a call.

The dial screen appears.

4 Dialling starts.

p To cancel the call, touch .

5 Touch the following key.

Ends the call.

The call ends.

Using the preset dial lists

You can dial a number from the preset dial list.

Registering a phone number

You can easily store up to six phone numbers per device as presets.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Preset Dial” screen appears.

3 Touch the desired entry on the list to make a call.

The dial screen appears.

4 Dialling starts.

p To cancel the call, touch .

5 Touch the following key.

Ends the call.

The call ends.

Deleting a phone number

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

Using hands-free phoning

The “Phone Book” or “History” screen appears.

3 Touch the following key.

Registers the phone number to the “Preset Dial” list.

Dialling from the preset dial list

1 Press the HOME button to display the Top menu screen.

The “Preset Dial” screen appears.

3 Touch the following key.

Deletes the phone number.

Receiving a phone call

You can answer an incoming call to your mobile phone via this product.

Engb

Page 80

Chapter

Using hands-free phoning

Answering an incoming call

This product informs you that it is receiving a call by displaying a message and producing a ring sound.

p You can set the system to automatically an-

swer incoming calls. If this product is not set to automatically answer incoming calls, answer the calls manually.

= For details, refer to Answering a call

automatically on page 81.

p The registered name appears if the phone

number of the received call is already registered in “Phone Book”.

1 Touch the following key.

Answers an incoming call.

Minimising the dial confirmation screen

p The dial confirmation screen cannot be

minimised on the AV operation screen.

p AV sources cannot be selected even if the

dial confirm screen is minimised while talking on the phone.

1 Touch the following key.

The dial confirmation screen is minimised.

2 Touch the following key.

Displays the dial confirmation screen again.

Rejects an incoming call.

The rejected call is recorded in the missed call history list.

= For details, refer to Dialling from the history

on page 78.

2 Touch the following key.

Ends the call.

The call ends.

Engb

Page 81

Using hands-free phoning

Chapter

Changing the phone settings

Answering a call automatically

This product automatically answers incoming calls to the connected mobile phone, so you can answer calls while driving without taking your hands off the steering wheel. When “Auto Answer” is set to “On”, an incoming call will be automatically answered in 5 seconds.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [Auto Answer] repeatedly until the desired setting appears.

! Off (default):

Turns the automatic answering off.

! On:

Turns the automatic answering on.

Switching the ring tone

You can select whether or not to use this product’s ring tone.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

Turns the ring tone on.

! Off:

Turns the ring tone off.

Inverting names in the phone book

When your device is connected to this product, the first and last names of your contacts may be registered to the phone book in reverse order. You can use this function to change the order back. (Inverting the names in the phone book)

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “Bluetooth” screen appears.

3 Touch [Invert Name].

The confirmation screen appears.

4 Touch [Yes].

p If the inversion fails, “Invert Name Error”

appears. In such cases, try again from the beginning.

p Inverting the names of your contacts from

this product does not affect the data on your mobile phone.

Setting the private mode

During a conversation, you can switch to private mode (talk directly on your mobile phone).

Using hands-free phoning

The “Bluetooth” screen appears.

3 Touch [Ring Tone] repeatedly until the desired setting appears.

! On (default):

Engb

Page 82

Chapter

Using hands-free phoning

% Touch the following keys to turn private mode on or off.

Talk directly on your mobile device.

Hands-free phoning

Adjusting the other party’s listening volume

To maintain good sound quality, this product can adjust the other party’s listening volume. If the volume is too loud or not loud enough, use this function.

% Touch the following key.

Switches between the three volume levels.

p This function can be performed even while

talking on the phone.

p Settings can be stored for each device.

Using the voice recognition function

You can use the voice recognition function of iPhone or smartphone. p When an iPhone running iOS 6.1 or higher

is used, Siri Eyes Free Mode is available with this product.

p For AVIC-F77DAB and AVIC-F70DAB users

For using this function with a smartphone, the device must be compatible with

Android Auto and “Mode” in “Smartphone Setup” must be set to “Android Auto” beforehand.

