Metabo BE 710, BDE 1100, BE 4010, BE 1020, BE 4006 BROCHURE

DRILLS

ENGINEERING

RESULTS FOR

INDUSTRIAL

NEEDS.

The Metabo rotary drill range is designed and built to meet the needs of the industrial world. Be it for applications in wood, metal, plastic, liquids, ceramic or masonry Metabo has a drill in the range to suit. This versatility results from the use of quality components, high manufacturing tolerances and high quality standards throughout the manufacturing process. With a Metabo you can be sure it will deliver engineering results demanded by industry. Metabo. Work. Don’t play.

92 |

DRILLS

| 93

DRILLS

ROTARY ONLY – FOR THE SPECIALIST.

Rotary only drills are usually considered as specialist machines, however Metabo‘s vast range can cover a whole host of applications. This class are in their element for high tolerance drilling in wood, plastic and metal. Small high speed models come into their own for those

repetitive small jobs where as high torque models are ideal for use with diamond cores, torque screws, augers and paddles etc. Whatever the application, with Metabo you will always find the right machine for the job.

Infinitely variable speed control

For setting the ideal speed without problems.

Marathon motor with coil guard

Expertly machined and balanced motors use high grade coppers and steels, increase efficiency and provide optimum performance. Thick resin coatings on the armature and field coil protect the motor from harmful debris, increasing service life.

Metabo S-automatic torque limiting clutch

Prevents sudden reverse kick back if a disc or bit should jam in the work piece - protecting machine and user.

Die cast aluminium gear housing

Metal gear housings ensure optimum integral machine strength and maximum heat dissipation which aids motor cooling and prolongs service life.

Hexagon socket in the spindle

The screwdriver bit can be inserted directly into the spindle.

Metabo quick-action

keyless chuck

Simple and fast tool

change without key.

Special areas of application	Special areas of application	Ergonomic design
Even when working at places difficult	Drills with high torque are not only	Ideal adaptation of the design
to reach, Metabo drills can be used	suitable simply for drilling, but can	to the user’s needs that enables safe,
without problems.	also be used for stirring thick fluids	comfortable and fatigue-free work.
	such as gypsum, joint fillers, ready-
	made plaster or tile adhesive.

94 |

DRILLS

Which drill for which application?

	Drilling	Inserting screws, stirring			Type and output	Page
	Pilot drilling of riveted joints, aluminium and				BE 4006	96
	thin sheet metal, pilot drilling of wood,				400 Watts
	kitchen installation
	Nail holes in strips
	Wood – small diameter	Light screwing applications			BE 4010	96
	Vehicle body manufacture				400 Watts
	Steel and cast iron
	Inox profiles, pipes and sheets
	Wood – smaller diameter				B 561	96
			NEW
	Vehicle body manufacture				560 Watts
	Steel and cast iron
	Sheet metal, switch cabinet manufacture
	Wood – smaller diameter	Light screwing applications			BE 561	96
			NEW
	Vehicle body manufacture				560 Watts
	Steel and cast iron
	Sheet metal, switch cabinet manufacture
	Drilling of stainless steel installations	Screwing applications			BE 622 S-R+L	97
	(counter construction)	Stirring of paint (painters)			620 Watts
	Drilling with auger bits and forstner pattern bits	Stirring of viscous fluids
	Steel (mechanical engineering,	Screwing applications			BE 710	97
	scaffolding manufacture, locks)	Stirring of paint			710 Watts
	Wood (carpenters, joiners, interior decorators)
	Ceramic, tiles (building services, plumbers)	Screwing applications			BE 1020	97
	Application with drill stand	Stirring of paint			1.020 Watts
	Service and assembly applications	Application as driving unit
	Steel – large diameter	Stirring of paint			BDE 1100	98
	Wood – extremely large diameter	Stirring of viscous fluids			1.100 Watts
		Diamond Core drilling
	Kitchen installation				WBE 700	98
	Mechanical engineering				705 Watts
	Assembly work (furniture, locksmiths, fitters)
		Stirring of viscous fluids:			RWE 1100	99
		Gypsum, filler compound, tile adhesive, joint filler,			1.100 Watts
		mortar, ready-made plaster (painters, plasterers,
		bricklayers)
	Steel – large diameter	Screws (long screws with large drilling			B 32/3	100
			NEW
	Wood –large diameter	diameter, e.g. frames and facade pegs)			1.800 Watts
	Form work drill bit	Stirring of viscous fluids
	Drilling and hollow milling in steel substructures				MAG 832	101
	(mechanical engineering)				800 Watts
	Drilling of steel carriers
	Stationary drilling in wood, wood-like				TB E 4512	102
	materials, plastic and metal				700 Watts
					TB E 5014
					800 Watts

