PANJIT GBP308, GBP306, GBP304, GBP302, GBP3010 Datasheet

DATA SHEET

GBP300~GBP3010

IN-LINEGLASSPASSIVATEDSINGLE-PHASEBRIDGERECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes

FEATURES

•Plastic material has Underwriters Laboratory Flammability Classification 94V-O

•Ideal for printed circuit board

•Reliable low cost construction utilizing molded plastic technique

•Surge overload rating : 70 Amperes peak

MECHANICALDATA

Terminals: Leads solderable per MIL-STD-202,

Method 208

Mounting position: Any

Weight: 0.06 ounce, 1.7 grams

MAXIMUMRATINGSANDELECTRICALCHARACTERISTICS

																GBP												Unit: inch ( mm )
								.581(14.75)																												.144(3.65)
C .111 (2.8)							.561(14.25)																			.044(1.10)										.131(3.35)
																									.031(0.80)
)		)
10.50		10.10
(		(
.414		.397
																									.057(1.45)
14.65		14.15		)		)																			.045(1.15)
				(		(
)		)		2.5		2.1
.577		.557		.099		.082
(		(
																									.034(0.86)
																									.026(0.66)
																																	.026(0.65)
			.160(4.06)																						.160(4.06)			.013(0.35)
		.140(3.56)																							.140(3.56)
													.160(4.06)
					.140(3.56)

Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.

For Capacitive load derate current by 20%.

				GBP300	GBP301	GBP302		GBP304		GBP306	GBP308	GBP3010	UNIT
		Maximum Recurrent Peak Reverse Voltage		50	100	200		400		600	800	1000	V
		Maximum RMS Input Voltage		35	70	140		280		420	560	700	V
		Maximum DC Blocking Voltage		50	100	200		400		600	800	1000	V
		Maximum Average Rectified Output Current at 50°C Ambient.					3.0						A
		Peak One Cycle Surge Overload Current					70.0						A
		Maximum Instantaneous Forward Voltage Drop per Bridge					1.0						V
		element at 1.5A dc
		Maximum ( Total Bridge) Reverse Leakage at rated TA=25°					5.0						µA
		CDc Blocking Voltage per element	TA=100°C				500
		I2t Rating for fusing ( t<8.35ms)					20.0						A2S
		Typical junction capacitance per leg (Note 1)					25.0						pF
		Typical Thermal Resistance per leg (Note 2) Rθ JA					34.0						°C / W
			Rθ JL				15.0
		Operating Temperature Range, TJ					-55 to +125						°C
		Storage Temperature Range,TSTG					-55 to +150						°C

NOTES:

1.Measured at 1.0MHZ and applied reverse voltage of 4.0 volts

2.Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B with 0.47 x 0.47"(12 x 12mm)copper pads.

DATE : SEP.10.2002

PAGE . 1