= For details, refer to Information on the

connections and functions for each device on page 86.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys to start voice control.

The voice recognition function launches and the voice control screen appears.

You can use the voice recognition function in the same way as using it on the iPhone or smartphone.

p You can also launch the voice recognition

function by pressing and holding the HOME button.

Indicates that this product is on standby for your voice commands.

Cancels the voice recognition function.

Notes for hands-free phoning

General notes

! Connection to all mobile phones featuring

Bluetooth wireless technology is not guaranteed.

Engb

Page 83

Using hands-free phoning

Chapter

! The line-of-sight distance between this pro-

duct and your mobile phone must be

10 metres or less when sending and receiv-

ing voice and data via Bluetooth technol-

ogy. However, the actual transmission

distance may be shorter than the estimated

distance, depending on the usage environ-

ment. ! With some mobile phones, the ring sound

may not be output from the speakers. ! If private mode is selected on the mobile

phone, hands-free phoning may be dis-

abled.

Registration and connection

! Mobile phone operations vary depending

on the type of mobile phone. Refer to the

instruction manual that came with your

mobile phone for detailed instructions. ! With mobile phones, phone book transfer

may not work even though your phone is

paired with this product. In that case, dis-

connect your phone, and then perform

pairing again from your phone to this pro-

duct.

Making and receiving calls

! You may hear a noise in the following situa-

tions:

— When you answer the phone using the

button on the phone.

— When the person on the other end of

the line hangs up the phone.

! If the person on the other end of the line

cannot hear the conversation due to an

echo, decrease the volume level for hands-

free phoning. This may reduce the echo. ! With some mobile phones, even if you

press the accept button on the mobile

phone when a call comes in, hands-free

phoning may not be performed. ! The registered name appears if the phone

number of the received call is already regis-

tered in the phone book. When one phone

number is registered under different

names, only the phone number is dis-

played.

! If the phone number of the received call is

not registered in the phone book, the phone number of the received call appears.

The received call and the dialled number histories

! You cannot make a call to the entry of an

unknown user (no phone number) in the received call history.

! If calls are made by operating your mobile

phone, no history data will be recorded in this product.

Phone book transfers

! If there are more than 800 phone book en-

tries on your mobile phone, all entries may not be downloaded completely.

! With some mobile phones, it may not be

possible to transfer all items in the phone book at one time. In this case, transfer items one by one from your mobile phone.

! Depending on the mobile phone, this pro-

duct may not display the phone book correctly. (Some characters may be garbled, or the order of first and last names may be reversed.)

! If the phone book in the mobile phone con-

tains image data, the phone book may not be transferred correctly. (Image data cannot be transferred from the mobile phone.)

! Depending on the mobile phone, phone

book transfer may not be available.

Using hands-free phoning

Engb

Page 84

Chapter

iPod / iPhone or smartphone setup operation

When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device.

The basic flow of iPod / iPhone or smartphone setup

1 Select the method for connecting your de-

vice.

= For details, refer to Setting the device

connection method on page 84.

2 Connect your device to this product.

= For details of the connections, refer to

the Installation Manual.

3 If necessary, connect your device to this

product via Bluetooth connection. = For details of the Bluetooth connection,

refer to Chapter 11.

Setting the device connection method

If you want to use the application for iPhone or smartphone on this product, you must select the method for connecting your device. Settings are required according to the connected device.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [Input/Output Settings].

4 Touch [Smartphone Setup]. The “Smartphone Setup” screen appears.

5 Configure the following settings.

! Device: Select the device to be connected. ! Connection: Select the connection meth-

od.

p Configure the settings correctly according

to the device to be connected and the connection method to be used.

= For details, refer to Information on the

connections and functions for each device on page 86.

p If you change the setting, the confirmation

screen appears. Touch [OK]. The setting will change after the following processes are automatically executed.

— The source is turned off. — AppRadio Mode or MirrorLink mode is

exited.

— The smartphone connection (USB and

Bluetooth) is disconnected.

To cancel, touch [Cancel].

p The setting cannot be changed for a while

after the setting is changed.

iPod compatibility

This product supports only the following iPod models and iPod software versions. Others may not work correctly. Made for

! iPhone 6 Plus: iOS 8 ! iPhone 6: iOS 8 ! iPhone 5s: iOS 7.0.3 ! iPhone 5c: iOS 7.0.3 ! iPhone 5: iOS 7.0.3 ! iPhone 4s: iOS 7.0.3 ! iPhone 4: iOS 7.0.3 ! iPhone 3GS: iOS 6.0.1 ! iPod touch (5th generation): iOS 6.0.1 ! iPod touch (4th generation): iOS 6.0.1 ! iPod touch (3rd generation): iOS 5.1.1 ! iPod touch (2nd generation): iOS 4.2.1 ! iPod classic 160GB (2009): Ver. 2.0.4

Engb

Page 85

iPod / iPhone or smartphone setup operation

Chapter

! iPod classic 160GB (2008): Ver. 2.0.1 ! iPod classic 80GB: Ver. 1.1.2 ! iPod nano (7th generation) ! iPod nano (6th generation): Ver. 1.2 ! iPod nano (5th generation): Ver. 1.0.2 ! iPod nano (4th generation): Ver. 1.0.4 ! iPod nano (3rd generation): Ver. 1.1.3

p You can connect and control an iPod com-

patible with this product by using sepa-

rately sold connector cables. p Operation methods may vary depending on

the iPod model and the software version of

the iPod. p Depending on the software version of the

iPod, it may not be compatible with this

product.

For details about iPod compatibility with

this product, refer to the information on our

website.

This manual applies to the following iPod models.

iPod with 30-pin connector

! iPhone 4s ! iPhone 4 ! iPhone 3GS ! iPod touch 4th generation ! iPod touch 3rd generation ! iPod touch 2nd generation ! iPod classic 160GB ! iPod classic 80GB ! iPod nano 6th generation ! iPod nano 5th generation ! iPod nano 4th generation ! iPod nano 3rd generation

iPod with Lightning connector

! iPhone 6 Plus ! iPhone 6 ! iPhone 5s ! iPhone 5c ! iPhone 5 ! iPod touch 5th generation ! iPod nano 7th generation

Android™device compatibility

p Operation methods may vary depending on

the Android device and the software version of the Android OS.

p Depending on the version of the Android

OS, it may not be compatible with this product.

p Compatibility with all Android devices is

not guaranteed.

= For details about Android device compat-

ibility with this product, refer to the information on our website.

AppRadio Mode Compatibility

iPod with 30-pin connector

! iPhone 4s ! iPhone 4 ! iPod touch 4th generation

iPod with Lightning connector

! iPhone 6 Plus ! iPhone 6 ! iPhone 5s ! iPhone 5c ! iPhone 5 ! iPod touch 5th generation = For details about Android device compat-

ibility with this product, refer to the information on our website.

MirrorLink device compatibility

p This product is compatible with MirrorLink

version 1.0.

p Compatibility with all MirrorLink devices is

not guaranteed.

= For details about MirrorLink device com-

patibility with this product, refer to the information on our website.

iPod / iPhone or smartphone setup operation

Engb

Page 86

Chapter

iPod / iPhone or smartphone setup operation

Information on the connections and functions for each device

The settings and cables required for connecting each device, and the available sources are as follows.

iPod / iPhone with a 30-pin connector

Required cable (sold separately)

Smartphone Setup

Bluetooth connection

Connection requirement —

Available source

Device iPhone/iPod iPhone/iPod iPhone/iPod

Connection Bluetooth USB USB

iPod (audio) — 11

iPod (video) — 11

aha 111

AppRadio Mode ——1

AVICSYNC App 111

Cable connection is not required.

Bluetooth connection is required.

CD-IU201V CD-IU201S

——

Connect to USB port 1 for using aha or AVICSYNC App.

