COLOUR TELEVISION |
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT |
|
Contents |
|
|
AV-29LS24 AV-29LX14 AV-29VS24 AV-29VX54 AV-29VX74 AV-29WX14 AV-29WX24 AV-25LS24 AV-25LX14 AV-25VS24 AV-25VX54 AV-25VX74
AV-21CS24 AV-21CX14 AV-21DX14 AV-21LX14 AV-21VS24 AV-21VX14 AV-21VX54 AV-21VX74 AV-21WS24 AV-21WX14 AV-21YX14
Knowing your TV’s features ....................................................... |
3 |
Remote control buttons and basic functions .............................. |
4 |
TV buttons and functions ........................................................... |
6 |
Setting up your TV ..................................................................... |
7 |
Basic setting for picture .............................................................. |
9 |
Advanced setting for picture ..................................................... |
11 |
Original features for picture ...................................................... |
12 |
Basic setting for sound ............................................................. |
14 |
Advanced setting for sound ..................................................... |
15 |
Favorite channel and video setting .......................................... |
16 |
Customized setting .................................................................. |
17 |
TV channel presetting .............................................................. |
19 |
Additional preparation .............................................................. |
22 |
Troubleshooting ....................................................................... |
23 |
Specifications .............................................................. |
Back cover |
INSTRUCTIONS
GGT0045-001C-H
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.
1Operate only from the power source indicated on the rear of the TV.
2Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord.
3Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.
|
|
15 cm |
10 cm |
10 cm |
15 cm |
7If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket.
8The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: <AV-21WS24/AV-21WX14/AV-21YX14 only>
A REMOVABLE PLASTIC COVER IS FIXED TO THE TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO PREVENT THIS COVER FROM BEING ACCIDENTALLY SWALLOWED BY BABIES OR CHILDREN, REMOVE IT FROM THE TELEVISION AND STORE IT IN A SAFE PLACE. IF THE COVER IS SWALLOWED SEEK THE ADVICE OF A DOCTOR IMMEDIATELY.
4Do not allow objects or liquid into the cabinet openings.
5In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
6The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
2
5
1
6
2 3
Main features
|
PIP (Picture in Picture) |
You can view two different sources (e.g. TV programme and VCR sources) at the same |
||
4 |
|
time. |
||
|
|
|
||
TELETEXT |
You can view teletext programmes which are broadcasted by some TV channels. Teletext |
|||
|
||||
|
|
programme is an information in text form. |
|
|
|
A2/NICAM |
You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 |
||
|
(STEREO / I■II) |
or NICAM Sound-multiplex system. |
|
|
|
FAVORITE CH (Channel) |
You can register up to four favorite channels for quick recall with one press. |
|
|
|
AI ECO |
TV detects the brightness of your room and automatically adjust the picture brightness to a |
||
|
|
suitable level for a better eye care. |
||
|
|
|
|
|
|
AI VOLUME |
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden |
||
|
|
change of the volume when selecting different TV channel. |
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is not available for your TV, it is not displayed in the menu.
|
Function |
29LX14-AV |
29WX14-AV |
25LX14-AV 21LX14-AV |
21VX14-AV 21WX14-AV |
29VX54-AV |
25VX54-AV 21VX54-AV |
29WX24-AV |
29LS24-AV |
29VS24-AV |
25LS24-AV |
21CS24-AV |
25VS24-AV 21WS24-AV 21VS24-AV |
29VX74-AV |
25VX74-AV 21VX74-AV |
21CX14-AV |
21DX14-AV |
21YX14-AV |
|
Model No. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
(STEREO/I■II) |
– |
– |
– |
– |
– |
– |
– |
_ |
_ |
_ |
_ |
_ |
– |
– |
– |
– |
– |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
*PICTURE BOOSTER |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
_ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
*ECO |
– |
_ |
– |
_ |
_ |
_ |
_ |
– |
_ |
– |
– |
_ |
_ |
_ |
– |
– |
– |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4,6 |
PIP control buttons |
– |
– |
– |
– |
_ |
_ |
– |
– |
– |
– |
– |
– |
_ |
_ |
– |
– |
– |
|
(Green label) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5,6 |
TELETEXT control |
– |
– |
– |
– |
– |
– |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
– |
– |
– |
|
buttons (Black label) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
– |
PICTURE TILT |
_ |
_ |
– |
– |
_ |
– |
_ |
_ |
_ |
– |
– |
– |
_ |
– |
– |
– |
– |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
– |
COMPRESS (16:9) |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
_ |
– |
_ |
_ |
_ |
– |
_ |
– |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
No. |
Press |
To |
1 |
POWER |
Turn on or off the TV from standby mode. |
2 |
MENU/OK |
Display menu and confirm selected function. |
3 |
5 / ∞ / 2 / 3 |
Select and adjust menu function. |
4 |
CHANNEL -/+ |
Select the desired channel number. |
5 |
VOLUME -/+ |
Adjust the volume level. |
6 |
TV/VIDEO |
Select TV or video terminal input. |
7 |
MUTING |
Turn off the volume. |
|
|
Press this button again to resume the volume. |
8 |
DISPLAY |
Display the programme number or video terminal number, stereo/bilingual broadcast system |
|
|
and PR list (channel list) on the screen. |
|
|
You can select the channel using the PR list. |
|
|
1 Press the DISPLAY button once to display the PR list. |
|
|
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button. |
|
|
You can confirm the favorite channels in the PR list. The channels set to favorite channels are |
|
|
indicated with coloured mark. |
9 |
0~9, -/-- |
Select the programme number. For two digits programme number, press -/--, then press the |
|
|
number button. |
!RETURN+ a) Return to the frequently view channel with one touch.
1Choose the channel you want to register.
2Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears. To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b)Return to the previously viewed channel, if you have not set or have cancelled the Return channel as above.
|
1 |
8 |
6 |
2 |
3 |
|
|
|
7 |
9
! 4 5
4
Remote control buttons and basic functions (continued)
How to operate menus and menus locations |
|
|
Top menu |
2nd menu |
Location |
3rd menu |
Location |
|||||
|
|
|
|
|
|
|
MENU |
INPUT |
EXT. INPUT |
P.18 |
– |
– |
To |
|
|
Operation |
|
Note |
|||||||
|
|
|
|
|
|
|
|
|
DISPLAY |
P.18 |
– |
– |
Display the MENU |
Press the MENU/OK button 2. |
|
To exit the MENU, |
|
|
|
||||||
|
|
|
PICTURE |
PICTURE MODE |
P.9 |
– |
– |
|||||
|
|
|
|
|
press the DISPLAY |
|
|
|||||
|
|
|
|
|
|
|
*If you want to |
PICTURE SETTING |
P.10 |
– |
– |
|
|
|
|
|
|
button 8 or choose |
|
|
|||||
|
|
|
|
|
EXIT menu. |
|
|
adjust PICTURE |
WHITE BALANCE |
P.10 |
– |
– |
|
|
|
|
|
|
|
|
SETTING menu, |
|
|
|
|
|
|
|
|
|
|
|
|
PICTURE |
– |
VNR |
P.17 |
|
|
|
|
|
|
|
|
|
|||||
Display the top |
|
Press 5/∞ buttons 3 to choose a |
Press ∞ button 3 to |
|
|
you must set |
FEATURES |
|
|
|
||
menu |
|
menu title. Then press MENU/OK |
display the next page |
|
|
PICTURE MODE |
|
FAVORITE CH SETTING |
P.16 |
|||
|
|
button 2. |
|
|
for more functions. |
|
|
menu to USER. |
|
|
VIDEO SETTING |
P.16 |
|
|
|
|
|
|
|
|
|
|
|
COLOUR SYSTEM |
P.9 |
Display the 2nd |
|
Press 5/∞ buttons 3 to choose a |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
PICTURE BOOSTER |
P.10 |
||||
menu |
|
menu title. Then press MENU/OK |
|
|
|
|
|
|
||||
|
|
button 2. |
|
|
|
|
|
|
|
|
COMPRESS (16:9) |
P.11 |
|
|
|
|
|
|
|
|
|
|
|
PICTURE TILT |
P.11 |
Display the 3rd |
|
Press 5/∞ buttons 3 to choose a |
|
|
|
|
|
|
||||
|
|
|
|
SOUND |
STEREO/I■II |
P.15 |
– |
– |
||||
menu |
|
menu title. Then press MENU/OK |
|
|
|
|||||||
|
|
button 2. |
|
|
|
|
|
*If you want to |
AI VOLUME |
P.15 |
– |
– |
|
|
|
|
|
|
|
|
adjust |
SOUND MODE |
P.14 |
– |
– |
Return to the |
|
Press the DISPLAY button 8. |
|
|
|
|
||||||
|
|
– |
|
|
EQUALIZER |
|||||||
|
|
|
|
EQUALIZER |
P.15 |
– |
– |
|||||
previous menu |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
menu, you must |
||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
BALANCE |
P.14 |
– |
– |
||
Choose the setting |
Press 5/∞ buttons 3 to choose |
|
Press the MENU/OK |
|
|
set SOUND |
||||||
of a function |
|
a function. Then press the 2/3 |
|
button 2 to exit from |
|
|
MODE menu to |
SOUND TURBO |
P.14 |
– |
– |
|
|
|
|
|
USER. |
|
|
|
|
||||
|
|
buttons 3 to change the setting. |
|
the menu. |
|
|
CINEMA SURROUND |
P.15 |
– |
– |
||
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
FEATURES |
OFF TIMER |
P.17 |
– |
– |
Adjust the effect |
Press 5/∞ buttons 3 to choose |
|
|
|
|
|||||||
|
|
|
|
|
CHILD LOCK |
P.17 |
– |
– |
||||
level of a function |
a function. Then press the 2/3 |
|
|
|
|
|
||||||
|
|
buttons 3 to adjust the effect |
|
|
|
|
|
AI ECO SENSOR |
P.11 |
– |
– |
|
|
|
level. |
|
|
|
|
|
|
PIP |
– |
PIP,SUB INPUT,SWAP |
P.12 |
|
|
|
|
|
|
|
|
INSTALL |
AUTO PROGRAM |
P.19 |
– |
– |
Display the sub |
|
Press the 5/∞ buttons 3 to |
|
|
|
|
||||||
menu of a function. |
choose a function. Then press |
|
– |
|
|
|
EDIT/MANUAL |
P.19 |
DELETE, MOVE, |
P.19- |
||
|
|
MENU/OK button 2 to display |
|
|
|
|
|
|
MANUAL, INSERT |
P.20 |
||
|
|
|
|
|
|
|
|
|
||||
|
|
the sub menu. |
|
|
|
|
|
LANGUAGE |
P.17 |
LANGUAGE |
P.17 |
|
|
|
|
|
|
|
|
|
|
BLUE BACK |
P.11 |
– |
– |
The following chart shows locations of functions in menus. In this manual, |
|
|
|
|||||||||
|
|
|
AUTO SHUTOFF |
P.18 |
– |
– |
||||||
location of a function is described as follows: |
|
|
|
|
|
|||||||
|
|
|
|
|
VIDEO-2 SETTING |
P.18 |
– |
– |
||||
MENU |
Top menu |
2nd menu |
|
|
|
|
|
|||||
|
|
|
|
|
AI ECO DISPLAY |
P.11 |
– |
– |
||||
MENU |
Top menu |
2nd menu |
3rd menu |
|
|
|
||||||
|
|
|
TEXT LANGUAGE |
P.13 |
TEXT LANGUAGE |
P.13 |
||||||
|
|
|
|
|
|
|
|
|
||||
Note: Some functions have the 4th menus as the sub-menus. |
|
|
EXIT |
– |
– |
– |
– |
5
The illustrations shown below is for AV-29VS24 and AV-21CS24 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated.
|
|
|
|
|
No. |
Button/terminal |
Description |
Page |
|
Front of the TV |
|
|
|
1 |
L (main power) |
Press to turn on or turn off the TV’s main power. |
– |
||
AV-29VS24 |
|
|
|
2 |
POWER lamp |
Indicate the TV is being turned on or off. |
– |
||
|
|
|
|
|
No colour |
: TV’s main power is being turned off. |
|
||
! |
9 |
8 7 |
6 5 |
43 2 |
1 |
|
|
||
|
Red |
: TV’s main power is being turned on. |
|
||||||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Note: When you turn off the power switch while TV is in standby |
||
|
|
|
|
|
|
|
mode, the light of power lamp will be off in 10 -15 seconds. |
V L/MONO |
R |
MENU |
CHANNEL |
VOLUME TV/VIDEO |
POWER |
|
|
|
|||
IN (VIDEO-3) |
|
OK |
|
EXIT |
|
AV-21CS24
3 |
ECO sensor |
|
– |
4 |
Remote control sensor |
– |
|
5 |
TV/VIDEO |
Press to select TV or video mode. |
– |
6 |
VOLUME -/+ |
Press to adjust the volume level. |
– |
! 9 8 7
MENU |
CHANNEL |
V |
L / MONO |
R |
|
IN (VIDEO-2) |
OK |
6 |
4 2 1 |
7 CHANNEL -/+ Press to select the desired channel. |
– |
VOLUME
8 |
MENU |
Press to display the menu. |
– |
9 |
IN (VIDEO-3) |
Video and audio input jacks for VIDEO-3 mode. |
22 |
POWER |
IN (VIDEO-2) |
Video and audio input jacks for VIDEO-2 mode. |
22 |
|
|||
! |
|
Headphone jack. |
22 |
" |
|
Aerial socket. |
7 |
Rear of the TV |
|
|
|||
AV-29VS24 |
|
AV-21CS24 |
|
||
VIDEO-1 |
COMPONENT |
|
VIDEO-1 |
|
|
|
(VIDEO-2) |
OUTPUT |
OUTPUT |
||
INPUT |
|
INPUT |
|||
|
INPUT |
|
|
||
S |
|
|
|
|
|
OVER |
|
|
|
|
|
V |
Y/V |
|
V |
V |
V |
|
|
||||
L/MONO CB |
L/MONO |
L |
L/MONO |
L |
|
R |
CR |
R |
R |
R |
R |
|
|
|
|
||
% $ # " |
% |
# " |
# |
OUTPUT |
|
Video and audio output jacks. (The component video |
22 |
|
|
|
|
signal cannot be output.) |
|
|
$ |
COMPONENT |
Video or component video, and audio input jacks for |
22 |
||
|
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting |
|
|||
|
|
|
the “VIDEO-2 SETTING” function (see page 18). |
|
|
% |
VIDEO-1 INPUT |
Video or S-VIDEO, and audio input jacks for VIDEO-1 |
7 |
||
|
|
|
mode |
|
|
How to operate the menus with the TV button |
|
|
|||
|
|
|
|
|
|
TV button |
Work as same as the button on the |
Note |
|
||
remote control unit |
|
||||
|
|
|
|
||
MENU |
MENU/OK button |
To display main menu and exit |
|||
|
|
|
|
menu after finish setting. |
|
CHANNEL -/+ |
∞/5 button |
To select menu function. |
|
||
VOLUME -/+ |
2/3 button |
To adjust the desired function. |
6
CAUTION
• Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables. For details, see the manual of your VCR.
Rear of TV |
|
|
|
|
|
VHF/UHF outdoor aerial |
|
|
|
AV-29VS24 |
|
||
|
|
|
VIDEO-1 |
COMPONENT |
|
|
|
|
|
|
(VIDEO-2) |
OUTPUT |
|
|
|
|
INPUT |
|
||
|
|
|
|
INPUT |
|
|
|
|
|
S |
|
|
|
|
|
|
OVER |
|
|
|
|
|
|
V |
Y/V |
|
V |
|
|
|
L/MONO CB |
L/MONO |
L |
|
|
|
|
R |
CR |
R |
R |
To video |
|
To audio |
To RF |
|
|
|
output |
|
output |
output |
|
|
|
To S-video |
|
|
|
|
|
|
output |
VCR |
To aerial input |
|
|
|
The illustration shown is just a sample. It may not be same as your TV.
2 Connecting the compatible main plug to the AC outlet.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and - polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries. Notes:
•Use AA/R6/UM-3 dry cell batteries.
•If the remote control does not work properly, fit
new batteries. The supplied batteries are for testing, not regular use.
4Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
7
Setting up your TV (continued)
5Making the initial settings
Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below:
LANGUAGE
ENGLISH
кмллдав
FRANÇAIS
BACK ■
OK
TEXT LANGUAGE |
|
AUTO PROGRAM |
|
|
|
AUTO PROGRAM |
|
|
EDIT |
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
PR |
CH/CC |
|
|
|
GROUP–1 |
|
|
|
|
|
|
SETUP TOUR RESTART? |
|
|||||||
|
GROUP–2 |
|
|
|
CH 12 |
|
|
7 |
|
CH 09 |
|
|||||
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
8 |
|
CH 11 |
|
|||||
|
GROUP–3 |
|
22% |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
OK |
RESTART |
|
|
9 |
■ |
CH 13 |
3 |
|||
|
|
|
|
|
|
|
|
|||||||||
|
GROUP–4 |
|
|
|
|
|
|
|
10 |
|
|
|||||
|
|
|
|
|
|
|
|
|
■ |
NO |
|
11 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
12 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
13 |
|
|
||
BACK ■ |
|
|
|
|
|
|
|
|
|
BACK ■ |
|
■INSERT |
||||
|
OK |
|
OK |
|
|
|
|
|
|
|
|
|
OK MOVE |
■DELETE |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
■MANUAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Press 5/∞ button to |
• Press 5/∞ button to |
• TV will start searching |
• Press the red button to |
select your desired |
select your desired |
for the channels. |
cancel the SETUP TOUR |
language*, then press |
Teletext language |
|
RESTART function. |
MENU/OK button. |
group*. For details, |
To stop AUTO |
If you want to make initial |
|
see page 13. |
PROGRAM, press |
settings again when the |
|
(For CS24/LS24/ |
MENU/OK button. |
next time you turn on the |
|
VS24/VX74/WS24/ |
|
TV, press the MENU/OK |
|
WX24 series only) |
|
button to activate the |
|
|
|
SETUP TOUR RESTART |
|
|
|
function. |
•To complete the initial setting, press the
MENU/OK button. To edit the channel list, see page 19.
If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
*If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/ / /FRANÇAIS, you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-4.
If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/ /MELAYU/INDONESIA, you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-3.
8
COLOUR SYSTEM
You can select the appropriate colour system when the picture is not clear or no colour appears.
Press the COLOUR SYSTEM button to select a setting.
AUTO PAL SECAM NTSC3.58
NTSC4.43
To operate this function with a menu:
MENU PICTURE menu PICTURE FEATURES menu
COLOUR SYSTEM
For the colour system in each country or region, see the table below:
Area |
Country or Region |
System |
|
|
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, |
|
|
|
Yemen, etc. |
PAL |
|
|
Indonesia, Malaysia, Singapore, Thailand, India, etc. |
|
|
Asia, Middle |
China, Vietnam, etc. |
PAL |
|
East |
Hong Kong, etc. |
PAL |
|
|
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. |
SECAM |
|
|
Philippines, Taiwan, Myanmar, etc. |
NTSC |
|
|
Russia, etc. |
SECAM |
|
Europe |
Czech Republic, Poland, etc. |
PAL |
|
Germany, Holland, Belgium, etc. |
PAL |
||
|
|||
|
UK, etc. |
PAL |
|
Oceania |
Australia, New Zealand, etc. |
PAL |
|
|
Republic of South Africa, etc. |
PAL |
|
Africa |
Nigeria, etc. |
PAL |
|
|
Egypt, Morocco, etc. |
SECAM |
PICTURE MODE
You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting.
SOFT |
Softens contrast and sharpness. |
BRIGHT |
Heightens contrast and sharpness. |
STANDARD |
Standard picture setting. |
USER |
You can change this picture setting as you like. |
|
Select USER and adjust following items in the |
|
PICTURE SETTING menu. (CONTRAST, BRIGHT, |
|
SHARP, COLOUR, TINT*) |
*TINT can only be adjusted in NTSC system.
To operate this function with a menu:
MENU |
PICTURE menu |
PICTURE MODE |
To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears.
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
9
Basic setting for picture (continued)
Adjusting the picture – USER
You can adjust the desired picture setting when selecting USER in PICTURE MODE.
1Select the USER in PICTURE MODE under PICTURE menu.
MENU PICTURE menu PICTURE MODE
USER
2Select the PICTURE SETTING in PICTURE menu, then adjust
the setting.
MENU PICTURE menu PICTURE SETTING
CONTRAST |
2 |
: Lower contrast |
3 |
: Higher contrast |
BRIGHT |
2 |
: Darker |
3 |
: Brighter |
SHARP |
2 |
: Softer |
3 |
: Higher |
COLOUR |
2 |
: Lighter |
3 |
: Deeper |
TINT* |
2 |
: Reddish |
3 |
: Greenish |
*TINT can only be adjusted in NTSC system.
WHITE BALANCE
You can change the white balance of the picture to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting.
MENU |
PICTURE menu |
WHITE BALANCE |
NORMAL |
Normal white balance. |
|
COOL |
Bluish white. |
|
WARM |
Reddish white. |
|
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due to the low signal reception.
Press the PICTURE BOOSTER button to select the desired mode.
HIGH |
Perform at maximum level. |
LOW |
Perform at minimum level. |
OFF |
Cancel the function |
To operate this function with a menu:
MENU |
PICTURE menu |
PICTURE FEATURES menu |
PICTURE BOOSTER |
|
10
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of your room.
Press the ECO button to select the desired mode.
1 |
Mild contrast (recommended). |
2 |
Even contrast. |
OFF |
Cancel the function. |
To operate this function with a menu:
MENU FEATURES menu AI ECO SENSOR
You can display the graphic of AI ECO SENSOR on the screen. Select the AI ECO DISPLAY in the INSTALL menu, then choose ON or OFF.
MENU |
INSTALL menu |
AI ECO DISPLAY |
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1Select the PICTURE TILT in the PICTURE FEATURES menu under PICTURE menu, then press MENU/OK button.
MENU PICTURE menu PICTURE FEATURES menu
PICTURE TILT
The following display appears.
PICTURE TILT
BACK ■
OK
2Press the 5/∞ buttons until the picture become level. Then press the MENU/OK button.
COMPRESS (16:9)
You can convert a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio).
Select the COMPRESS (16:9) in the PICTURE FEATURES menu under PICTURE menu, then choose ON or OFF.
MENU PICTURE menu PICTURE FEATURES menu
COMPRESS (16:9)
BLUE BACK
You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna.
Select the BLUE BACK in the INSTALL menu, then choose ON or OFF.
MENU |
INSTALL menu |
BLUE BACK |
If you wish to continue viewing the poor picture, cancel the BLUE BACK function.
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
11
PIP
You can display a sub picture on the screen.
Press the PIP operation buttons to display and change the sub picture setting.
PIP |
Display the sub picture. |
|
|
|||||||
|
To cancel, press the PIP button again. |
|||||||||
|
Notes: |
|
|
|
|
|
|
|||
|
• You can hear the sound from the main picture only. |
|||||||||
|
• Main picture and sub picture will use different input |
|||||||||
|
sources, which are TV and VIDEO mode. |
|||||||||
|
When the same input source are selected, the sub |
|||||||||
|
picture input source will change as follows: |
|||||||||
|
Main picture |
Sub picture |
|
|
||||||
|
TV |
VIDEO-1 = VIDEO-2 = VIDEO-3 |
||||||||
|
VIDEO-1 |
TV =VIDEO-2 =VIDEO-3 |
||||||||
|
VIDEO-2 |
TV =VIDEO-1 =VIDEO-3 |
||||||||
|
VIDEO-3 |
TV =VIDEO-1 =VIDEO-2 |
||||||||
SUB-P -/+ |
Select the desired channel for sub picture. |
|||||||||
(Input) |
Select the input source for the sub picture. |
|||||||||
(Swap) |
Swap between the main picture and sub picture. |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
(Position) |
Change the sub picture position. |
|||||||||
|
Each time you press on |
(Position) button, the sub |
||||||||
|
picture position will change as follows: |
|||||||||
|
lower right |
|
lower left |
|
|
upper left |
||||
|
|
|
||||||||
|
|
|
|
|
upper right |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
(Freeze) |
Freeze the sub picture to be still. |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
To operate this function with a menu:
MENU |
FEATURES menu |
PIP |
When VIDEO-2 is set to component, you can’t select VIDEO-2 for sub picture.
When VIDEO-2 is set to component, if the input source of main picture is set to VIDEO-2 with component, PIP button is disabled and sub picture can’t be displayed.
TELETEXT
You can watch the Teletext broadcast channel with TEXT function. 1 Press the TEXT button to select the desired mode as follows:
TV mode TEXT mode MIX mode
2Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages.
3Press TEXT or TV/VIDEO button to return to TV mode. You can also operate the teletext using the following buttons:
(Hold) |
Hold a teletext page. |
|
|
|||
|
The |
(Hold) are displayed at the top left of the screen. |
||||
|
To cancel, press |
(Hold) button again. |
||||
(Reveal) |
Display the hidden text (e.g. answers to a quiz). |
|
||||
|
To cancel, press |
(Reveal) button again. |
||||
(Size) |
Enlarge the teletext display. |
|
|
|||
(Index) |
Return to the index page instantly. |
|
|
|||
(Cancel) |
Watch TV programme while waiting for a teletext page. |
|
||||
|
When the teletext page is found, a page number |
|||||
|
appears at the upper left of the screen. |
|
|
|||
|
Press |
(Cancel) to view the teletext page. |
||||
(Sub-page) |
Operate the |
(Sub-page) function. |
|
|
||
|
Sub-page numbers are displayed at the left of the |
|||||
|
screen. |
|
|
|
|
|
|
To cancel sub-page function, press |
(Sub-page) |
||||
|
button again. |
|
|
|
|
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
12
Original features for picture (continued)
Using the List mode
You can store and recall the favorite teletext pages in memory using the colour buttons.
1In TEXT mode, press the MODE button to enter the List mode.
2Press a colour button, then press the number buttons to enter the page number.
3Press and hold down the (Store) button.
The page number is blinking white to indicate that they are stored in memory.
4To store other favorite teletext pages, repeat Step 2 to 3.
To recall the favorite teletext page, press the MODE button, then press the colour button.
To exit the List mode, press the MODE button again.
When viewing teletext programme, menu operations are not available. If characters on a teletext programme do not appear properly, change the TEXT LANGUAGE setting.
TEXT LANGUAGE
You can set the Teletext language group that corresponds to the programmes.
Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group.
MENU |
INSTALL menu |
TEXT LANGUAGE |
GROUP-1 English, German, Swedish / Finnish / Danish /
Hungarian, Italian, French, Spanish / Portuguese,
Turkish
GROUP-2 Polish, German, Estonian, Slovenian, Czech /
Slovakian, Rumanian
GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian
GROUP-4 English, French, Turkish, Arabic, Iranian
Depending on the broadcast, the language set may not display properly. For details, see in page 8.
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
13
SOUND SYSTEM
You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting.
B/G I D/K M
This function is not available in video mode.
For the sound system in each country or region, see the table below:
Area |
Country or Region |
System |
|
|
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, |
|
|
|
Yemen, etc. |
B/G |
|
|
Indonesia, Malaysia, Singapore, Thailand, India, etc. |
|
|
Asia, Middle |
China, Vietnam, etc. |
D/K |
|
East |
Hong Kong, etc. |
I |
|
|
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. |
B/G |
|
|
Philippines, Taiwan, Myanmar, etc. |
M |
|
|
Russia, etc. |
D/K |
|
Europe |
Czech Republic, Poland, etc. |
D/K |
|
Germany, Holland, Belgium, etc. |
B/G |
||
|
|||
|
UK, etc. |
I |
|
Oceania |
Australia, New Zealand, etc. |
B/G |
|
|
Republic of South Africa, etc. |
I |
|
Africa |
Nigeria, etc. |
B/G |
|
|
Egypt, Morocco, etc. |
B/G |
SOUND MODE
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the setting.
MENU |
SOUND menu |
SOUND MODE |
|
|
|
USER |
You can change this sound setting as you like. |
|
|
Select USER and adjust the frequencies in EQUALIZER |
|
|
(100, 300, 1K, 3K, 8K Hz). |
|
|
For details, see “EQUALIZER” on page 15. |
|
|
|
|
DYNAMIC |
Emphasize on both vocal sound and music. |
|
MUSIC |
Emphasize on music effect. |
|
NEWS |
Emphasize on vocal sound. |
BALANCE
You can adjust the volume balance between the left and right speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
MENU |
SOUND menu |
BALANCE |
SOUND TURBO
You can set the sound frequency to emphasize the low and high frequency levels.
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
MENU |
SOUND menu |
SOUND TURBO |
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
14
CINEMA SURROUND
You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting.
OFF |
Cancel the function. |
LOW |
Listen to sound with less wider audience effect. |
HIGH |
Listen to sound with more wider audience effect. |
MONO |
Listen to mono sound with stereo effect. |
To operate this function with a menu:
MENU |
SOUND menu |
CINEMA SURROUND |
If slight volume distortion occurs when you select HIGH mode, change the setting to LOW mode. The CINEMA SURROUND effect will be less noticeable.
If you use CINEMA SURROUND and SOUND TURBO together, volume distortion might occurs.
STEREO / I■II ( )
You can enjoy the stereo and bilingual broadcasted programmes.
Press the |
button to select the desired mode. |
|
Select stereo sound. |
|
Select monaural sound. |
I |
Select bilingual I (sub I). |
II |
Select bilingual II (sub II). |
MONO |
Cancels the Multi Sound function, and the sound |
|
becomes monaural. |
This function is not available in video mode. To operate this function with a menu:
MENU SOUND menu STEREO / I■II
EQUALIZER
You can adjust the sound frequencies when selecting USER mode in SOUND MODE.
1 Select the USER in SOUND MODE under SOUND menu.
MENU |
SOUND menu |
SOUND MODE |
USER |
2Select the EQUALIZER in SOUND menu.
MENU SOUND menu EQUALIZER
The following display appears.
|
|
EQUALIZER |
|
|
|
|
|
|
|
IIIIIIIIIIII |
IIIIIIIIIIIIIIIII |
IIIIIIIIIIIIIIIIIIIIIII |
IIIIIIIIIIIIIIIIIIIIIIIII |
IIIIIIIIIIII |
|
|
|
100 |
300 |
1K |
3K |
8K Hz |
|
|
|
BACK ■ |
OK |
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
||||
Select and adjust the desired frequencies. |
|||||||
4 |
Press the MENU/OK button to exit the menu. |
Adjust high frequency will affect higher pitch sound and vice versa.
MENU |
SOUND menu |
AI VOLUME |
About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.
15