PANJIT PG5408, PG5400, PG5401, PG5402, PG5404 Datasheet

PG5400 THRU PG5408

GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes

FEATURES

•Plastic package has Underwriters Laboratory

DO-201AD

Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•Glass passivated junction in DO-201AD package

•3.0 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Low reverse leakage current

MECHANICAL DATA

Case: Molded plastic

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Mounting Position: Any

Weight: 0.04 ounce, 1.1 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PG5400	PG5401	PG5402		PG5404		PG5406	PG5407	PG5408	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200		400		600	800	1000	V
Maximum RMS Voltage	35	70	140		280		420	560	700	V
Maximum DC Blocking Voltage	50	100	200		400		600	800	1000	V
Maximum Average Forward Rectified				3.0						A
Current .375"(9.5mm) lead length
at TA=55 ¢J
Peak Forward Surge Current, 8.3ms single				150						A
half sine-wave superimposed
on rated load(JEDEC method)
Maximum Forward Voltage at 3.0A				1.2						V
Maximum Reverse Current at Ta=25 ¢J				5.0						£g A
At Rated DC Blocking Voltage Ta=100 ¢J				100						£g A
Typical Junction capacitance (Note 1)				30						PF
Typical Thermal Resistance R £KJA(Note 2)				20						¢J /W
Typical Reverse Recovery Time(Note 3)				2						£g S
Operating and Storage Temperature Range				-55 to +150						¢J
TA

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length P.C.B mounted

3.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=2.5A