Xylem MJK 1100, MJK2100, MJK3100 User Manual

Manual

Manual

MJK 1100 / 2100 / 3100
Submersible Hydrostatic Level Transmitters

M275US0205

As our products are developed continuously we reserve the right to make any
change in the dimensions and the specifications.

MJK Automation A/S

Byageren 7
DK-2850 Nærum
Denmark
Tel.: [phone]
Fax: [phone]
[e-mail]
www.mjk.com

Manual

General

Safety instructions 1: Read this manual carefully.

Product identification and
pressure ranges

Model 1100
Nominal pressure

range 0 - 10 ft,
0 - 30 ft, 0 - 100 ft.
Other ranges
available; see data
sheet.

Level measuring with a pressure transmitter
is done by immersing a transmitter in the
liquid. The transmitter measures the
hydrostatic pressure and generates a
current signal that is proportional with the
hydrostatic pressure and thus proportional
with the liquid level.

2: Be aware of the environment on the

installation site. Wear neseccary protec­tive equipment and follow all current
safety regulations.

It is very important for the overall measuring
accuracy that the pressure transmitter has
the correct pressure range.
Check that the item(s) delivered corresponds
to the ordered item(s) by means of the
information on the label on the packing:

Model 2100
Nominal pressure

range 0 - 10 ft,
0 - 30 ft, 0 - 100 ft.
Other ranges
available; see data
sheet.

The MJK Submersible Hydrostatic Level
Transmitters are all designed to generate
a 2-wire (passive) 4 - 20 mA signal with a
10 - 30 V DC supply.

3: MJK Pressure Transmitters must not be

used in explosion hazarduous areas.

4: MJK Pressure Transmitters must not be

submerged into flammable liquids.

On the model 1100 transmitter, all the
standard pressure ranges together with the
corresponding order numbers are printed on
a label on the transmitter housing. The
pressure range can be determined by
comparing the order number impressed in
the steel housing (together with the serial
number) with the numbers on the label.

Model 3100
Nominal pressure

range 0 - 1 ft,
0 - 3 ft, 0 - 10 ft.
Other ranges
available; see data
sheet.

M275US0205

Shown below is the label for a model 1100
pressure transmitter, range 0-10 ft:

➀➀

➀

➀➀
➁➁

➁

➁➁

➂➂

➂

➂➂
➃➃

➃

➃➃

➀➀

➀ Item number

➀➀
➁➁

➁ Item description

➁➁

The same information plus cable length is
printed on a similar label tagged onto the
transmitter cable.

➂➂

➂ Pressure range

➂➂
➃➃

➃ Serial number

➃➃

On model 2100 and 3100 transmitters, the
actual pressure range is ticked off on the
label on the housing.

For all verstions the pressure range can be
determined through the serial number.

MJK Automation A/S

Byageren 7
DK-2850 Nærum
Denmark
Tel.: [phone]
Fax: [phone]
[e-mail]
www.mjk.com