METAL PROCESORS ANGLE GRINDERS

HAMMERS

IMPACT DRILLS

DRILLS

WOOD SANDING MACHINES SCREWDRIVERS

ROUTERS AND PLANERS

| 95

DRILLS

COMMON FEATURES

COMMON FEATURES

Compact, lightweight machine with special cup housing design

Small, handy bench machine

Ergonomic housing design with large trigger button User-friendly guidance of machine exhaust in all working situations

Variospeed (V) electronics Long-life motor

Clockwise and anticlockwise rotation Quick-action keyless chuck Futuro Plus

Spindle with hexagon recess for screwdriver bits

Small, handy bench machine Sturdy double-shell housing

Ergonomic housing design with large trigger button Long-life motor

Spindle with hexagon recess for screwdriver bits Rubber-coated handle

	BE 4006		BE 4010
		400 Watt		400 Watt
		Electronic		Electronic
			Drill	Drill
		BE 4006		BE 4010

	B 561		BE 561
	NEW		NEW
			560 Watt	560 Watt
			Drill	Electronic
			B 561	Drill
				BE 561

Comparative
device characteristics
Torque	6 Nm	8 Nm
Drilling capacity in
- Steel	6 mm	10 mm
- Softwood	12 mm	20 mm
No load speed	0 - 4.000 /min	0 - 2.850 /min
Rated input power	400 W	400 W
Output power	220 W	220 W
Rated load speed	2.400 /min	1.800 /min
Collar diameter
Drilling spindle thread	1/2" - 20 UNF	1/2" - 20 UNF
Chuck capacity	1 - 10 mm	1 - 10 mm
Drilling spindle with hexagon	1/4" (6,35 mm)	1/4" (6,35 mm)
recess
Weight (without mains cable)	1,2 kg	1,2 kg
Standard equipment	Quick-action	Quick-action
	keyless chuck	keyless chuck
	Futuro Plus	Futuro Plus
Type	BE 4006	BE 4010
Order no.	6.00554	6.00555

Special advantages
Variospeed (V) electronics
Thumbwheel for
preselection of speed
Clockwise and
anticlockwise rotation
Comparative
device characteristics
Torque	5 Nm	5 Nm
Drilling capacity in
- Steel	10 mm	10 mm
- Softwood	20 mm	20 mm
No load speed	2.800 /min	0 - 2.800 /min
Rated input power	560 W	560 W
Output power	320 W	320 W
Rated load speed	1.700 /min	1.700 /min
Collar diameter	43 mm	43 mm
Drilling spindle thread	1/2" - 20 UNF	1/2" - 20 UNF
Chuck capacity	1 - 10 mm	1 - 10 mm
Drilling spindle with hexagon		1/4" (6,35 mm)
recess
Weight (without mains cable)	1,7 kg	1,7 kg
Type	B 561	BE 561
Order no. Machine with	–	6.01162.82
– Quick-action keyless chuck Futuro Plus
– Geared chuck and chuck key	6.01161	6.01162.00

96 |

DRILLS

EQUIPMENT FEATURES

COMMON FEATURES

Die cast aluminium gear housing Variospeed (V) electronics

Metabo S-automatic torque limiting clutch Clockwise and anticlockwise rotation Geared chuck

Spindle with hexagon recess for screwdriver bits Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits) and for stirring thick liquid-like materials

High torque

Long side handle for work with high torque Auto-stop carbon brushes

Die cast aluminium gear housing Optimal cooling by axial/radial fan

Ergonomic housing design with large trigger button Thumbwheel for preselection of speed

Two-speed gear unit

Robust Metabo Marathon motor

Metabo S-automatic torque limiting clutch Metabo winding protection grid Clockwise and anticlockwise rotation

Spindle with hexagon recess for screwdriver bits Auto-stop carbon brushes

	B E 622 S- R+L				BE 710		BE 1020
		620 Watt				710 Watt		1020 Watt
		Electronic Drill				Electronic		Electronic
		B E 622 S- R+L				Two-Speed		Two-Speed
							Drill		Drill
						BE 710		BE 1020

METAL PROCESORS ANGLE GRINDERS

HAMMERS

IMPACT DRILLS

Comparative device characteristics			Special advantages
Torque	35 Nm		Variospeed (V) electronics				DRILLS
Drilling capacity in			Vario Tacho Constamatic
- Steel	16 mm		(VTC) full-wave electronics
- Softwood	40 mm		High torque
No load speed	0 - 550 /min		Overload protection
Rated input power	620 W		No-volt release switch
Output power	360 W		Brush wear indicator
Rated load speed	330 /min
Collar diameter	43 mm		Comparative	0 - 1.000 /	0 - 900 /		SCREWDRIVERS
Drilling spindle thread	1/2" - 20 UNF		No load speed
			device characteristics
Chuck capacity	1,5 - 13 mm		Torque	16 Nm/6 Nm	28 Nm/10 Nm
Drilling spindle with hexagon	1/4" (6,35 mm)		Drilling capacity in
recess			- Steel	13 mm/8 mm	16 mm/8 mm
Weight (without mains cable)	2,1 kg		- Softwood	40 mm/25 mm	40 mm/25 mm
Standard equipment	Geared chuck, chuck key,			0 - 3.000 /min	0 - 2.600 /min
	long side handle		Rated input power	710 W	1.020 W
			Output power	420 W	620 W
			Rated load speed	560/1.700 /min	900/2.600 /min	SANDINGWOOD	MACHINES
			Weight (without mains cable)	2,2 kg	2,3 kg
			Collar diameter	43 mm	43 mm
			Drilling spindle thread	1/2" - 20 UNF	1/2" - 20 UNF
			Chuck capacity	1,5 - 13 mm	1,5 - 13 mm
			Drilling spindle with hexagon	1/4"	1/4"
			recess	(6,35 mm)	(6,35 mm)
			Standard equipment	Side handle	Long side
					handle
						ROUTERS	ANDPLANERS
Order no.	6.00626		Order no. Machine with	BE 710	BE 1020
Type	B E 622 S- R+L		Type
			– Quick-action keyless chuck Futuro Plus	6.00830.91	–
			– Geared chuck and chuck key	6.00830.00	6.00831.00

| 97

DRILLS

EQUIPMENT FEATURES

Die cast aluminium gear housing Variospeed (V) electronics Two-speed gear unit

Metabo S-automatic torque limiting clutch Clockwise and anticlockwise rotation Geared chuck

Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits) and for stirring thick liquid-like materials

High torque

Comfortable operation and safety through auxiliary handle Auto-stop carbon brushes

	BDE 1100
		1100 Watt
		Electronic
	Two-Speed Drill
		BDE 1100
Comparative
device characteristics
Torque	55 Nm/22 Nm
Drilling capacity in
- Steel	16 mm/10 mm
- Softwood	40 mm/25 mm
No load speed	0 - 640 / 0 - 1.200 /min
Rated input power		1.100 W
Output power		620 W
Rated load speed	430/800 /min
Collar diameter		43 mm
Drilling spindle thread		5/8" - 16 UN
Chuck capacity		3 - 16 mm
Weight (without mains cable)		3,8 kg
Standard equipment	Geared chuck, chuck key,
	long side handle,
	drilling depth guide
Type		BDE 1100
Order no.	6.00806

EQUIPMENT FEATURES

Die cast aluminium gear housing

Vario Constamatic (VC) full-wave electronics

Thumbwheel for preselection of speed

Geared chuck

Especially suitable for working in places difficult to reach

Auto-stop carbon brushes

WBE 700

	705 Watt
	Electronic
	Angle Drill
	WBE 700
Comparative
device characteristics
Torque	8 Nm
Drilling capacity in
- Steel	10 mm
- Softwood	25 mm
No load speed	850 - 2.050 /min
Rated input power	705 W
Output power	430 W
Rated load speed	1.500 /min
Drilling spindle thread	1/2" - 20 UNF
Chuck capacity	1 - 10 mm
Weight (without mains cable)	1,8 kg
Standard equipment	Geared chuck, chuck key,
	side handle

Type	WBE 700
Order no.	6.00512

98 |

STIRRERS

EQUIPMENT FEATURES

Ideal stirring and mixing device for tough permanent use for plastering, painting and brickwork

Suitable for stirring thick liquid-like materials Die cast aluminium gear housing

Comfortable operation and safety through auxiliary handle Variospeed (V) electronics

Soft start

Quick change adapter (accessory)

RWE 1100

	1100 Watt
	Electronic
	Stirrer
	RWE 1100
Comparative
device characteristics
Torque	45 Nm
Maximum stirring basket diameter	160 mm
No load speed	0 - 700 /min
Rated input power	1.100 W
Output power	660 W
Rated load speed	480 /min
Collar diameter	43 mm
Bit retainer	M 14 female thread
Weight (without mains cable)	3,4 kg
Standard equipment	Side handle, without adapter

Type	RWE 1100
Order no.	6.01111

ACCESSORIES FOR THE STIRRERS

								GRINDERS
Agitator paddles with M14 MThr
Diameter	Length		Maximum	Maximum	Order			ANGLE
mm	mm		quantity kg	/min	no.
			material	speed
Type RS 2, mixing effect from top to bottom
Paint, Varnish, Cement slurry/finished mortar								PROCESORS
140	600		30 - 60	500 - 700	6.31951
110	600		15 - 40	500 - 700	6.31950
								METAL
Type RS 3, mixing effect from top to bottom
Plaster, Mortar, Filler compound,
Thermal insulation materials
100	600		10 - 25	500 - 700	6.31952			HAMMERS
130	600		20 - 50	500 - 700	6.31953
160	600		30 - 150	500 - 700	6.31954
Type RS 3, mixing effect from bottom to top
Plaster, Mortar, Filler compound,
Thermal insulation materials
100	600		10 - 25	500 - 700	6.31963			DRILLS
130	600		20 - 50	500 - 700	6.31964
160	600		30 - 150	500 - 700	6.31965			IMPACT
Type RS 4, mixing effect from bottom to top
2-component materials
100	600		10 - 20	500 - 700	6.31955
130	600		20 - 30	500 - 700	6.31956
160	600		30 - 150	500 - 700	6.31957			DRILLS
Type RS 8
Liquids, Granules, Float finish
120	600		35 - 70	500 - 700	6.31958
Connectors with M14 FThr								SCREWDRIVERS
For machines with other spindle holders
					Order
					no.
			Holder: 1/2" -20 UNF,		6.31959
			M 14 female thread
			Holder: 5/8"- 16 UN,		6.31960
			M 14 female thread				SANDINGWOOD	MACHINES
			Holder: M 14 male thread,		6.31961
			M 14 female thread
			Holder: M 18		6.31962
			male thread,
			M 14 female thread
			Holder: B 16		6.31969
			male thread,
			M 14 female thread
Quick change adapter								PLANERSAND
							ROUTERS
					Order
					no.
	for easily removing or fitting the				6.31966
	agitator paddle for cleaning or
	replacement purposes

| 99

DRILLS

EQUIPMENT FEATURES

Powerful three-speed drill with extra high torque for difficult drilling work, including into steel Robust mechanical gearbox with oil bath lubrication Die cast aluminium gear housing

Torque limiting clutch

Suitable for drilling with drill bits with large diameter (e.g. formwork drill bits), for stirring thick liquid-like materials and for screwing in long screws with large diameter (e.g. in frame and facade pegs)

High torque

Long side handle for work with high torque

ACCESSORIES FOR THE B 32/3 DRILL

Taper arbors for chucks

Hardened and ground

For chuck with taper socket

According to DIN 238

Outer	Chuck taper	Overall taper	Weight	Order
morse		arbor length	kg	no.
taper Ø		mm
MK 3	B 16	134	0,31	6.35125
MK 3	B 18	141	0,32	6.35126
MK 3	B 22	147	0,39	6.35128
MK 3	J 3	135	0,31	6.35129
MK 3	J 33	129	0,31	6.35130
MK 3	J 6	129	0,31	6.35131

	B 32/3
	NEW
	1800 Watt
	Three-Speed
	Drill
	B 32/3
Comparative device characteristics
Torque	190 Nm/120 Nm/90 Nm
Drilling capacity in
- Steel	32 mm
- Softwood	70 mm
No load speed	170/320/470 /min
Rated input power	1.800 W
Output power	1.200 W
Rated load speed	110/190/280 /min
Collar diameter	65 mm
Drilling spindle with taper socket	MK 3
Weight (without mains cable)	7,5 kg
Standard equipment	Chuck key, long side handle

Reducing sleeves for tools with morse taper

Standard type

Similar to DIN 2185

Ground external taper

Outer	Inner morse	Overall length	Weight	Order
morse	taper Ø	mm	kg	no.
taper Ø
MK 3	MK 1	99	0,25	6.35140
MK 3	MK 2	112	0,19	6.35143

Drift key

Suitable for	Overall length	Weight	Order
machine with	mm	kg	no.
morse taper
MK 3	190	0,15	6.42396

Type	B 32/3
Order no.	6.00323

100 |

MAGNETIC DRILLING UNITS

EQUIPMENT FEATURES

Magnet base with high holding power for safe operation Also suitable for working overhead on vertical and inclined surfaces using the safety belt provided

