Apple GarageBand 09 User Manual
GarageBand ’09
Getting Started
Includes a tour of the GarageBand
window and step-by-step tutorials
to help you start creating music
and podcasts with GarageBand.
1
Contents
Chapter 1 6 Welcome to GarageBand
6
What You’ll Learn
7
Before You Begin
7
What You Need to Get Started
7
Where to Go for Help
8
Finding Out More
Chapter 2 9 GarageBand at a Glance
10
GarageBand Window
12
Timeline
14
Editor
14
For Real Instrument Tracks
15
For Software Instrument Tracks–Piano Roll View
16
For Software Instrument Tracks–Score View
17
For Podcast and Movie Projects–Marker View
18
Loop Browser
18
Button View
20
Column View
22
Track Info Pane
22
Real Instrument and Software Instrument Tracks
24
Electric Guitar Track
26
Master Track
28
Media Browser
Chapter 3 29 Tutorial 1: Creating and Playing GarageBand Projects
29
Creating a New Project
31
Playing a Project
31
32
32
32
32
33
2
Using the Transport Controls
Moving the Playhead
Using the LCD
Changing the Units of Time
Changing the Playhead Position in the LCD
Changing the Project Tempo, Key, and Time Signature
34
Saving a Project
35
Creating a Magic GarageBand Project
36
36
36
37
Choosing Different Instruments in Magic GarageBand
Shuffling Instruments in Magic GarageBand
Mixing Instruments in Magic GarageBand
Playing and Recording Your Instrument in Magic GarageBand
Chapter 4 40 Tutorial 2: Learning to Play Guitar and Piano
41
Opening a Learn to Play Lesson
41
Choosing Chapters and Subchapters
42
Playing a Lesson
43
Playing Your Instrument with a Lesson
44
Changing the Speed of a Lesson
44
Recording Your Instrument in a Lesson
45
Changing the Mix of a Lesson
47
Customizing the Lesson Window
47
47
48
48
Customizing a Guitar Lesson
Customizing a Piano Lesson
Opening a Learn to Play Lesson in GarageBand
Getting Additional Learn to Play Lessons
Chapter 5 49 Tutorial 3: Recording Vocals and Musical Instruments
49
Adding a Real Instrument Track
51
52
53
53
54
56
57
Adding a Basic Track
Adding an Electric Guitar Track
Getting Ready to Record
Recording a Real Instrument
Recording Multiple Takes with the Cycle Region
Recording on Several Tracks at the Same Time
Tuning Your Guitar in GarageBand
Chapter 6 58 Tutorial 4: Playing and Recording Software Instruments
60
Playing Software Instruments with Musical Typing
61
Playing Software Instruments with the Onscreen
Music Keyboard
62
Getting Ready to Record a Software Instrument
62
Recording a Software Instrument
63
64
64
64
66
69
Merging Software Instrument Recordings
Viewing Note and Chord Names As You Play
Working in Score View
About Score View
Editing Notes in Score View
Changing the Clef Sign
Contents
3
70
Printing Music Notation
Chapter 7 71 Tutorial 5: Adding Apple Loops
72
Searching for Loops to Use in a Project
73
74
75
75
76
76
76
77
77
78
79
79
80
Searching for Loops in Button View
Searching for Loops in Column View
Previewing Loops
Refining Loop Searches
Searching by Name
Showing Loops from a Specific Jam Pack or Folder
Searching by Scale Type
Limiting Searches to Nearby Keys
Marking Loops as Favorites
Adding Loops to the Timeline
Changing Apple Loops in the Same Family
Adding Loops to the Loop Library
Creating Your Own Apple Loops
Chapter 8 81 Tutorial 6: Arranging and Editing Your Music
82
Arranging Basics
82
83
84
84
85
85
87
88
88
89
89
90
91
91
Selecting Regions
Moving Regions
Resizing Regions
Looping Regions
Splitting and Joining Regions
Quickly Rearranging a Project
Editing Your Recordings in the Editor
Renaming Regions
Transposing Regions
Enhancing the Timing of a Real Instrument Track
Enhancing the Timing of a Software Instrument Track
Enhancing the Tuning of a Real Instrument Track
Setting Real Instrument Regions to Keep Their Original Tempo and Pitch
Importing Audio and MIDI Files
Chapter 9 92 Tutorial 7: Mixing and Adding Effects
92
What Is Mixing?
