Beko CXFD 6113 S, CFD 6913 APX, CXFD 6113 W User Manual

0 (0)

CXFD 6113 S CXFD 6113 W CFD 6913 APX

Important information or useful usage tips.

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in a 1st-class manufacturing facility and checked under the most meticulous quality control procedures, will provide you with years of good service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future reference.

This manual

Will help you use your appliance quickly and safely.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product. Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C

A Warning against dangerous conditions for life and property.

B Warning against electric voltage.

1

Your refrigerator

3

2 Warnings

4

Electrical requirements.......................

5

Warning! This appliance must be

 

earthed..............................................

5

Energy saving tips..............................

6

Compliance with WEEE Directive and

Disposing of the Waste Product: .......

6

Compliance with rohs directive:.........

6

Package information..........................

6

3

Installation

7

Points to be considered when re-

 

transporting your refrigerator..............

7

Before operating your refrigerator.......

7

Electric connection.............................

7

Disposing of the packaging................

8

Disposing of your old refrigerator........

8

Placing and Installation.......................

8

Transportation Instructions.................

9

Installation Instructions.......................

9

Replacing The Interior Light Bulb .....

11

Reversing The Doors........................

12

4 Before operating

15

Final Check......................................

15

5 Using your refrigerator 16

Temperature Control And

 

Adjustment.......................................

16

Total Fridge Freezer Guard...............

16

Quick Drink Chill Alarm.....................

17

Door Open Alarm.............................

18

Suggested Arrangement Of Food In

The Fridge/Freezer...........................

19

Storing Frozen Food.........................

20

Freezing Fresh Food.........................

20

Making Ice Cubes............................

20

Defrosting........................................

21

Fridge Fan ......................................

21

Water Dispenser...............................

22

*optional...........................................

22

6 Maintenance & Care

24

Protection of plastic surfaces ..........

24

7 Do’s and Don’ts

25

Problem Solving...............................

26

2 EN

Beko CXFD 6113 S, CFD 6913 APX, CXFD 6113 W User Manual

1 Your refrigerator

Congratulations on your choice a BEKO quality Appliance which has been designed to give you service for many years.

 

1

13

 

 

 

2

14

 

3

 

 

4

13

 

5

 

17

4

15

 

 

4

13

 

6

 

 

7

 

 

16

 

 

8

13

 

 

 

9

19

 

 

 

10

 

 

11

 

 

11

 

18

 

 

 

11

 

 

12

 

1.

Thermostat

10.Freezer Fan

2.

Interior Light

11.Fast-freeze compartment

3.

Fridge Fan

12.Adjustable front feet

4.

Wine rack

13.Fridge compartment door shelves

5.

Adjustable body shelves

14.Egg tray

6.

Defrost water collection channel -

15.Stored water dispenser

7.

Drain tube

16.Superfresh zone(Chill Compartment)

Crisper cover

17.Fridge compartment

8.

Crisper

18.Freezer compartment

9.

Icebank tray

19.Handles (to be fitted by the user)

3 EN

2 Warnings

Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed.

If transported horizontally leave to stand upright for at least 4

hours before switching on to allow compressor oil to settle

If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

Do not dispose of the appliance on a fire. At BEKO, the care and protection of our environment is an

ongoing commitment. This appliance which is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable

if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

We suggest you contact your local authority for disposal information and facilities available.

See Installation Instructions on on page 8 for information on suitable location.

To obtain the best possible performance and trouble free operation from your appliance it is very important to carefully read these instructions.

On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

Ensure that the plug remains readily accessible. Do not use multiple adapter or extension cable.

Failure to observe these instructions may invalidate your right to free service during the guarantee period.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

We suggest you keep these instructions in a safe place for easy reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

4 EN

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to yourelectricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance be connected to the mains supply via a

Suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need

Replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do

not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A Different Plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug

marked ‘E’ or with the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

GREEN &

 

6mm.

 

YELLOW

 

 

 

OR

 

L

 

GREEN

32mm.

 

 

 

BROWN

6mm.

N

 

OR

 

RED

 

 

22mm.

 

BLUE

 

 

12mm.

OR

6mm.