Connect to USB port 1 for using aha,

AppRadio Mode,or AVICSYNC App.

Engb

Page 87

iPod / iPhone or smartphone setup operation

Chapter

iPod / iPhone with a Lightning connector

Required cable (sold separately)

Smartphone Setup

Bluetooth connection

Connection requirement —

Available source

Remarks ——

(*1) Use AppRadio Mode to play music or videos on an iPod. For using AppRadio Mode, install the CarMediaPlayer app on your iPod.

= For details about the CarMediaPlayer, refer to the information on our website. = Refer to the CarMediaPlayer manual for more information.

Device iPhone/iPod iPhone/iPod iPhone/iPod iPhone/iPod

Connection Bluetooth USB

iPod (audio) — 1 — (*1) — (*1)

iPod (video) ———(*1) — (*1)

aha 1111

AppRadio Mode

AVICSYNC App 1111

Cable connection is not required.

Bluetooth connection is required.

——11

CD-IU52

—

Connect to USB port 1 for using

aha or AVICSYNC App.

! CD-IH202 ! CD-IU52 ! Lightning Di-

gital AV Adapter

Digital AV adapter

Bluetooth connection is required.

——

! This connec-

tion and settings are available on AVICF77DAB.

iPod / iPhone or smartphone setup operation

! CD-IV202AV ! CD-IU52 ! Lightning to

VGA Adapter

VGA adapter

Bluetooth connection is required.

! This connec-

tion and settings are available on AVICF70DAB, AVICF970DAB, AVICF970BT, AVICF9770DAB, and AVICF9770BT.

Engb

Page 88

Chapter

iPod / iPhone or smartphone setup operation

Android, MirrorLink

Required cable (sold separately)

Device Others Others Others

Smartphone Setup

Bluetooth connection

Connection requirement —

Available source

Connection Bluetooth USB HDMI

Mode —

aha 1 (*2) 11(*2)

AppRadio Mode ——1

MirrorLink — 1 (*2) —

Android Auto — 1 (*1) (*2) —

AVICSYNC App 1 (*3) 1 (*3) 1 (*3)

Cable connection is not required.

Bluetooth connection is required.

CD-MU200 CD-AH200

Android Auto (*1)/ MirrorLink/Off

Bluetooth connection is required for using aha or Android Auto.

Connect to USB port 2 for using

MirrorLink, Android Auto or AVICSYNC App.

—

Bluetooth connection is required.

—

! Select “Android

Auto” for

“Mode” for using Android

Remarks —

(*1) For AVIC-F77DAB and AVIC -F70DAB users Available only when an Android Auto-compatible device is connected. The AVICSYNC App function automatically turns off when an Android Auto-compatible device is connected with this product for the first time. From the next time a compatible device is connected, Android Auto cannot be used while the AVICSYNC App function is on. (*2) Not available when the AVICSYNC App function is turned on. (*3) Turn on the AVICSYNC App function for using AVICSYNC App.

Engb

Auto.

! Select

“MirrorLink” for “Mode” for

using

MirrorLink

mode.

! This connection

and settings are available on AVIC-F77DAB.

Page 89

Using the radio

Chapter

You can listen to the radio using this product. This section describes operations for the radio.

Using the touch panel keys

12 43

1 Displays the source list.

= For details, refer to Selecting a front

source on the source list on page 21.

2 Selects a band.

= For details, refer to Selecting a band on

page 90.

3 Displays the Time and date setting

screen.

= For details, refer to Setting the time and

date on page 201.

4 Displays the Setting menu screen. 5 Recalls equaliser curves.

= For details, refer to Using the equaliser

on page 181.

6 Stores song information to an iPod.

= For details, refer to Storing song informa-

tion to an iPod ( iTunes Tagging) on page

201.

7 Displays the Phone menu screen.

= For details, refer to Displaying the phone

menu on page 76.

8 Performs manual tuning or seek tuning.

= For details, refer to Manual tuning on

page 90.