93
Basic Mixing
93
93
94
94
95
4
Setting Track Volume Levels
Setting Track Pan Positions
Setting the Master Volume
Adding a Fade-Out
Using Effects in GarageBand
Contents
95
96
97
98
98
10 0
Types of Effects
Adding Effects to a Track
Turning Effects On and Off
Choosing an Effect Preset
Creating and Saving Effect Presets
Automating Your Mix
Chapter 10 102 Tutorial 8: Creating Podcasts
10 2
Types of Podcasts
10 3
Creating an Audio Podcast
10 3
Creating a Podcast Project
10 3 Recording Narration and Dialogue
10 4 Adding Podcast Sounds
10 5 Importing Media Files with the Media Browser
10 5 Adding Music
10 6 Adding and Editing Markers
10 7 Adding Marker Region Artwork
10 7 Adding a URL
10 7 Adding Chapter Titles
10 8 Deleting Markers
10 8 Adding Episode Artwork
10 8 Editing Artwork
10 8 Editing Episode Information
10 9 Ducking Backing Tracks
11 0 Creating a Video Podcast or Movie Project
11 0 Creating a Video Podcast Project
11 0 Importing a Movie or Video File
11 0 Viewing the Movie
111 Working with the Movie’s Audio Track
111 Adding Audio
111 Adding Markers, Titles, and URLs to a Video Podcast
Chapter 11 112 Tutorial 9: Sharing Your Projects
112 Sharing Music Projects
113 Sharing Podcasts
11 4 Sharing Video Podcasts
11 5 Exporting Projects at the Optimum Loudness
Appendix A 116 Keyboard Shortcuts
Appendix B 120 Connecting Music Equipment to Your Computer
12 0 Connecting a Microphone or Musical Instrument
121 Connecting a Music Keyboard to Your Computer
121 Connecting Other Music Equipment
Contents
5
1 Welcome to GarageBand
1
GarageBand puts a music studio on your computer,
where the band is never late and always plays in tune.
This document gives you useful information and
step-by-step instructions for creating projects with
GarageBand.
With GarageBand, you can record, arrange, and mix your music, and then share it with
the world. GarageBand includes a complete recording studio, a set of pro-quality
instruments and effects, and a large library of prerecorded sounds you can use in your
projects. Whether you’re an experienced musician or you’ve never made music before,
you can create your own songs, podcasts, and ringtones using GarageBand.
6
What You’ll Learn
The following chapters give you a tour of the GarageBand window and an extensive
tutorial to help you start creating your own projects. You’ll learn to do the following:
 Create a new project
 Learn to play guitar or piano
 Add Apple Loops with drum, bass, and other rhythm parts
 Record sound using a microphone
 Play and record an electric guitar
 Play and record the built-in Software Instruments
 Build a song arrangement in the timeline
 Edit your recordings in the editor
 Mix your project and add effects
 Create audio and video podcasts
 Share your project with other iLife applications
There are also appendixes that list keyboard shortcuts and describe how to connect
music equipment to your computer.
Before You Begin
To make it easier to follow the tutorials as you work, print each tutorial before you start.
In many of the tasks shown in this document you need to choose menu commands. In
the tutorials, and in GarageBand Help, menu commands appear like this:
Choose Edit > Join Selected.
The first term after Choose is the name of the menu in the GarageBand menu bar.
The word or phrase following the angle bracket is the command you choose from
that menu.
