Loading...
VIZIO VW42L FHDTV10A User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO VW42L FHDTV10A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VW42L FHDTV10A High Definition Television.
For assistance, please call (877) 698-4946 or e- mail us at techsupport@vizio.com.
To purchase or inquire about accessories and installation services for your VIZIO LCD HDTV, please visit our website at www.VIZIO.com or call toll free at 888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO VW42L FHDTV10A either at our website www.VIZIO.com or fill in your registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans give additional coverage during the standard warranty period. Visit our website or call us to purchase a plan.
Write down the serial number located on the back of your VW42L FHDTV10A.
__ __ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories
Dolby and the double-D symbol are trademarks of Dolby Laboratories
Version 2/29/2008 |
1 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
•To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the VW42L FHDTV10A.
•Unplug the power cord before cleaning the VW42L FHDTV10A. A damp cloth is sufficient for cleaning the VW42L FHDTV10A. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
•Always use the accessories recommended by the manufacturer to insure compatibility.
•When moving the VW42L FHDTV10A from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the VW42L FHDTV10A immediately after this to avoid causing fire, electric shock or component damage.
•Do not place the VW42L FHDTV10A on an unstable cart, stand, or table. If the VW42L FHDTV10A falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VW42L FHDTV10A.
•A distance of at least 3 feet should be maintained between the VW42L FHDTV10A and any heat source, i.e. radiator, heater, oven, amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.
•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VW42L FHDTV10A and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VW42L FHDTV10A in a bookcase or cabinet unless proper ventilation is provided.
•Never push any object into the slot on the VW42L FHDTV10A cabinet. Do not place any objects on the top of the product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the VW42L FHDTV10A.
•The VW42L FHDTV10A should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
•The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.
•The VW42L FHDTV10A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket shall be installed near the equipment and shall be easily accessible.
•Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
•Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
•Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VW42L FHDTV10A from damage due to power surges.
•Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
•Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
•Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
•Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
•Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the product.
•Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
•To avoid risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote controller.
•If any of the following occurs please contact the dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into the VW42L FHDTV10A. o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
Version 2/29/2008 |
2 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.
Version 2/29/2008 |
3 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Opening the Package
Your VIZIO VW42L FHDTV10A and accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VW42L FHDTV10A is in good condition and that all of the accessories are included.
The VW42L FHDTV10A weighs approximately 49lbs and is nearly 41” wide and we advise that you take sensible lifting precautions when you unpack and install the HDTV.
The screen can easily be scratched or broken so please handle the product gently and never place the HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO VW42L FHDTV10A
VIZIO Remote Control VR2
Power Cord
Safety Strap
This User Manual
Quick Setup Guide
Registration Card
VIP Services Brochure
2 (Double A) Batteries for the Remote Control VIZIO Warranty and Repair Information
NOTE: Do not press on the screen surface since it will cause permanent damage to the display; and it is not covered under the manufacturer warranty.
Version 2/29/2008 |
4 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Additional Certified Accessories for the VIZIO VW42L FHDTV10A are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VW42L FHDTV10A
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 250W, please use the power cord designated for TV. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space between the back of the TV and the wall. If you would like to mount your TV on the wall, please see below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Attaching the Safety Strap
For when the VW42L FHDTV10A is not mounted on the wall with a Wall Mount, a Safety Strap has been included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety Strap should be used with common sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of the HDTV and pulling it onto themselves.
1.Fix one end of the strap to the wall. If you have a drywall finish it is preferable to fix it to a stud, using a washer underneath the screw head. If you have a solid wall you should use a lag bolt, again using a washer under the nut.
2.Fix the other end of the Safety Strap to one of the upper wall mounting holes on the back of the HDTV, using a washer under the screw head.
Version 2/29/2008 |
5 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VW42L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VW42L FHDTV10A on the wall, please follow the instructions below for removing the stand base.
To remove the stand base
1.Unplug all of the cables and cords from your VW42L FHDTV10A.
2.Place the VW42L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
5.
5. Now, the VW42L FHDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang the VW42L FHDTV10A.
The pitch of the mounting holes is 600mm horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm pitch. The length of the screws will depend on the thickness plate being attach to the TV set; our brackets come with different length screws to accommodate your needs.
3.Remove the eight (8) screws so that the stand base can be removed.
4.Gently remove the stand base.