= For details, refer to Seek tuning on page

90.

9 Displays the preset channels.

= For details, refer to Selecting a preset

channel from the preset channel list on

page 91.

a Recalls the preset channel stored to a key

from memory with a single touch of the key. Stores the current broadcast frequency to a key for later recall by continuing to touch the key.

= For details, refer to Storing broadcast fre-

6 7

quencies on page 91.

Reading the screen

1 Band indicator

Shows the tuned band: FM1, FM2, FM3 or MW/LW.

2 Current time and date 3 Programme service name indicator

Shows the programme service name (station name) of the current station.

p When “MW/LW” is selected, the fre-

quency will be displayed instead.

4 Radio text display area

Displays the radio text currently being received.

p When “MW/LW” is selected, nothing is

displayed.

5 Song information

Shows the title of the current song and/or the artist name for the current song (when available).

p When “MW/LW” is selected, nothing is

displayed.

6 iTunes®tagging song status indicator

Using the radio

3 4

786

Engb

Page 90

Chapter

Using the radio

Shows the status of the song information stored in this product.

p The icon is displayed on all operation

screens of AV sources.

Indicator Meaning

Appears when the song information tag is stored in this product.

Appears when the song information tag is being transferred to an iPod.

7 iTunes®tagging indicator

Indicates songs that are capable of iTunes tagging.

p The icon is displayed on all operation

screens of AV sources.

Indicator Meaning

Appears when this product receives an iTunes song tag that can be stored and then downloaded to an iPod for later purchase.

Flashes when this product is storing song tag information.

8 Frequency-seek indicator 9 Preset number indicator

Highlights the selected preset item.

Starting procedure

1 Display the AV source selection screen.

= For details of the operations, refer to Dis-

playing the AV operation screen on page 20.

2 Touch [Radio] on the AV source selection screen. The “Radio” screen appears.

Selecting a band

% Touch the following key.

Switches between the following FM bands: FM1, FM2 and FM3.

Switches to the MW/LW band.

p This function is convenient for preparing

different preset lists for each band.

Manual tuning

% Touch the following keys to tune manually.

Moves down one step at a time.

Moves up one step at a time.

p This function is convenient for preparing

different preset lists for each band.

Seek tuning

% Touch and hold one of the following keys for about one second and then release.

Scans frequencies until it finds a broadcast strong enough for good reception. You can cancel seek tuning by touching either key briefly. If you keep holding either key, you can skip broadcasting frequencies. Seek tuning will start when you release the key.

3 Use the touch panel keys on the screen to control the radio.

= For details, refer to Using the touch panel

keys on page 89.

Engb

Page 91

Using the radio

Chapter

Selecting a preset channel from the preset channel list

Once you have stored broadcast channels, you can easily recall preset channels from memory with a single touch of a key.

= For details, refer to Storing broadcast fre-

quencies on page 91.

1 Touch the preset channel list display key.

1 Preset channel list display key

2 Touch the item on the list (“1” to “6”)to switch to a channel registered as a preset channel.

p If you touch the preset channel list display

key while the preset channel list is displayed, the list disappears and the preset tuning keys are displayed.

Storing broadcast frequencies

With a touch of any of the preset tuning keys (“1” to “6”), you can easily store up to six broadcast channels for later recall (also with the touch of a key).

1 Select a frequency that you want to store in memory.

2 Touch and hold a preset tuning key [1] to [6].

The selected radio station is stored in memory. The next time you touch the preset tuning key “1” to “6”, the broadcast channel is recalled from memory.

p Up to 18 FM stations, six for each of the

three FM bands, as well as six MW/LW stations, can be stored in memory.

Storing the strongest broadcast frequencies

BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6” and, once stored there, you can tune into them with the touch of a key. p Storing broadcast frequencies with BSM

may replace broadcast frequencies you have already saved.

p Previously stored broadcast frequencies

may remain stored if the number of strong broadcast frequencies stored has not reached the limit.

1 Touch the preset channel list display key.

The preset channel list appears.

2 Touch [BSM] to start a search.

A message appears. While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys “1” to “6” in order of their signal strength. When this is complete, the message disappears.

# If you touch [Cancel], the storage process is cancelled.

Tuning into strong frequencies

Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals for good reception. p This setting is available only when “Radio”

is selected as the source.

1 Press the HOME button to display the Top menu screen.

Using the radio

Engb

Page 92

Chapter

Using the radio

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [AV Source Settings].

The following screen appears.

4 Touch [Radio Settings].

The following screen appears.

5 Touch [Local].

The pop-up menu appears.

6 Touch the item you want to set.

! Off (default):

Turns the seek tuning setting off.

! Level1:

Sets the level of sensitivity for FM to level 1.

! Level2:

Sets the level of sensitivity for FM to level 2.

! Level3:

Sets the level of sensitivity for FM to level 3.

! Level4:

Sets the level of sensitivity for FM to level 4.

MW/LW

! Off (default):

Turns the seek tuning setting off.

! Level1:

Sets the level of sensitivity for MW/LW to level 1.

! Level2:

Sets the level of sensitivity for MW/LW to level 2.

p The FM “Level4” (MW/LW “Level2”) setting

allows reception of only stations with the strongest signals, while lower settings allow reception of those with weaker signals.

Receiving traffic announcements

TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or another enhanced network’s TP station (a station carrying information that cross-references TP stations). p This function can only be used on the FM

band.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [AV Source Settings].

The following screen appears.

Engb

Page 93

Using the radio

4 Touch [Radio Settings].

The following screen appears.

6 Tune into a TP station or another enhanced network’s TP station.

7 Use the VOL (+/–) button to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic announcements.

p You can cancel the news programme by

changing the source.

p The system switches back to the original

source following traffic announcement reception.

p Only TP stations and other enhanced net-

works’ TP stations are tuned in during seek tuning or BSM when the TA function is on.

Chapter

Using the radio

5 Touch [TA Interrupt] repeatedly until the desired setting appears.

F77DAB F70DAB F970DAB

! TA OFF (default):

Does not receive traffic announcements automatically.

! DAB+RDS TA:

Receives traffic announcements automatically from DAB or RDS stations.

! RDS TA ONLY:

Receives traffic announcements automatically from RDS stations only.

F970BT F9770BT

! Off (default):

Does not receive traffic announcements automatically.

! On:

Receives traffic announcements automatically.

p The selected setting also applies to “TA In-

terrupt” under “DAB Settings” in AVIC-

F77DAB, AVIC-F70DAB, AVIC-F970DAB, and AVIC-F9770DAB.

F9770DAB

Using news programme interruption

When a news programme is broadcast from a PTY code news station, this product can switch from any station to the news broadcast station. When the news programme ends, reception of the previous programme resumes. p This function can only be used on the FM

band.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [AV Source Settings].

The following screen appears.

Engb

Page 94

Chapter

Using the radio

2 Touch the following keys in the following order.

The “System” screen appears.

4 Touch [Radio Settings].

The following screen appears.

5 Touch [News Interrupt] repeatedly until the desired setting appears.

! Off (default):

Deactivates the news programme interruption function.

! On:

Activates the news programme interruption function.

p You can cancel the news programme by

changing the source.

Tuning into alternative frequencies

If you are listening to a broadcast and the reception becomes weak or there are other problems, this product will automatically search for a different station in the same network that is broadcasting a stronger signal. p This function can only be used on the FM

band.

1 Press the HOME button to display the Top menu screen.

3 Touch [AV Source Settings].

The following screen appears.

4 Touch [Radio Settings].

The following screen appears.

5 Touch [Alternative FREQ] repeatedly until the desired setting appears.

! On (default):

Turns the alternative frequencies function on.

! Off:

Turns the alternative frequencies function off.

p Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

p When you recall a preset station, the tuner

may update the preset station with a new frequency from the station’s AF list. No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station.