What You Need to Get Started
All you need to create music with GarageBand is a Mac that meets the system
requirements, as listed in the Read Me file. Optionally, you can use any of the following
equipment to expand your music-making possibilities:
 A microphone to record your voice, an acoustic musical instrument, or other sounds
 An electric musical instrument, such as an electric guitar or bass
 A Universal Serial Bus (USB) or other MIDI-compatible music keyboard to play and
record Software Instruments
 An audio interface to connect microphones and instruments to your computer
 A pair of speakers or monitors to hear the music you create with greater audio
quality
Where to Go for Help
You can access these resources for help as you complete the tutorial:
 Onscreen help: GarageBand comes with a built-in help system. With a GarageBand
project open, choose Help > GarageBand Help. When the help page opens, type a
word or phrase into the search field at the top of the page, or click one of the topic
areas to get detailed instructions for completing specific tasks.
 Video tutorials: A set of online video tutorials is available, demonstrating major
features and tasks you can accomplish with GarageBand. To view the video tutorials,
choose Video Tutorials from the GarageBand Help menu, or go to the tutorial website
at www.apple.com/ilife/tutorials/#garageband.
 Help tags: Help tags describe the functions of buttons, tools, and other onscreen
items. To see a help tag, hold the pointer over an item for a few seconds.
Chapter 1 Welcome to GarageBand 7
Finding Out More
For up-to-date information on GarageBand, including news about new features, user
tips, and a list of supported music equipment, go to the GarageBand website at
www.apple.com/ilife/garageband.
8 Chapter 1 Welcome to GarageBand
2 GarageBand at a Glance
2
This chapter gives you a tour of the GarageBand window.
You’ll learn the names and locations of controls, as well as
their functions.
It’s a good idea to take a look at these pages even if you don’t plan to complete the
tutorials, because knowing the names and functions of the GarageBand controls will
make it easier to find answers to your questions in GarageBand Help. You may find the
descriptions here are enough to get you started working on your own projects.
The GarageBand window includes the timeline, the loop browser, the editor, and the
Track Info pane. You record instruments, arrange regions, and mix your projects in the
timeline; search for loops in the loop browser; and change instruments and effects in
the Track Info pane.
9
GarageBand Window
A
B
C
FD
HGFE
10 Chapter 2 GarageBand at a Glance
A Timeline: Contains the tracks where you record instruments, add loops, and arrange regions.
Also includes the beat ruler, which you use to move the playhead and align items in the timeline.
See “Timeline” on page 12 for a description of the features and controls of the timeline.
B Track headers: The instrument icon and name are shown at the left of each track’s header.
Click the track name to type a new name.
Click the Record Enable button (the red circle) to turn on the track for recording.
Click the Mute button (the speaker icon) to silence the track.
Click the Solo button (the headphone icon) to hear the track by itself.
Click the Lock Track button (the padlock icon) to lock the track.
Click the triangle to show the track’s automation curves.
Drag the pan dial to adjust the pan position of the track (the left-to-right placement in the
stereo field).
Drag the volume slider to adjust the track’s volume. Watch the level meter to see the track’s
volume level as you record and play.
C Zoom slider: Drag the zoom slider to zoom in for a closer view of part of the timeline, or to
zoom out to see more of the timeline.
Add Track and Editor buttons: Click the Add Track button to add a track below the existing
D
tracks in the timeline. Click the Editor button to show or hide the editor.
E Transport controls: Click the Record button to start recording.
Click the Play button to start or stop playback of the project.
Click the Go To Beginning, Rewind, or Fast Forward buttons to move the playhead to different
parts of the project.
Click the Cycle button to turn the cycle region on or off.
F LCD: The LCD has five modes: Time, Measures, Chord, Tuner, and Project. Click the icon at the left
side of the LCD and choose a different mode.
In Time mode, the LCD shows the playhead’s position in absolute time (hours, minutes, seconds,
fractions). Drag or double-click the numerals to move the playhead.
