Whirlpool HB 650 AN, HB 650 S INSTRUCTION FOR USE

0 (0)
Whirlpool HB 650 AN, HB 650 S INSTRUCTION FOR USE

DÅTID HGA5K GB

HOB INSTRUCTIONS

Destination

CZ SK RU

1.

Removable panstand grids

INJECTORS TABLE

 

 

 

 

 

 

 

 

 

 

 

CATEGORY II2H3B/P

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Type of gas used

Type of

Injector

Rated heat

 

Rated

 

Reduced

 

 

Gas pressure

2-5.

Semirapid burners

 

 

 

 

 

 

 

burner

marking

capacity

consumption

 

heat

 

 

 

(mbar)

 

3.

Rapid

burner

 

 

 

 

 

kW

 

 

 

 

capacity kW

 

 

 

 

 

 

 

 

 

 

 

 

 

min.

 

nom.

max.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.

Auxiliary burner

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

triple crown

132

 

3.30

 

314 l/h

 

 

1.55

 

 

 

 

 

 

6.

Triple crown burner

NATURAL GAS

rapid

Y 115

3.00

 

286 l/h

 

 

0.60

 

 

17

 

20

25

 

Auxiliary burner control knob

(Methane) G20

semirapid

H2 98

1.65

 

157 l/h

 

 

0.35

 

 

 

7.

 

 

 

 

 

 

 

 

 

 

auxiliary

X 72

1.00

 

95 l/h

 

 

0.30

 

 

 

 

 

 

8.

Rapid

burner control knob

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIQUID PETRO-

triple crown

92

 

3.30

 

240 l/h

 

 

1.55

 

 

 

 

 

 

9.

Triple burner control knob

 

 

 

 

 

 

 

 

 

 

LEUM GAS

rapid

87

 

3.00

 

218 g/h

 

 

0.60

 

 

25

 

30

35

 

Semirapid burner control knob

 

 

 

 

 

 

 

10.

(Butane) G30

semirapid

65

 

1.65

 

120 g/h

 

 

0.35

 

 

 

 

 

 

 

 

 

 

 

 

 

11.

Semirapid burner control knob

(Propane) G31

auxiliary

50

 

1.00

 

73 g/h

 

 

0.30

 

 

 

 

 

 

Symbols

 

 

 

 

 

 

 

 

 

 

 

Type of gas used

Appliance model

 

Total rated heat

 

 

Total rated

 

Air necessary (m3) for the

Shaded circle

Tap closed

 

5 burners

 

capacity kW

 

consumption

 

combustion of 1 m3 of gas

G20 20 mbar

3C - 1 R - 2 SR - 1 AUX

 

10.60

 

 

 

1009 l/h

 

 

 

 

9.52

 

Large flame

 

Maximum opening/delivery

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G30/G31 30 mbar

3C - 1 R - 2 SR - 1 AUX

 

10.60

 

 

 

771 g/h

 

 

 

 

30.94

 

and star

 

and electric ignition

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Small flame

 

Minimum opening or

ELECTRIC SUPPLY: 230V ~ 50Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

reduced delivery

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOB DIMENSIONS (mm)

Operation of burners with safety device and electric ignition

To light one of the burners:

• Press the relative knob and turn it anti-clockwise to the large flame and star setting .

At the same time, hold the knob down until the burner ignites.

After the burner has ignited, keep the knob pressed down for about 10 seconds.

Release the knob.

If the burner does not ignite, repeat the operations described above.

Note:

-Should particular local conditions of the delivered gas make ignition of the burner difficult, it is advisable to repeat the operation with the knob turned to the small flame setting .

-The burner safety device shuts off the gas supply to the burner if the flame goes out accidentally (because of a sudden draught, an interruption in the gas delivery, boiling over of liquids, etc.).

-The separator panel, positioned beneath the cooktop at a minimum distance of 20 mm, must be sealed.

The burner safety system serves to prevent the emission of gas if the flame should be extinguished accidentally (draughts, interruptions in gas supply, dousing with liquids, etc.).

NOTES: In case of installation of a hood above the cooktop, please refer to the hood instructions for the correct distance.

BEFORE USING THE COOKTOP

These instructions are only valid for above mentioned Country destinations and also on the appliance.

Keep the packaging material (plastic bags, polystyrene parts, etc.) out of the reach of children, as they are potentially dangerous.

Use a proprietary detergent to clean the stainless steel hob and remove any grease and food deposits. Before using the hob, be sure to remove any adhesive labels.

Check whether the cooktop has been damaged during transport.

Ensure that the installation and gas/electrical connections are performed by a qualified technician, following the manufacturer's instructions and in compliance with current local safety regulations.

SUGGESTIONS FOR ENVIRONMENT PROTECTION

Packing

The packaging material is 100% recyclable and marked with the recycling symbol ().

Products

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health.

The symbol on the appliance or accompanying documentation indicates that this product should not be disposed of as unsorted municipal waste but must be taken to a collection point for the treatment of WEEE. Dispose of in accordance with local standards governing waste disposal.

