Zanussi ZWP580 Manual

	User manual	Használati	Инструкцияѝ
			поѝ
		útmutató
			эксплуатации

Washing					Automata	Стиральнаяѝ
machine					mosógép	машина

ZWP 580

Thank you for selecting our appliance

We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances.

Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.

Köszönjük, hogy a mi készülékünket választotta!

Kívánjuk, hogy sokszor lelje örömét új készülékében, és reméljük, hogy ismét a mi márkánkat keresi majd, amikor háztartási készülékeket vásárol.

Kérjük, hogy figyelmesen tanulmányozza át ezt a felhasználói kézikönyvet, és őrizze meg a termék teljes életciklusa során, hogy később is a rendelkezésére álljon. A felhasználói kézikönyvet adja át a készülék esetleges jövőbeli tulajdonosának

Спасибо, что Вы выбрали наш электробытовой прибор

Мы желаем Вам получить массу удовольствия от Вашего нового прибора и надеемся, что в следующий раз Вы вновь выберете наше изделие.

Пожалуйста, внимательно прочтите это руководство, и во время эксплуатации прибора используйте его в качестве справочного документа. Руководство пользователя должно передаваться каждому будущему владельцу изделия.

2

Contents
Warnings .........................................................	4
Description of the appliance............................	6
Programmes table...........................................	8
How to run a wash cycle .................................	9
Washing guide .............................................	12
Care and cleaning.........................................	14
Operating problems ......................................	15
Technical specifications ................................	17
Consumption.................................................	18
Environment..................................................	19
Installation.....................................................	20

3

Warnings

WARNING !

These warnings are for the safety of you and others around you.

Please read these points carefully before installing and using your appliance. Thank you for your attention.

Keep this user manual with your appliance. If the appliance is sold or given to another person, please make sure this user manual is included. This way, the new user will have the relevant operating instructions and warnings.

General safety

•Do not modify or attempt to modify this appliance. This would put yourself in danger.

•Ensure that all coins, safety pins, brooches, screws etc have been removed before starting a washing programme. If left in washing, they can seriously damage the appliance.

•Use the amount of detergent recommended in the paragraph “Using the right amount of detergent”.

•Put small items together (socks, belts etc.) in a small linen bag or pillow case.

•Unplug and close inlet hose tap after using appliance.

•Always disconnect the power supply from the appliance before cleaning or maintenance.

•Do not machine wash clothes with ribbing, unfinished or torn material.

Installation

•Unpack or ask for the appliance to be unpacked immediately upon arrival. Check the outside of the appliance is not damaged in any way. Put any complaints you may have in writing on your copy of the delivery receipt.

•The appliance must be untied before connec-

ting to power supply or using. If all transit packaging is not completely removed, the appliance or surrounding furniture could be damaged.

•Connection to the water supply must be carried out by a qualified plumber.

•If your domestic electrical circuit needs adapting to allow the appliance to be plugged in, use a qualified electrician.

•Ensure that, after installation, the power cable is not trapped under the appliance.

•If the appliance is installed on carpeted floor, ensure that the carpet does not obstruct any ventilation ducts located at the base of the appliance.

•The appliance must be equipped with an earthed power plug which conforms to regulations.

•Before connecting your appliance to the power supply, carefully read the instructions in the chapter entitled “Electrical connection”.

•Replacing the power cable should only be carried out by the After Sales Service.

•The manufacturer cannot be held responsible for any damage resulting from incorrect installation.

Precautions to be taken against frost

If your appliance is exposed to temperatures below 0°C, the following precautions must be taken :

•Close the tap and disconnect the inlet hose.

•Place the end of this hose and the drain hose in a basin on the floor.

•Select the Drain programme let it run until the end of the cycle.

•Disconnect the appliance from the power supply by turning the program selector to “Stop”.

•Unplug the appliance.

•Screw the inlet hose back on and replace the

4

drain hose.

This way, the water remaining in the hoses will be drained away, avoiding any ice formation which would damage your appliance.

Before turning your appliance on again, ensure that it is installed in an area where the temperature will not fall below freezing.

Use

•Your appliance is intended for normal domestic use. Do not use the appliance for commercial or industrial purposes or for any purpose other than the one it was designed for : washing, rinsing and spinning.

•Only wash items suitable for this treatment. Refer to the instructions on the label of each item.

•Do not put items into the washing machine which have had stains removed with petrol, alcohol, trichlorethylen etc. If such stain removers have been used, wait until the product has evaporated before putting these items into the drum.

•Your appliance has been designed for use by adults. Ensure children do not touch the appliance or use it as a toy.

