PG5391 THRU PG5399
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTIC
PG5391PG5392PG5393PG5394PG5395PG5396PG5397PG5398PG5399UNITS
Maximum Recurrent Peak Reverse Voltag
Peak Forward Surge Current, 8.3mssingle half sine-wave superimposedon rated load(JEDEC method
¢JRated DC Blocking Voltage
Typical Thermal Resistance
Operating and Storage Temperature Range
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
l
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l
Glass passivated junction in DO-15 package
l 1.5 ampere operation at TA=55 ¢J with no thermal runaway
l
Exceeds environmental standards of MIL-S-19500/228
Case: Molded plastic, DO-15
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
Ratings at 25¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
50 100 200 300 400 500 600 800 1000
Maximum RMS Voltage 35 70 140 210 280 350 420 560 700
Maximum DC Blocking Voltage 50 100 200 300 400 500 600 800 1000
Maximum Average Forward Rectified
1.5
Current .375"(9.5mm) lead length
at TA=55
¢J
50
Maximum Forward Voltage at 1.5A 1.4
5.0
¢J
50
Typical Junction capacitance (Note 1) 25
45.0
-55 to +150
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length P.C.B
mounted
A
V
£g
£g
A
¢J
¢J