For further information on the treatment, recovery and recycling of this appliance, contact your competent local authority, the collection service for household waste or the shop where you purchased the appliance.

5019 619 01319/B

To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation.

HB 650

PRECAUTIONS AND GENERAL ADVICE

CARE AND MAINTENANCE

Before any cleaning or maintenance operation, disconnect the cooktop from mains power supply.

The use of a gas appliance produces heat and humidity in the room. Ensure that the room is well ventilated, or install an extractor hood with exhaust duct.

In case of prolonged use, additional ventilation may be needed (opening a window or increasing the extraction force of the hood).

Keep children away from the cooktop when it is in use and when its has just been switched off.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given initial supervision or instruction concerning use of the appliance by a person responsible for their safety.

After use, ensure that the knobs are in position (off), and close the main gas delivery valve or the gas cylinder valve.

Caution: the lid (where present) might break if overheated. Before closing it, make sure that all the burners are off.

Warning: The protective rubber feet on the panstand grids represent a choking hazard for young children. After cleaning the panstand grids, please ensure that all the rubber feet are correctly fitted.

Declaration of conformity

This cooktop has been designed, constructed and marketed in compliance with:

-safety requirements of EEC Directive “Gas” 90/396;

-safety objectives of the “Low Voltage” Directive 2006/95/CE (which replaces 73/23/CEE and subsequent amendments).

-protection requirements of EEC Directive “EMC” 89/336;

-requirements of EEC Directive 93/68.

This cooktop is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. 1935/2004.

This cooktop (Class 3) has been designed to be used only for cooking. Any other use (such as heating a room) is improper and dangerous.

Cleaning the cooktop surface, panstand grids and control panel

Before cleaning the cooktop, disconnect it from mains power supply and wait until it has cooled down.

Wipe with a cloth moistened with hot water and soap or diluted liquid detergent.

Do not use abrasive or corrosive products, chlorine products or steel wool.

Do not use vapour cleaning appliances.

Do not use flammable products.

Do not leave acid or alkaline substances, such as vinegar, salt or lemon juice, etc., on the cooktop.

Stainless steel surface

Clean with a specific commercial product.

Note: if the cooktop is used continuously, the high temperatures produced by the flames may alter the colour of the surface near the burners.

Cleaning the burners

1.Raise the cap and remove it.

2.Extract the burner from its housing by pulling it up.

3.Soak the burner and the cap in hot water and liquid detergent. (Do not wash into a dishwasher).

4.Rinse out and dry carefully.

5.Ensure that none of its openings is clogged.

6.Reposition the burner and cap.

Note: to avoid damaging the electric ignition device, do not use it when the burners are not in their housing.

Cleaning the electric hotplate

The electric hotplate must be cleaned when it is lukewarm.

Wipe with a cloth moistened with water and salt, and polish with a cloth moistened with oil.

ENERGY SAVING TIPS

The cooktop is equipped with burners and/or a hotplate with different diameters. Use pots and pans whose bottom diameter is equal to that of the burners and hotplate, or slightly larger.

Only use flat-bottomed pots and pans.

The pots and pans must not overlap the control panel.

Burner

Diameter of container

 

 

Rapid (9,1 cm)

24 to 26 cm

Semirapid (6,4 cm)

16 to 22 cm

Auxiliary (4,5 cm)

8 to 14 cm

Triple crown (12 cm)

24 to 26 cm

Fish kettle (23 cm x 4,5 cm)

16 to 35 cm

 

 

If possible, keep the container covered when cooking.

Cook vegetables, potatoes, etc. with a small amount of water in order to cut down cooking time.

A pressure cooker allows you to save even more energy and time.

NO!

TROUBLESHOOTING GUIDE

1. The burner fails to ignite:

Is the main gas delivery valve open?

Has the delivery of the town gas (methane) been suspended?

Is the gas cylinder (liquid gas) empty?

Are the openings of the burner clogged?

Have the cap and burner been positioned correctly after cleaning? (See paragraph “Care and Maintenance”.)

AFTER SALES SERVICE

Before you call the After Sales Service:

1.Check the “Troubleshooting guide” above to see if you can eliminate the trouble yourself.

2.Re-start the cooktop, to check whether correct operation has been restored.

3.If the malfunction persists, call the After Sales Service. Give the following information:

type of malfunction;

model of cooktop;

service number (i.e., the number that follows the word SERVICE on the rating plate under the cooktop and on the guarantee paper);

your complete address;

your telephone number and area code.

2. The burner fails to remain lit:

Repeat the ignition operation, turning the knob to the position with the small flame symbol .

3. The electric ignition device does not work:

Is there a power failure?

If any repairs are required, please contact an authorised After-Sales Service, as indicated in the warranty.

In the unlikely event that an operation or repair is carried out by an unauthorised technician, always request a certification of the job carried out and insist on the use of original spare parts.

Failure to comply with these instructions may compromise the safety and quality of the product.

IKEA of Sweden AB

SE - 343 81 Älmhult

Loading...
+ 2 hidden pages