FLORABEST FGH 709, FGH 700/9 series Operation And Safety Notes
GARDEN
CULTIVATOR
FGH 700/9
GARDEN CULTIVATOR
Operation and Safety Notes
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
GB / IE / CY Operation and Safety Notes Page 4
10
9
8
7
6b
4
5
3
1a
2
13
3
13
14
44
6b
19
20
21
23
22
16
18
17
12
12
11
1a
5
10
6a
6a
11
1b
1b
4
GB IE CY
Safety notes
This section deals with the basic safety regulations while working with the electric tiller.
Symbols
Symbols on the tool
Warning!
Read the user manual
Warning! Protect from rain
and damp
Danger of injury from objects spin-
ning off! Keep surrounding persons
away form the hazard area.
Warning! Switch off the tool and
disconnect it from the mains before
carrying out any cleaning or maintenance work.
Danger from damaged mains cable.
Keep mains cables away from tines!
Danger of injury from rotating parts.
The tines will continue to rotate after
the tool has been switched off. Wait
for them to stop moving.
93
Sound power level LWA in dB.
Safety class II
Do not dispose of electrical equipment
in household waste.
Contents
Safety notes ................................................. 4
Symbols ....................................................4
General safety notes .................................5
Functional description ................................7
Functional parts ...........................................7
Intended purpose ....................................... 7
Assembly instructions ................................8
Scope of delivery ......................................8
Fitting the grip tubing ................................8
Operation ......................................................8
Switching on and off .................................. 8
Operating instructions ...............................8
Cleaning, maintenance, storage ................ 9
General cleaning and maintenance work ...9
Changing the tines ....................................9
Storage ...................................................10
Guarantee ...................................................10
Replacement parts .................................... 11
Disposal, environmental protection ........ 11
Technical specifi cations ........................... 1 1
EC Declaration of Conformity ..................12
Exploded diagram .....................................13
Grizzly Service-Center ..............................14
User manual
FGH 700/9 Electric Tiller
Before fi rst using the machine, please
read this instruction manual carefully,
for your own safety and for the safety
of others. Keep the manual in a safe
place and pass it on to any subsequent owner to ensure that the information contained therein is available
at all times.
5
GB IE CY
Symbols in the manual
Warning symbols with information
on damage and injury prevention.
Instruction symbols (the instruction is
explained at the place of the exclamation mark) with information on preventing
damage.
Help symbols with information on im-
proving tool handling.
General safety notes
Warning! Improper use of this tool
may lead to serious injury. Read this
instruction manual carefully before you
start working with the tool, and famil-
iarise yourself with its controls. Keep
the manual in a safe place and pass it
on to any subsequent owner to ensure
that the information it contains is always available.
Please read the following safety guide-
lines in order to avoid risk of fi re, electric
shock, personal injury and damage to
objects:
Preparation:
• For safety reasons, do not allow children
or young people under 16 or anyone not
familiarised with this instruction manual to
use the tool.
• Never use the tool while others, especially
children or pets, are close by.
• Familiarise yourself with handling the tool
and pay attention to all possible dangers
that may be overheard while working with
the tool.
• Check the terrain on which you will be using the tool, and remove stones, sticks,
wires or other foreign objects that may be
caught up and spun off.
• Wear proper working clothes, such as fi rm
footwear with non-slip soles and strong
long trousers. Do not use the tool barefoot
or wearing open-toed sandals.
• To prevent injury from the tines, only
switch the tool on in its working position.
• Examine the tool beforehand every time
you use it. Do not use the tool when the
safety components (such as the power
safety catch or guard), cutting parts or
bolts are missing, worn or damaged. In
particular, check the mains cable and
dead-man lever for damage.
• Only replace damaged bolts or tines in
complete sets to prevent imbalance.
• Only use replacement and accessory
parts delivered and recommended by the
manufacturer. Using foreign parts will immediately lead to loss of guarantee.
Working with the tool:
Keep your hands and feet away from
the tines while working, especially
when starting up the tool – injury hazard!
• Observe any noise-prevention regulations
and local by-laws. Using the tool may be
limited or prohibited on certain days such
as Sundays or public holidays, or during
certain times of the day (midday, at night)
or in certain areas (such as at health spas
and hospitals).
• Do not use the tool to chop up stones or
till lawn soil, as such use may damage the
tool.
• Do not use the tool in rain, foul weather or
damp surroundings (such as near garden
ponds or swimming pools). Only use in
daylight or good lighting conditions.
• Be sensible. Do not use the tool if you are
tired or easily distracted, or after the use
of alcohol or medicines. Take a break as
soon as you need one.
• Make sure that you are standing fi rmly
when using the tool, especially on slopes.
Loading...