Toshiba RAS-13SKVR-E, RAS-13SAVR-E INSTALLATION MANUAL

INSTALLATION MANUAL

AIR CONDITIONER (SPLIT TYPE)

Indoor unit

RAS-13SKVR-E Series

Outdoor unit

RAS-13SAVR-E Series

Cover 025 90.indd

ENGLISH

ESPAÑOL

FRANÇAIS

ITALIANO

DEUTSCH

PORTUGUÊS

POLSKI

ÿESKY

PУCСКИЙ

HRVATSKI

MAGYAR

TÜRKÇE

NEDERLANDS

ΕΛΛΗΝΙΚΑ

SVENSKA

SUOMI

NORSK

DANSK

ROMÂNĄ

БЪЛГАРСКИ

EESTI

LATVISKI

SLOVENÿINA

SLOVENŠÿINA

1110251190

/ 3/09 9:36:35 AM

EN CONTENTS
PRECAUTIONS FOR SAFETY....................................................
INSTALLATION DIAGRAM OF INDOOR AND
OUTDOOR UNITS .......................................................................	2
Optional Installation Parts .......................................................	2
INDOOR UNIT..............................................................................	3
Installation Place .....................................................................	3
Cutting a Hole and Mounting Installation Plate .......................	3
Electrical Work ........................................................................	3
Wiring Connection...................................................................	4
Piping and Drain Hose Installation ..........................................	4
Indoor Unit Fixing ....................................................................	5
Drainage..................................................................................	5
OUTDOOR UNIT..........................................................................	5
Installation Place .....................................................................	5
Refrigerant Piping Connection ................................................	6
Evacuating ..............................................................................	6
Wiring Connection...................................................................	6
OTHERS.......................................................................................	7
Gas Leak Test .........................................................................	7
Setting of Remote Control Selector Switch .............................	7
Remote Control A-B Selection.................................................	7
Test Operation ........................................................................	7
Auto Restart Setting ...............................................................	7

ES CONTENIDOS
PRECAUCIONES SOBRE SEGURIDAD ....................................
DIAGRAMA DE INSTALACIÓN DE LA UNIDAD INTERIOR Y
EXTERIOR ...................................................................................	2
Piezas de Instalación Opcional ..............................................	2
UNIDAD INTERIOR .....................................................................	3
Lugar de Instalación................................................................	3
Corte de un Orifi cio y Montaje de la Placa de Instalación ......	3
Trabajo Eléctrico .....................................................................	3
Conexión de Cables................................................................	4
Instalación la Tubería y el Tubo de Desagüe .........................	4
Instalación de la Unidad Interior..............................................	5
Drenaje ...................................................................................	5
UNIDAD EXTERIOR ....................................................................	5
Lugar de Instalación................................................................	5
Conexión de la Tubería Refrigerante ......................................	6
Evacuación .............................................................................	6
Conexión de Cables................................................................	6
OTROS.........................................................................................	7
Comprobación de Fugas.........................................................	7
Confi guración del interruptor de selección del mando a distancia ..	7
Mando a distancia A-B Selección............................................	7
Prueba de Operación .............................................................	7
Ajuste de Reinicio Automático ................................................	7

FR SOMMAIRE
MESURES DE SÉCURITÉ...........................................................
PLAN D’INSTALLATION DES UNITÉS INTÉRIEURE ET
EXTÉRIEURE...............................................................................	2
Pièces d’Installation en Option ...............................................	2
UNITÉ INTÉRIEURE....................................................................	3
Endroit d’Installation................................................................	3
Ouverture du Trou et Montage de la Plaque d’Installation .....	3
Travaux Electriques ................................................................	3
Connexion des Câbles ............................................................	4
Installation de la Conduite et du Tuyau de Purge ...................	4
Installation de l’Unité Intérieure...............................................	5
Drainage .................................................................................	5
UNITÉ EXTÉRIEURE...................................................................	5
Endroit d’Installation................................................................	5
Connexion du Tuyau Réfrigérant.............................................	6
Evacuation ..............................................................................	6
Connexion des Câbles ............................................................	6
AUTRES.......................................................................................	7
Test de Fuite Gaz ....................................................................	7
Réglage du sélecteur de télécommande.................................	7
Sélection de télécommande A-B .............................................	7
Opération du Test ...................................................................	7
Réglage de la Remise en Marche Automatique .....................	7

