PANJIT PG4001, PG4002, PG4003, PG4004, PG4005 Datasheet

PG4001 THRU PG4007

GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER

VOLTAGE - 50 to 1000 Volts	CURRENT - 1.0 Ampere
FEATURES	DO-41

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•Glass passivated junction version of PG4001 thru PG4007

in DO-41 package

•1 ampere operation at TA=75 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA

Case: Molded plastic, JEDEC DO-41

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color Band denotes cathode

Mounting Position: Any

Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.

	PG4001	PG4002	PG4003		PG4004		PG4005	PG4006	PG4007	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200		400		600	800	1000	V
Maximum RMS Voltage	35	70	140		280		420	560	700	V
Maximum DC Blocking Voltage	50	100	200		400		600	800	1000	V
Maximum Forward Voltage at 1.0A				1.1						V
Maximum Average Forward Rectified				1.0						A
Current .375" lead length at TA=75 ¢J
Peak Forward Surge Current, IFM (surge):				30						A
8.3ms single half sine-wave superimposed
on rated load(JEDEC method)
Maximum Full Load Reverse Current,				30						£g A
Full Cycle Average at TA=75 ¢J
Maximum DC Reverse Current at TA=25 ¢J				5.0						£g A
At Rated DC Blocking Voltage TA=100 ¢J				50						£g A
Typical Junction capacitance (Note 1)				15						PF
Typical Thermal Resistance R £KJA(Note 2)				50						¢J /W
Operating and Storage Temperature Range				-55 to +150						¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal Resistance Junction to Ambient

* JEDEC Registered Value