Black & Decker BD200MTBR, BD200MTB, BD200MT, BD200TMT User Manual

Oscillating Multi-Tool

INSTRUCTION MANUAL

Catalog Number	Catalog Number
BD200TMT	BD200MT TYPE 2
2.0 Amp	2.5 Amp

Thank you for choosing Black & Decker! To register your new product go to www.BlackandDecker.com/NewOwner

Please read before returning this product for any reason.

If you have a question or experience a problem with your Black & Decker purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent. Please have the catalog number available when you call.

Save this manual for future reference.

VEA EL ESPA—OL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially haz­ardous­ situation which, if not avoided, may result in minor or mod­erate­ injury.

NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

General Safety Rules

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1)Work Area Safety

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

3)Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

2

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

•Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

•Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

•Disconnect power before using tool near live wires or where there may be hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.” Always check

for hidden wiring, gas lines, or other utilities before performing any material cutting or removal operations with the tool.

•Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury.

•Do not operate this tool for long periods of time. Vibration caused by the operating action of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide extra cushion, take frequent rest periods, and limit daily time of use.

3

•Always hold the tool firmly with both hands for maximum control. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

•Do not restart the cutting operation in the workpiece. Let the tool reach full speed and carefully re-enter the cut.

•Do not “jam” the cut-off saw blade or apply excessive pressure. Do not attempt to make an excessive depth of cut.

•Keep your hands away from cutting area. Do not reach under the material being cut.

•Do not use dull or damaged blades. Bent blade can break easily or cause kickback. Exercise extreme caution when handling the accessories. The accessories are very sharp. Wear protective gloves when changing cutting accessories. Accessories become hot after prolonged usage.

•Before scraping, check workpiece for nails. If there are nails, either remove them or set them well below intended finished surface. Striking a nail with accessory edge could cause the tool to jump.

•Do not wet sand with this tool. Liquids entering the motor housing are an electrical shock hazard.

•Never work in area which is soaked with a liquid, such as a solvent or water, or dampened such as newly applied wallpaper. There is an electrical shock hazard when working in such conditions with a power tool and heating of the liquid caused by scraping action may cause harmful vapors to be emitted from workpiece.

•Do not use sandpaper intended for larger sanding pads. Larger sandpaper will extend beyond the sanding pad causing snagging, tearing of the paper or kick-back. Extra paper extending beyond the sanding pad can also cause serious lacerations.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CPA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of California to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise

from this product may contribute to hearing loss.

Precautions To Take When Sanding Paint

1. Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling the contaminated dust. The greatest danger of lead poisoning is to children and pregnant women.

2. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis, we recommend the following precautions when sanding any paint:

PERSONAL SAFETY

1. No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed.

4

2.A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily or whenever the wearer has difficulty breathing. See your local hardware store for the proper N.I.O.S.H. approved dust mask.

3.NO EATING, DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles. Workers should wash and clean up BEFORE eating, drinking or smoking. Articles of food, drink, or smoking should not be left in the work area where dust would settle on them.

ENVIRONMENTAL SAFETY

1. Paint should be removed in such a manner as to minimize the amount of dust generated.

2. Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils thickness.

3. Sanding should be done in a manner to reduce tracking of paint dust outside the work area.

Cleaning and Disposal

1. All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding project. Vacuum filter bags should be changed frequently.

2. Plastic drop cloths should be gathered up and disposed of along with any dust chips or other removal debris. They should be placed in sealed refuse receptacles and disposed of through regular trash pick-up procedures. During clean up, children and pregnant women should be kept away from the immediate work area.

3. All toys, washable furniture and utensils used by children should be washed thoroughly before being used again.

Symbols

•The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V..................				volts	A...................				amperes
Hz................				hertz	W..................				watts
min...............				minutes	no .................				alternating current
				direct current.............					no load speed
				Class I Construction					earthing terminal
			.................					..................
				(grounded)				.................	safety alert symbol
			.................	Class II Construction	opm...............				oscillations per minute
				(double insulated)

•When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

			Minimum Gauge for Cord Sets
Volts			0-25	Total Length of Cord in Feet
120V				26-50	51-100	101-150
240V			(0-7,6m)	(7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
			0-50	51-100	101-200	201-300
			(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating				American Wire Gauge
More		Not more
Than	-	Than	18	16	16	14
0		6
6	-	10	18	16	14	12
10	-	12	16	16	14	12
12	-	16	14	12	Not Recommended

5

Intended Use

Detail Sanding

Sanding in extremely tight areas otherwise difficult to reach and require hand sanding.

