Philips 24PFS5505, 24PFS5525, 24PFS5535, 24PFS5605, 24PFT5505 User Manual

...

0 (0)

www.philips.com/TVsupport

5000 series

User Manual

24PFS5505

24PFS5525

24PFS5535

24PFS5605

24PFT5505

24PFT5525

32PFS5605

32PHS5505

32PHS5525

32PHT5505

32PHT5525

43PFS5505

43PFS5525

43PFT5505

43PFT5525


1 Get Support		3
1.1 Identify and Register your TV				3
1.2	TV Help and User Manual		3
1.3	On-line Help and User Manual			3
1.4	Consumer Care / Repair		3

2 Software		4
2.1 Update Software				4
2.2 Software Version				4
3 Quick Guide			5
3.1 Remote Control			5
3.2	IR sensor	6
3.3	Joystick - Local Control (if available)				6
4 Setting Up			8
4.1 Read Safety			8
4.2	TV Placement		8
4.3	Turn on TV	10
5 Connections			12
5.1 Connectivity guide				12
5.2	Antenna (4503, 5503, 4304, 4354, 4504, 5304,
5605-32" series TV)			12
5.3	Antenna (5505, 5525, 5535, 5605-24" series TV)
12
5.4	Satellite (if available)			12
5.5	Video Device		13

5.6	Audio Device	16
5.7 Computer		18
5.8	CAM with Smart Card - CI+		19
5.9	USB Device	20

5.10 Wired Network - Freeview (Network port is only for UK models) 21

6 Switch Source			23
6.1	Source List	23
6.2 Rename Device			23
7 Channels		24
7.1 About Channels and Switch Channels					24
7.2	Install Channel		24
7.3	Channel List	29
7.4	Select Channel Filter			30
7.5	Favourite Channels			30
8 TV Guide		33
8.1 What You Need			33
8.2 Using the TV Guide				33

9 Recording and Pause TV (Not applied to

Turkey models)			35
9.1 What You Need			35
9.2	Recording	35
9.3	Pause TV	36

10 Videos, Photos and Music				38
10.1 From a USB Connection			38
10.2	Photos	38
10.3	Videos	38
10.4	Music	39

11 Open TV Setting Menus			40
11.1 Home Menu Overview 40
11.2	Utilities Menu	40
11.3	Quick Settings and All Settings		40
11.4	All Settings	40

12 Environmental			47
12.1 European Energy Label				47
12.2	Product Fiche		47
12.3	End of Use	48

13	Specifications			49
13.1 Power		49
13.2	Reception		49
13.3	Display Resolution			49
13.4 Display Input Resolution					50
13.5	Sound	50
13.6 Multimedia			50
13.7	Connectivity		51

14 Troubleshooting				53
14.1	Tips	53
14.2	Switch On		53
14.3	Remote Control			53
14.4	Channels		53
14.5	Picture	54
14.6 Sound		54
14.7 HDMI		54
14.8 USB		55

15 Safety and Care				56
15.1	Safety	56
15.2	Screen Care		57
15.3	Terms of Use		57


16 Copyrights			59
16.1 HDMI		59
16.2	Dolby Audio		59
16.3	DTS 2.0 + Digital Out ™			59
16.4	Other Trademarks			59

17 Open Source	60
17.1 Open Source Software		60
17.2 Open Source License		60

Index 63

Get Support

1.1

Identify and Register your TV

Identify your TV - TV model number and serial

number

You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.

Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.

Go to www.philips.com/TVsupport

1.2

TV Help and User Manual

Press Settings > Help

In Help menu, you can easily get software updated, reset TV to default settings, and read user manual.

-Update software: Check available software updates.

-User manual: Read the user manual for TV information.

-Troubleshooting: Find a solution for frequent ask questions.

-Factory settings: Reset all settings to factory settings.

-Reinstall TV: Reinstall and redo the complete TV installation.

-Contact info: Show the telephone number or web address for your country or region.

1.3

On-line Help and User

Manual

To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.

Go to www.philips.com/TVsupport.

On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.

For more TV troubleshooting and frequently asked

questions (FAQs)...

to http://philips-tvconsumercare.kxondemand.com/ portal/en/ModelSelect

TV Help on your tablet, smartphone or computer

To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or

computer. Alternatively, you can print the relevant Help page from your computer.

