PANJIT PG300R, PG301R, PG302R, PG304R, PG306R Datasheet

PG300R THRU PG308R

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 800 Volts	CURRENT - 3.0 Amperes
FEATURES	DO-201AD

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound

•Glass passivated junction in a DO-201AD package

•3 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Fast switching for high efficiency

MECHANICAL DATA

Case: Molded plastic, DO-201AD

Terminals: axial leads, solderable per MIL-STD-202,

Method 208

Mounting Position: Any

Weight: 0.04 ounce, 1.1 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

		PG300R	PG301R	PG302R		PG304R	PG306R	PG308R	UNITS
Maximum Recurrent Peak Reverse Voltage		50	100	200		400	600	800	V
Maximum RMS Voltage		35	70	140		280	420	560	V
Maximum DC Blocking Voltage		50	100	200		400	600	800	V
Maximum Average Forward Rectified Current .375”,					3.0				A
9.5mm Lead Length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine					125				A
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 3.0A					1.3				V
Maximum Reverse Current at Rated DC Ta=25 ¢J					5.0				£g A
Blocking Voltage	Ta=100 ¢J				300
Typical Junction capacitance (Note 1) CJ					60				PF
Typical Thermal Resistance (Note 2) R £KJA					22.0				¢J /W
Maximum Reverse Recovery Time(Note 3)		150	150	150		150	250	500	ns
Operating and Storage Temperature Range TA				-55 to +150					¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted

3.Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A