To find the perfect mount for the VIZIO VW42L FHDTV10A, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 2/29/2008 |
6 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Table of Contents
Chapter 1 Basic Controls and Connections.................................................................. |
9 |
||
1.1 |
Front Panel.......................................................................................................................................................... |
|
9 |
1.2 |
Right Side Panel Controls ................................................................................................................................... |
|
9 |
1.3 |
Rear Panel Connections ................................................................................................................................... |
|
10 |
1.4 |
Left Side Connections ....................................................................................................................................... |
|
11 |
1.5 |
VIZIO Remote Control....................................................................................................................................... |
|
12 |
1.5.1 Insertion of Batteries in the Remote Control .............................................................................................. |
|
13 |
|
1.5.2 Remote Control Range .............................................................................................................................. |
|
13 |
|
1.5.3 VIZIO Remote Control Precautions ........................................................................................................... |
|
13 |
|
1.5.4 Using a Cable or Satellite Remote............................................................................................................. |
|
13 |
|
Chapter 2 Connecting Equipment .................................................................................. |
|
14 |
|
2.1 |
Which Video Connection Should I Use?............................................................................................................ |
|
14 |
2.2 |
Connecting Coaxial (RF) ................................................................................................................................... |
|
15 |
2.2.1 Using Your Antenna or Digital Cable for DTV /TV ..................................................................................... |
15 |
||
2.2.2 Using the Antenna or Cable through your VCR ......................................................................................... |
15 |
||
2.3 |
Connecting Your HDTV Set-Top Box ................................................................................................................ |
|
16 |
2.3.1 Using HDMI ............................................................................................................................................... |
|
16 |
|
2.3.2 Using Component Video............................................................................................................................ |
|
18 |
|
2.4 |
Connecting Your Basic Set-Top Box ................................................................................................................. |
|
19 |
2.4.1 Using Composite Video ............................................................................................................................. |
|
19 |
|
2.4.2 Using Coax (RF)........................................................................................................................................ |
|
19 |
|
2.5 |
Connecting Your DVD Player............................................................................................................................ |
|
20 |
2.5.1 Using HDMI ............................................................................................................................................... |
|
20 |
|
2.5.2 Using Component Video............................................................................................................................ |
|
22 |
|
2.5.3 Using S-Video (AV).................................................................................................................................... |
|
23 |
|
2.5.4 Using Composite (AV) Video ..................................................................................................................... |
|
23 |
|
2.6 |
Connecting Your VCR or Video Camera .......................................................................................................... |
|
24 |
2.7 |
Connecting an external Receiver/Amp .............................................................................................................. |
|
25 |
2.7.1 Optical Output of Audio received with HD Programs ................................................................................. |
25 |
||
2.8 |
Connecting a PC Computer .............................................................................................................................. |
|
26 |
2.8.1 Preset PC Resolutions............................................................................................................................... |
|
27 |
|
2.8.2 Resolution (1920x1080) through RGB (15-Pin VGA) Input........................................................................ |
27 |
||
Chapter 3 Setting Up to Watch Television................................................................... |
28 |
||
3.1 |
Basic LCD HDTV Start Up ................................................................................................................................ |
|
28 |
3.2 |
Watching a TV Program .................................................................................................................................... |
|
33 |
3.3 |
Adjusting Basic HDTV Settings ......................................................................................................................... |
|
34 |
3.4 |
Program Information.......................................................................................................................................... |
|
35 |
3.5 |
Information on HDTV Status ............................................................................................................................. |
|
35 |
Chapter 4 Advanced Adjustment of HDTV................................................................... |
36 |
||
4.1 |
Using the On Screen Display (OSD) ................................................................................................................. |
|
36 |
4.2 |
DTV / TV Input Picture Adjustment.................................................................................................................... |
|
37 |
4.2.1 Picture Mode ............................................................................................................................................. |
|
37 |
|
4.2.2 Backlight .................................................................................................................................................... |
|
38 |
|
4.2.3 Brightness.................................................................................................................................................. |
|
38 |
|
4.2.4 Contrast ..................................................................................................................................................... |
|
39 |
|
4.2.5 Color .......................................................................................................................................................... |
|
39 |
|
4.2.6 Tint............................................................................................................................................................. |
|
39 |
|
4.2.7 Sharpness ................................................................................................................................................. |
|
40 |
|
4.2.8 Color Temperature..................................................................................................................................... |
|
40 |
|
4.2.9 Advanced Video ........................................................................................................................................ |
|
41 |
|
4.3 |
DTV / TV Input Audio Adjustment...................................................................................................................... |
|
43 |
4.3.1 Volume ...................................................................................................................................................... |
|
43 |
|
4.3.2 Bass........................................................................................................................................................... |
|
43 |
|
4.3.3 Treble ........................................................................................................................................................ |
|
44 |
|
4.3.4 Balance...................................................................................................................................................... |
|
44 |
|
4.3.5 Surround.................................................................................................................................................... |
|
44 |
|
4.3.6 Digital Audio Out........................................................................................................................................ |
|
44 |
|