To download the Help (user manual) go to www.philips.com/TVsupport

1.4

Consumer Care / Repair

For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.

Find the telephone number in the printed documentation that came with the TV. Or consult our

website www.philips.com/TVsupport and select your country if needed.

TV model number and serial number

You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.

Warning

Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.

Software

2.1

Update Software

Search for Updates

(Home) > Settings > Update software > Search for updates.

You need a computer and a USB memory device to upload the software on the TV. Use a USB memory device with 256MB free space. Make sure that write protection is switched off.

1. Start the update on TV

- (Home) > Settings > Update software > Search for updates.

2. Identify the TV

- Insert the USB memory into one of the USB connections of the TV.

Select Start and press OK. An identification file is written on the USB memory device.

3. Download the TV software

-Insert the USB memory into your computer.

-On the USB memory device, locate the

file update.htm and double click it.

-Click on Send ID.

-Select your region

-If new software is available, download the .zip file.

After the download, unzip the file and copy the file autorun.upg onto the USB memory device.

4. Update the TV software

- Insert the USB memory into the TV again. The update starts automatically.

The TV switches itself off for 10 seconds and then back on again. Please wait.

Do not . . .

- remove the USB memory device from the TV

If a power cut occurs during the update, never remove the USB memory device from the TV. When the power returns, the update will continue.

Local Updates

For dealers and expert users…

(Home) > Settings > Update software > Local updates.

Look for OAD updates (Over-the-air

Download)

Scan to search for an Over-the-air software update.

(Home) > Settings > Update software > Look for OAD updates.

* The availability of OAD updates is dependent on your country.

2.2

Software Version

To view the current TV software version…

(Home) > Settings > Update software > Current software Info

Quick Guide

3.1

Remote Control

Batteries and Cleaning

Replace batteries

If the TV does not react on a key press on the remote control, the batteries might be empty.

To replace the batteries, open the battery compartment on the back of the remote control.

1.Slide the battery door in the direction shown by the arrow.

2.Replace the old batteries with 2

type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.

1. Standby / On

To switch the TV on or back to Standby.

2. Playback keys

-Play , to playback

-Pause , to pause playback

-Stop , to stop playback

-Rewind , to rewind

-Fast forward , to go fast forward

-Record , to record now

* Turkey models do not support record and pause TV.

3.TV GUIDE

To open or close the TV Guide.

4.FORMAT

To open or close the Picture format menu.

5.SETUP

To open the Settings menu.

3. Reposition the battery door and slide it back until it clicks.

-Remove the batteries if you are not using the remote control for a long time.

-Safely dispose of your old batteries according to the end of use directions.

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.

Key Overview

Top

Top (for Turkey models)

1. Standby / On

To switch the TV on or back to Standby.

2. Playback keys

-Play , to playback

-Pause , to pause playback

-Stop , to stop playback

-Rewind , to rewind

-Fast forward , to go fast forward

3.TV GUIDE

To open or close the TV Guide.

4.Media browser

To open or close the Media browser menu.

5.FORMAT

To open or close the Picture format menu.

6.SETUP

To open the Settings menu.

Middle

1.HOME

To open or close the home menu.

2.SOURCES

To open or close the Sources menu - the list of connected devices.

3.Colour keys

The buttons function follow the on-screen instructions.

4.INFO

To open or close programme infomation.

5. BACK

To switch back to the previous channel you selected. To close a menu without changing a setting.

6.EXIT

To switch back to watching TV.

7.OPTIONS

To open or close the Options menu.

8.OK key

To confirm a selection or setting.

9.Arrow / navigation keys

To navigate up, down, left or right.

10.LIST

To open or close the channel list.

Bottom

1. Mute

To mute the sound or to restore it.

2. Volume

To adjust the volume level.

3. Number keys

To select a TV channel directly.

4. SUBTITLE

To switch subtitles on, off or Automatic.

5. Channel

To switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. To start the next or previous chapter on a disc.

6. TEXT

To open or close Text / Teletext.

3.2

IR sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

Warning

Do not put any objects in front of IR sensor of the TV, it may block the IR signal.

3.3

Joystick - Local Control (if

available)

Joystick - Local Control

If you lost the remote control or its batteries are empty, you can still do some basic TV operations.