IT INDICE
PRECAUZIONI PER LA SICUREZZA .........................................
SCHEMA DI INSTALLAZIONE DELL’ UNITÀ INTERNA
E DELL’ UNITÀ ESTERNA..........................................................	2
Componenti di Installazione Opzionali ...................................	2
UNITÀ INTERNA .........................................................................	3
Luogo per l’Installazione..........................................................	3
Apertura di un Foro e Installazione della Lastra di Installazione...	3
Lavori Elettrici..........................................................................	3
Collegamento dei Cavi ............................................................	4
Installazione dei Tubi e del Tubo di Scarico ............................	4
Installazione dell’Unità Interna ................................................	5
Scarico ....................................................................................	5
UNITÀ ESTERNA ........................................................................	5
Luogo per l’Installazione..........................................................	5
Collegamento dei Tubi del Refrigerante..................................	6
Evacuazione ...........................................................................	6
Collegamento dei Cavi ............................................................	6
ALTRI ...........................................................................................	7
Test per Perdite di Gas............................................................	7
Impostazione del selettore del telecomando...........................	7
Selezione A-B del telecomando ..............................................	7
Funzionamento di Prova .........................................................	7
Impostazione per la Rimessa in Funzione Automatica ...........	7

DE INHALT
SICHERHEITSVORKEHRUNGEN ..............................................
EINBAUZEICHNUNGEN FÜR INNENUND
AUSSENGERÄT..........................................................................	2
Zusätzlich erhältliche Installationsteile ...................................	2
INNENGERÄT..............................................................................	3
Aufstellungsort.........................................................................	3
Mauerdurchbruch und Befestigung der Montageplatte ..........	3
Elektrische Anschlüsse ...........................................................	3
Kabelanschlüsse .....................................................................	4
Installation von Leitungen und Kondensatschlauch ................	4
Einbau des Innengeräts ..........................................................	5
Entwässerung .........................................................................	5
AUSSENGERÄT..........................................................................	5
Aufstellungsort.........................................................................	5
Anschluß der Kühlmittelleitungen............................................	6
Entleeren ................................................................................	6
Kabelanschlüsse .....................................................................	6
SONSTIGES.................................................................................	7
Überprüfung auf Gas-Undichtigkeit.........................................	7
Einstellen des Fernbedienungs-Wahlschalters .......................	7
Fernbedienung A-B Wahl ........................................................	7
Probelauf.................................................................................	7
Automatische Wiedereinschaltung..........................................	7

PT ÍNDICE
PRECAUÇÕES RELATIVAS A SEGURANÇA............................
ESQUEMA DE INSTALAÇÃO DAS UNIDADES INTERIOR
E EXTERIOR................................................................................	2
Peças de Instalação Opcionais...............................................	2
UNIDADE INTERIOR...................................................................	3
Local de Instalação .................................................................	3
Cortar um Orifício e Montar a Placa de Instalação .................	3
Trabalhos de Electricidade......................................................	3
Ligações Eléctricas .................................................................	4
Instalação da Tubagem e do Tubo Flexível de Dreno.............	4
Colocação da Unidade Interior................................................	5
Drenagem................................................................................	5
UNIDADE EXTERIOR..................................................................	5
Local de Instalação .................................................................	5
Ligação das Condutas de Refrigeração..................................	6
Purga de Ar .............................................................................	6
Ligações Eléctricas .................................................................	6
OUTROS ......................................................................................	7
Teste de Fugas de Gás ...........................................................	7
Definição do interruptor do telecomando ................................	7
Selecção A-B do telecomando ................................................	7
Execução do Teste ..................................................................	7
Definindo de Reiniciação Automática......................................	7

PL SPIS TREŊCI
ZASADY BEZPIECZEķSTWA.....................................................
SCHEMAT INSTALACYJNY URZĆDZENIA WEWNĔTRZNEGO
I ZEWNĔTRZNEGO.....................................................................	2
Dodatkowe Czĕŋci Instalacyjne...............................................	2
URZĆDZENIE WEWNĔTRZNE ...................................................	3
Miejsce Instalacji .....................................................................	3
Wycinanie Otworu oraz Montaŧ Pãyty Instalacyjnej.................	3
Prace Elektryczne ...................................................................	3
Podãćczenie Okablowania.......................................................	4
Montaŧ Instalacji Rurowej i Wĕŧa do Odprowadzania Cieczy ..	4
Mocowanie Urzćdzenia Wewnĕtrznego ..................................	5
Odprowadzanie Cieczy ...........................................................	5
URZĆDZENIE ZEWNĔTRZNE ....................................................	5
Miejsce Instalacji .....................................................................	5
âćczenie Instalacji Rurowej Czynnika Chãodniczego ..............	6
Usuwanie Powietrza................................................................	6
Podãćczenie Okablowania.......................................................	6
INNE.............................................................................................	7
Próba Gazoszczelnoŋci...........................................................	7
Ustawianie przeãćcznika wyboru pilota....................................	7
Ustawienia przeãćcznika A-B wyboru pilota.............................	7
Próba Dziaãania.......................................................................	7
Wãćczanie Funkcji Automatycznego Wznawiania Pracy (Auto Restart) ..	7

