HOT ROD DEVILLE
410 COMBO
212 COMBO
SERVICE MANUAL
CONTENTS:
Notices
Specifications
Parts lists:
PCB assembly
Chassis assembly
Cabinet assembly
Footswitch assembly
Miscellaneous
Schematics/diagrams
Fender Musical Instruments Corp. 7975 North Hayden Road Scottsdale, AZ 85258
HOT ROD DEVILLE
(This is the model name for warranty claims)
SERVICE MANUAL
SEPTEMBER 1996
IMPORTANT NOTICE:
The information contained herein is CONFIDENTIAL and PROPRIETARY to Fender Musical Instruments Corp. It is disclosed solely for use by qualified technicians for purposes of equipment maintenance and service. It is not to be disclosed to others without the expressed permission of Fender Musical Instruments Co. All specifications subject to change without notice.
For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used for post-warranty maintenance and repair.
Parts marked with an asterisk (*) indicate the required use of that specific part. This is necessary for RELIABILITY and SAFETY requirements. DO NOT USE A SUBSTITUTE!
A coded naming convention is used in the description of certain parts. The codes and what they mean are as follows:
CAPACITOR CODES |
HARDWARE CODES |
||||
CAP AE |
= |
Aluminum Electrolytic |
BLX |
= |
Black Oxide |
CAP CA |
= |
Ceramic Axial |
CR |
= |
Chrome Plated |
CAP CD |
= |
Ceramic Disk |
HWH |
= |
Hex Washer Head |
CAP MPF |
= |
Metalized Polyester Film |
M |
= |
Machine Screw |
CAP MY |
= |
Mylar |
NI |
= |
Nickel Plated |
CAP PFF |
= |
Polyester Film/Foil |
OHP |
= |
Oval Head Phillips |
RESISTOR CODES |
PB |
= |
Particle Board |
||
PHP |
= |
Pan Head Phillips |
|||
|
|
|
PHPS |
= Pan Head Phillips Sems |
|
RES CC |
= |
Carbon Comp |
SMA |
= Sheet Metal "A" Point |
|
RES CF |
= |
Carbon Film |
SMB |
= Sheet Metal "B" Point |
|
RES FP |
= |
Flame Proof |
SS |
= |
Stainless Steel |
RES MF |
= |
Metal Film |
TF |
= |
Thread Forming |
RES WW |
= |
Wire Wound |
ZI |
= |
Zinc Plated |
HOT ROD DEVILLE
SPECIFICATIONS
Product Release No.: PR 247 (This is not a model number)
Hot Rod Deville |
Hot Rod Deville 212 |
Input Impedance: |
Input 1: 1M ohm |
|
|
Input 2: |
136kΩ |
Power output: |
60 Watts RMS into |
|
|
8 or 4Ω @ 5% THD |
|
Preamp Out |
|
|
Output Impedance: |
1.5kΩ max |
|
Power Amp In |
|
|
Sensitivity: |
230mV for clipping |
|
Power Amp in |
|
|
Input Impedance: |
54kΩ |
|
Speaker Complement: |
Four 8 ohm Fender Model |
|
|
V1030 Special Design 10” |
|
|
Speakers (P/N 048832) |
|
DImensions: |
|
|
Height: |
23.5” |
(59.7 cm) |
Width: |
23.5" |
(59.7 cm) |
Depth: |
10.75" |
(27.3 cm) |
Weight: |
50 lbs. |
(22.7 kg) |
Input 1: 1M ohm
Input 2: 136kΩ
60 Watts RMS into
4 or 2Ω @ 5% THD
1.5kΩ max
230mV for clipping
54kΩ
Two 8 ohm Fender Re-issue “Gold Label” 12” speakers (P/N 037617)
21” |
(53.3 cm) |
24.25” |
(61.6 cm) |
10.75” |
(27.3 cm) |
53.5 lbs. |
(24.2kg) |
Product specifications are subject to change without notice
PARTS LIST
|
|
PRINTED CIRCUIT BOARD ASSEMBLY |
|
QTY |
PART # |
DESCRIPTION |
REFERENCE DESIGNATION |
1 |
050388003 |
PCB ASSY H/R DEVILLE 212 |
STUFFED |
3 |
028104 |
BUTTON PUSH SWITCH BLACK |
@S1,2,3 |
1 |
050688 |
CABLE JMPR 2 CKT .156 ROUND |
|
3 |
050687 |
CABLE JMPR 6 CKT .156 ROUND |
|
1 |
041311 |
CABLE REVERB |
@U2 |
4 |
038689001 |
CAP AE AX .47uF 100V |
C12,16,19,20 |
1 |
038690001 |
CAP AE AX 1.0uF 100V |
C8 |
5 |
009512 |
CAP AE AX 22uF 25V 20% |
C9,14,21,49,50 |
2 |
036954 |
CAP AE RDL 22uF 63V 20% |
C38,45 |
2 |
024819 |
CAP AE AX 22uF 500V |
C35,36 |
1 |
038693001 |
CAP AE AX 47uF 16V |
C1 |
2 |
024820 |
CAP AE AX 47uF 350V |
C33,34 |
4 |
031040 |
CAP AE RDL 100uF 100V 20% |
C37,39,42,43 |
2 |
028953 |
CA[ AE AX 100uF 350V 20% |
C31,32 |
Loading...