PG4001S THRU PG4007S
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTIC
Peak Forward Surge Current, I
(surge):8.3ms single half sine-wave superimposedon rated load(JEDEC method
Maximum DC Reverse Current at TA=25¢JAt Rated DC Blocking Voltage
Typical Junction capacitance (Note 1)
Typical Thermal Resistance
Operating and Storage Temperature Range
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 A mpere
l
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l
Glass passivated junction version of PG4001S thru
PG4007S in A-405 package
l
1 ampere operation at TA=75¢Jwith no thermal runaway
l
Exceeds environmental standards of MIL-S-19500/228
Case: Molded plastic, JEDEC A-405
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
Ratings at 25¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
PG4001S PG4002S PG4003S PG4004S PG4005S PG4006S PG4007S UNITS
Maximum Recurrent Peak Reverse
50 100 200 400 600 800 1000
Voltage
Maximum RMS Voltage 35 70 140 280 420 560 700
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000
Maximum Forward Voltage at 1.0A 1.1
Maximum Average Forward Rectified
Current .375" lead length at TA=75
¢J
1.0
30
Maximum Full Load Reverse Current,
Full Cycle Average at TA=75
¢J
30
5.0
50
15
50
-55 to +150
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal Resistance Junction to Ambient
* JEDEC Registered Value
V
A
A
£g
£g
F
¢J
¢J