5

Description of the appliance

The control panel

Programme selector

Programme selector

Spin pushbutton

Options pushbutton

Lights of cycle progress

Start/Pause pushbutton

Delay start pushbutton

Spin

Options

Lights

of cycle

Delay

start

pushbutton

pushbuttons

progress

pushbutton

Start/Pause

pushbutton

•On the position, the appliance is switched off.

•On another position, the appliance is switched on and a programme is selected.

•Choice of the desired spin speed or Rinse hold option by pressing the pushbutton.

•Choice of the options by pressing the pushbuttons.

•Indicate the phase in progress.

•To start the programme ou pause the programme.

•Choice of a delay start by pressing the pushbutton.

6

The control panel	Dispenser box
Lid handle	Wash
	Softener (do not fill
	above the MAX sym-
	bol M )
	Prewash
Adjustable level-
ling feet

7

Programmes table

	Programme / Type of washing		Load	Possible options
		Cottons : White or colour, e.g., normally soiled work clothes, bed	5,5 kg	Prewash
	linen, table linen, body linen, towels.			Quick**
				Rinse plus
		Eco* : White or colour, e.g., normally soiled work clothes, bed linen,	5,5 kg	Rinse hold
	table linen, body linen, towels.			Delay start
		Synthetics : Synthetic fabrics, body linen, coloured fabrics, non-iron	2,5 kg
	shirts, blouses.
		Delicates : For all delicate materials, for example, curtains.	2,5 kg
		Easy iron : Reduces creasing and makes ironing easier.	1,0 kg	Prewash
				Rinse plus
				Rinse hold
				Delay start
		Handwash : Very delicate items carrying the “wash by hand” label.	1,0 kg	Rinse hold
				Delay start
		Wool : Machine washable wool carrying the labels “pure new wool,	1,0 kg	Rinse hold
	machine washable, does not shrink”.			Delay start
		Sport : For very dirty outdoor sports clothes. The Prewash option is	2,5 kg	Rinse plus
		activated.		Rinse hold
				Delay start
		Rinses : Hand washed items can be rinsed in this program.	5,5 kg	Rinse plus
				Rinse hold
				Delay start
		Drain : Runs an empty cycle after a Rinse hold or (Night Silence Plus).	5,5 kg
		Spin : A spin cycle from 500 to 850 rpm after a Rinse hold (or Night	5,5 kg	Delay start
	silence plus.

*Reference programme for test conforming to CEI 456 standard (Eco 60° C).

**Not available with Eco programme.

8

How to run a wash cycle ?

Using for the first time

IMPORTANT !

•Ensure the electrical and water connections comply with the installation instructions.

•Remove the polystyrene insert and all other items inside the drum.

•Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water tank.

Daily use

Loading washing

•Open the lid of the appliance.

•Open the drum by depressing the locking button A : The two shutters unlock automatically.

•Load the washing, close the drum and the lid of your washing machine.

A

WARNING !

Before closing the lid of your appliance, ensure that the drum is properly closed :

•When the two shutters are closed,

•locking button A released.

Proportioning of detergents

Your washing machine has been designed to reduce your water and detergent consumption. You can therefore reduce the amounts recom-

mended by detergent manufacturers.

Pour the amount of washing powder into the washing and prewash compartments if you have selected the “prewash” option. Pour fabric softener into the compartment if neces-

sary .

If you use another detergent type, refer to the section “detergents and additives” in the washing guide.

Selection of desired programme

You can find the right programme for different types of washing in the programme table (see “Programme table”).

Turn the programme selector to the required

programme. The “Start/Pause” pushbutton flashes green.

WARNING !

If you turn the programme selector to another programme while a cycle is in progress, the appliance will ignore the new selected pro-

gramme. The “Start/Pause” pushbutton flashes red for a few seconds.

9

Selecting the spin speed

Press the “Spin” pushbutton to change the spin speed, if you want your washing to be spun at

a different speed to the one selected by the appliance. You can also select “No spin”*, “Rinse

hold” * or “Night silence plus”*.

The maximum speeds are : Cottons, Eco, Synthetics, Easy iron, Handwash, Wool, Sport : 850 rpm,

Delicates : 700 rpm.

At the end of the programme, if you have selected “Rinse hold” or “Night silence plus”, you then need to select a “Spin” or “Drain” programme to finish the cycle.

“Rinse hold”

The washing machine will not drain the water from the last rinse, so will not crease the laundry.

Selecting options

You must select the dif-

ferent options after selecting the programme and before

pressing the “Start/ Pause” pushbutton (see “Programme table”).

Press the desired button(s) ; the corresponding lights come on. If pressed again, the lights go out. If one of the options is not compatible with the selected programme, the “Start/Pause” pushbutton flashes red..

