PANJIT PG150, PG151, PG1510, PG152, PG154 Datasheet

PG150 THRU PG1510

GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER

VOLTAGE - 50 to 1000 Volts	CURRENT - 1.5 Amperes
FEATURES	DO-15

• Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•1.5 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Glass passivated junction

MECHANICAL DATA

Case: Molded plastic , DO-15

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	PG150	PG151	PG152	PG154	PG156	PG158	PG1510	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	400	600	800	1000	V
Maximum RMS Voltage	35	70	140	280	420	560	700	V
Maximum DC Blocking Voltage	50	100	200	400	600	800	1000	V
Maximum Average Forward Rectified				1.5				A
Current .375"(9.5mm) Lead Length at
TA=55 ¢J
Peak Forward Surge Current 8.3ms single				50				A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A				1.1				V
Maximum Reverse Current Ta=25 ¢J				5.0				£g A
at Rated DC Blocking Voltage Ta=100 ¢J				50				£g A
Typical Junction capacitance (Note 1)				25				PF
Typical Thermal Resistance (Note 2) R £KJA				45.0				¢J /W
Operating and Storage Temperature Range			-55 TO +150					¢J
TA

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2.Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted.