LG DV582 Manual

0 (0)

ENGLISH

OWNER'S MANUAL

DVD Player

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

DV582

P/NO : MFL63266932

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized

service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

This device is equipped with a portable battery or accumulator.

Safe way to remove the battery or the battery from the equipment:

Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators.

The battery shall not be exposed to excessived heat such as sunshine, fire or the like.

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

5.EEE Compliance with Directive

LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC and 2009/125/EC.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31–(0)36–547–8888)

2

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 3

Table of Contents

Types of Playable Discs

Type

Logo

DVD-VIDEO: Discs such as movies that can be purchased or rented.

DVD-R: Video mode and finalized only

DVD-RW: VR mode, Video mode and finalized only

DVD+R: Video mode only

DVD+RW: Video mode only

Audio CD: Music CDs or CD-R/CD-RW in music CD format that can be purchased.

This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.

About the Symbol Display

” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that disc.

Regional Codes

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.

If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.

Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by

viewing uses only engineering or

DEFINITION

THIS PRODUCT AND

PICTURE. IN CASE OF

IT IS

CONNECTION TO THE

QUESTIONS

THIS MODEL 525p AND

SERVICE CENTER.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

3

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 4

Hooking up the unit

Audio and Video Connection

The unit Audio/Video jacks are color coded (yellow for video, red for right audio and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit.

Rear of TV

Rear of DVD player

Connect the AC

power cord into the C power outlet.

Hooking up the unit - more you can do

A

Connect the TO TV jack on the unit and your TV using the SCART cable.

Caution : You must set the [TV Output Select] option to [RGB] on the setup menu to use this connection. (See page 7)

B Component Video Connections

Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on your TV using a YPbPr cable.

You will still need to connect the left and right audio cables to the TV, or digital audio cable to your stereo.

If your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] to [On] on the setup menu. (See page 7)

Caution : You must set the [TV Output Select] option to [YPbPr] on the setup menu to use this connection. (See page 7)

CDigital Audio Output Connection

Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jack to the corresponding jack on your amplifier.

If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all.

To see the audio format of the current disc in the on-screen display, press AUDIO.

This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs.

4

LG DV582 Manual

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 5

Remote Control

POWER (1)

Switches the unit ON or OFF.

SCAN (m / M)

Search backward or forward.

SKIP (. / >)

Go to previous or next chapter/track/file.

PAUSE/STEP (X)

Pauses playback temporarily/ press

repeatedly for frame-by-frame playback.

PLAY (N)

Starts playback.

STOP (x)

Stops playback.

DVD MENU

Accesses or exits the DVD menu.

DISPLAY

Accesses or exits On-Screen Display.

AUDIO (

)

 

Selects an audio language or audio channel.

 

SUBTITLE (

)

 

Selects a subtitle language.

 

ANGLE (

)

 

Selects a DVD camera angle, if available.

 

SETUP

Put the battery into the Remote Control

Accesses or exits the setup menu.

 

 

 

Remove the battery cover on the rear of Remote

 

 

Control, and insert battery (size AAA) with + and –

 

 

matched correctly.

OPEN/CLOSE (Z)

Opens and closes the disc tray.

CLEAR

Removes a track number on the Program List.

PROGRAM

Enters the program edit mode.

Numerical buttons

Selects numbered options in a menu.

TITLE

Accesses the disc’s title menu.

vV b B

Navigates the menus.

ENTER ()

Confirms menu selection.

RETURN (O)

Returns to menu or exits the menu.

A-B

Repeats a section.

REPEAT

Repeats a chapter, track, title or all.

ZOOM

Enlarges video image.

Button is not available.

5

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 6

Main Unit

a

b c d e

f

g

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a Disc Tray

 

 

 

 

 

N (Play)

Insert a disc here.

 

 

 

 

 

 

 

Starts playback.

b Z (Open / Close)

 

 

 

 

 

x (Stop)

Opens or closes the disc tray.