CZ OBSAH
BEZPEÿNOSTNÍ OPATňENÍ ......................................................
SCHÉMA INSTALACE VNITňNÍ A VENKOVNÍ JEDNOTKY......	2
Volitelné Doplļky pro Instalaci ................................................	2
VNITňNÍ JEDNOTKA ..................................................................	3
Místo Instalace ........................................................................	3
Vyvrtání Otvoru a Montáž InstalaĀní Desky ............................	3
Elektrické Práce ......................................................................	3
Zapojení VodiĀś.......................................................................	4
Montáž Trubek a Vypouštėcí Hadice.......................................	4
Montáž Vnitʼnní Jednotky..........................................................	5
Odvod Vody.............................................................................	5
VENKOVNÍ JEDNOTKA..............................................................	5
Místo Instalace ........................................................................	5
Spojování Chladivového Potrubí.............................................	6
VyĀerpávání Vzduchu..............................................................	6
Zapojení VodiĀś.......................................................................	6
OSTATNİ......................................................................................	7
Zkouška Úniku Plynu...............................................................	7
Nastavení pʼnepínaĀe dálkového ovládání ...............................	7
Volba A-B na dálkovém ovládání.............................................	7
Zkušební Provoz .....................................................................	7
Nastavení Automatického Znovuspuštėní...............................	7

RU СОДЕРЖАНИЕ
MEPЫ БEЗOПACHOCTИ ...........................................................
СХЕМА УСТАНОВКИ ВНУТРЕННЕГО И НАРУЖНОГО
БЛОКОВ......................................................................................	2
Oпционaльныe Уcтaновочныe Чacти ...................................	2
BHУTPEHHИЙ БЛOК.................................................................	3
Mecто Уcтaновки ...................................................................	3
Пpоpeзaниe Отвepcтия и Монтaж Уcтaновочной Плacтины..	3
Элeктpомонтaжныe Рaботы.................................................	3
Элeктpичecкиe Cоeдинeния ................................................	4
Уcтaновкa Tpyбопpоводов и Дpeнaжной Tpyбки ................	4
Уcтaновкa Bнyтpeннeго Блокa.............................................	5
Дpeнaж ...................................................................................	5
HAPУЖHЫЙ БЛOК....................................................................	5
Mecто Уcтaновки ...................................................................	5
Подcоeдинeниe Tpyбопpоводa для Xлaдaгeнтa .................	6
Удaлeниe Воздyxa.................................................................	6
Элeктpичecкиe Cоeдинeния ................................................	6
ДPУГИE .......................................................................................	7
Пpовepкa Отcyтcтвия Утeчки Гaзa......................................	7
Уcтaновкa положeния пepeключaтeля диcтaнционного yпpaвлeния..	7
Выбор А-В на пульте ДУ .......................................................	7
Пpобнaя Экcплyaтaция.........................................................	7
Уcтaновкa Aвтомaтичecкого Повтоpного Пycкa.................	7

CR SADRŽAJ
MJERE SIGURNOSTI..................................................................
SHEMA UGRADNJE UNUTARNJIH I VANJSKIH JEDINICA.....	2
Dodatni Dijelovi za Ugradnju Prema Izboru ...........................	2
UNUTARNJA JEDINICA..............................................................	3
Mjesto Ugradnje ......................................................................	3
Izrezivanje Rupe i Postavljanje PloĀe za Ugradnju.................	3
ElektriĀni Radovi......................................................................	3
ŽiĀana Veza.............................................................................	4
Ugradnja Cijevi i Crijeva za Pražnjenje ...................................	4
UĀvršþivanje Unutarnje Jedinice .............................................	5
Ispust.......................................................................................	5
VANJSKA JEDINICA...................................................................	5
Mjesto Ugradnje ......................................................................	5
Sklop Cijevi Rashladnog Sredstva ..........................................	6
Pražnjenje ...............................................................................	6
ŽiĀana Veza.............................................................................	6
OSTALO.......................................................................................	7
Proba Isticanja Plina................................................................	7
Položaji prekidaĀa za odabir daljinskog upravljaĀa.................	7
Odabir A-B pomoþu daljinskog upravljaĀa...............................	7
Probni Rad ..............................................................................	7
Postava za Automatsko Ponovno Pokretanje .........................	7

