Daewoo DTA-1420MT, DTA-1420MP, DTA-1420MTF, DTA-1420MTFB, DTA-1420MZ Instruction Manual

...

0 (0)

INSTRUCTION MANUAL

COLOR TELEVISION

DTA-1420 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-14D4 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-14D7 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-20D7 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-21A7 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-21D7 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-2131 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-2132 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-2134 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-21A8 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-21S7 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) DTA-21S8 (ME/MT/MTF/MTFB/MP/MZ/MZF/MZFB/TP/P/T/TF/Z/ZF) KR21S7N

TABLE OF CONTENTS

SAFEGUARDS 2

INTRODUCTION

FEATURES 3

INSTALLATION 3

IDENTIFICATION OF CONTROLS 4

REMOTE CONTROL 4

SWICTHING THE SET ON/OFF 5

TUNING THE TV CHANNELS 5

CONVENIENT PICTURE CONTROL 8

PICTURE FORMAT CONTROL 9

CONVENIENT SOUND CONTROL 10

USING OTHER MENUS 12

WATCHING PICTURE IN PICTURE (OPTION) 15

CONNECTING THE EXTERNAL EQUIPMENT 16

CONNECTING WITH OTHER EQUIPMENT 17

CONNECTING DVD PLAYER/BS RECEIVER(OPTION) 18

THE OTHELLO GAME

TELETEXT(OPTION)

SPECIFICATION 22

SAFEGUARDS

To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the future reference.

M Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or

splashing water).

No objects filled with liquids, such as vases, shall be placed on the apparatus.

M Heat : No naked flame sources, such as candles, should be placed on the apparatus.

M Ventilation : The ventilation should not be impeded by covering the ventilation openings with items, such

as newspapers, table-clothes, curtains, etc. Accidental contact with high voltage components could result in electric shock. Never place the set in a confined space such as a bookcase or built-in cabinet, unless proper ventilation is provided. The set requires minimum distances around the apparatus for sufficient ventilation.

M Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation openings.

M Lightning Striking : You should disconnect your set from the main and the aerial system during thunderstorms.

M Cleaning : Unplug the set from the main before cleaning. Do not use liquid cleaners of aerosol cleaners. Use only a

lightly dampened soft cloth.

M Do not place liquids including flower vases and vessels filled with chemicals or water, etc. on the top of the unit.

Keep the inside of the unit free from foreign objects such as hairpin. If hazardous objects fall inside of the unit, unplug it immediately and call a qualified technician for removal.

M When you don’t use the set for an extended period during vacation or other occasions, always make sure of

switching off the MAIN POWER(ON/OFF) SWITCH of the TV set.

M Do not place this television equipment on an unstable cart, stand, or table.

The television equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Use only with a cart or stand recommend by the manufacture’s instructions, and should use a mounting kit approved by the manufacture.

M When replacement parts are required, be sure the service technician has used replacement parts specified by the

manufacture that have the same characteristics as the original parts. Unauthorized substitutions may result fire, electric shock, or other hazards.

M Upon completion of any service or repairs to the set, ask the service (as specified by the manufacture) to

determine that the set is in safe operating condition.

M If anything goes wrong, don’t try any fix it yourself, get a qualified service agent to look at it.

M When Install the TV set, make the gap at least 10cm from the wall(at back, bottom, top and side of the TV set).

M The appliance is not intended for use by young children or infirm persons without supervision;

M Young children should be supervised to ensure that they do not play with the appliance.

NOTE

If the receiver is moved or placed in a different direction, the MAIN POWER (ON/OFF) SWITCH must be switched off for at least 15 minutes in order to take out a colour stain on the screen.

Features

INTRODUCTION

Installation

16:9 / ZOOM Screen : You can select a desired 16:9(or ZOOM) screen mode for movies

as well as the most 4:3 picture mode.

Selectable picture and selectable sound : Allows one-touch selection of your favorite picture

quality and tone quality.

On-timer: Turns on the TV automatically at a preset time.

Picture-In-Picture (Option)

Teletext(Option)

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for at least 15minutes in order to take out a colour stain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover. Insert the batteries supplied(two 1.5V, type AAA).

Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.

Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most important.

If you are located in a relatively strong area, you will be able to use the indoor aerial.

When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with 110-250V AC, 50/60Hz.

Identification of controls

Remote control

TV MODE

POWER SOUND MUTE NUMBER 0..9 TV / AV NORMAL RECALL MENU PROGRAM UP (CURSOR UP) VOLUME DOWN (CURSOR LEFT) VOLUME UP (CURSOR RIGHT) PROGRAM DOWN (CURSOR DOWN) MODE OK / PRESET PIP ON PIP PICTURE SWAP/FREEZE PIP POSITION PIP PICTURE SOURCE

TV TELETEXT

PIP PICTURE SIZE SLEEP ZOOM 3D (SOUND EFFECT)

TELETEXT MODE

POWER SOUND MUTE NUMBER 0..9

VOL/BRIGHT MENU SELECTION PAGE UP VOL / BRIGHT DOWN VOL / BRIGHT UP PAGE DOWN

INDEX RED GREEN YELLOW CYAN CANCEL PAGE HOLD TELETEXT TV REVEAL SUBPAGE HEIGHT

REAR

SCART(OPTION)

FRONT

(OPTION)

SIDE

(OPTION)

AUT O SETUP SYSTEM

1.Press the MENU button to select INSTALL.

2.Press the PRy/x buttons and then select INSTALL.

3.Press the C/B buttons.

