PANJIT PS2010R, PS201R, PS202R, PS204R, PS206R Datasheet

PS200R THRU PS2010R

FAST SWITCHING PLASTIC RECTIFIER

VOLTAGE - 50 to 1000 Volts	CURRENT - 2.0 Amperes
FEATURES
• High current capability	DO-15
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound

•2.0 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Fast switching for high efficiency

•Low leakage

MECHANICAL DATA

Case: Molded plastic , DO-15

Terminals: Phated axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PS200R	PS201R	PS202R		PS204R	PS206R		PS208R	PS2010R	UNITS
Peak Reverse Voltage, Repetitive; VRM:	50	100	200		400		600	800	1000	V
Maximum RMS Voltage	35	70	140		280		420	560	700	V
Maximum DC Blocking Voltage	50	100	200		400		600	800	1000	V
Maximum Average Forward Rectified				2.0						A
Current .375"(9.5mm) Lead Length at
TA=55 ¢J
Peak Forward Surge Current, IFM(surge)				70.0						A
8.3msec. single half sine-wave
superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 2.0A DC				1.3						V
Maximum Reverse Current TJ=25 ¢J				5.0						£g A
at Rated DC Blocking Voltage TJ=100 ¢J				500						£g A
Typical Junction capacitance (Note 1) CJ				35						PF
Typical Thermal Resistance (Note 3) R £KJA				22						¢J /W
Maximum Reverse Recovery Time(Note 2)	150	150	150		150		250	500	500	ns
Operating and Storage Temperature Range				-55 TO +150						¢J
TJ,TSTG
NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A

3.Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B. mounted.