 

 

 

 

 

 

 

Stops playback.

c Display window

 

 

 

 

 

. (Skip)

 

 

 

 

 

 

 

Returns to the beginning of current chapter/track/file or go to

Shows the current status of the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the previous chapter/track/file.

 

 

 

 

 

 

 

 

 

d Remote sensor

 

 

 

 

 

> (Skip)

Point the remote control here.

 

 

 

 

 

 

 

Go to next chapter/track/file.

 

 

 

 

 

 

 

 

 

e 1 (Power)

g USB Port

Turn the unit ON or OFF.

Connect an USB Flash Drive.

 

6

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 7

Adjust the settings

 

 

ON REMOTE

1

Display setup menu:

SETUP

2

Select a desired option on the first level:

v V

3

Move to second level:

B

4

Select a desired option on the second level:

v V

5

Move to third level:

B

6

Change the setting:

v V / ENTER

 

 

 

Adjust the settings - more you can do

When you turn on for the first time (optional)

The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER.

Adjust the language settings

Menu Language – Select a language for the Setup menu and on-screen display.

Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/ Menu.

[Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list.

(see page 14) If you make a mistake while entering number, press CLEAR to delete numbers then correct it.

[Off] (for Disc Subtitle): Turn off Subtitle.

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV screen.

[4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected.

Display Mode – If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen.

[Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.

Progressive Scan (For Component Video connections) – Selects whether the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off].

If you set Progressive Scan to [On] in error, you must reset the unit. First, remove the disc in the unit. Next, press and hold STOP for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV.

TV Output Select – Select an option according to the TV connection type.

[RGB]: When your TV is connected with the SCART jack.

[YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit.

Adjust the audio settings

Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack.

[Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder.

[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder.

[Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder.

Sample Freq. (Frequency) – Selects the sampling frequency of the audio signal.

[48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format.

DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect.

Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound.

7

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 8

Adjust the lock settings

You must set the [Area Code] option to use the lock options. Select [Area Code] option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it.

If you forget your password you can reset it. First, remove the disc in the unit. Display setup menu then input the 6-digit number “210499”.

Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digits password using the numerical buttons then press ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. (See page 14)

Adjust the others settings

B.L.E. (Black Level Expansion) – To select the black level of playback pictures, set your preference and monitor’s ability.

REC Bitrate – You can choose a bit rate for USB direct recording. Higher bit rate gives the better sound quality but uses more space on the USB Flash Drive. For USB direct recording, see page 13.

DivX VOD

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

[Register]: Displays the registration code of your player. [Deregister]: Deregister your player and display the deregister code.

Displaying Disc Information

 

 

 

ON REMOTE

1

Press DISPLAY:

 

DISPLAY

 

 

 

 

 

2

Select a item:

 

v V

 

 

 

 

3

Adjust the Display menu settings:

 

b B / ENTER

 

 

 

 

4

To return the exit:

 

DISPLAY

 

 

 

 

Displaying Disc Information - more you can do

You can select an item by pressing vV and change or select the setting by pressing b B or using the numbered buttons (0-9).

Current title number/total number of titles

Current chapter number/total number of chapters

Elapsed playing time

Selected total time of current title/file

Selected audio language or channel

Selected subtitle

Selected angle/total number of angles

Symbol Used in this Manual

ALL

Audio CDs

DVD

-G CD-G discs

MP3

DivX files

WMA

 

8

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 9

Playing a Disc

 

 

ON REMOTE

1

Open the disc tray:

Z

OPEN/CLOSE

 

 

 

 

2

Insert a Disc:

-

 

 

 

 

 

3

Close the disc tray:

Z

OPEN/CLOSE

 

 

 

 

4

Start playback:

N

PLAY

 

 

 

 

5

To stop playback:

x

STOP

 

 

 

 

Playing a Disc - more you can

Stops the playback

The unit records the stopped point depending on

Xx” appears on

the screen briefly. Press PLAY ( N) to resume

(from the scene

point). If you press STOP (x) again or unload the

x” appears on the

screen), the unit will clear the stopped point.

