Nokia 3500 classic, RM-272, RM-273 Service

0 (0)

 

Page

(14)

Approved 1.0

CMO Operations & Logistics

 

 

MGR

Training and Vendor Development

 

 

13.Sep.2007

Multimedia Creation & Support

CONFIDENTIAL

SERVICE MANUAL

Level 1&2

RM-272

RM-273

Transceiver characteristics:

Band:

-RM-272: Tri-band EDGE phone for EGSM 900/1800/1900MHz -RM-273: Tri-band EDGE phone for EGSM 850/1800/1900MHz

Camera: 2.0 Megapixel, 8x digital zoom

Display: Active TFT color display with 262.144 colors, resolution 128 x 160 pixel

Operating System: Series 40

Bluetooth

FM stereo radio Memory card: microSD

Connector: mini USB Connector, AV Connector

Transceiver with BL-4c Li-Ion battery pack

Talk time

Standby

Note

 

 

 

up to 3.5h

up to 14.5days

Depends on network

parameters

 

 

 

 

 

Environmental characteristics:

• Lead-free soldered

3500c RM-272/RM-273

Copyright © 2007 NOKIA Corporation. All rights reserved.

 

 

Page

(14)

Approved 1.0

CMO Operations & Logistics

 

 

MGR

Training and Vendor Development

 

 

13.Sep.2007

Multimedia Creation & Support

CONFIDENTIAL

TABLE OF CONTENTS

 

 

Page

1.

INTRODUCTION

 

 

3

2.

EXPLODED VIEW

 

 

4

3.

LEVEL 2 SOLDER COMPONENTS

 

 

5

4.

SERVICE DEVICES

 

 

6

5.

SW-UPDATE

 

 

8

6.

DISASSEMBLY INSTRUCTION

 

 

9

7.

ASSEMBLY HINTS

 

 

13

 

 

 

CHANGE HISTORY

 

 

 

 

Status

Version No.

Date

Comments

Draft

0.1

07.Sep.2007

Initial draft

 

 

 

 

Approved

1.0

13.Sep.2007

Approval

 

 

 

 

 

 

 

 

3500c RM-272/RM-273

Copyright © 2007 NOKIA Corporation. All rights reserved.

 

Page

(14)

Approved 1.0

CMO Operations & Logistics

 

 

MGR

Training and Vendor Development

 

 

13.Sep.2007

Multimedia Creation & Support

CONFIDENTIAL

1. INTRODUCTION

The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service suppliers, follow these regularly and comply with the given instructions.

While every endeavor has been made to ensure the accuracy of this document, some errors may exist. If you find any errors or if you have further suggestions, please notify NOKIA using the address below:

mailto:cc-ts-rc.documentation@nokia.com

Please keep in mind also that this documentation is continuously being updated and modified, so watch always out for the newest version.

Warnings and Cautions

Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following:

Warnings:

1.CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY.

2.THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES, EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.

3.OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.

Cautions:

1.Servicing and alignment must be undertaken by qualified personnel only.

2.Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn.

3.Use only approved components as specified in the parts list.

4.Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment.

5.Ensure all cables and wires are repositioned correctly.

Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore every Service Supplier has to take care of all precautions, which are mentioned in the service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD Protection Requirements in this Service Manual.

3500c RM-272/RM-273

Copyright © 2007 NOKIA Corporation. All rights reserved.

Nokia 3500 classic, RM-272, RM-273 Service

 

Page

(14)

Approved 1.0

CMO Operations & Logistics

 

 

MGR

Training and Vendor Development

 

 

13.Sep.2007

Multimedia Creation & Support

CONFIDENTIAL

2. EXPLODED VIEW

See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL.

3500c RM-272/RM-273

Copyright © 2007 NOKIA Corporation. All rights reserved.

 

Page

(14)

Approved 1.0

CMO Operations & Logistics

 

 

MGR

Training and Vendor Development

 

 

13.Sep.2007

Multimedia Creation & Support

CONFIDENTIAL

3. LEVEL 2 SOLDER COMPONENTS

3500c RM-272/RM-273

Copyright © 2007 NOKIA Corporation. All rights reserved.

Loading...
+ 9 hidden pages