 

BLACK

 

CORD GRIP

FUSE

FITTED WITH 1362 13A FUSE ALWAYS BS 1362 REPLACEMENT CARTRIDGE FUSE

 

BS FIT

5 EN

Energy saving tips

1.Ensure your appliance is installed in a well ventilated area.

2.Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a

special carrier bag to carry perishable food.

3.Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.

4.Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.

5.Energy consumption of this appliance is measured while freezer compartment is loaded without use of top shelf lid and the drawers except the bottom drawer. It is advised that freezer compartment is

loaded without use of drawers except the bottom drawer in order to achieve maximum loading capacity.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE

Directive (2012/19/EU). This

product bears a classification symbol for

waste electrical and electronic equipment

(WEEE).This product has been manufactured with

high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and

other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Compliance with rohs directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

6 EN

3

Installation

 

 

 

 

 

 

 

 

B

 

 

 

3. Clean the interior of the refrigerator as

Please remember that the

 

 

recommended in the “Maintenance

 

manufacturer shall not be held liable if

 

the information given in the instruction

and cleaning” section.

 

manual is not observed.

 

 

4. Plug the refrigerator into the wall

Points to be considered

 

 

outlet. When the fridge door is open,

 

 

the fridge compartment interior light

when re-transporting your

 

 

 

 

will come on.

refrigerator

 

 

 

 

5. You will hear a noise as the

 

 

 

 

1. Your refrigerator must be

 

 

compressor starts up. The liquid and

 

emptied and cleaned prior to any

 

 

gases sealed within the refrigeration

 

transportation.

 

 

system may also give rise to noise,

2. Shelves, accessories, crisper and etc.

even if the compressor is not running

 

in your refrigerator must be fastened

and this is quite normal.

 

securely by adhesive tape against any

6. Front edges of the refrigerator may

 

jolt before repackaging.

 

 

feel warm. This is normal. These

3. Packaging must be adequate and

 

 

areas are designed to be warm to

 

the rules of transportation printed on

avoid condensation

 

the package must be followed.

 

 

Electric connection

Please do not forget…

 

 

Connect your product to a grounded

Every recycled material is an

 

 

 

 

socket which is being protected by a

 

indispensable source for the nature

 

 

 

 

 

fuse with the appropriate capacity.

 

and for our national resources.

 

 

 

 

 

Important:

If you wish to contribute to recycling

 

 

 

the packaging materials, you can

 

 

• The connection must be in

 

get further information from the

 

 

compliance with national regulations.

 

environmental bodies or local

 

 

• The power cable plug must be easily

 

authorities.

 

 

accessible after installation.

Before operating your

 

 

• The specified voltage must be equal

refrigerator

 

 

to your mains voltage.

Before starting to use your refrigerator

 

 

• Extension cables and multiway plugs

 

 

must not be used for connection.

 

check the following:

 

 

BA damaged power cable must be

1. Is the interior of the refrigerator dry

 

 

replaced by a qualified electrician.

 

and can the air circulate freely in the

 

 

 

 

 

BProduct must not be operated before

 

rear of it?

 

 

it is repaired! There is danger of

2. Please install the 2 plastic wedges

 

 

 

 

electric shock!

 

as illustrated in the figure. Plastic

 

 

 

 

 

 

 

wedges will provide the required

 

 

 

 

distance between your refrigerator

 

 

 

 

and the wall in order to allow the air

 

 

 

 

circulation. (The illustrated figure is

 

 

 

 

only an example and does not match

 

 

exactly with your product.)

7

 

EN

 

 

 

 

 

 

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not

dispose of them along with the normal household waste.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.

You may consult your authorised dealer or waste collection center of your municipality about the disposal of your refrigerator.

Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

A If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, carefully remove the doors of your refrigerator and pass it sideways through the door.

1.Install your refrigerator to a place that allows ease of use.

2.Keep your refrigerator away from heat sources, humid places and direct sunlight.

3.There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall. If the floor is covered with a carpet, your product must be elevated 2.5 cm from the floor.

4.Place your refrigerator on an even floor surface to prevent jolts.

5.Do not keep your refrigerator in ambient temperatures under 10°C.

8 EN

Loading...
+ 21 hidden pages