Ecovacs DEEBOT OZMO Т8 Instruction Manual [ru]

Instruction Manual/Bedienungsanleitung/Manual de instrucciones /Manuel d'instructions/Manuale d'uso/Руководство по эксплуатации

EN

DE

ES

FR

IT

RU

Instruction Manual 2 Bedienungsanleitung 37 Manual de instrucciones 72 Manuel d'instructions 107 Manuale d'uso 142 Руководство по эксплуатации 177

Live Smart. Enjoy Life.

Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our Customer Service Center where a technician will be able to help you with your specific problem or question.

For more information, please visit the ECOVACS ROBOTICS official website: www.ecovacs.com

The company reserves the right to make technological and/or design changes to this product for continuous improvement.

Thank you for choosing DEEBOT!

EN 2

Contents
1.	Important Safety Instructions	..........................................................................................................................................4
2.	Package Contents.............................................................................................................................................................	8
3.	Operating and Programming..........................................................................................................................................	13
4.	Maintenance ....................................................................................................................................................................	20
5.	Indicator Light..................................................................................................................................................................	29
6.	Troubleshooting...............................................................................................................................................................	30
7.	Technical Specifications .................................................................................................................................................	36

3EN

1. Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical Appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

SAVE THESE INSTRUCTIONS

1.This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision.

2.Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.

3.If there is a drop off in the cleaning area due

to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.

4.Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.

5.Please make sure your power supply source voltage matches the power voltage marked on the Auto-Empty Station.

6.For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.

7.Use only the original rechargeable battery and Auto-Empty Station provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited. For battery information, please refer to Specifications section.

8.Do not use without dust bin and/or filters in place.

9.Do not operate the Appliance in an area where there are lit candles or fragile objects.

10. D o n o t u s e i n e x t re m e l y h o t o r c o l d environments (below -5˚C/23˚F or above 40˚C/104˚F).

EN 4

11.Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.

12.Do not operate the Appliance in a room where an infant or child is sleeping.

13.Do not use Appliance on wet surfaces or surfaces with standing water.

14.Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.

15.Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.

16.Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.

17.Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.

18.Take care not to damage the power cord. Do not pull on or carry the Appliance or AutoEmpty Station by the power cord, use the power cord as a handle, close a door on the

power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.

19.If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.

20.Do not use with a damaged power cord or receptacle. Do not use the Appliance or AutoEmpty Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.

21.Do not use with a damaged power cord or receptacle. Do not use the Appliance or AutoEmpty Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.

22.Turn OFF the power switch before cleaning or maintaining the Appliance.

23.The plug must be removed from the receptacle before cleaning or maintaining the Auto-Empty Station.

5EN

24.Remove the Appliance from the Auto-Empty Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.

25.The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.

26.Please dispose of used batteries according to local laws and regulations.

27.Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.

28.When not using the Auto-Empty Station for a long period of time, please unplug it.

29.The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.

30.The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.

31.If the robot will not be used for a long time, power OFF the robot for storage and unplug the Auto-Empty Station.

32.WARNING: For the purposes of recharging the battery, only use the detachable supply unit CH1918 provided with the Appliance, or CH1822 sold separately as an accessory.

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation.

To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

EN 6

To disable Wi-Fi module on DEEBOT, power the robot ON.

Place the robot on the Auto-Empty Station making sure the Charging Contacts on DEEBOT and the Auto-Empty Station Pins make a connection.

Press and hold the AUTO Mode Button on the robot for 20 seconds until DEEBOT emits 3 beeps. To enable Wi-Fi module on DEEBOT, power the robot OFF and then power ON. The WiFi module is turned on when DEEBOT is restarted.

Class II

Short-circuit-proof safety isolating transformer

Switch mode power supply

For indoor use only

Direct current

Alternating current

For EU Countries

For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.

7EN

2. Package Contents/2.1 Package Contents

Robot

Auto-Empty Station

Power Cord

Dust Bag

Instruction Manual

	Side Brushes	OZMO Pro	Disposable Cleaning	High Efficiency Filter and
		Oscillating System	Cloths	Sponge Filter

Note: Figures and illustrations are for reference only and may differ from actual product appearance.

Product design and specifications are subject to changes without notice.