Cover 025 90.indd 2

HU TARTALOMJEGYZÉK
BIZTONSÁGI ELłÍRÁSOK.........................................................
BELTÉRI ÉS KÜLTÉRI EGYSÉGEK ÜZEMBE HELYEZÉSE.....	2
Külön RendelhetŃ Alkatrészek ................................................	2
BELTÉRI EGYSÉG ......................................................................	3
A Felszerelés Helye.................................................................	3
Lyuk Kivágása és a Felszerelése............................................	3
Elektromos Munka...................................................................	3
Kábelezés................................................................................	4
A Csövek és a KondenzvíztömlŃ Felszerelése .......................	4
A Beltéri Egység Rögzítése.....................................................	5
Vízelvezetés............................................................................	5
KÜLTÉRI EGYSÉG......................................................................	5
A Felszerelés Helye.................................................................	5
HŝtŃközegcsŃ-csatlakozások..................................................	6
Légtelenítés ............................................................................	6
Kábelezés................................................................................	6
EGYEBEK....................................................................................	7
Tömítettségvizsgálat ...............................................................	7
A távirányító kiválasztó kapcsolójának beállítása....................	7
A távirányítón az A-B állás kiválasztása..................................	7
Tesztüzem ...............................................................................	7
Automatikus Újraindítás Beállítás............................................	7

TR úÇúNDEKúLER
GÜVENLúK ÖNLEMLERú ............................................................
úÇ VE DIû ÜNITENIN MONTAJ ûEMASI ....................................	2
ústeùe Baùlı Montaj Parçaları ..................................................	2
úÇ ÜNúTE ......................................................................................	3
Montaj Yeri...............................................................................	3
Bir Delik Açılması ve Montaj Plakasının Yerleütirilmesi...........	3
Elektrik úüi................................................................................	3
Kablo Baùlantısı ......................................................................	4
Boruların Baùlanması ve Boüaltma Hortumunun Monte edilmesi ..	4
úç Ünitenin Takılması ...............................................................	5
Su Boüaltma............................................................................	5
DIû ÜNúTE....................................................................................	5
Montaj Yeri...............................................................................	5
Soùutma Maddesi Boru Baùlantısı..........................................	6
Boüaltma .................................................................................	6
Kablo Baùlantısı ......................................................................	6
DúøERLERú..................................................................................	7
Gaz Kaçaùı Testi .....................................................................	7
Uzaktan Kumanda Seçici Düùmesinin Ayarlanması ...............	7
Uzaktan Kumanda ile A-B Seçimi............................................	7
Test úülemi ...............................................................................	7
Otomatik Yeniden Baülama Ayarı ............................................	7

/ 3/09 9:36:37 AM

NL INHOUDSOPGAVE
VEILIGHEIDSVOORZORGEN.....................................................
INSTALLATIESCHEMA VOOR BINNENEN
BUITENMODULES ......................................................................	2
Optionele Onderdelen .............................................................	2
BINNENMODULE ........................................................................	3
Installatieplaats........................................................................	3
Gat Boren en Montageplaat Bevestigen .................................	3
Elektriciteit...............................................................................	3
Bedrading................................................................................	4
Leidingen en Afvoerslang Installeren ......................................	4
Binnenmodule Bevestigen.......................................................	5
Afvoer......................................................................................	5
BUITENMODULE.........................................................................	5
Installatieplaats........................................................................	5
Koelleidingsaansluiting............................................................	6
Afvoeren .................................................................................	6
Bedrading................................................................................	6
OVERIGE .....................................................................................	7
Gaslektest ...............................................................................	7
De keuzeschakelaar van de afstandsbediening instellen........	7
Afstandsbediening keuze A-B .................................................	7
Testwerking .............................................................................	7
Automatische Herstart Instellen ..............................................	7