Engb

Page 95

Using the radio

p Sound may be temporarily interrupted by

another programme during an AF frequency search.

p AF can be turned on or off independently

for each FM band.

Limiting stations to regional programming

When AF (alternative frequency) is used to automatically retune frequencies, the regional function limits the selection to stations broadcasting regional programmes. p This function can only be used on the FM

band.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “System” screen appears.

Chapter

Using the radio

5 Touch [Regional] repeatedly until the desired setting appears.

! On (default):

Turns the regional function on.

! Off:

Turns the regional function off.

p Regional programming and regional net-

works are organised differently depending on the country (i.e. they may change according to the time, country or broadcast area).

p The preset number on the display may dis-

appear if the tuner tunes into a regional station that differs from the originally set station.

p The regional function can be turned on or

off independently for each FM band.

3 Touch [AV Source Settings].

The following screen appears.

4 Touch [Radio Settings].

The following screen appears.

Switching Auto PI seek

If this product fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, this product will automatically search for a different station with the same programming.

Activating the Auto PI seek for preset stations

This product can automatically search for a different station with the same programming, even during preset recall. p “Auto PI” can be set only when the source

is turned off.

1 Press the HOME button to display the Top menu screen.

Engb

Page 96

Chapter

Using the radio

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [AV Source Settings].

The following screen appears.

4 Touch [Radio Settings].

The following screen appears.

1 Press the HOME button to display the Top menu screen.

2 Touch the following keys in the following order.

The “System” screen appears.

3 Touch [AV Source Settings].

The following screen appears.

4 Touch [Radio Settings].

The following screen appears.

5 Touch [Auto PI] repeatedly until the desired setting appears.

! Off (default):

Deactivates the Auto PI seek function.

! On:

Activates the Auto PI seek function.

Switching the sound quality of the FM tuner

You can select the sound quality from the three settings according to the circumstances of use. p This function can only be used on the FM

band.

Engb

5 Touch [Tuner Sound].

The pop-up menu appears.

6 Touch the item you want to set.

! Standard (default):

Switches to the standard settings.

! Talk:

Switches to settings that prioritise noise prevention.

! Music:

Switches to the settings that give priority to the sound quality.

Page 97

Using the radio

Storing song information to an iPod (iTunes Tagging)

= For details, refer to Storing song information

to an iPod (iTunes Tagging) on page 201.

Operating with the hardware buttons

Press the TRK button.

You can move up or down the preset channels.

Press and hold the TRK button.

You can perform seek tuning.

Chapter

Using the radio

Engb

Page 98

Chapter

Using the Digital Radio (DAB)

F77DAB F70DAB F970DAB

F9770DAB

You can listen to the Digital Audio Broadcasting using this product. This section describes operations for Digital Audio Broadcasting.

For improved DAB reception, ensure a DAB aerial with phantom power input (active type) is used. Pioneer recommends using “ANDAB1” or “CA-AN-DAB.001” (active aerial sold separately). Current consumption of DAB aerial should be 100 mA or less.

Digital Radio (DAB) features the following: ! High sound quality (nearly as high as for

CDs, although it may be reduced in some cases in order to allow more services to be broadcast)

! Interference-free reception

Some individual services in an ensemble may be further subdivided into Service Components. The main Service Component is called the Primary Service Component, and all auxiliary Service Components are called Secondary Service Components.

Ensemble

Service 1

Service 2

Service 3

: Primary data : Secondary data

Primary Service Component

Secondary Service Component

Primary Service Component

Data

p If an identical service is in multiple ensem-

bles, the strongest broadcast frequency will automatically be tuned in to.

Using the touch panel keys

12 43

1 Displays the source list.

= For details, refer to Selecting a front

source on the source list on page 21.

2 Selects a band.

= For details, refer to Selecting a band on

page 99.

3 Displays the Time and date setting

screen.

= For details, refer to Setting the time and

date on page 201.

4 Displays the Setting menu screen. 5 Recalls equaliser curves.

= For details, refer to Using the equaliser

on page 181.