Select a high oscillating frequency. Sand with continuous motion and light pressure.

Applying excessive pressure does not increase material removal; but will prematurely wear sanding sheets.

Flush Cutting

Remove excess wood from door jamb, window sill and/or toe kick. Removing excess copper or PVC pipe.

Removal Work

Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.

Removal of Excess Materials

Tile grout, plaster, mortar splatters, concrete on tiles, sills.

Preparation of Surfaces

New floors and tiles.

SAVE THESE INSTRUCTIONS

	Functional Description	BD200MT Only
	A) On/Off switch
		G) Tool-free release
	B) Variable speed dial	H) Adaptor plate
	C) Power cord	I)	Press board
	D) Clamp washer	J)	O-ring
	E) Bolt
	F) Hex wrench

BD200TMT

A	B

C

D E F

BD200MT	B
	A

C

H I J G

Assembly (BD200TMT)

WARNING: Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

WARNING: Risk of lacerations or burns. Do not touch workpiece or blade immediately after operating the tool. They can become very hot. Handle carefully. Always allow workpiece and accessories to cool before handling.

6

Installing/Removing Accessories

BD200TMT Oscillating Tool is specifically designed to work with Black & Decker accessories, but is also compatible with many manufacturers’ accessories. If unsure, confirm with the specific manufacturer that their accessory is compatible.

CAUTION: To avoid injury, do not use any accessory for an application where the bolt and clamp washer may fail to hold the accessory.

CAUTION: Read and follow all manufacturers’ safety warnings for any accessories used with this tool.

CAUTION: To avoid injury, ensure adapter and accessory are securely tightened.

• Clean any residual debris from the tool shaft and the accessory holder.

• Position the accessory so the working edge is away from the tool as shown in Figure 1.

• Place the accessory on the front of the oscillating tool, ensuring the accessory fully engages the pins.

• Place the washer (D) over the accessory with the grooved side covering the pins.

• Slide the bolt (E) through the washer into the oscillating tool and tighten with the hex wrench (F).

1

D

E

F

•To remove, loosen the bolt and washer with the hex wrench and remove the accessory.

•To attach the sanding platen, loosen the bolt enough to slide the platen under the washer (D), ensuring the platen fully engages the pins. Slide the hex wrench (F) through the hole in the platen and tighten the bolt (E).

Assembly (BD200MT)

WARNING: Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

WARNING: Risk of lacerations or burns. Do not touch workpiece or blade immediately after operating the tool. They can become very hot. Handle carefully. Always allow workpiece and accessories to cool before handling.

Installing/Removing Accessories

The BD200MT features an exclusive tool-free accessory changing system. This allows for faster accessory changes without the need for wrenches or hex keys like other oscillating tool systems.

• Grasp the tool and squeeze the accessory clamping lever (Figure 2).

• Clean any residual debris from the tool shaft and the accessory holder.

• Position the accessory so the working edge is away from the tool as shown in Figure 3.

• Slide the accessory between the shaft and the accessory holder making sure the accessory fully engages the pins on the holder and is flush with the shaft.

• Release the accessory clamp lever.

2

3

7

Universal Adaptor Kit

An accessory adapter kit is provided with BD200MT. The adapter is compatible with many manufacturers’ accessories, but if unsure, confirm with the specific manufacturer that their accessory is compatible.

CAUTION: To avoid injury, do not use any accessory for an application where the adaptor may fail to hold the accessory.

CAUTION: Read and follow all manufacturers’ safety warnings for any accessories used with this tool.

CAUTION: To avoid injury, ensure adapter and accessory are securely tightened.

CAUTION: Do not use this adaptor with Black and Decker accessories. Attach Black and Decker accessories with the tool-free release (G) according to the instructions in this instruction manual.

