QuickSpecs
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter
Recommended SKU - This adapter is a recommended option that has been selected by HPE experts to provide the right technology for a range of workloads and market segments offering the best combination of performance, value and availability.
Are you looking to reduce network congestion and improve cable management at the servers ?
The HPE FlexFabric 10Gb 2-port 533FLR-T Adapter is a dual-port 10GBASE-T adapter, featuring the 57810S 10 Gb Ethernet solution from QLogic in a PCIe 2.0 compliant form factor designed for HPE ProLiant servers. The HPE 533FLR-T Adapter delivers full line-rate Ethernet NIC performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters. Providing high performance Ethernet, iSCSI and FCoE connectivity, it is ideal for virtual server and cloud computing environments. It supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunneling offloads (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames, PXE boot) and virtualization features including SR-IOV, Network Partitioning (NPAR), VMware NetQueue and Microsoft VMQ.
For more effective utilization of the 10GbE bandwidth, the HPE 533FLR-T CNA offers Switch Independent Network Partitioning (NPAR) which enables segmentation of each 10GbE port into four virtual ports, with flexible allocation of bandwidth to each port. Allowing IT organizations to improve resource utilization while lowering infrastructure and operational costs.
The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and expense.
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter
Page 1
QuickSpecs |
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter |
|
|
|
|
Models |
|
|
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter |
700759-B21 |
|
HP FlexFabric 10Gb 2-port 533FLR-T FIO Adapter |
700760-B21 |
|
|
|
|
Kit Contents |
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter |
|
|
Quick install card |
|
|
Product warranty statement |
|
Compatibility -
Supported Servers
HPE ProLiant DL20 Gen9 Server
HPE ProLiant DL60 Gen9 Server
HPE ProLiant DL80 Gen9 Server
HPE ProLiant DL120 Gen9 Server
HPE ProLiant DL160 Gen9 Server
HPE ProLiant DL180 Gen9 Server
HPE ProLiant DL360 Gen9 Server
HPE ProLiant DL360 Gen10 Server
HPE ProLiant DL380 Gen9 Server
HPE ProLiant DL380 Gen10 Server
HPE ProLiant DL560 Gen9 Server
HPE ProLiant DL580 Gen9 Server HPE Apollo 2000 XL170r Gen9 Server HPE Apollo 2000 XL190r Gen9 Server HPE Apollo 4200 Gen9 Server
HPE Apollo 4500-XL450 Gen9 Server
HPE Apollo 6000 XL230a Gen9 Server
HPE Apollo 6000 XL230b Gen9 Server
HPE Apollo 6000 XL250a Gen9 Server
NOTE: This is a list of supported servers. Some may be discontinued.
Page 2
QuickSpecs |
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter |
|
|
|
|
Standard Features |
|
At a Glance Features |
• Industry-leading throughput and latency performance |
|
• FlexibleLOM adapter for Ethernet NIC, iSCSI or FCoE connectivity |
|
• Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports |
|
• 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling |
|
• Up to 40 Gb/s bi-directional near line rate throughput |
|
• Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE) |
|
• iSCSI and FCoE hardware offloads |
|
• Tunnel offload support (NVGRE, VXLAN) |
|
• Improved small packet performance |
|
• Optimized for virtual server environments with support for Network Partitioning (NPAR) and Single-Root |
|
I/O Virtualization (SR-IOV) |
|
• Active Health Systems support |
|
• PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS |
|
• On chip temperature monitor (Sea of Sensors) |
|
• Field replaceable and upgradeable |
|
• Support for Preboot eXecution Environment (PXE) |
|
• Converged Network Utility (CNU) |
|
|
Throughput- |
This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing |
Theoretical Bandwidth |
the network performance needed to improve response times and alleviate bottlenecks. |
|
|
802.1Q VLANs |
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be |
|
separated into multiple virtual NICs for added network segmentation and enhanced security and performance. |
|
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same |
|
VLAN domain also improves performance. |
|
|
Checksum & |
Normally the TCP Checksum is computed by the protocol stack. Segmentation Offload is technique for |
Segmentation Offload |
increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead. The |
|
technique is also called TCP segmentation offload (TSO) when applied to TCP, or generic segmentation offload |
|
(GSO). |
|
|
Configuration Utilities |
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable |
|
initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows |
|
operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment |
|
allow for unattended OS installations. |
|
|
DPDK |
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments. |
|
|
HPE Sea Of Sensors |
Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity - |
3D |
heat - across the server. When temperatures get too high, sensors can initiate fans and make other adjustments |
Page 3