Instruction Manual/Bedienungsanleitung/Manual de instrucciones /Manuel d'instructions/Manuale d'uso/Руководство по эксплуатации
EN
DE
ES
FR
IT
RU
Instruction Manual 2 Bedienungsanleitung 37 Manual de instrucciones 72 Manuel d'instructions 107 Manuale d'uso 142 Руководство по эксплуатации 177
Live Smart. Enjoy Life.
Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our Customer Service Center where a technician will be able to help you with your specific problem or question.
For more information, please visit the ECOVACS ROBOTICS official website: www.ecovacs.com
The company reserves the right to make technological and/or design changes to this product for continuous improvement.
Thank you for choosing DEEBOT!
EN 2
Contents |
|
|
1. |
Important Safety Instructions |
..........................................................................................................................................4 |
2. |
Package Contents............................................................................................................................................................. |
8 |
3. |
Operating and Programming.......................................................................................................................................... |
13 |
4. |
Maintenance .................................................................................................................................................................... |
20 |
5. |
Indicator Light.................................................................................................................................................................. |
29 |
6. |
Troubleshooting............................................................................................................................................................... |
30 |
7. |
Technical Specifications ................................................................................................................................................. |
36 |
3EN
1. Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical Appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
SAVE THESE INSTRUCTIONS
1.This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision.
2.Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
3.If there is a drop off in the cleaning area due
to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
4.Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
5.Please make sure your power supply source voltage matches the power voltage marked on the Auto-Empty Station.
6.For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
7.Use only the original rechargeable battery and Auto-Empty Station provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited. For battery information, please refer to Specifications section.
8.Do not use without dust bin and/or filters in place.
9.Do not operate the Appliance in an area where there are lit candles or fragile objects.
10. D o n o t u s e i n e x t re m e l y h o t o r c o l d environments (below -5˚C/23˚F or above 40˚C/104˚F).
EN 4
11.Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
12.Do not operate the Appliance in a room where an infant or child is sleeping.
13.Do not use Appliance on wet surfaces or surfaces with standing water.
14.Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
15.Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
16.Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
17.Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
18.Take care not to damage the power cord. Do not pull on or carry the Appliance or AutoEmpty Station by the power cord, use the power cord as a handle, close a door on the
power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.
19.If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
20.Do not use with a damaged power cord or receptacle. Do not use the Appliance or AutoEmpty Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
21.Do not use with a damaged power cord or receptacle. Do not use the Appliance or AutoEmpty Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
22.Turn OFF the power switch before cleaning or maintaining the Appliance.
23.The plug must be removed from the receptacle before cleaning or maintaining the Auto-Empty Station.
5EN
24.Remove the Appliance from the Auto-Empty Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
25.The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
26.Please dispose of used batteries according to local laws and regulations.
27.Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
28.When not using the Auto-Empty Station for a long period of time, please unplug it.
29.The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
30.The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.
31.If the robot will not be used for a long time, power OFF the robot for storage and unplug the Auto-Empty Station.
32.WARNING: For the purposes of recharging the battery, only use the detachable supply unit CH1918 provided with the Appliance, or CH1822 sold separately as an accessory.
To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
EN 6
To disable Wi-Fi module on DEEBOT, power the robot ON.
Place the robot on the Auto-Empty Station making sure the Charging Contacts on DEEBOT and the Auto-Empty Station Pins make a connection.
Press and hold the AUTO Mode Button on the robot for 20 seconds until DEEBOT emits 3 beeps. To enable Wi-Fi module on DEEBOT, power the robot OFF and then power ON. The WiFi module is turned on when DEEBOT is restarted.
Class II
Short-circuit-proof safety isolating transformer
Switch mode power supply
For indoor use only
Direct current
Alternating current
For EU Countries
For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance
Correct Disposal of this Product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.
7EN
2. Package Contents/2.1 Package Contents
Robot |
Auto-Empty Station |
Power Cord |
Dust Bag |
Instruction Manual |
Side Brushes |
OZMO Pro |
Disposable Cleaning |
High Efficiency Filter and |
|
Oscillating System |
Cloths |
Sponge Filter |
||
|
Note: Figures and illustrations are for reference only and may differ from actual product appearance.