4.Select AUTO SETUP with the PR y/x buttons. Press the C/B buttons. Select SOUND SYSTEM(BG, DK, I, M(OPTION))

with the y/x buttons.

Press and hold for more than 1 second the C/B buttons to

start AUTO SETUP.

5.Please wait until the EDIT menu appears.

TUNING THE TV CHANNELS

SWITCHING THE SET ON AND OFF

OPTION

Switching On

Switch the set on with the ON/OFF button in front of the receiver TV. The set will be turn on. If not, press either : - PR UP or DOWN button on the side of set - or POWER button or the PR UP/DOWN button or one of the NUMBER button 0..9 on the remote controller. The STAND-BY INDICATOR turns “RED” to “OFF”, then picture will appear on the screen.

Switching Off

Press POWER button on the remote controller to return the set to its stand-by mode. The STAND-BY INDICATOR will illuminate. If you don't use the set for extended period of time, turn it off with ON/OFF button in front of the receiver.

Auto-power-off

If broadcasting signal is not present for 30 minutes, the TV will automatically turn off after about 30 minutes. However, if the Sleep time is operating, it takes precedence.

This Auto-Power-Off function does not operate in the “GAME” mode.

EDIT

1.Press the menu button to select INSTALL.

2.Press the PR y/x buttons and then select INSTALL.

3. Press the C/B buttons.

4.Select EDIT with the PR y/x buttons and press the C/B buttons to

start EDIT.

5.DELETE PROGRAM POSITION DATA.

Position the blue-line to the program to delete with the PR y/x buttons and the DELETE(YELLOW) button.

6.CHANGING THE ORDER OF THE CHANNELS

Position the blue-line to a program to move with the PR y/x buttons and the MOVE(GREEN) button.

Press the PR y/x buttons to position the yellow-line to another program to move. By pressing the MOVE(GREEN) button again, selected two program will be moved.

7.SKIPPING THE CHANNELS

You can select SKIP with the SKIP(RED) button in EDIT mode then press the PR y/x buttons to skip the desired program. A program marked with skip “ ” is skipped when changing program using the program UP/DOWN(on normal operation).

Press the PR y/x buttons to select program number you want. The screen will change according to the selected program number.

8. SOUND SYSTEM

When the sound is abnormal, select SOUND with the

C/B buttons. Select the correct sound system with the y/x buttons.

OPTION

MANUAL CHANNEL TUNING AND FINE TUNING

1.Manual Channel Tuning

Choose a starting point

- Select with “Program” the program from which you want to start manual tuning.

Then the program number, the frequency, the name and the program number of this program are displayed in the install menu.

2.Channel searching

- Select the “Freqency” function.

- Press, and hold for more than 3 seconds, the remote control C/B

buttons to start up [down] manual tuning.

- Searching will stop automatically at the next channel found (to stop

tuning, press the remote control MENU button.)

Note : You can directly locate a program by entering the data into the

“Program” or the “Frequency” function.

3.Perform fine tuning

- If you are unable to get a good picture or reasonable quality sound

due to poor reception, it is possible to perform fine tuning.

- Select the “Frequency” function.

- Press, for less than 3 seconds, the remote control C/B buttons to

perform up [down] fine tuning in steps of 0.05MHz (50KHz)

4. Store program in memory

- Select the “Store to” function.

- Enter the program number you want to store to either by using the

remote control C/B buttons, or directly by using the remote control NUMBER 0...9 buttons.

- Select the "STORE" with the y/x Buttons. Press the C/B buttons to confirm.

Remarks : This function can also be used if you want to copy a program

already memorised to another program number.

ENTER A STATION NAME

It is possible to enter your own choice of name for each program. You can change an existing name, or enter a name where none exists. If none exists “-----” will be shown in the Install menu, and program status display.

- Select the “NAME” function.

- Select one of the 5 character positions by using the remote control

C/B buttons to move the cursor.

- Then use the PR y/x buttons to select the desired character for that

position.

- Repeat the last two instructions for other positions, as desired.

TO SELECT THE PICTURE MODE

1.press the MENU button to select the PICTURE and then to be displayed on the right appearance.

Press the PR y/x buttons and then select MODE. BY pressing the C/B buttons, the following three modes change cyclically.

2. You can select the BRIGHTNESS, CONTRAST, COLOUR, and SHARPNESS with the PR y/x buttons.

Select the desired item with the PR y/x buttons and press with the C/B buttons to adjust the level.

3. If the NTSC standard is detected (eg from VHS player connected to AV), then TINT will available.

Otherwise TINT will be displayed, but not selectable.

4. NOISE REDUCTION feature can be activated or not.

CONVENIENT PICTURE CONTROL

You can select the picture quality instantly.

MODE Picture Quality

NORMAL hard picture

MILD soft picture

FAVOURITE adjustable

Item

Pressing

BRIGHTNESS darker lighter

CONTRAST weaker stronger

COLOUR paler deeper

SHARPNESS softer sharper

TO SELECT THE WIDE OR ZOOM SCREEN

By pressing the ZOOM button in remote control, the following three modes change cyclically.

1. Or press the MENU button.

2.Press the PR y/x buttons and then select FEATURES.

3. Press the C/B buttons.

4. And then to be displayed on the right appearance.

Select the ZOOM with the PR y/x buttons.

5. By pressing the C/B buttons, the following three mode

change cyclically.

PICTURE FORMAT CONTROL

4:3 16:9 ZOOM

OPTION

+ 21 hidden pages