EN 8

2. Package Contents/2.2 Product Diagram

Robot

AUTO Mode Button

TrueDetect 3D

Sensor

TrueMapping

Distance Sensor

RESET Button

Top Cover

Wi-Fi Indicator

Light

Power Switch

Multi-function

Cleaning Tool

Auto-Empty Dust Bin
	Auto-Empty Outlet
	Sponge Filter
Dust Bin Handle
Release Button
Anti-collision Bumper
Filter Net	High Efficiency Filter
	9	EN

Bottom View

Charging Contacts

Carpet Detection

Sensor

Main Brush

Anti-drop Sensors

Main Brush

Release Button

Substitute Module (Pre-installed)

Auto-Empty Station

		Universal Wheel				Lid Release Button
		Side Brushes
			Indicator Light
		Driving Wheels

Infrared Singnal Emitter

Auto-Empty Station Pins

Auto-Empty Inlet

Water Outlet

Anti-drop Sensors

EN 10

Auto-Empty Station (Back)

Auto-Empty Station (Bottom)

Power Cord Wrap

Power Cord Port	Base Screw Socket

Dust Evacuation Tube

Cover Set Screws

Auto-Empty Station (Top)	Dust Evacuation Tube
	+ Tube Cover

Dust Bag Socket

Dust Evacuation Tube

Blower Cover

11 EN

Power Cord	OZMO Pro Oscillating System
	Reservoir	Water Inlet
		Reservoir
		Release Button
	Disposable
	Cleaning Cloth

* Please only attach the Disposable Cleaning Cloth to OZMO Pro.

EN 12

3. Operating and Programming/3.1 Notes Before Cleaning

Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.

During the first use, make sure each room door is open to help DEEBOT fully explore your house.

It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.

Put away objects including cables, cloths and slippers, etc. on the floor to improve the cleaning efficiency.

Before using the product on a rug with tasseled edges, please fold the rug edges under.

Please do not stand in narrow spaces, such as hallways, and make sure not to block the Detection Sensor.

13 EN

3. Operating and Programming/3.2 Quick Start

1 Remove Protective Materials

2 Assemble Auto-Empty Station

3 Install Side Brushes

Click

EN 14

3. Operating and Programming/

3.3 Charging DEEBOT

1 Auto-Empty Station Placement

2 Power ON

Note: I = ON, O = OFF.

DEEBOT cannot be charged when being powered OFF.

3 Charge DEEBOT

flashes when DEEBOT is charging. goes out when DEEBOT is fully charged.

6.5

* Before charging DEEBOT, make sure to install the Substitute Module.

15 EN

3. Operating and Programming/3.4 ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.

Before you start, make sure that:

•Your mobile phone is connected to a Wi-Fi network.

•The 2.4GHz band wireless signal is enabled on your router.

•The Wi-Fi indicator light on DEEBOT is slowly flashing.

Wi-Fi Indicator Light

	Slowly flashing	Disconnected to Wi-Fi or
		waiting for Wi-Fi connection
	Rapidly flashing	Connecting to Wi-Fi
	Solid	Connected to Wi-Fi

Tips:

If you have any problems during the Wi-Fi setup process, refer to the

Troubleshooting > Wi-Fi Connection section in this manual.

ECOVACS HOME

EN 16

3. Operating and Programming/3.5 Operating DEEBOT

During the first cleaning, please supervise DEEBOT and assist it should there be a problem.

1 Start

2 Pause

3 Return to Charge

Pressing for 3 seconds to send DEEBOT back to the Auto-Empty Station.

*When Auto-Empty Station is connected to power, DEEBOT automatically returns to the station to charge and empty the Dust Bin as it needs.

Note: The robot’s Control Panel stops glowing after the robot is paused for a few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot.

17 EN

3. Operating and Programming/3.6 OZMO Pro Oscillating System

Note:

1.Install OZMO Pro Oscillating System for floor scrubbing.

2.With electric oscillating mopping up to 480 times per minute, OZMO Pro is applicable for areas of highly concentrated dirt or dust. 3.Before installing OZMO Pro, please make sure the contacts are thoroughly dry.

4.Please avoid using OZMO Pro on the carpet.

1 Remove the Substitute Module

3 Attach Disposable Cleaning Cloth

2Add Water

*To prolong the service life of OZMO Pro, it is recommended to use purified water or softened water.

*Do not soak OZMO Pro in water.

* Please only attach the Disposable Cleaning Cloth to OZMO Pro. The Washable/Reusable Microfiber Cleaning

Cloth is not compatible with OZMO Pro. When attaching the Disposable Cleaning Cloth, make sure the fluffy side is attached to the Cleaning Cloth Plate, while the dotted side is faced outward.

EN 18

4	Dry Contacts Thoroughly	6 Start Mopping

5Install OZMO Pro

19 EN

4. Maintenance/4.1 Regular Maintenance

To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:

	Robot Part	Maintenance Frequency	Replacement Frequency
	Disposable Cleaning Cloth	/	Replace after each use
	Dust Bag	/	Dust Bags should be replaced when prompted by
			the Indicator Light/ECOVACS HOME App.
	Side Brush	Once every 2 weeks	Every 3-6 months
	Main Brush	Once per week	Every 6-12 months
	Sponge Filter/ High Efficiency Filter	Once per week	Every 3-6 months
	TrueDetect 3D Sensor
	Universal Wheel
	Anti-Drop Sensors	Once per week	/
	Bumper
	Charging Contacts
	Auto-Empty Station Pins

Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Auto-Empty Station. A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note: ECOVACS manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.