4.3.7 Speakers ................................................................................................................................................... |
|
45 |
|
Version 2/29/2008 |
7 |
|
|
www.VIZIO.com
|
VIZIO VW42L FHDTV10A User Manual |
|
4.3.8 Lip Sync..................................................................................................................................................... |
45 |
|
4.4 |
DTV / TV Tuner Setup....................................................................................................................................... |
46 |
4.4.1 Tuner Mode ............................................................................................................................................... |
46 |
|
4.4.2 Auto Search............................................................................................................................................... |
46 |
|
4.4.3 Skip Channel ............................................................................................................................................. |
47 |
|
4.4.4 MTS........................................................................................................................................................... |
47 |
|
4.4.5 Time Zone ................................................................................................................................................. |
47 |
|
4.4.6 Daylight Saving.......................................................................................................................................... |
47 |
|
4.5 |
DTV / TV Input Setup ........................................................................................................................................ |
48 |
4.5.1 Language................................................................................................................................................... |
48 |
|
4.5.2 Sleep Timer ............................................................................................................................................... |
48 |
|
4.5.3 Wide .......................................................................................................................................................... |
48 |
|
4.5.4 Input Naming ............................................................................................................................................. |
49 |
|
4.5.5 Closed Caption (CC).................................................................................................................................. |
50 |
|
4.5.6 Closed Caption On Mute ........................................................................................................................... |
50 |
|
4.5.7 Digital Closed Caption ............................................................................................................................... |
51 |
|
4.5.8 Reset All Settings ...................................................................................................................................... |
51 |
|
4.6 |
DTV / TV Input Parental Control........................................................................................................................ |
52 |
4.6.1 Channel Block ........................................................................................................................................... |
52 |
|
4.6.2 US TV Rating............................................................................................................................................. |
53 |
|
4.6.3 US Movie Rating........................................................................................................................................ |
54 |
|
4.6.4 Check for New DTV Rating........................................................................................................................ |
54 |
|
4.6.5 Blocked Unrated Programming.................................................................................................................. |
55 |
|
4.6.6 Change the Password ............................................................................................................................... |
55 |
|
4.7 |
HDMI Input Picture Adjustment ......................................................................................................................... |
56 |
4.8 |
HDMI Input Audio Adjustment ........................................................................................................................... |
56 |
4.9 |
HDMI Input Setup.............................................................................................................................................. |
56 |
4.10 Video Input Picture Adjustment ....................................................................................................................... |
57 |
|
4.11 Video Input Audio Adjustment ......................................................................................................................... |
57 |
|
4.12 Video Input Setup............................................................................................................................................ |
57 |
|
4.13 Video Input Parental Control ........................................................................................................................... |
58 |
|
4.14 PC Input Picture Adjustment ........................................................................................................................... |
58 |
|
4.14.1 Auto Adjust .............................................................................................................................................. |
58 |
|
4.14.2 Backlight .................................................................................................................................................. |
58 |
|
4.14.3 Brightness................................................................................................................................................ |
59 |
|
4.14.4 Contrast ................................................................................................................................................... |
59 |
|
4.14.5 Color Temperature................................................................................................................................... |
59 |
|
4.14.6 H-SIZE..................................................................................................................................................... |
60 |
|
4.14.7 H. Position ............................................................................................................................................... |
60 |
|
4.14.8 V. Position ............................................................................................................................................... |
60 |
|
4.14.9 Fine Tune ................................................................................................................................................ |
61 |
|
4.15 PC Input Audio Adjustment ............................................................................................................................. |
61 |
|
4.16 PC Input Setup................................................................................................................................................ |
61 |
|
4.17 Understanding Viewing Features .................................................................................................................... |
62 |
|
4.17.1 Viewing Modes ........................................................................................................................................ |
62 |
|
Chapter 5 Maintenance and Troubleshooting............................................................. |
63 |
|
5.1 |
Maintenance...................................................................................................................................................... |
63 |
5.2 |
Troubleshooting Guide ...................................................................................................................................... |
64 |
5.3 |
Telephone & Technical Support ........................................................................................................................ |
65 |
5.4 |
Compliance ....................................................................................................................................................... |
66 |
5.5 |
FCC Class B Radio Interference Statement...................................................................................................... |
66 |
Chapter 6 Miscellaneous Information ........................................................................... |
67 |
|
6.1 |
Specifications .................................................................................................................................................... |
67 |
6.2 |
Glossary – Standard Definitions........................................................................................................................ |
68 |
6.3 |
Index ................................................................................................................................................................. |
69 |
Version 2/29/2008 |
8 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Panel
POWER ‘VIZIO’ LIGHT – The VIZIO name lights white when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.
1.2 Right Side Panel Controls
POWER ( 
) – Switch the VW42L FHDTV10A on by pressing the button once. Press the button again to turn the VW42L FHDTV10A off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this button will return to the previous menu level.
CHANNEL +/- – Use these buttons to step up or down the TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus.
VOLUME +/- – Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus.
INPUT (ENTER) – Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV1, AV2/S-Video, Component 1, Component 2, RGB, HDMI 1, HDMI 2, and HDMI 3. Once you have stepped through the entire sequence, you will return to the beginning.
Version 2/29/2008 |
9 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
1.3 Rear Panel Connections
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
9 |
|
|
|
|
|
1 |
|
|
2 |
|
|
4 |
|
|
|
|
|
|
7 |
|
|
|
|
11 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
5 |
|
|
|
|
8 |
|
|
|
10 |
|
12 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.AC IN – Plug-in the supplied AC Power Cord here.
2.SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment.
3.HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection.
4.HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection.
5.HDMI 3 – Connect a third source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. . Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).
6.RGB PC – Connect the video and audio from a computer here. The blue color band on the rear of the TV indicates this connection. A cable with a 1/8” mini plug stereo connector at the end connecting to the TV is needed if sound is also transmitted with this signal.
7.COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The green color band on the rear of the TV indicates this connection.
8.COMPONENT 2 (YPb/CbPr/Cr with Audio L/R) – Connect the secondary source for component video devices such as a DVD Player or set top box here. From left to right, use green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The purple color band on the rear of the TV indicates this connection.
9.AV1 IN – Connect a source for composite, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. The yellow band on the rear of the TV indicates this connection.
10.DTV – Connect to an antenna or digital cable (no Cable Box) for Digital TV.*
11.OPTICAL DIGITAL AUDIO OUT –When a digital audio signal is associated with an input which is selected for viewing, the digital audio associated with digital programming will be available on this SPDIF Optical connector for connection to your home theatre system. The white color band on the rear of the TV indicates this connection.
12.ANALOG AUDIO OUT – Connect the audio from the LCD HDTV to an external device, such as a home theatre system, external amplifier or stereo. Speakers cannot be connected directly to here. The white color band on the rear of the TV indicates this connection.
*For digital TV stations in your area visit www.antennaweb.org.
Version 2/29/2008 |
10 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
1.4Left Side Connections
1.AV2/S-VIDEO IN – Connect the secondary source for composite video devices; such as a VCR, Video Camera or video game. Use the white and red connectors to connect the external audio from the same source. The S-Video, if connected, will take priority over the video of the RCA connector; keep in mind that the audio (white and red) connectors need to be connected to the source in order to listen to the program being watched.
Version 2/29/2008 |
11 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
1.5 VIZIO Remote Control
GUIDE – This button displays program information. Press this button once when in TV mode and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen will display the selected input plus the definition of the signal; for example, HDMI 720p, HDMI 1080i, etc.
POWER ( 
) – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select AV1 and AV2 (either Composite or S-Video) input.
COMP – Press this button to select the Component (YPbPr) input. By pressing this button repeatedly you will be switching from Component 1 to Component 2 and vice versa.
HDMI – Press this button to select the HDMI input. By pressing it repeatedly you will go through the three (HDMI 1, HDMI 2 and HDMI 3) inputs in sequence.
MENU – Use this button for the On-Screen Display (OSD) menu. When it is used within a menu selection, pressing this key will help you to make the selection of the feature to be adjusted after it has been highlighted.
-These labeled buttons are used to navigate the OSD menu. When navigating the OSD menu, the arrows control the direction up and down or left and right. They will also be used as value settings when the slide bar is shown on the screen and option settings to turn a feature off or on.