Product design and specifications are subject to changes without notice.
EN 8
2. Package Contents/2.2 Product Diagram
Robot
AUTO Mode Button
TrueDetect 3D
Sensor
TrueMapping
Distance Sensor
RESET Button
Top Cover
Wi-Fi Indicator
Light
Power Switch
Multi-function
Cleaning Tool
Auto-Empty Dust Bin |
|
|
|
Auto-Empty Outlet |
|
|
Sponge Filter |
|
Dust Bin Handle |
|
|
Release Button |
|
|
Anti-collision Bumper |
|
|
Filter Net |
High Efficiency Filter |
|
|
|
|
|
9 |
EN |
Bottom View
Charging Contacts
Carpet Detection
Sensor
Main Brush
Anti-drop Sensors
Main Brush
Release Button
Substitute Module (Pre-installed)
Auto-Empty Station
|
|
Universal Wheel |
|
|
|
Lid Release Button |
|
|
Side Brushes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicator Light |
|||
|
|
Driving Wheels |
|
|
|
|
Infrared Singnal Emitter
Auto-Empty Station Pins
Auto-Empty Inlet
Water Outlet
Anti-drop Sensors
EN 10
Auto-Empty Station (Back) |
Auto-Empty Station (Bottom) |
Power Cord Wrap
Power Cord Port |
Base Screw Socket |
|
Dust Evacuation Tube
Cover Set Screws
Auto-Empty Station (Top) |
Dust Evacuation Tube |
|
+ Tube Cover |
Dust Bag Socket
Dust Evacuation Tube
Blower Cover
11 EN
Power Cord |
OZMO Pro Oscillating System |
|
|
Reservoir |
Water Inlet |
|
|
|
|
|
Reservoir |
|
|
Release Button |
|
Disposable |
|
|
Cleaning Cloth |
|
* Please only attach the Disposable Cleaning Cloth to OZMO Pro.
EN 12
3. Operating and Programming/3.1 Notes Before Cleaning
Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.
During the first use, make sure each room door is open to help DEEBOT fully explore your house.
It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.
Put away objects including cables, cloths and slippers, etc. on the floor to improve the cleaning efficiency.
Before using the product on a rug with tasseled edges, please fold the rug edges under.
Please do not stand in narrow spaces, such as hallways, and make sure not to block the Detection Sensor.
13 EN
3. Operating and Programming/3.2 Quick Start
1 Remove Protective Materials |
2 Assemble Auto-Empty Station |
3 Install Side Brushes
Click
EN 14
3. Operating and Programming/
3.3 Charging DEEBOT
1 Auto-Empty Station Placement
2 Power ON
Note: I = ON, O = OFF.
DEEBOT cannot be charged when being powered OFF.
3 Charge DEEBOT
flashes when DEEBOT is charging. goes out when DEEBOT is fully charged.
6.5
* Before charging DEEBOT, make sure to install the Substitute Module.
15 EN
3. Operating and Programming/3.4 ECOVACS HOME App
To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.
Before you start, make sure that:
•Your mobile phone is connected to a Wi-Fi network.
•The 2.4GHz band wireless signal is enabled on your router.
•The Wi-Fi indicator light on DEEBOT is slowly flashing.
Wi-Fi Indicator Light
|
Slowly flashing |
Disconnected to Wi-Fi or |
|
waiting for Wi-Fi connection |
|
|
|
|
|
Rapidly flashing |
Connecting to Wi-Fi |
|
|
|
|
Solid |
Connected to Wi-Fi |
|
|
|
Tips:
If you have any problems during the Wi-Fi setup process, refer to the
Troubleshooting > Wi-Fi Connection section in this manual.
ECOVACS HOME
EN 16
3. Operating and Programming/3.5 Operating DEEBOT
During the first cleaning, please supervise DEEBOT and assist it should there be a problem.