*depending on model

“Prewash” option

The appliance runs a prewash at 30°C max. The prewash finishes with a short spin cycle for cotton or synthetic programmes, and with an empty cycle for delicates programmes.

“Quick” option

The washing time will be reduced depending of the selected programme.

“Rinse plus” option

The washing machine will add one or more rinses during the cycle.

This option is recommended for people with sensitive skin and in soft water areas.

Temporary :

Press the “Rinse plus” pushbutton. The option is only active for the selected programme.

Permanent :

Hold down the “Option” and “Rinse plus” pushbuttons for a few seconds. The option is permanently activated, even if the appliance is switched off..

To deactivate it, repeat the process.

“Delay start”

This option allows you to delay the start of a wash programme by 3, 6 or 9 hours by pressing the “Delay start” pushbutton.

You can change or cancel the delayed start time at any time before you press the “Start/Pause” pushbutton, by pressing the “Delay start” pushbutton again (when all indicators are off, the wash programme will start immediately).

If you have already pressed the “Start/Pause”

pushbutton and you want to change or cancel the delayed start, proceed as follows :

10

•To cancel the delayed start and start the cycle

immediately, press “Start/Pause” and then “Delay start” . Press “Start/Pause” to start the cycle.

•To change the timer delay period, you must go

through the “Off” position and reprogram your cycle.

WARNING !

The lid will be locked during the delayed start time. If you need to open it, you must first pause

the appliance by pressing the “Start/Pause” pushbutton. After closing the lid again, press the

“Start/Pause” pushbutton.

Start of the programme

Press the “Start/Pause” pushbutton to start the cycle ; the corresponding light will come on green.

It is normal for the programme selector to remain stationary during the cycle.

The light corresponding to the current cycle is illuminated.

: Prewash + Wash

: Rinse + Spin

: End of cycle

Interrupting a programme

Adding washing during the first 10 minutes

Press the “Start/Pause” pushbutton : the corresponding light will flash green while the appliance is paused. The lid can only be opened around 2 minutes after the washing machine has come to a stop. Press the “Start/Pause” pushbutton again to continue the programme.

Modifying the programme in progress

Before making any changes to the current programme, you need to pause the washing machine by pressing the “Start/Pause” pushbutton. If the modification is not possible, the “Start/Pause” pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below).

Cancelling the programme

If you want to cancel the programme, turn the programme selector to the “Off” position.

End of the programme

The washing machine stops automatically ; the “Start/Pause” pushbutton goes out and the light comes on. The lid can only be opened around 2 minutes after the washing machine has come to a stop.

Turn the programme selector to the “Off” position.

Remove washing.

Unplug and close water inlet tap.

WARNING !

We recommend leaving the lid and drum open after use to ventilate the water tank.

Standby mode

If the appliance is on but no commands are selected for 10 min before or after a cycle, it goes into standby mode. All the lights go out and

“Start/Pause” flashes slowly.

To exit standby mode, simply press any pushbutton or turn the programme selector.

11

Washing guide

IMPORTANT !

Sorting and preparing the washing

•Sort washing by type and care label (refer to International symbols section below) : normal wash for tough fabrics which can withstand intense washing and spinning cycles ; delicate wash for delicate fabrics which need to be treated with care. For mixed loads, loads with items of different types of material, choose a programme and a temperature suitable for the most fragile material.

•Wash whites and colours separately : Otherwise, whites will be coloured or will turn grey.

•New coloured clothes often contain excess dye. It is recommended to wash such items separately the first time. Follow care instructions “wash separately” and “wash separately several times”.

•Empty pockets and unfold items.

•Remove loose buttons, pins and fasteners. Close zip fasteners, tie ups laces and straps.

•Turn multilayered fabrics (sleeping bags, anoraks, etc.), coloured headwear, wool and material with printed designs inside out.

•Wash small fragile items (socks, tights, bras, etc) in a net bag.

•Take special care with curtains. Remove hooks and place net curtains in a net or bag.

Wash loads depending on type of materials

The amount of washing placed in the drum must not exceed the maximum capacity of the washing machine. This capacity can vary depending on the type of materials. Reduce the quantity if washing is heavily soiled or made of absorbant material.

Not all textiles have the same volume in the drum or the same water absorption levels. In

general, the drum must therefore be filled :

•to full capacity but avoiding excessive pressure on cotton, linen and cotton/linen mixtures,

•to half capacity for processed cottons and synthetic fibres,

•to a third of its capacity for very fragile items

such as net curtains and woollens.

For mixed loads, fill drum depending on most fragile materials.

Detergents and additives

Only use detergents and additives designed for use in a washing machine. Refer to manufacturer’s recommendations and also Dispenser box and Using the right amount of detergent sections.

We do not recommend mixing different types of detergents. This may spoil the washing.

The amount of detergent to be used depends on the size of the load, the hardness of the water and how heavily soiled the washing is.

If the water is soft, reduce the amount slightly. If the water contains lime scale (a descaler is recommended) or if the washing is heavily soiled or stained, increase the amount slightly.

You can obtain information on the hardness level of water in your area by contacting your water company or other competent source.

There are no restrictions on the use of powder detergents.

Liquid detergents must not be used when a prewash has been selected. For cycles without prewash, they can be added either via means of a dosing ball, or in the detergent compartment. In either case, the wash cycle must be started immediately.

Detergent tablets or doses must be placed in the detergent compartment of your appliance’s dispenser box.

12

For stain removal before a wash cycle, please refer to manufacturer’s recommended amounts and instructions. If you use a detergent to

remove stains, the wash cycle must be started immediately.

International symbols

NORMAL
WASH	Wash at 60°C	Wash at 40°C	Wash at 30°C	Hand wash	Do not wash
Wash at 95°C
DELICATE
WASH

BLEACHING	Whitewashing (bleach) allowed (cold only and in diluted		No whitewashing (bleach)
		solution)
IRONING	High temperature	Mid temperature	Low temperature	Do not iron
	(max 200°C)	(max 150°C)	(max 100°C)

DRY	Dry cleaning	Dry cleaning			Dry cleaning	Do not dry clean
CLEANING	(all common solvents)	(all common solvents		(only oil-based solvents
		except trichlorethylene			and R113)
					High
					temperature
					Mid
					temperature
DRYING	Dry flat	Hang dry	Dry on clothes		Tumble drying per-	Do not tumble dry
				hanger	mitted

13

Care and cleaning

WARNING !

Unplug the appliance before cleaning.

Descaling the appliance

To descale the appliance, use an appropriate non-corrosive product designed for washing machines. Read product label for recommended amounts and how often descaling should be carried out.

The exterior

Use warm soapy water to clean the exterior of the appliance. Never use alcohol, solvents or similar products.

Dispenser box

To clean, proceed as follows :

1

2

3

4

5

6

Object trap

Regularly clean out the object trap which is located at the bottom of the drum :

1

2

3

4

5

Water inlet filters

To clean the 2 filters, proceed as follows :

1

2

14

Operating problems

Numerous checks were carried	out on your	the sections below before contacting the after-
appliance before it left the factory. However,		sales service.
should you notice a malfunction, please refer to
Problems	Causes
The washing machine doesn’t start	•the appliance isn’t plugged in correctly, the electrical installation
or doesn’t fill :	isn’t working,
	•the lid of your appliance and the drum shutters aren’t closed firmly,
	•the programme start command hasn’t been properly selected,
	•there is a power failure,
	•the water supply has been cut off,
	•the water inlet tap is closed,
	•the water inlet filters are dirty,
	•a red tab appears on the water inlet hose.
The appliance fills but empties	•the drainage U-piece is fixed too low (see installation section).
straight away :
The washing machine doesn’t rinse	•the drain hose is blocked or bent,
or doesn’t empty :	•the drainage filter is obstructed,
	•the out of balance detector has been activated : washing is une-
	venly distributed in the drum,
	•the “Drain” programme or “Night Silence Plus” or “Rinse hold”
	options have been selected,
	•the height of the drainage U-piece is unsuitable.
You have found water around the	•too much detergent has caused foam to overflow,
washing machine :	•the detergent is unsuitable for machine washing,
	•the drainage U-piece isn’t attached correctly,
	•the water inlet hose is leaking.
Wash is unsatisfactory :	•the detergent is unsuitable for machine washing,
	•there is too much washing in the drum,
	•the wash cycle is unsuitable,
	•there isn’t enough detergent.
The appliance vibrates, is noisy :	•the appliance hasn’t been untied properly (see untying section),
	•the appliance isn’t level and is unbalanced,
	•the appliance is too close to the wall or furniture,
	•washing is unevenly distributed in the drum,
	•the load is too small.