To open the basic menu…

1.With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu.

2.Press left or right to

select Volume, Channel or Sources.

Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection.

The menu will disappear automatically.

Setting Up

4.1

Read Safety

Read the safety instructions first before you use the TV.

To read the instructions, in User manual, see chapter Safety and Care.

4.2

TV Placement

Tips on Placement

-Position the TV where light does not shine directly on the screen.

-Position the TV up to 15 cm away from the wall.

-The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

Note:

Please keep the TV away from dust-producing sources such as stoves. It is suggested to clean the dust regularly to avoid getting dust into the TV.

TV Stand

You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.

Use the model number of the TV to look for the Quick Start Guide to download.

Wall Mounting

4304, 4354 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

- 24PHx43x4 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 12 mm)

Preparation

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV.

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

4504, 4503 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

- 32PHx450x - VESA MIS-F 100, M6 (Minimum 12 mm, Maximum 16 mm)

Preparation

Make sure that the metal screws, to mount the TV to

the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

5304 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

- 22PFS5304 - VESA MIS-F 75x75, M4 (Minimum 8 mm, Maximum 8 mm)

Preparation

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

5503 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

- 43PFx5503 - VESA MIS-F 200x100, M6 (Minimum 9 mm, Maximum 11 mm)

Preparation

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Caution

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

5505, 5525, 5535 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

-24PFx55x5 - VESA MIS-F 75x75, M4 (Minimum 8 mm, Maximum 10 mm)

-32PHx55x5 - VESA MIS-F 100, M6 (Minimum 12 mm, Maximum 16 mm)

-43PFx55x5 - VESA MIS-F 200x100, M6 (Minimum 8 mm, Maximum 10 mm)

Preparation

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Note

For 24 inch model, make sure the larger mounting

pad or bracket will not interfere with power connector.

Caution

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

5605 series TV

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

-24PFS5605 - VESA MIS-F 75x75, M4 (Minimum 8 mm, Maximum 10 mm)

-32PFS5605 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm)

Preparation

Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.

Note

For 24 inch model, make sure the larger mounting pad or bracket will not interfere with power connector.

Caution

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

4.3

Turn on TV

Connect Power Cable

-Insert the power cable into the POWER connector on the back of the TV.

-Make sure the power cable is securely inserted in the connector.

-Make sure that the power plug, in the wall socket, is accessible at all times.

-When you unplug the power cable, always pull the plug, never pull the cable.

For 32" or above

For 22"/24"

For 24PFS5535

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

Switch On or Standby

Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.

Switch On

Press the power button (if available) on the side or the back of the TV. Or press on the remote control.

Switch to standby

To switch the TV to Standby, press on the remote control.

To switch off the TV completely, disconnect the power plug.

When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

Connections

5.1

Connectivity guide

Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.

When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.

5.2

Antenna (4503, 5503, 4304,

4354, 4504, 5304, 5605-32"

series TV)

Insert the antenna plug firmly into

the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

For 32" or above

For 22"/24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

5.3

Antenna (5505, 5525, 5535,

5605-24" series TV)

Insert the antenna plug firmly into

the Antenna socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

5.4

Satellite (if available)

Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.

For 32" or above (4503, 4504, 5503, 5605-32" series)

For 22"/24" (4304, 4354,5304 series)

For 24" (5505, 5525, 5535, 5605-24" series)

* Network port is only for UK models

5.5

Video Device

HDMI (4503, 5503, 4304, 4354, 4504,

5304, 5605-32" series TV)

For best signal quality transfer, use a High speed

HDMI cable and do not use an HDMI cable longer

than 5 m.

For 32" or above (5505, 5525 series)

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

Copy protection

HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Bluray Disc. Also referred to as DRM (Digital Rights Management).

HDMI (5505, 5525, 5535, 5605-24"

series TV)

For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

For 32" or above

For 24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

Copy protection

HDMI - DVI (4304, 4354, 5304,

5605-32" series TV)

If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

For 22"/24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

HDMI - DVI (5505, 5525, 5535,

5605-24" series TV)

If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

For 24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

HDMI-CEC Connection - EasyLink

Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote

control. EasyLink HDMI CEC must be switched on on the TV and the connected device.