In Measures mode, the LCD shows the playhead’s position in musical time (measures, beats,
ticks). Drag or double-click the numerals to move the playhead.
In Chord mode, you can see chord symbols when you play any Software Instrument.
In Tuner mode, you can tune a guitar in either an Electric Guitar or Real Instrument track.
In Project mode, you can choose a different key and time signature for the project, and change
the project tempo.
G Master volume slider and level meter: Drag the volume slider to adjust the project’s master
volume level. Watch the level meter to see if clipping is occurring before you export a project.
Loop Browser, Track Info, and Media Browser buttons: Click the Loop Browser button to open
H
the loop browser.
Click the Track Info button (with the “i”) to open the Track Info pane.
Click the Media Browser button to open the Media Browser.
Chapter 2 GarageBand at a Glance 11
Timeline
The timeline contains the tracks where you record instruments, add loops, and arrange
regions to build your song arrangement.
D
A
B
C
E
F
G
H
I
12 Chapter 2 GarageBand at a Glance
Beat ruler: Shows the units of time (either beats and measures or minutes and seconds) in the
A
timeline. You can click the beat ruler to move the playhead to any point in the timeline.
Tracks: You record and arrange your music in the tracks in the timeline. You can add tracks and
B
change the instrument and effects for each track.
Master track: You can use the automation curves in the master track to add a fade-in or
C
fade-out, change the tempo, or transpose parts of the project to a different key.
Playhead: Shows the point in the project that is currently playing, or where playback starts
D
when you click the Play button. You can move the playhead to change what part of the project is
playing. Cut and copied items are pasted at the playhead position.
Arrange track: You can add arrange regions to the arrange track to define different sections of a
E
project (such as intro, verse, and chorus), then copy and move the arrange regions to quickly
rearrange your project.
Grid button: Choose a note value for the timeline grid, or choose Automatic to have the value
F
change when you zoom in or out.
Regions: Your recordings and the loops you add to your project appear as regions in the
G
timeline. You can copy and paste regions, loop and resize them, move and transpose them, and
make other changes to build the arrangement of your music.
Automation curve: Add automation curves for volume, pan, and other parameters to a track,
H
including the master track, then add and adjust control points on each curve to automate
mixing and other parameters.
I Playhead Lock button: Click to unlock the playheads in the timeline and the editor, so that they
can show different parts of the project.
Chapter 2 GarageBand at a Glance 13
Editor
The editor is like a microscope showing a close-up view of the regions in a track.
You can edit Real Instrument and Software Instrument regions in the editor.
For Real Instrument Tracks
When you select a Real Instrument track (with a blue header), the editor shows the
waveform of the regions in the track. You can crop, join, move, transpose, and rename
regions in the editor.
A
B
C
D
E
F G IH
A Pitch slider: Drag the slider to transpose the selected region up or down by up to 12 semitones.
B Follow Tempo & Pitch checkbox: Select to have the selected region follow the project tempo
and key. The checkbox is visible only when a region on the track is selected.
C Enhance Tuning slider and checkbox: Drag right to increase the amount of tuning
enhancement, or drag left to lower the amount. The “Limit to Key” checkbox limits tuning
enhancement to notes in the project key.
D Enhance Timing slider and pop-up menu: Drag right to increase the amount of timing
enhancement, or drag left to lower the amount. Choose the note value to use as the basis for
timing enhancement from the pop-up menu.
E Zoom slider: Drag to zoom in for a closer view or to zoom out to see more of the track or
selected region. Zooming in the editor is independent of the timeline.
F Region name field: Double-click the region name and type a new name.
G Play region button: Click to play the selected region.
H Waveform display: Shows the waveform of the regions in the track.
I Beat ruler: Shows beats and measures for the area visible in the editor. Click the Grid button to
choose the note value for the beat ruler in the editor.
