DeLonghi DRAGON HM3 User Manual

GB 3-06-2004 11:27 Pagina 1

i n s t r u c t i o n s

DRAGON HM3

Please retain these instructions for future reference

GB 3-06-2004 11:27 Pagina 2

Thank you for choosing this De’Longhi radiator. To get the very best out of your new radiator it is advisable to read these instructions before using it.This will ensure that you gain optimum results and use the appliance safely.

General instructions

Take the radiator out of its packing box and remove any polystyrene pieces or any other packaging material that might be lodged inside it.

Make sure that the radiator has not been damaged during transit and that the mains cable is in working order. Do not operate the radiator if damaged.

“Easy wheel”system

Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish. Fully unfold the castors by turning them outwards (Fig. 1).

Turn the radiator back to its upright position.

Fig.1	Electrical connection
	- Before plugging the radiator into the mains, check that your
		supply voltage is the same as that shown on the rating plate of
		the radiator.
	- If using more than one appliance at a time, it is important to
		ensure that the ring main is adequate to cope with the power
		requirements.
	- It is important to ensure that the socket is adequately earthed.
	- This radiator complies with EEC Directive 89/336 relating to
		electromagnetic compatibility.
	How to use it
	Switching on
	Plug the radiator in; position the thermostat slider to maximum and
	turn the radiator on as follows using the power selector:
	•	Turn the power selector to position 1 to select minimum output
		(the light on the left will come on).
	•	Turn the power selector to position 2 to select medium output
		(the light on the right will come on).
	•	Turn the power selector to position 3 to select maximum output
		(both lights will come on).

Adjusting the thermostat

Leave the thermostat at its highest setting until the room has reached the required temperature.Then slowly turn the thermostat slider back until you hear a click.The temperature selected in this way will then be regulated automatically and kept constant by the thermostat.

2

Dragon HM3