15

Problems			Causes
the wash cycle is much too long :			•the water inlet filters are dirty,
			•the power or water supply has been cut off,
			•the motor overheating detector has been activated,
			•the water inlet temperature is lower than usual,
			•the foam detection security system has been activated (too much
			detergent) and the washing machine has begun draining the foam,
			•the out of balance detector has been activated : an extra phase has
			been added to distribute washing more evenly in the drum.
The washing machine stops during			•the water or electricity supply is defective
a wash cycle :			•a Rinse hold has been selected,
			•the drum shutters are open.
The lid doesn’t open at the end of			•the “immediate opening”* light is not lit,
the cycle :			•the temperature inside the drum is too high,
			•the lid unlocks 1 - 2 minutes after the end of the cycle*.
The	“Start/Pause”	pushbutton**	•the lid isn’t closed properly.
flashes red*** :
The	“Start/Pause”	pushbutton**	•the drainage filter is obstructed,
flashes red*** :			•the drain hose is blocked or bent,
			•the drain hose is fixed too high (see “Installation” section).
			•the drainage pump is blocked,
			•the standpipe is blocked.
The	“Start/Pause”	pushbutton**	•the water inlet tap is closed,
flashes red*** :			•the water supply has been cut off.
Softener runs directly into the drum			•you have gone past the MAX indicator.
when filling the dispenser box :

* Depending on model.

**On some models, the audible signals can sound.

*** After solving any problems, press the ‘Start/Pause’ pushbutton to restart the interrupted programme.

16

Technical specifications

DIMENSIONS	Height	850 mm
	Width	400 mm
	Depth	600 mm
LINE VOLTAGE / FREQUENCY		230 V / 50 Hz
POWER CONSUMPTION		2300 W
WATER PRESSURE	Minimum	0,05 MPa (0,5 bar)
Connection to water supply	Maximum	0,8 MPa (8 bar)
		Type 20x27

This appliance conforms to the CEE 89-336 directive concerning the limiting of radio-electric interference and the 2006/95/CE directive concerning electrical safety.

17

Consumption

Programme / Washing type	Temperatu-			Average consumption**
	res
	°C			Litres	kWh	Time
Cottons	90			67	2,20	140-150
Eco*	60			49	1,04	135-145
Cottons	60			62	1,30	120-130
Cottons	40			62	0,75	115-125
Cottons	30			62	0,55	110-120
Cottons	cold			62	0,45	95-105
Synthetics	60			48	0,85	90-100
Synthetics	40			48	0,65	75-85
Synthetics	30			48	0,55	70-80
Synthetics	cold			48	0,20	70-80
Easy iron	40			51	0,55	95-105
Delicates	40			53	0,55	60-70
Delicates	30			53	0,30	55-65
Delicates	cold			53	0,15	50-60
Handwash	30			48	0,40	50-60
Wool	40			48	0,45	55-65
Sport	40			50	0,70	95-105
Rinses	-			32	0,05	50-60
Drain	-			-	0,002	0-10
Spin	-			-	0,015	10-20

*Reference programme for test conforming to CEI 456 standard (Eco 60° C) : 49 L / 1,04 kWh / 140 min

**Average figures which can vary depending on conditions of use.

Consumptions shown refer to the maximum temperature for each programme.

18

Environment

Disposing of the appliance

All materials carrying the symbol are recyclable. Dispose of them at a waste collection site (enquire at your local council) for collection and recycling.

When disposing of your appliance, remove all parts which could be dangerous to others: cut off the power supply cable at the base of the appliance.

The symbol

on the product or on its packa-

ging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Protecting the environment

To save water and energy and therefore help protect the environment, we recommend the following :

•Whenever possible, use the appliance at full capacity and avoid partial loads.

•Only use the prewash and soak programmes for heavily soiled items.

•Use an appropriate amount of detergent for the hardness of the water (cf. section “Using the right amount of detergent”), the size of the load and how soiled the washing is.

19

Installation

	WARNING !		7	8
	Remove all protective packaging for transit
	before using for the first time. Keep in case nee-
	ded for future transit : Transporting a non-secu-
	red appliance may damage internal components
	and cause leakages and malfunctions. The
	appliance can also be damaged through physi-
	cal contact.
	Unpacking		Untying
	1	2
				4
				3
	3	4	5
			1
				2

5	1
	6

2

20

3

4

To install your washing machine at the same level as surrounding furniture, proceed as follows :

5

Water supply

Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows (Do not reuse an old hose) :

1

2

3

4

Open the water inlet tap. Check there are no leaks.

The water inlet hose can not be extended. If it is too short, please contact the after-sales service.

Drainage

1

with the appliance*.

- The connector at the end of the flexible hose can be attached to all common types of standpipe.

Attach the connector to the standpipe with the hose clamp supplied

- Fit the U-piece on the

2

drainage hose.

Place everything

in a

drainage point (or in a

sink) at a height of

between 70 and

100

cm. Ensure it is positio-

ned securely. Air

must

be able to enter the end of the hose, to avoid any risk of siphoning.

*depending on model

21