GR ΠΕΡΙΕXOΜΕΝΑ
ΠΡOΦΥΛΑ ΕΙΣ ΑΣΦΑΛΕΙΑΣ.......................................................
ΔΙΆΓΡΑΜΜΑ ΕΓΚΑΤΆΣΤΑΣΗΣ ΤΗΣ ΕΣΩΤΕΡΙΚΉΣ ΚΑΙ
Ε ΩΤΕΡΙΚΉΣ ΜOΝΆΔΑΣ ..........................................................	2
Πρ αιρετικά E αρτήματα Eγκατάστασης...........................	2
ΕΣΩΤΕΡΙΚΉ ΜOΝΆΔΑ...............................................................	3
Σημεί Eγκατάστασης ..........................................................	3
Κ ψιμ Τρύπας και Τ π θέτηση Πλάτης Εγκατάστασης...	3
Ηλεκτρικές Εργασίες............................................................	3
Σύνδεση Καλωδίωσης...........................................................	4
Εγκατάσταση Σωλήνωσης και Eύκαμπτ υ Σωλήνα Aπ στράγγισης..	4
Στερέωση Εσωτερικής Μoνάδας.........................................	5
Απoστράγγιση........................................................................	5
Ε ΩΤΕΡΙΚΉ ΜOΝΆΔΑ...............................................................	5
Σημείo Εγκατάστασης ..........................................................	5
Σύνδεση Ψυκτικών Σωληνώσεων ........................................	6
Εκκένωση ...............................................................................	6
Σύνδεση Καλωδίωσης...........................................................	6
ΛOΙΠΑ ..........................................................................................	7
Έλεγ+oς Διαρρoής Αερίoυ ...................................................	7
Ρύθμιση τoυ διακ πτη επιλoγής τηλε+ειριστηρίoυ ..........	7
Επιλ γή Α-Β τoυ τηλε+ειριστηρίoυ .....................................	7
Δoκιμή Λειτoυργίας ..............................................................	7
Auto Restart Ρύθμιση ...........................................................	7

SV INNEHÅLLSLFÖRTECKNING
SÄKERHETSANVISNINGAR ......................................................
INSTALLATIONSSCHEMA FÖR INOMHUSOCH
UTOMHUSENHETEN ..................................................................	2
Valfria installationskomponenter..............................................	2
INOMHUSENHETEN ...................................................................	3
Plats för montering ..................................................................	3
Skära ut ett hål och fästa monteringsplåten............................	3
Elarbeten.................................................................................	3
Ledningsdragningar.................................................................	4
Installera rör och dräneringsslang...........................................	4
Fästa inomhusenheten............................................................	5
Dränering.................................................................................	5
UTOMHUSENHETEN ..................................................................	5
Plats för montering ..................................................................	5
Anslutning av köldmedierör.....................................................	6
Vakuumsugning.......................................................................	6
Ledningsdragningar.................................................................	6
ÖVRIGT........................................................................................	7
Kontrollera gasläckor...............................................................	7
Inställning av fjärrkontrollens omkopplare...............................	7
Fjärrkontroll A-B Val.................................................................	7
Testkörning..............................................................................	7
Inställning av omstart ..............................................................	7

FI SISÄLLYSLUETTELO
VAROTOIMENPITEET.................................................................
SISÄJA ULKOYKSIKKÖJEN ASENNUSKAAVIO....................	2
Lisävarusteena saatavat asennusosat....................................	2
SISÄYKSIKKÖ.............................................................................	3
Asennuspaikka........................................................................	3
Aukon tekeminen ja asennuslevyn kiinnittäminen...................	3
Sähkötyöt ................................................................................	3
Johtoliitännät ...........................................................................	4
Putkiston ja tyhjennysletkun asentaminen ..............................	4
Sisäyksikön kiinnittäminen ......................................................	5
Vedenpoisto.............................................................................	5
ULKOYKSIKKÖ...........................................................................	5
Asennuspaikka........................................................................	5
Kylmänesteputkien liittäminen.................................................	6
Tyhjentäminen.........................................................................	6
Johtoliitännät ...........................................................................	6
MUUT ...........................................................................................	7
Kaasuvuototesti.......................................................................	7
Kauko-ohjaimen valitsinkytkimen säätäminen.........................	7
Kauko-ohjaimen A-B valinta ....................................................	7
Koekäyttö ................................................................................	7
Automaattisen uudelleenkäynnistyksen asettaminen..............	7

