PANJIT PS1010R, PS101R, PS102R, PS104R, PS106R Datasheet

		PS100R THRU PS1010R
		FAST SWITCHING PLASTIC DIODES
		VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
	FEATURES		DO-41
	•	High current capability
	• Plastic package has Underwriters Laboratory
		Flammability Classification 94V-O Utilizing
		Flame Retardant Epoxy Molding Compound
	•	1.0 ampere operation at TA=55 ¢J with no thermal runaway
	• Fast switching for high efficiency
	• Exceeds environmental standards of MIL-S-19500/228
	•	Low leakage

MECHANICAL DATA

Case: Molded plastic, DO-41

Terminals: Plated axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PS100R	PS101R	PS102R		PS104R	PS106R	PS108R	PS1010R	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200		400	600	800	1000	V
Maximum RMS Voltage	35	70	140		280	420	560	700	V
Maximum DC Blocking Voltage	50	100	200		400	600	800	1000	V
Maximum Average Forward Rectified				1.0					A
Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine				30					A
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A DC				1.3					V
Maximum Reverse Current TJ=25 ¢J				5.0					£g A
at Rated DC Blocking Voltage TJ=100 ¢J				500					£g A
Typical Junction capacitance (Note 1) CJ				12					PF
Typical Thermal Resistance (Note 3) R £KJA				41					¢J /W
Maximum Reverse Recovery Time(Note 2)	150	150	150		150	250	500	500	ns
Operating and Storage Temperature Range TJ,TSTG				-55 to +150					¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A

3.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B. mounted