6 Selects a channel from the list.

= For details, refer to Selecting a channel

from the list on page 99.

7 Displays the Phone menu screen.

= For details, refer to Displaying the phone

menu on page 76.

8 Enables listening to recent broadcast.

= For details, refer to Listening to a recent

broadcast on page 100.

9 Performs manual tuning or seek tuning.

= For details, refer to Manual tuning on

page 100.

= For details, refer to Seek tuning on page

101.

a Displays the preset channels.

= For details, refer to Selecting a preset

channel from the preset channel list on

page 101.

5 6

Engb

Page 99

Using the Digital Radio (DAB)

Chapter

b Recalls the preset channel stored to a key

from memory with a single touch of the

key.

Stores the current broadcast frequency to

a key for later recall by continuing to

touch the key.

= For details, refer to Storing broadcast fre-

quencies on page 101.

Reading the screen

1 Band indicator

Shows the tuned band: DAB1, DAB2 or DAB3.

2 Current time and date 3 Current broadcast information

! Service Component Label

! Service label

! Ensemble label

p “Station Unavailable” is displayed if

there is no service broadcasting, and “No Signal” is displayed if no signal has been received.

4 Dynamic label display area

p Nothing is displayed if there is no data

provided.

5 Programme type display area

p “PTY:No programme type” is displayed

if the programme type information is not available for the currently tuned station.

p Nothing is displayed if there is no data

provided.

6 Service component number 7 Preset number indicator

Highlights the selected preset item.

3 4 5

Starting procedure

p Configure the aerial power supply setting

according to the DAB aerial to be used beforehand.

= For details, refer to Setting the Digital

Radio aerial power supply on page 156.

1 Display the AV source selection screen.

= For details of the operations, refer to Dis-

playing the AV operation screen on page 20.

2 Touch [Digital Radio] on the AV source selection screen. The “Digital Radio” screen appears.

3 Use the touch panel keys on the screen to control the radio.

= For details, refer to Using the touch panel

keys on page 98.

Selecting a band

% Touch the following key repeatedly until the desired band appears.

Switches between the following bands: DAB1, DAB2 or DAB3.

p This function is convenient for preparing

different preset lists for each band.

Selecting a channel from the list

You can select a channel by searching channel list. p If no channels are registered in the channel

list when the “Digital Radio” is selected as the source, the channels are automatically registered in the list.

p The list will automatically be updated if ser-

vices or service components change or are added in the current ensemble.

Using the Digital Radio (DAB)

Engb

Page 100

Chapter

Using the Digital Radio (DAB)

p If the list is automatically updated while the

list is displayed, the updated information will be displayed the next time the list screen is displayed.

1 Touch the following key.

Displays the list screen.

2 Touch the category you want.

You can select a channel from the following categories.

! Service:

You can select a Service Component from the list of all components.

! Program Type:

You can select a Service Component from PTY information.

p The PTY can be selected are [News/

Info], [Popular], [Classics]or[Others].

! Ensemble:

You can select a Service Component from the relevant ensemble.

3 Touch the item you want.

The channel switches to the selected item.

p If you touch [Update Stations], you can up-

date the channel list.

p The Initial Search Bar may appear on the

right side of the screen depending on the list. If you drag the bar, you can search by alphabet.

231

1 Playback and pause

Touching [d/e] switches between playback and pause.

2 Fast reverse or forward

= For details, refer to Operating the time

bar on page 23.

3 Returns to live broadcast

p The time shift function will automatically

turns off if traffic announcements are received.

Manual tuning

% Touch the following keys to tune manually.

Moves down one step at a time.

Moves up one step at a time.

p This function is convenient for preparing

different preset lists for each band.

Listening to a recent broadcast

You can listen to the Service Component that has been broadcasted (time shift function).

% Touch the following key.

Switches to time shift function mode.

The following screen appears.

100

Engb

Pioneer AVIC F9770 BT, AVIC F970 BT, AVIC F77 DAB, AVIC F9770 DAB, AVIC F970 DAB Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Engb