14 Chapter 2 GarageBand at a Glance
For Software Instrument Tracks–Piano Roll View
When you select a Software Instrument track (with a green header), the editor shows a
graphic “piano roll” display of the track or selected region. You can edit individual notes
in Software Instrument regions, fix the timing of notes, and transpose and rename
regions. You can also show and edit controller data for pitch bend, a modulation wheel,
or a sustain pedal, recorded when you play your music keyboard.
A
B
C
D
E
F
H I J
G
A Piano Roll/Score buttons: Click to change the editor to piano roll (graphic) view or score view.
B View pop-up menu: Choose whether to show notes or controller data in the editor.
C Pitch slider: Drag the slider to transpose the selected Software Instrument region up or down
by up to 36 semitones. The Pitch slider is available only when a region on the track is selected.
D Velocity slider: Drag the slider to change the velocity of selected notes. A note’s velocity reflects
how hard the key is pressed when you play the note. The Velocity slider is available only when a
region on the track is selected.
E Enhance Timing slider and pop-up menu: Drag right to increase the amount of timing
enhancement, or drag left to lower the amount. Choose the note value to use as the basis for
timing enhancement from the pop-up menu.
F Zoom slider: Drag to zoom in for a closer view or to zoom out to see more of the track.
G Region name field: Double-click the region name and type a new name.
H Play region button: Click to play the selected region.
I Notes/controller data display: Shows the individual notes of Software Instrument regions in a
graphic format. You can move and resize notes to adjust their pitch, where they start playing,
and how long they play. To see controller data instead of notes, choose the controller you want
to see in the View pop-up menu.
J Beat ruler: Shows beats and measures for the area visible in the editor. Click the Grid button to
choose the note value for the beat ruler in the editor.
Chapter 2 GarageBand at a Glance 15
For Software Instrument Tracks–Score View
You can also view Software Instrument tracks and regions in score view. In score view,
notes and other musical events are shown in standard music notation. You can edit
notes, note velocity, and pedal markings in score view.
A H
B
C
D
E
F
G
I
J
A Piano Roll/Score buttons: Click to change the editor to piano roll (graphic) view or score view.
B View pop-up menu: Choose whether to show notes or controller data in the editor.
C Pitch slider: Drag the slider to transpose the selected Software Instrument region up or down
by up to 36 semitones. The Pitch slider is available only when a region on the track is selected.
D Velocity slider: Drag the slider to change the velocity of selected notes. A note’s velocity reflects
how hard the key is pressed when you play the note. The Velocity slider is available only when a
region on the track is selected.
E Enhance Timing slider and pop-up menu: Drag right to increase the amount of timing
enhancement, or drag left to lower the amount. Choose the note value to use as the basis for
timing enhancement from the pop-up menu.
F Zoom slider: Drag to zoom in for a closer view or to zoom out to see more of the track.
G Clef pop-up menu: Choose a different clef for the score display.
H Region name field: Double-click the region name and type a new name.
I Play region button: Click to play the selected region.
J Notation display: Shows notes and other events in standard music notation. You can move
notes to adjust their pitch and where they start playing, and change how long they play.
K Beat ruler: Shows beats and measures for the area visible in the editor. Click the Grid button to
choose the note value for the beat ruler in the editor.
K
16 Chapter 2 GarageBand at a Glance
For Podcast and Movie Projects–Marker View
When you’re working on a podcast episode, you can view and edit markers in
the editor. In the marker list you can edit each marker’s time position, marker
region artwork, URL, URL title, and chapter title. You can also add episode artwork
in the editor.
B
A
C
E F G H I
D
A Episode Artwork well: Drag artwork here to represent the podcast.
(Appears only when you are creating a podcast.)
B “Marks a Chapter” checkbox: Shows whether the selected marker marks a chapter.
Displays Artwork checkbox: Shows whether the selected marker contains marker region
artwork. (Appears only when you are creating an audio podcast.)
Display URL checkbox: Shows whether the selected marker has a URL.
C Add Marker button: Add a marker at the playhead position.
D Marker list: Shows each marker’s start time, artwork (for podcasts) or video frame (for videos),
chapter title, URL, and URL title.
E Time column: Shows the start time for each marker.
F Artwork column: Shows the artwork for each marker region. Add artwork by dragging image
files from the Media Browser. (Appears only when you are creating an audio podcast.)
Still Frame column: Shows the video frame at the position of each marker.
(Appears only when you are working with a movie or video file.)
G Chapter Title column: Shows the title of each chapter marker. Click and type a title for a marker.
H URL Title column: Shows the title of each marker region’s URL. Click and type a title for the URL.
I URL column: Shows the URL for each marker region. Type a URL for the website for which you
want to show a link.
Chapter 2 GarageBand at a Glance 17
Loop Browser
Using the loop browser, you can quickly search for loops to add to your projects. You
can find loops using keywords for an instrument, musical genre, or mood. You can also
perform text searches and refine your results in several ways. The loop browser shows
the tempo, key, and number of beats for each matching loop. You can preview loops in
the loop browser before you add them to a project, and add more loops to
GarageBand by dragging them onto the loop browser. The loop browser gives you
three ways to find loops: button view, column view, and podcast sounds view.
Button View
In button view, the loop browser contains a set of keyword buttons. Click a button to
show matching loops in the results list. Clicking multiple buttons narrows the results to
those loops that match all of the selected keywords.
A
C
C
E
F
B
D
G
18 Chapter 2 GarageBand at a Glance
A View buttons: Click one of the buttons to show column view, button view, or podcast sounds
view.
B Loop library pop-up menu: Choose the loops you want to show in the loop browser from the
pop-up menu.
C
Keyword buttons: Click a keyword button to display matching loops in the results list. You can
click multiple keyword buttons to narrow your results.
Reset button: Deselects all currently selected buttons, so you can start a new search.
D Scale pop-up menu: Choose a scale type to see only loops using that musical scale.
E Results list: Shows loops that match the selected keywords. Also displays the tempo, key, and
number of beats for each loop. Click a loop in the results list to preview it. Click the Favs
checkbox for a loop to add it to your favorites.
F Preview volume slider: Drag the slider to adjust the volume of the loop being previewed.
G Search field: Type text in the field to see loops with the text in their file name or path.
Chapter 2 GarageBand at a Glance 19
Column View
In column view, the loop browser features columns for keyword type, categories, and
keywords. Click a keyword type to show categories for that type, click a category to
show keywords, then click a keyword to show matching loops in the results list.
A B
F
C
D
E
G
H
20 Chapter 2 GarageBand at a Glance
I
A View buttons: Click one of the buttons to show column view, button view, or podcast sounds
view.
B Loop library pop-up menu: Choose the loops you want to show in the loop browser from the
pop-up menu.
C Keyword type column: Click a keyword type to show the categories for that keyword type in
the middle column.
D Category column: Click a category to show keywords for that category in the right column.
E Keyword column: Click a keyword to show matching loops in the results list.
F Scale pop-up menu: Choose a scale type to see only loops using that scale.
G Results list: Shows the loops that match the selected keywords. Also displays the tempo, key,
and number of beats for each loop. Click a loop in the results list to preview it. Click the Favs
checkbox for a loop to add it to your favorites.
H Preview volume slider: Drag the slider to adjust the volume of the loop being previewed.
I Search field: Type text in the field to see loops with the text in their file name or path.
Chapter 2 GarageBand at a Glance 21
Track Info Pane
The Track Info pane shows the current instrument, effects, and input settings for the
selected track, and shows the master effects settings for the master track. You can
change these settings in the Track Info pane.
Real Instrument and Software Instrument Tracks
Some controls in the Track Info pane are different for Real Instrument tracks than for
Software Instrument tracks (as noted in the following descriptions).
G
A
B
C
H
DD
E
F
I
J
22 Chapter 2 GarageBand at a Glance
A Browse button: Click to view the instrument list, icon menu, and input controls for the track.
B Instrument library pop-up menu: Choose which instruments you want to see in the category
and instrument lists from the pop-up menu.
C Instrument category list: Click an instrument category to see the instruments for that category
in the instrument list on the right.
D Instrument list: Select an instrument from the list.
E Instrument icon pop-up menu: Click to choose a new instrument icon from the icon menu that
appears. Icons make it easy to distinguish tracks that use similar instruments.
F Input Source pop-up menu (Real Instrument tracks only): Choose the input source for Real
Instrument recording.
Monitor pop-up menu (Real Instrument tracks only): Turn on monitoring to hear your
instrument as you play, or turn it off to avoid feedback.
Recording Level slider and checkbox (Real Instrument tracks only): Drag to set the input
volume for the track. Select the Automatic Level Control checkbox to have GarageBand lower
the recording level to prevent clipping.
G Edit button: Click to view the effects menus and controls for the track.
H Effects slots: Each track includes a compressor and four additional effects slots.
Click an empty effects slot and choose an effect from the pop-up menu.
Click an effect’s LED to turn the effect on or off.
Click an effect name and choose a new effect from the effect pop-up menu.
Click a preset and choose a new preset from the preset pop-up menu.
Drag an effect up or down by the textured area on its left edge to reorder effects.
Sound Generator pop-up menu (Software Instruments only): Choose a new generator to change
the sound of the Software Instrument.
I Sends sliders: Each track includes Echo and Reverb sliders that control the amount of the track’s
output that is sent to the master Echo and Reverb effects.
J Save Instrument and Delete Instrument buttons: Click the Save Instrument button to save an
instrument. Click the Delete Instrument button to delete a saved instrument.
Chapter 2 GarageBand at a Glance 23
Electric Guitar Track
The Electric Guitar track shows the guitar amp and stompbox effects on the stage.
E
A
B
C
D
24 Chapter 2 GarageBand at a Glance
F
A Guitar preset pop-up menu: Choose a guitar preset from the menu.
B Guitar amp: Shows a visual representation of the current guitar amp. Click the amp to see the
amp controls below the stage. Hold the pointer over the amp, then click the arrows that appear
to change the amp model.
C Stompbox effects: Shows a visual representation of the stompbox effects in the current preset.
Click a stompbox to see its stompbox controls below the stage.
D Controls area: When the amp is selected, shows the amp controls. When a stompbox is selected,
shows its stompbox controls. Drag the knobs to change the amp or stompbox control settings.
Click the bypass switch for a stompbox effect to turn the effect on or off.
E Edit button: With the amp selected, click Edit to view the amp model, master effects, and input
controls. With a stompbox effect selected, click Edit to view all the stompbox effects below the
stage. Drag a stompbox to one of the slots on the stage to add a stompbox effect. When you are
finished editing an amp or stompbox, click Done.
F Save Instrument and Delete Instrument buttons: Click the Save Instrument button to save an
instrument. Click the Delete Instrument button to delete a saved instrument.
Chapter 2 GarageBand at a Glance 25
Master Track
The Track Info pane for the master track shows the global project settings and effects
settings for the overall project. Global project settings include tempo, time signature,
and key. Global effects settings include master echo, reverb, EQ, and compressor.
F
A
B
G
C
DD
H
E
I
26 Chapter 2 GarageBand at a Glance
The Echo and Reverb sliders for each track control the amount of echo and reverb sent
from that track to the master echo and reverb effects. In the Track Info pane for the
master track, you can change the master echo and reverb effects.
A Browse button: Click to view the instrument list, icon menu, and input controls for the track.
B Master effects pop-up menu: Choose which master effects you want to see in the category and
effects lists from the pop-up menu.
C Master effects category list: Click a category to see the effects for that category in the master
effects list on the right.
D Master effects preset list: Click a master effects preset from the list to apply it to the project.
E Tempo, key, and time signature controls: Drag the Tempo slider to change the project tempo.
Choose a key from the Key pop-up menu, then choose a scale type from the pop-up menu to
the right.
Choose a time signature from the Signature pop-up menu.
F Edit button: Click to view the effects menus and controls for the track.
G Track Effects: Click the LED to turn the echo and reverb effects on or off. Choose an echo preset
from the Echo pop-up menu. Choose a reverb preset from the Reverb pop-up menu. These
effects control the sound of the Send effects in individual tracks.
H Master Effects slots: Each master track includes a Visual EQ, a compressor, a ducker, and one
additional effects slot.
Click an effect’s LED to turn the effect on or off.
Click a preset and choose a new preset from the preset pop-up menu.
Click an empty effects slot and choose an effect from the pop-up menu.
I Save Master and Delete Master buttons: Click the Save Master button to save a set of master
effects. Click the Delete Master button to delete a saved set of master effects.
Chapter 2 GarageBand at a Glance 27
Media Browser
With the Media Browser, you can find and add songs from your iTunes library, photos
from your iPhoto library, iMovie projects, and other video files.
A
B
C
D
E
A Media Type buttons: Click the button for the type of media files you want to work with.
B Source list: Navigate to the folder containing the files you want to use. You can also add folders
by dragging them from the Finder.
C Media list: View, preview, and select media files to add to your project.
D Play button: Click to preview the selected media file.
E Search field: Type text to search for files by name.
28 Chapter 2 GarageBand at a Glance
3 Tutorial 1: Creating and Playing
GarageBand Projects
3
You can create GarageBand projects for songs, podcasts,
ringtones, and more. You can play projects to hear you
music, and save them in several ways.
In this tutorial, you’ll learn how to:
 Create a new project from a template
 Choose project settings for tempo, key, and time signature
 Play the project
 Save the project
Creating a New Project
You start working in GarageBand by creating a project. Projects are where you record,
arrange, and mix your music. When you open the New Project dialog, you can select a
template for the type of project you want to create.
You can choose from several different types of projects, including:
 Music projects for voice, acoustic instruments, electric guitar, loops, and more
 Podcast projects for enhanced audio and video podcast episodes
 Magic GarageBand projects, in which you choose the genre and GarageBand
chooses the instruments and creates an arrangement
 iPhone ringtone projects that you can send to iTunes and use on your iPhone.
In addition to creating new projects, you can open and download Learn to Play lessons
in the New Project dialog. To learn how to use Learn to Play lessons, see “Tutorial 2:
Learning to Play Guitar and Piano” on page 40.
29
To create a new music project:
1 Choose File > New.
The New Project dialog appears, with buttons for different project types, including New
Project, Magic GarageBand, and iPhone Ringtone. Click the New Project button.
Project templates appear in the main area of the window. Templates are included for
voice, acoustic instrument, electric guitar, keyboard, songwriting, loops, and podcast
episode.
2 Click the icon for the template you want to use, then click Choose.
3 In the Save As dialog, type a name for the project in the Save As field, then browse to
the location where you want to save the project.
4 Click Save.
After a moment, the GarageBand window opens with the new project. The central area
of the GarageBand window is the timeline, which is divided into horizontal rows called
tracks. You organize your recordings and loops in tracks. The left area shows the track
headers, where you can adjust volume, pan position, and other settings for each track.
Below the timeline is the control bar, with buttons to show different editors and
inspectors, a set of transport controls you use to play your projects, and the LCD, where
you can change project settings and change the units of time in the beat ruler. For
more information about the controls in the GarageBand window, see “GarageBand at a
Glance” on page 9.
You can make music in GarageBand in the following ways:
 By recording sound from a microphone connected to your computer
 By recording sound from an electric guitar connected to your computer
 By connecting a USB (or MIDI) keyboard and playing the Software Instruments built
into GarageBand
30 Chapter 3 Tutorial 1: Creating and Playing GarageBand Projects
Loading...