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel. If the OnScreen Display (OSD) menu is being used, this button will allow you to get back to previous menu screen or out to your program when you press it repeatedly.
VOL ▲/▼ – This button turn the volume up or down.
CH ▲/▼ – This button change the channels up or down.
NUMBER BUTTON PAD – Use these buttons to select a channel or enter a password.
INPUT – This button allows the user to cycle through the inputs. Repeatedly pressing of this button will step you through the input sources in the following sequence: TV, AV1, AV2/S-VIDEO, Component1, Component2, RGB, HDMI1, HDMI2, and HDMI3. Once you have stepped through the entire sequence, you will return to the beginning.
- (DASH) – When selecting a digital channel directly use this button for the separation of main and sub-channels. For example, channel 28-2 would be selected by the button sequence 2 8 ENTER 2.
Version 2/29/2008 |
12 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
1.5.1 Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations. Keep the batteries away from children and pets.
1.5.2 Remote Control Range
Point the remote control at the remote control sensor to transmit the commands. Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the receiver window, 30° to the left and right, 20° up and down.
1.5.3 VIZIO Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries. Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
1.5.4 Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV units), first try 11758 and then, if that does not work, 10178 or 01377. If your cable or satellite remote uses a 4-digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3- digit code (Echostar or Dish Network for example), use code 627.
Note: Some buttons may not function as expected on your cable or satellite remote. Typically power, volume and mute will work.
Version 2/29/2008 |
13 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO VW42L FHDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear |
|
|
|
|
|
|
|
Connection |
|
|
Connector |
|
Panel |
|
|
Description |
|
|
|
|
Quality (type) |
|
|
|
Color |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
Codes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Best (digital)
HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, alldigital audio/video interface. HDMI provides an
White interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and an audio and/or video monitor, such as a digital television (DTV), over a single cable.
|
Best |
|
|
|
|
|
|
|
|
|
DTV Coaxial RF. When used for MPEG2 encoded |
|
|
|
|
|
|
|
|
|
|
||||
|
(digital) |
|
|
|
|
|
|
|
|
|
bit streams from ATSC broadcast programming, this |
|
|
|
|
|
|
|
|
|
|
input takes advantage of the High Definition content. |
|||
|
- - - - - - - - - - - - |
|
|
|
|
|
|
|
Black |
|
||
|
|
|
|
|
|
|
|
|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
|||
|
Good |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
TV Coaxial RF. This is the connection for standard |
|||
|
|
|
|
|
||||||||
|
(analog) |
|
|
|
|
|
|
|
|
NTSC TV using antenna or cable. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB PC (VGA) – This video input has separate red, |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Best |
|
|
|
|
|
|
Blue |
|
green and blue |
color components. The signal |
|
|
(analog) |
|
|
|
|
|
|
|
|
carries horizontal and vertical sync information on |
||
|
|
|
|
|
|
|
|
|
the green signal. |
This is most commonly used for |
||
|
|
|
|
|
|
|
|
|
|
|
PC input. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Component - The video signal is separated into |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Better |
|
|
|
|
|
|
|
Green |
|
three signals, one containing the black-and-white |
|
|
|
|
|
|
|
|
|
|
information and the other two containing the color |
|||
|
|
|
|
|
|
|
|
and |
|
|||
|
(analog) |
|
|
|
|
|
|
|
|
information. This enhancement over S-Video takes |
||
|
|
|
|
|
|
|
|
Purple |
|
|||
|
|
|
|
|
|
|
|
|
|
advantage of the superior picture provided by |
||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
progressive scan DVD players and HDTV formats. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Good (analog)
Good (analog)
Yellow |
|
Composite (AV1/AV2) – The complete video signal |
and |
|
|
Side of |
|
is carried through this single (yellow) pin connector. |
|
This is the most commonly used video connection. |
|
TV |
|
|
|
|
S-Video (AV2) – The video signal is separated into |
|
|
|
Left hand |
|
two signals, one containing the black-and-white |
|
information and the other containing the color |
|
side of |
|
information. Separating the color in this way avoids |
TV |
|
‘cross color’ effects where closely spaced black and |
|
|
white lines are erroneously displayed in color. It also |
|
|
enables text to be displayed more sharply. |
|
|
|
Note: For more info refer to the Quick Start Guide
Version 2/29/2008 |
14 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
2.2Connecting Coaxial (RF)
2.2.1Using Your Antenna or Digital Cable for DTV
/TV
1.Turn off the power to the HDTV.
2.Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector.
