WNCE2001_IG.fm Page 1 Friday, April 9, 2010 3:14 PM
Universal WiFi Internet Adapter (WNCE2001)
What is WPS? WPS (WiFi Protected Setup) is a simple and secured way to connect a device to an existing network.
If you have a NETGEAR router, this feature is called Push ‘N’ Connect. Look for the or 
symbols on the router to make sure the NETGEAR router supports WPS. For non-NETGEAR routers, please refer to the user manual to determine if the router supports WPS. Once you know whether your router supports WPS, choose the appropriate installation method below.
Package Contents
Power adapter
WNCE2001
Ethernet cable |
USB power |
|
cable |
||
|
Top and Back Views
|
|
|
|
Reset |
|
|
|
Power |
|
|
|
|
|
|
|
||
Power |
|
|
WLAN |
WPS |
Ethernet |
|||
LED |
|
|
button |
button |
|
|||
LAN |
Port |
|
||||||
|
LED |
|
|
|
|
|||
|
LED |
|
|
|
|
|
|
|
Installation with WPS
Step 1: Connect the WNCE2001 to your TV, XBox, or Blu-ray player using the Ethernet cable (included) and one of the power connection
options. For more information on power-up methods,
see “Power Connection Options” on the reverse side.
Step 2: Push the WPS button on the WNCE2001. The WLAN LED will blink amber and green, showing that the WPS is running.
Step 3: Push the WPS button on your router. The WLAN LED on the WNCE2001 will stay green for
5 seconds when the wireless connection has been established.
Step 4: Congratulations! Your installation is complete. |
WPS |
button |
Installation without WPS
Step 1: Please disconnect any wireless connection to the router and/or remove the Ethernet cable currently connected to the computer. You may restore the connection after the WNCE2001 installation is complete.
Step 2: Connect the WNCE2001 to your computer, using the Ethernet cable (included) and one of the power connection options. For more information on power-up methods,
see “Power Connection Options” on the reverse side.
Step 3: Open your Internet browser and it will automatically take you to the setup page. Follow the instructions on the setup page,
then return to this guide and continue to Step 4.
Step 4: Disconnect the Ethernet and USB cables from your computer.
Step 5: Connect the WNCE2001 to your TV, Box, or Blu-ray player. If your device doesn’t have a USB port, see
“Power Connection Options” on the reverse side.
Step 6: Congratulations! Your installation is complete.
Loading...