1 Start
2 Pause
3 Return to Charge
Pressing for 3 seconds to send DEEBOT back to the Auto-Empty Station.
*When Auto-Empty Station is connected to power, DEEBOT automatically returns to the station to charge and empty the Dust Bin as it needs.
Note: The robot’s Control Panel stops glowing after the robot is paused for a few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot.
17 EN
3. Operating and Programming/3.6 OZMO Pro Oscillating System
Note:
1.Install OZMO Pro Oscillating System for floor scrubbing.
2.With electric oscillating mopping up to 480 times per minute, OZMO Pro is applicable for areas of highly concentrated dirt or dust. 3.Before installing OZMO Pro, please make sure the contacts are thoroughly dry.
4.Please avoid using OZMO Pro on the carpet.
1 Remove the Substitute Module |
3 Attach Disposable Cleaning Cloth |
2Add Water
*To prolong the service life of OZMO Pro, it is recommended to use purified water or softened water.
*Do not soak OZMO Pro in water.
* Please only attach the Disposable Cleaning Cloth to OZMO Pro. The Washable/Reusable Microfiber Cleaning
Cloth is not compatible with OZMO Pro. When attaching the Disposable Cleaning Cloth, make sure the fluffy side is attached to the Cleaning Cloth Plate, while the dotted side is faced outward.
EN 18
4 |
Dry Contacts Thoroughly |
6 Start Mopping |
|
5Install OZMO Pro
19 EN
4. Maintenance/4.1 Regular Maintenance
To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:
Robot Part |
Maintenance Frequency |
Replacement Frequency |
|
|
|
|
|
Disposable Cleaning Cloth |
/ |
Replace after each use |
|
|
|
|
|
Dust Bag |
/ |
Dust Bags should be replaced when prompted by |
|
the Indicator Light/ECOVACS HOME App. |
|||
|
|
||
|
|
|
|
Side Brush |
Once every 2 weeks |
Every 3-6 months |
|
|
|
|
|
Main Brush |
Once per week |
Every 6-12 months |
|
|
|
|
|
Sponge Filter/ High Efficiency Filter |
Once per week |
Every 3-6 months |
|
|
|
|
|
TrueDetect 3D Sensor |
|
|
|
Universal Wheel |
|
|
|
Anti-Drop Sensors |
Once per week |
/ |
|
Bumper |
|||
|
|
||
Charging Contacts |
|
|
|
Auto-Empty Station Pins |
|
|
|
|
|
|
Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Auto-Empty Station. A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.
Note: ECOVACS manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.
EN 20
4. Maintenance/4.2 OZMO Pro Oscillating System
1 Remove OZMO Pro |
3 Disposable Cleaning Cloth |
* After DEEBOT finishes mopping, please empty the reservoir.
2Wipe OZMO Pro Clean
*Wipe OZMO Pro Oscillating System with a clean, dry cloth. Do not soak into water.
21 EN
4. Maintenance/4.3 Auto-Empty Dust Bin and Filters
Dust Bin |
Filter |
|
1 |
1 |
4 |
2 |
2 |
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
3 |
EN 22
4. Maintenance/4.4 Main Brush and Side Brushes
Main Brush |
|
Side Brushes |
|
|
|
23 EN
4. Maintenance/4.5 Auto-Empty Station
Note: Before performing cleaning and maintenance on Auto-Empty Station, unplug it first.
* For a proper maintenance, wipe with a clean dry cloth, and avoid using any detergent or cleaning spray.
Auto-Empty Station Pins |
Infrared Signal Emitter |
Dust Bag
1 Dispose the Dust Bag
* The Dust Bag will be sealed by the handle so the dust will not leak.