Switch on EasyLink

(Home) > Settings > General settings > EasyLink > EasyLink > On

Operate HDMI CEC-compatible devices with TV remote control

(Home) > Settings > General settings > EasyLink > EasyLink remote control > On

Note:

-EasyLink might not work with devices from other brands.

-The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners.

SCART (if available)

SCART is a good quality connection.

The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals. The SCART connection also supports NTSC playback.

For 4503, 5503, 4304, 4354, 4504, 5304, 5605-32" series TV

Digital Audio Out (4503, 5503, 4304,

4354, 4504, 5304, 5605-32" series

TV)

Audio Out - Optical is a high quality sound connection.

This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

5.6

Audio Device

HDMI ARC

Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel).

If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it

to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.

Digital Audio Out (5505, 5525, 5535,

5605-24" series TV)

Audio Out - Optical is a high quality sound connection.

For 32" or above

Philips 24PFS5505, 24PFS5525, 24PFS5535, 24PFS5605, 24PFT5505 User Manual

For 24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

Headphones (4503, 5503, 4304,

4354, 4504, 5304, 5605-32" series

TV)

You can connect a set of headphones to the connection on the side of the TV. The

connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.

Headphones (5505, 5525, 5535,

5605-24" series TV)

You can connect a set of headphones to the connection on the side of the TV. The

connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.

For 32" or above

For 24"

* Network port is only for UK models

** Satellite port is only for xxPxSxxxx series

5.7

Computer

HDMI - DVI (4304, 4354, 5304,

5605-32" series TV)

If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

For 22"/24"

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

HDMI - DVI (5505, 5525, 5535,

5605-24" series TV)

If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.

Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

For 24"

VGA (if available)

Use a VGA cable if your device only has a VGA connection. Use VGA connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

For 22"/24" (4304, 4354,5304 series)

For 24" (5505, 5525, 5535, 5605-24" series)

*Network port is only for UK models

**Satellite port is only for xxPxSxxxx series

Ideal Settings

(Home) >	Settings > Picture >
Advanced >	Computer

Set to On to have the ideal picture setting for use your TV as a computer monitor.

* Only available for HDMI and VGA sources.

5.8

CAM with Smart Card - CI+

About CI+

This TV is ready for the CI+ Conditional Access.

With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module.

Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Contact a digital TV operator for more information on terms & conditions.

Smart Card

Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.

Insert the smart card into the CAM module. See the instruction you received from the operator.

To insert the CAM in the TV…

1.Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.

2.While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE.

3.Push the CAM in as far as it will go. Leave it in the slot permanently.

When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card.

The CAM and smart card are exclusively for your TV. If you remove the CAM, you will no longer be able to watch the scrambled channels supported by the CAM.

For 4503, 5503, 4304, 4354, 4504, 5304, 5605-32" series TV

For 5505, 5525, 5535, 5605-24" series TV

Watch Channel on Smart Card

You can watch channels which are installed from CI/CAM cards.

1.While watching a TV channel, press LIST to open the channel list.

2.Select: CI+ Channel list .

Set Passwords and PIN Codes

For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV.

To set the PIN code for the CAM…

(Home) > Settings > Child lock > CAM PIN

5.9

USB Device

USB Flash Drive

You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in the USB connection on the TV while the TV is switched on.

The TV detects the flash drive and opens a list showing its content.

If the contents list does not appear automatically, press SOURCES and select USB.

For 4503, 5503, 4304, 4354, 4504, 5304, 5605-32" series TV

For 5505, 5525, 5535, 5605-24" series TV

USB Hard Drive

If you connect a USB Hard Drive, you can pause or record digital TV broadcasts (DVB broadcasts or similar).

Minimum Disk Space

-To pause a broadcast, you need a USB compatible Hard Drive with a minimum of 4GB disk space.

-To pause and record a broadcast, you need a minimum of 32GB disk space.

Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.

* Turkey models do not support record and pause TV.

For 4503, 5503, 4304, 4354, 4504, 5304, 5605-32" series TV

For 5505, 5525, 5535, 5605-24" series TV

+ 45 hidden pages

Philips 24PFS5505, 24PFS5525, 24PFS5535, 24PFS5605, 24PFT5505 User Manual

Contents