Vivotek AW-FET-080A-120 User Manual

AW-FET-080A PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-FET-080A is a 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W (per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 115 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch	* 1x Quick Installation Guide
* 1x rack mount kit	* 1x power cord (type by the shipped-to area)

IMPORTANT:

1.Install the PoE switch in a ventilated and dry place, that is free electromagnetic source, vibration, moisture, and dust.

2.Make sure the ventilation openings on the switch are not blocked.

3.Use CAT5 or 6 UTP/STP cables.

4.AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.

CONNECTION

Front Panel Rear Panel

PoE cameras / Extenders

O N

100~240V A C

O FF

Uplink

LED DEFINITIONS

POWER	Green ON	Power is on and normal.
10/100M	Green Off	Power is off.
	Green ON	Ethernet port is connected.
	Fast Flashing	Data is being transmitted or received.
PoE	Off	No connection.
	Green ON	Port is linked to a powered device.
	OFF	No device is connected.

All specifications are subject to change without noice.

Copyright © 2014 VIVOTEK INC. All rights reserved.

VIVOTEK INC.	VIVOTEK USA, INC.	VIVOTEK Netherlands B.V.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.	2050 Ringwood Avenue, San Jose, CA 95131	Busplein 36, 1315KV, Almere, The Netherlands

|T: [phone]| F: [phone]| E: [e-mail]

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

|T: [phone]| F: [phone]| E: [e-mail]