3.Turn on the power to the HDTV.
4.Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
Note:
a)Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator.
b)Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed information.
c)Make sure the antenna and coaxial cable are correctly grounded.
d)For Professional antenna installation contact us at www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623).
2.2.2Using the Antenna or Cable through your
VCR
1.Turn off the power to the HDTV and VCR.
2.Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV.
3.Turn on the power to the HDTV and VCR.
4.Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.
Version 2/29/2008 |
15 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
2.3Connecting Your HDTV Set-Top Box
2.3.1Using HDMI
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your HDTV Set-Top Box (Best):
1.Turn off the power to the HDTV and HDTV Set-Top Box.
2.Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input (white color area) at the rear of the HDTV.
3.Turn on the power to the HDTV and HDTV Set-Top Box.
4.Select HDMI 1 using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.
5.If HDMI 1 is being used, you can select either HDMI 2 or HDMI3; following Steps 1 through 3 and then selecting either HDMI 2 or HDMI 3 in Step 4.
Note:
a)The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.
b)Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 2/29/2008 |
16 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
For HDTV Set-Top Boxes with DVI:
1.Turn off the power to the HDTV and HDTV Set-Top Box.
2.Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.
3.Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the HDMI input (white area) at the rear of the HDTV.
4.Turn on the power to the HDTV and HDTV Set-Top Box.
5.Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.
Note:
a)The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection.
b)Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 2/29/2008 |
17 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
2.3.2 Using Component Video
Connecting your HDTV Set-Top Box (Better):
1.Turn off the power to the HDTV and HDTV Set-Top Box.
2.Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
3.Connect the Pb (blue color) connector on your HDTV Set-Top Box to the corresponding Pb (blue color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
4.Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
5.Using an audio cable (white and red connectors), connect the cable to the audio output connectors associated with the Component output on your HDTV Set-Top Box and connect the other end to the audio connectors associated with the Component 1 input (green color area) at the rear of the HDTV.
6.Turn on the power to the HDTV and HDTV Set-Top Box.
7.Select Component 1 using the INPUT button on the remote or side of the HDTV, or directly by pressing the Component button on the Remote Control.
8.If Component 1 is being used, then use Component 2 as the input and follow Steps 1 through 6; selecting Component 2 in Step 7.
Note:
Refer to your HDTV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator.
Version 2/29/2008 |
18 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
2.4Connecting Your Basic Set-Top Box
2.4.1Using Composite Video
1.Turn off the power to the HDTV and Set-Top Box.
2.Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV1 (yellow color area) input at the rear of the HDTV.
3.Using the white and red connectors, connect the cable to the audio output connectors associated with the Video
output on your Set-Top Box and connect the other end to the audio connectors associated with the AV1 (yellow color area) input at the rear of the HDTV.
4.Turn on the power to the HDTV and Set-Top Box.
5.Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by pressing the AV button on the Remote Control.
2.4.2Using Coax (RF)
1.Turn off the power to the HDTV and Set-Top Box.
2.Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the DTV/TV input at the rear of the HDTV.
3.Turn on the power to the HDTV and Set-Top Box.
4.Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
5.The most common channels; in which your TV must be at, are either channel3 or channel 4. Please contact your signal provider to verify what channel the TV must be at.
Note: Refer to your Set Top Box user manual for more information about selecting the video or RF output of the product.
Version 2/29/2008 |
19 |
|
www.VIZIO.com |
VIZIO VW42L FHDTV10A User Manual
2.5 Connecting Your DVD Player
You have several options for connecting your DVD player to your VW42L FHDTV10A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you.
2.5.1 Using HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VW42L FHDTV10A for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your DVD Player (Best):
1.Turn off the power to the HDTV and DVD player.
2.Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI Input (white color area) at the rear of the HDTV.
3.Turn on the power to the HDTV and DVD player.
4.Select HDMI 1 using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote Control.
5.If HDMI 1 input is already being used, please select either HDMI 2 or HDMI3 and follow Steps 1 through 4.
Version 2/29/2008 |
20 |
|
www.VIZIO.com |
For DVD Players with DVI:
VIZIO VW42L FHDTV10A User Manual
1.Turn off the HDTV and DVD player.
2.Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.
3.Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV.
4.Turn on the power to the HDTV and your DVD player.
5.Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by pressing the HDMI button on the Remote.
Note: Refer to your DVD player user manual for more information about the video output requirements of the product.
Version 2/29/2008 |
21 |
|
www.VIZIO.com |
Loading...