• To attach, place adaptor plate (H) onto the oscillating tool attachment with protrusions facing up as shown in Figure 4.

• Place accessory on top of adaptor plate and fasten with the bolt (E), press board (I) and o-ring (J). Then, tighten with the hex wrench as shown in Figure 5.

4

H

Protrusion

5
	J
E	I

•To remove, loosen the bolt and washer with the hex wrench, then remove the accessory and adapter.

Installing/Removing Accessories (BD200TMT

& BD200MT)

•Some accessories, such as scrapers and blades can be mounted at an angle if required as shown in Figure 6.

•A triangle shaped base, or platen, uses a hook and loop adhesion system to attach the sanding sheets.

•Clean any residual debris from the tool shaft and the accessory holder.

•Position the accessory so the working edge is away from the tool as shown in Figure 7.

•Place the sanding platen on the front of the oscillating tool, ensuring the accessory fully engages the pins as described under “Assembly.”

•Align the edges on the sanding sheet, with the edge of the sanding platen and press the sanding sheet onto the platen as shown in Figure 7.

•Firmly press the base with the sanding sheet attached against a flat surface and briefly switch the tool on. This provides for good adhesion between the platen and the sanding sheet and also helps to prevent premature wear.

•When the tip of the sanding sheet becomes worn, detach the sheet from the platen, rotate and reapply as shown in Figure 7.

6

7

8

Operation

Switch

CAUTION: Be sure switch is fully OFF before plugging in the power cord.

• Plug in power cord.

• To turn the tool ON, hold it as shown in Figure 8 and push the slide switch forward.

• To turn the tool OFF, push the slide switch backward.

Variable Speed Dial

To operate the tool, select the speed setting you wish with the speed dial, shown in Figure 9, and slide the ON/OFF switch forward. The speed setting can be adjusted either with the tool on or off

CAUTION: Because the oscillating tool has a separate speed dial for setting the speed (1-6), the tool will start at the speed where the speed dial is set.

8

9

B

The numbered positions,1 through 6 inscribed on the variable speed dial, do not indicate any precise speed but are good reference points. The higher the number, the higher the tool speed.

The approximate speed at each setting is:
SPEED SETTING	1	2	3	4	5	6
Oscillations per minute	10,000	12,000	14,000	16,000	18,000	20,000
(Actual oscillations per minute on your tool may vary.)

Be sure to select the proper speed for your oscillating tool operation. In general, use lower speeds (1-3) for cutting metal and PVC or plastic materials and use higher speeds (4-6) for sanding, removal & wood cutting applications. For paint, varnish, or other finish removal, use the lowest speed setting (1) to get the maximum life from the sanding sheet.

If in doubt about the proper speed for your operation, test the performance at low speed settings and gradually increase until a comfortable speed is found.

Helpful Hints

•Always ensure the workpiece is firmly held or clamped to prevent movement. Any movement of the material may affect the quality of the cutting or sanding finish.

•Do not start sanding without having the sandpaper attached to sanding platen.

•Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for the finishing surfaces. If necessary, first make a test run on scrap material.

•Do not allow the sandpaper to wear away, it will damage the sanding pad.

•Excessive force will reduce the working efficiency and cause motor overload. Replacing the accessory regularly will maintain optimum working efficiency.

•If the tool overheats, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep the blade sharp.

9

Troubleshooting

Problem	Possible Cause	Possible Solution
• Unit will not start.	• Cord not plugged in.	• Plug tool into an
working	• Circuit fuse is blown.	outlet.
		• Replace circuit fuse. (If
		the product repeatedly
		causes the circuit fuse to
		blow, discontinue use
		immediately and have
		it serviced at a Black &
		Decker service center or
	• Circuit breaker is tripped.	authorized servicer.)
		• Reset circuit breaker.
		(If the product
		repeatedly causes the
		circuit breaker to trip,
		discontinue use
		immediately and have
		it serviced at a Black &
		Decker service center or
	• Cord or switch is damaged.	authorized servicer.)
		• Have cord or switch
		replaced at a Black &
		Decker service center or
		authorized servicer.)