 

(Xx=Resume Stop, x=Complete Stop)

 

The resume point may be cleared when a button

(for example

:POWER, OPEN/CLOSE, etc).

 

 

Playing a DVD that has a menu

DVD

 

Most DVD now have menus which

before

begins to play. You

can navigate these menus using vV

number

to highlight an

option. Press ENTER to select.

 

 

Playing a DVD VR disc

 

 

 

 

 

This unit will play DVD-RW disc that

 

Video Recording

(VR) format. When you insert a DVD

the

appear on the

screen. Use vV to select a title then

 

display DVD-VR

menu, press DVD MENU or TITLE.

 

 

Some DVD-VR disc are made with

by

.

Player does not support these kinds

.

 

Skip to the next/previous chapter/track/file ALL

Press SKIP (>) to move to the next chapter/track/file.

Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file.

Pause a playback

ALL

 

 

Press PAUSE/STEP

 

playback. Press PLAY ( N) to continue

playback.

 

 

 

Frame-by-Frame playback

DVD

 

Press PAUSE/STEP (X) repeatedly to

Frame-by-Frame playback.

Playing repeatedly

ALL

 

 

 

 

Press REPEAT repeatedly

select an item to be repeated. The current title,

chapter, track or all will

 

back repeatedly. To return to normal play-

back, press REPEAT repeatedly to select [Off].

Fast forward or fast

 

DVD

ACD WMA MP3

 

 

 

 

Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed.

-DVD, DivX: mmb P mm P mb P m / M p MB p MM p MMB

-ACD, WMA, MP3: mx8 P mx4 P mx2 / Mx2 p Mx4 p Mx8

Repeating a specific portion (A-B) DVD

ACD

Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be continually.

To return to normal playback, press A-B to select [Off].

Selecting a subtitle language

DVD

 

During playback, press SUBTITLE (

) repeatedly to select a desired subtitle

language.

 

 

 

Watching from a different angle

DVD

 

 

 

If the angle indicator appears on the

for a moment, you can select a

different camera angle by pressing

 

 

) repeatedly.

Hearing a different audio DVD

 

 

G

During playback, press AUDIO (

) repeatedly

switch between the available

audio languages, channels or encoding methods

speed (Forward

DVD DivX

 

 

 

 

While playback is paused, press SCAN (M) to slow down forward playback. You can change the various playback speed by pressing SCAN (M) repeatedly. Press PLAY ( N) to continue play at normal speed.

9

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 10

Watching a enlarged video DVD

During playback or pause mode, press ZOOM repeatedly to select zoom mode.

You can move through the zoomed picture

B buttons.

Press CLEAR to exit. (100% p 200% p 300%

p 100%)

Viewing the title menu

DVD

 

 

 

 

Press TITLE to display the

title menu, if available.

Viewing the DVD menu

 

 

 

 

Press DVD MENU to display

menu, if available.

Starting play from selected

DVD

 

 

 

Searches for the starting point of entered time

Press DISPLAY then

select clock icon. Enter a time then press

example, to find a scene

at 1 hour, 10 minutes, and 20 seconds, enter "11020" and press ENTER.

If you enter the wrong number, press CLEAR

again.

Last Scene Memory

DVD

 

 

 

 

This unit memorizes last scene

last disc that is viewed. The last scene

remains in memory even if you

the disc from the player or switch off the

unit. If you load a disc that has

memorized, the scene is

automatically recalled.

 

 

 

Screen Saver

 

 

 

 

 

The screen saver appears when

the unit in Stop mode for about five

minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off.

System Select

You must select the appropriate

mode for your TV system. Remove any

disc that might be in the unit,

hold PAUSE/STEP (X) for more than

five seconds to be able to select

(PAL, NTSC, AUTO).

Mixed disc or USB Flash Drive

MP3/WMA and JPEG

 

 

When playing a disc or USB Flash

contained with DivX, MP3/WMA and

JPEG files together, you can

menu of files you would like to play

by pressing TITLE.

 

Playing a DivX movie file

ON REMOTE

1

Open the disc tray:

Z

OPEN/CLOSE

2

Insert a disc:

-

 

 

 

 

 

3

Close the disc tray:

Z

OPEN/CLOSE

 

 

 

4

Select a movie file from the menu:

v V, DVD MENU

 

To go directly to file, enter the file number

 

 

 

using the numbered buttons (0-9).

 

 

 

 

 

5

Start playback:

N PLAY

 

 

 

 

6

To stop playback:

x

STOP

 

 

 

 

Playing a DivX movie file - more you can do

Changing the character set to display DivX subtitle correctly

Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. Press b B to select another language code until the subtitle is displayed properly and then press ENTER.

DivX file requirement

DivX file compatibility with this player is limited as follows:

Available resolution size: 720 x 576 (W x H) pixel.

The file names of DivX and subtitle are limited to 20 characters.

DivX file extensions: “.avi”, “.mpg”, “.mpeg”

Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi),

SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP43”, “3IVX”

Only the playback function is supported with DivX 6.0 in the unit.

Playable Audio format: “Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”

Sampling frequency: within 8 to 48 kHz (MP3), within 32 to 48 kHz (WMA)

Bit rate: within 8 to 320 kbps (MP3), within 32 to 192 kbps (WMA), less than 4 Mbps (DivX file)

CD-R/RW, DVD±R/RW Format: ISO 9660

Maximum Files/Folders: Less than 600 (total number of files and folders)

10

DV582-E.BTURLLK_6932_ENG 2/19/10 7:37 PM Page 11

This player does not support the file that are recorded with GMC*1 or Qpel*2. Those are video encoding techniques in MPEG4 standard, like DivX have. *1 GMC - Global Motion Compensation

*2 Qpel - Quarter pixel

Listening to Music Disc or files

 

 

 

ON REMOTE

1

Open the disc tray:

Z

OPEN/CLOSE

 

 

 

 

2

Insert a disc:

-

 

3

Close the disc tray:

Z

OPEN/CLOSE

 

 

 

4

Select a music from the menu:

v V, DVD MENU

 

To go directly to track/file, enter the track/file

 

 

 

number using the numbered buttons (0-9).

 

 

 

 

 

5

Start playback:

N PLAY

6

To stop playback:

x

STOP

 

 

 

 

Listening to Music Disc or files - more you can do

Creating your own program

You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. To add a music(s) on the program list, press PROGRAM to enter the program edit mode ( E mark appears on the menu). Select a desired music on the [List] then press ENTER to add the music to the program list. Select a music from the program list then press ENTER to start programmed playback. To clear a music from the program list, select the music you want to clear then press CLEAR in program edit mode. To clear all music from the program list, select [Clear All] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off.

Playing a CD-G disc

Once you insert an CD-G disc, a menu appears on the screen. Use vV to select a track then press PLAY ( N). To display the CD-G menu during playback, press STOP (x ) twice. You can display the setup menu by pressing SETUP only when CD-G menu appears on the TV screen.

Displaying file information (ID3 Tag)

While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly.

MP3/WMA music file requirement

MP3/WMA compatibility with this unit is limited as follows:

File extensions: “.mp3”, “.wma”

Sampling frequency: within 8 to 48 kHz (MP3), within 32 to 48 kHz (WMA)

Bit rate: within 8 to 320 kbps (MP3), within 32 to 192 kbps (WMA)

CD-R/RW, DVD±R/RW Format: ISO 9660

Maximum Files/Folders: Less than 600 (total number of files and folders)

Tip:

Press and hold v V to move previous or the next page.

11

Loading...
+ 24 hidden pages