Enables precise and clean drilling. Motor and carriage form a unit

Height adjustment of carraige with pinion and toothed rack The motor can only be turned on after turning on

the magnet base

Fatigue-free work by hollow milling Two speeds

Holder bit for chuck (accessory) for working with spiral drill bits

		MAG 832
	Electromagnetic
	Hole Cutting and
		Drilling Unit
		MAG 832
Comparative device characteristics
Torque		50 Nm/19 Nm
Maximum cutting edge		32 mm
tool diameter
Magnet stand:
- Max. stroke		130 mm
- Power consumption		50 W
- Max. adhesive power		8.000 N
- Dimensions of the magnet base		90 x 170 mm
Motor:
Rated input power		800 W
Output power		450 W
No-load speeds	530/1.400 /min
Rated load speeds		320/850 /min
Collar diameter		43 mm
Spindle thread		5/8" - 16 UNF
Hole cutting and drilling unit:
Height (including motor) at
- Bottommost carriage position		405 mm
- Topmost carriage position		525 mm
Weight		14 kg
Standard equipment	Tool holder (internal diameter
	19 mm), 2 hexagon spanners,
		safety belt
Type		MAG 832
Order no.	6.00832

ACCESSORIES FOR THE ELECTROMAGNETIC HOLE

CUTTING AND DRILLING UNIT MAG 832

Cutters

HPHSS

Weldon shank 19 mm

A centring pin is required for working with the cutters.

Diameter	Cutting depth	Order
mm	mm	no.
14	25	6.30025
15	25	6.30026
16	25	6.30027
17	25	6.30028
18	25	6.30029
19	25	6.30030
20	25	6.30031
21	25	6.30032
22	25	6.30033
23	25	6.30034
24	25	6.30035
25	25	6.30036
26	25	6.30037
27	25	6.30038
28	25	6.30039
29	25	6.30040
30	25	6.30041
31	25	6.30042
32	25	6.30043
14	50	6.30075
15	50	6.30076
16	50	6.30077
17	50	6.30078
18	50	6.30079
19	50	6.30080
20	50	6.30081
21	50	6.30082
22	50	6.30083
23	50	6.30084
24	50	6.30085
25	50	6.30086
26	50	6.30087
27	50	6.30088
28	50	6.30089
29	50	6.30090
30	50	6.30091
31	50	6.30092
32	50	6.30093
Centring pins
For working with the cutters

Suitable for cutting depth up to	Order
mm	no.
25	6.30054
50	6.30055
Chuck holder
	Order
	no.
For chuck with female	6.30051
thread 1/2"-20 UNF

METAL PROCESORS ANGLE GRINDERS

HAMMERS

IMPACT DRILLS

DRILLS

WOOD SANDING MACHINES SCREWDRIVERS

ROUTERS AND PLANERS

| 101

BENCH DRILLING MACHINES

COMMON FEATURES

For drilling in wood, wood-like materials, plastics and metals Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed

Reduced speed for reduced noise during no load Powerful universal motor with high capacity reserve Sturdy steel column

Easy setting of upper part of the machine to the desired height

Solid base plate

Precise preselection of drilling depth Thermal overload protection Undervoltage protection

	TB E 4512			TB E 5014
		Bench Drilling Machine	Bench Drilling Machine
		Magnum	Magnum
		TB E 4512	TB E 5014
Comparative device characteristics
Drilling capacity in
- Steel		12 mm	14 mm
- Aluminium		20 mm	25 mm
- Softwood		40 mm	40 mm
Rated input power		700 W	800 W
Output power		450 W	500 W
No load speed		500 - 3.000 /min	400 - 4.500 /min
Rated load speed		3.000 /min	4.500 /min
Distance, bit centre to column		200 mm	205 mm
Depth of feed		60 mm	60 mm
Column Ø		60 mm	60 mm
Spindle cone		B 16	B 16
Chuck capacity		1 - 13 mm	1 - 13 mm
Height to top edge of upper section		675 mm	855 mm
Base plate
- Dimensions		220 x 380 mm	220 x 380 mm
- Clamping surface		220 x 280 mm	220 x 280 mm
- Clearance of the T-grooves		100 mm	100 mm
Maximum distance
Base plate chuck		210 mm	285 mm
Weight		28 kg	50 kg
Standard equipment		Quick-action keyless chuck Futuro Top	Quick-action keyless chuck Futuro Top
Type		TB E 4512	TB E 5014
Order no.		6.04512	6.05014

102 |