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

Accessories

Recommended accessories for use with your tool are listed on page 12 and 13 and are available from your local dealer or authorized service center. In addition to Black & Decker ® accessories, your oscillating tool will also accept Porter Cable ® and Stanley FatMax ® oscillating tool accessories. If you need assistance regarding accessories, please call: 1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

Service Information

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under “Tools—Electric” or call: 1-800-544-6986 or visit www.blackanddecker.com

10

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under “Tools-Electric” in the yellow pages of the phone directory and on our website www.blackanddecker.com.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for warranty information. free warning label replacement: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

	Imported by:	See ‘Tools-Electric’
	Black & Decker (U.S.) Inc.,
		– Yellow Pages –
	701 E. Joppa Rd.
		for Service & Sales
	Towson, MD 21286 U.S.A.

11

SANDING & REMOVAL ACCESSORIES
Part #	Accessory	Recommended Materials	Typical Applications
BDA1209	Sanding Base / Platen		To be used with appropriate sandpaper sheets
			(see below)
BDA1210	Wood Removal	Wood	Finishing/Detail sanding of wood (60, 120, 240 grit)
	Sandpaper

12

				BDA1211 Paint & Finish Removal		Wood, Metal, Plastic and other	Finishing/Detail sanding paint & other finishes.
					Sandpaper	finished materials	Rust removal (80, 120, 240 grit).
				BDA1216	Rigid Scraper Blade	Tough materials, adhesive,	Removing paint, carpet, adhesive tile and
						layers of paint and varnish	vinyl flooring.
				BDA1220	Flexible Scraper Blade	Soft materials, caulk,	Any soft material removal such as old caulk around
						adhesive, tape, peeling paint	baths and sinks.
				BDA1218	Grout Removal Blade	Grout, plaster, other masonry	Removing grout between tiles, removing thinset
						surfaces	beneath tiles, cutting abrasive materials.
				BDA1221	Carbide Rasp	Grout, plaster, other masonry	Removing remaining grout and thinset in tile
						surfaces	removal. Aggressive removal of hard and soft
							materials.

CUTTING ACCESSORIES
Part #	Accessory	Recommended Materials	Typical Applications
BDA1212	1” Precision Wood	Wood, PVC & plastic, Drywall	Aggressive cuts for larger jobs. Flush cutting door
	Plunge Cut Blade		jambs, molding and flooring.
BDA1214	1” Wood Plunge Cut	Wood, PVC & plastic, Drywall	Wood plunge cutting. Finer cuts for clean and
	Blade		flush cut paths.
BDA1215	1” Wood-Metal Blade	Wood, PVC & plastic, Drywall,	Wood plunge cutting. Finer cuts for clean and
		Hardwoods, Metal	flush cut paths. Trimming finishing nails. Cutting
			copper pipe.

13

BDA1219 3/8” Wood Plunge Cut	Wood, PVC & plastic, Drywall	Small, fine and controlled cuts. Good for small
Blade		areas or hobbies and crafts where detail is needed.

	BDA1217 Flush Cut /	Wood, PVC & plastic, Drywall	Drywall and plywood cutouts for vents or outlets.
	Wood-Drywall Blade		Flush cutting of PVC piping. NOTE: Ensure that
			blade is positioned away from oscillating tool when
			installing on the tool.

Outil oscillant polyvalent

mode d’emploi

Numéro de catalogue	Numéro de catalogue
BD200TMT	BD200MT TYPE 2
2.0 Ampère	2.5 Ampère

Merci d’avoir choisi Black & Decker!

Consulter le site Web www.BlackandDecker.com/NewOwner pour enregistrer votre nouveau produit.

à LIRE avant de retourner ce produit pour quelque raison que ce soit : Si des questions ou des problèmes surgissent après l’achat d’un produit

Black & Decker, consulter le site Web www.blackanddecker.com/instantanswers

pour obtenir des réponses instantanément 24 heures par jour.

Si la réponse est introuvable ou en l’absence d’accès à l’Internet, composer le

1 800 544-6986 de 8 h à 17 h HNE, du lundi au vendredi, pour parler avec un agent. Prière d’avoir le numéro de catalogue sous la main lors de l’appel.

Conserver ce manuel pour un usage ultérieur.

14