EN 20

4. Maintenance/4.2 OZMO Pro Oscillating System

1 Remove OZMO Pro

3 Disposable Cleaning Cloth

* After DEEBOT finishes mopping, please empty the reservoir.

2Wipe OZMO Pro Clean

*Wipe OZMO Pro Oscillating System with a clean, dry cloth. Do not soak into water.

21 EN

4. Maintenance/4.3 Auto-Empty Dust Bin and Filters

Dust Bin	Filter
1	1	4

2	2	5

3

3

EN 22

4. Maintenance/4.4 Main Brush and Side Brushes

Main Brush		Side Brushes

23 EN

4. Maintenance/4.5 Auto-Empty Station

Note: Before performing cleaning and maintenance on Auto-Empty Station, unplug it first.

* For a proper maintenance, wipe with a clean dry cloth, and avoid using any detergent or cleaning spray.

Auto-Empty Station Pins

Infrared Signal Emitter

Dust Bag

1 Dispose the Dust Bag

* The Dust Bag will be sealed by the handle so the dust will not leak.

EN 24

2	Clean the Blower Cover	4	Close the Dust Container Lid

3 Install the Dust Bag

25 EN

Dust Evacuation Tube

Unscrew the Dust Evacuation

Uninstall the Dust Evacuation

Clean the Dust Evacuation Tube

Tube Cover

Tube Cover

EN 26

4. Maintenance/4.6 Other Components

Note: Before cleaning the robot’s Charging Contacts and Auto-Empty Station Pins, turn the robot OFF and unplug the Auto-Empty Station.

1

4

2

5

3

27 EN

6	4. Maintenance/4.6 Storage

If DEEBOT will not be used for a while, fully charge DEEBOT and power OFF before storage. Charge DEEBOT every 1.5 month to prevent battery drain.

7

Note: When DEEBOT is not cleaning, it is recommended to keep

DEEBOT powered ON and charging.

EN 28

5. Indicator Light

DEEBOT will tell you something is wrong with an indicator light and voice report. More detailed support is available through the ECOVACS HOME App and online website.

	Indicator Light	Scenario
		The robot is cleaning
	AUTO Mode Button glows a solid WHITE
		The robot is paused while cleaning
		The robot is charging
	AUTO Mode Button flashes WHITE	The robot is starting
		The robot is relocating
	AUTO Mode Button glows a solid RED	The robot has low battery
	AUTO Mode Button flashes RED	The robot has a problem

29 EN

6. Troubleshooting/6.1Troubleshooting

	No.	Problem	Possible Causes	Solutions
			DEEBOT is not switched ON.	Switch ON DEEBOT.
			DEEBOT has not connected to the Auto-Empty	Be sure that the robot’s Charging Contacts have connected
			Station.	to the Auto-Empty Station Pins.
	1	DEEBOT is not charging.	The Power Cord is not connected to the Auto-	Make sure the Power Cord is firmly connected to the Auto-
			Empty Station.	Empty Station.
			The Auto-Empty Station is not connected to	Make sure the Auto-Empty Station is connected to the
			the power supply.	power supply.
			The battery is completely discharged.	Please contact Customer Care for help.
			The Auto-Empty Station is not correctly	Refer to section 3.2 to correctly place the Auto-Empty
			placed.	Station.
			The Auto-Empty Station is not correctly	Make sure the Auto-Empty Station is correctly connected.
			connected.
		DEEBOT cannot return to the	The Auto-Empty Station is manually moved	It is suggested not to move the Auto-Empty Station during
	2		during the cleaning.	the cleaning.
		Auto-Empty Station.
			DEEBOT is paused for more than 90 minutes.	It is suggested not to pause DEEBOT for more than 90
				minutes.
			DEEBOT did not start cleaning from the Auto-	Make sure DEEBOT starts cleaning from the Auto-Empty
			Empty Station.	Station.
			DEEBOT is tangled with something on the	DEEBOT will try various ways to free itself. If it is
			floor (electrical wires, curtains, carpet fringing,
		DEEBOT gets stuck while		unsuccessful, manually remove the obstacles and restart.
	3	working and stops.	etc.).
			DEEBOT might be stuck under furniture with	Please set a physical barrier, or set a Virtual Boundary in
			an entrance of similar height.	the ECOVACS HOME App.

EN 30