EN 24
2 |
Clean the Blower Cover |
4 |
Close the Dust Container Lid |
|
|
3 Install the Dust Bag
25 EN
Dust Evacuation Tube
Unscrew the Dust Evacuation |
Uninstall the Dust Evacuation |
Clean the Dust Evacuation Tube |
|||||||||||||||||||
|
|
|
|
|
|
Tube Cover |
Tube Cover |
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EN 26
4. Maintenance/4.6 Other Components
Note: Before cleaning the robot’s Charging Contacts and Auto-Empty Station Pins, turn the robot OFF and unplug the Auto-Empty Station.
1 |
4 |
2
5
3
27 EN
6 |
4. Maintenance/4.6 Storage |
|
If DEEBOT will not be used for a while, fully charge DEEBOT and power OFF before storage. Charge DEEBOT every 1.5 month to prevent battery drain.
7
Note: When DEEBOT is not cleaning, it is recommended to keep
DEEBOT powered ON and charging.
EN 28
5. Indicator Light
DEEBOT will tell you something is wrong with an indicator light and voice report. More detailed support is available through the ECOVACS HOME App and online website.
Indicator Light |
Scenario |
|
|
|
|
|
The robot is cleaning |
|
AUTO Mode Button glows a solid WHITE |
|
|
The robot is paused while cleaning |
||
|
||
|
|
|
|
The robot is charging |
|
|
|
|
AUTO Mode Button flashes WHITE |
The robot is starting |
|
|
|
|
|
The robot is relocating |
|
|
|
|
AUTO Mode Button glows a solid RED |
The robot has low battery |
|
|
|
|
AUTO Mode Button flashes RED |
The robot has a problem |
|
|
|
29 EN
6. Troubleshooting/6.1Troubleshooting
No. |
Problem |
Possible Causes |
Solutions |
|
|
|
|
|
|
|
|
DEEBOT is not switched ON. |
Switch ON DEEBOT. |
|
|
|
|
|
|
|
|
DEEBOT has not connected to the Auto-Empty |
Be sure that the robot’s Charging Contacts have connected |
|
|
|
Station. |
to the Auto-Empty Station Pins. |
|
|
|
|
|
|
1 |
DEEBOT is not charging. |
The Power Cord is not connected to the Auto- |
Make sure the Power Cord is firmly connected to the Auto- |
|
Empty Station. |
Empty Station. |
|||
|
|
|
|
|
|
|
The Auto-Empty Station is not connected to |
Make sure the Auto-Empty Station is connected to the |
|
|
|
the power supply. |
power supply. |
|
|
|
|
|
|
|
|
The battery is completely discharged. |
Please contact Customer Care for help. |
|
|
|
|
|
|
|
|
The Auto-Empty Station is not correctly |
Refer to section 3.2 to correctly place the Auto-Empty |
|
|
|
placed. |
Station. |
|
|
|
The Auto-Empty Station is not correctly |
Make sure the Auto-Empty Station is correctly connected. |
|
|
|
connected. |
||
|
|
|
||
|
DEEBOT cannot return to the |
The Auto-Empty Station is manually moved |
It is suggested not to move the Auto-Empty Station during |
|
2 |
during the cleaning. |
the cleaning. |
||
Auto-Empty Station. |
||||
|
|
|||
|
DEEBOT is paused for more than 90 minutes. |
It is suggested not to pause DEEBOT for more than 90 |
||
|
|
|||
|
|
minutes. |
||
|
|
|
||
|
|
|
|
|
|
|
DEEBOT did not start cleaning from the Auto- |
Make sure DEEBOT starts cleaning from the Auto-Empty |
|
|
|
Empty Station. |
Station. |
|
|
|
|
|
|
|
|
DEEBOT is tangled with something on the |
DEEBOT will try various ways to free itself. If it is |
|
|
|
floor (electrical wires, curtains, carpet fringing, |
||
|
DEEBOT gets stuck while |
unsuccessful, manually remove the obstacles and restart. |
||
3 |
working and stops. |
etc.). |
|
|
|
DEEBOT might be stuck under furniture with |
Please set a physical barrier, or set a Virtual Boundary in |
||
|
|
|||
|
|
an entrance of similar height. |
the ECOVACS HOME App. |
|
|
|
|
|
EN 30