PANJIT PG4933, PG4934, PG4935, PG4936, PG4937 Datasheet

PG4933 THRU PG4937

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 600 Volts	CURRENT - 1.0 Ampere
FEATURES
• High surge current capability	DO-41

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound

•1.0 ampere operation at TA=55 ¢J with no thermal runaway

•Fast switching for high efficiency

•Exceeds environmental standards of MIL-S-19500/228

•Glass passivated junction in DO-41 package

MECHANICAL DATA

Case: Molded plastic, DO-41

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Band denotes cathode

Mounting Position: Any

Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PG4933	PG4934	PG4935	PG4936	PG4937	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	400	600	V
Maximum RMS Voltage	35	70	140	280	420	V
Maximum DC Blocking Voltage	50	100	200	400	600	V
Maximum Average Forward Rectified			1.0			A
Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine			30			A
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A			1.2			V
Maximum Reverse Current Ta=25 ¢J			5.0			£g A
at Rated DC Blocking Voltage Ta=100 ¢J			150			£g A
Typical Junction capacitance (Note 1) CJ			12			PF
Typical Thermal Resistance (Note 3) R £KJA			67			¢J /W
Maximum Reverse Recovery Time(Note 2)			200			ns
Operating and Storage Temperature Range			-55 to +150			¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A

3.Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted