Graco 12 VDC, 260020, 260024, 260000, 260017 User Manual

Instructions - Parts List

GTP10 Pump	EN
	311304H

For pumping gasoline, diesel fuel, and kerosene. Do not use to pump other fluids including water.

Models 260000 through 260017, 260019, 260024, 260580, and 260581 10 gpm (38 lpm), 12 VDC (CSA C/US listed motor)

Models 260020 and 260021, 10 gpm (38 lpm), 24 VDC Models 260022 and 260023, 12 gpm (45 lpm), 230 VAC Models 260025 through 260028

12 gpm (45 lpm), 115 VAC (CSA C/US listed motor)

10 psi (0.07 MPa, 0.7 bar) Maximum Working Pressure

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

CSA mark applies only to 12 VDC and 115 VAC motors for Class I, Div I, Group D Hazardous Locations

Models

Models

	Part No.	Hose		Nozzle
	12 VDC, 10 gpm (38 lpm), 12.5 amps
	260000	260069	- 12 ft (3.66 m) grounded	260079	- manual, leaded/diesel
	260001	260069	- 12 ft (3.66 m) grounded	260082	- automatic, regular/diesel
	260002	260069	- 12 ft (3.66 m) grounded	260078	- manual, unleaded
	260003	260069	- 12 ft (3.66 m) grounded	260083	- automatic, unleaded
	260004	260526	- 4 ft (1.22 m) UL listed assembly	260078 - manual, unleaded
		260523	- 8 ft (2.44 m) UL listed assembly
	260005	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260006	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260007	260524	- 6 ft (1.83 m) UL listed assembly	260078 - manual, unleaded
	260008	260524	- 6 ft (1.83 m) UL listed assembly	260078 - manual, unleaded
	260009	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260010	260522	- 10 ft (3.05 m) UL listed assembly	260078 - manual, unleaded
	260011	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260012	260523	- 8 ft (2.44 m) UL listed assembly	260078 - manual, unleaded
	260013	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260014	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260015	260523	- 8 ft (2.44 m) UL listed assembly	260078 - manual, unleaded
	260016	270521	- 12 ft (3.66 m) UL listed assembly	260078 - manual, unleaded
		260525	- 5 ft (1.52 m) UL listed assembly
	260017	260525	- 5 ft (1.52 m) UL listed assembly	260078 - manual, unleaded
	260019	None		None
	260024	None		None
	260580	260573	- 12 ft (3.66 m) grounded	260079	- manual, leaded/diesel
	260581	260573	- 12 ft (3.66 m) grounded	260082	- automatic, regular/diesel
	24 VDC, 10 gpm (38 lpm), 7 amps
	260020	260069	- 12 ft (3.66 m) grounded	260079	- manual, leaded/diesel
	260021	260069	- 12 ft (3.66 m) grounded	260082	- automatic, regular/diesel
	230 VAC, 12 gpm (45 lpm), 1 amps
	260022	260069	- 12 ft (3.66 m) grounded	260078	- manual, unleaded
	260023	260069	- 12 ft (3.66 m) grounded	260083	- automatic, unleaded
	115 VAC, 12 gpm (45 lpm), 2 amps
	260025	260069	- 12 ft (3.66 m) grounded	260079	- manual, leaded/diesel
	260026	260069	- 12 ft (3.66 m) grounded	260082	- automatic, regular/diesel
	260027	260069	- 12 ft (3.66 m) grounded	260078	- manual, unleaded
	260028	260069	- 12 ft (3.66 m) grounded	260083	- automatic, unleaded

2

311304H

Models

311304H

3

Warnings

Warnings

The following general warnings are for the setup, use, grounding, maintenance, and repair of this equipment. Additional, more specific warnings may be found throughout the body of this manual where applicable. Symbols appearing in the body of the manual refer to these general warnings. When these symbols appear throughout the manual, refer back to these pages for a description of the specific hazard.

WARNING

FIRE AND EXPLOSION HAZARD

When flammable fluids are present in the work area, such as gasoline and windshield wiper fluid, be aware that flammable fumes can ignite or explode. To help prevent fire and explosion:

•Use equipment only in well ventilated area.

•Eliminate all ignition sources, such as cigarettes and portable electric lamps.

•Keep work area free of debris, including rags and spilled or open containers of solvent and gasoline.

•Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

•Ground all equipment in the work area.

•Use only grounded hoses.

•If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

•Keep a fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.

•Turn off and disconnect power at main switch before disconnecting any cables and before servicing equipment.

•Connect only to grounded power source.

•All electrical wiring must be done by a qualified electrician and comply with all local codes and regulations.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

•Protective eyewear

•Clothing and respirator as recommended by the fluid and solvent manufacturer

•Gloves

•Hearing protection

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

•Follow Pressure Relief Procedure in this manual, when you stop dispensing and before cleaning, checking, or servicing equipment.

•Tighten all fluid connections before operating the equipment.

•Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

4

311304H

Warnings

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

•Do not operate the unit when fatigued or under the influence of drugs or alcohol.

•Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

•Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information about your material, request MSDS forms from distributor or retailer.

•Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco replacement parts only.

•Do not alter or modify equipment.

•Use equipment only for its intended purpose. Call your Graco distributor for information.

•Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

•Do not kink or over bend hoses or use hoses to pull equipment.

•Keep children and animals away from work area.

•Comply with all applicable safety regulations.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

311304H

5