NO INNHOLDSFORTEGNELSE
SIKKERHETSREGLER ...............................................................
KOBLINGSSKJEMA FOR INNEOG UTENDØRSENHETEN ...	2
Ekstrautstyr .............................................................................	2
INNENHETEN ..............................................................................	3
Plassering................................................................................	3
Lage et Hull og Montere Montasjeplaten.................................	3
Elektrisk Arbeid........................................................................	3
Tilkobling av Ledninger............................................................	4
Installasjon av Rør og Avløpsslange .......................................	4
Plassering av Innendørsenheten.............................................	5
Avløp .......................................................................................	5
UTENDØRSENHET .....................................................................	5
Montasjested...........................................................................	5
Tilkobling av Kjølerørene.........................................................	6
Evakuering ..............................................................................	6
Tilkobling av Ledninger............................................................	6
ANNET .........................................................................................	7
Gasslekkasjetest .....................................................................	7
Stille fjernkontrollbryteren........................................................	7
Fjernkontroll A-B valg ..............................................................	7
Testdrift....................................................................................	7
Innstillinger for Auto Restart ....................................................	7

DK INDHOLD
SIKKERHEDSFORHOLDSREGLER...........................................
INSTALLATIONSDIAGRAM FOR INDDØRS OG UDENDØRS
ENHED.........................................................................................	2
Valgfrie installationsdele..........................................................	2
INDENDØRS ENHED ..................................................................	3
Installationssted.......................................................................	3
Skæring af et hul og montering af installationspladen.............	3
Elektrisk arbejde......................................................................	3
Tilslutning af kabel...................................................................	4
Installation af rør og drænrør...................................................	4
Fastsætning af den indendørs enhed......................................	5
Dræning...................................................................................	5
UDENDØRS ENHED ...................................................................	5
Installationssted.......................................................................	5
Kølerørsforbindelsen...............................................................	6
Evakuering ..............................................................................	6
Tilslutning af kabel...................................................................	6
ANDET .........................................................................................	7
Gaslækagekontrol ...................................................................	7
Indstilling af fjernbetjeningskontakten .....................................	7
Valg af fjernbetjening A-B ........................................................	7
Testdrift ...................................................................................	7
Auto-omstartsindstilling ...........................................................	7

RO	CON Ŏ INUT
MĄSURI DE SIGURANŎĄ...........................................................
SCHEMA DE INSTALARE A UNITĄŎILOR INTERIOARĄ ûI
EXTERIOARĄ..............................................................................		2
Piese de instalare opŏionale ....................................................		2
UNITATE INTERIOARĄ...............................................................		3
Locul de instalare ....................................................................		3
Executarea unei gąuri üi montarea plącii de instalare.............		3
Lucrąrile electrice ....................................................................		3
Racordarea cablurilor..............................................................		4
Instalarea ŏevilor üi a furtunului de evacuare...........................		4
Fixarea unitąŏii interioare.........................................................		5
Evacuarea ...............................................................................		5
UNITATEA EXTERIOARĄ ...........................................................		5
Locul de instalare ....................................................................		5
Racordarea ŏevilor de lichid refrigerent ...................................		6
Evacuarea ..............................................................................		6
Racordarea cablurilor..............................................................		6
ALTELE	........................................................................................	7
Verifi .................................................	carea scurgerilor de gaz	7
Setarea ..............................butonului selector al telecomenzii		7
Alegerea ......................................................telecomenzii A-B		7
Verifi carea .............................................................funcŏionąrii		7
Setarea ...........................Auto Restart (repornirea automatą)		7

BG СЪДЪРЖАНИЕ
ПРЕДПАЗНИ МЕРКИ ЗА БЕЗОПАСНОСТ ..............................
ДИАГРАМА ЗА ИНСТАЛИРАНЕ НА ВЪТРЕШНИЯТ И
ВЪНШНИЯТ МОДУЛ .................................................................	2
Допълнителни елементи за монтаж ....................................	2
ВЪТРЕШЕН МОДУЛ ..................................................................	3
Място за монтаж ...................................................................	3
Пробиване на отвор и монтиране на монтажната планка ..	3
Работа по електрическата система.....................................	3
Свързване на кабелите ........................................................	4
Инсталиране на тръбите и гъвкавата дренажна тръба ....	4
Фиксиране на вътрешния модул ..........................................	5
Дренаж ...................................................................................	5
ВЪНШЕН МОДУЛ ......................................................................	5
Място за монтаж ...................................................................	5
Свързване на тръбите за хладилния агент ........................	6
Създаване на вакуум ...........................................................	6
Свързване на кабелите ........................................................	6
ДРУГИ..........................................................................................	7
Тест за наличие на газови течове........................................	7
Настройване на избиращия превключвател за
дистанционно управление ....................................................	7
Избиране на настройки „А” или „В” на дистанционното
управление.............................................................................	7
Тестов режим .........................................................................	7
Настройка за автоматично рестартиране .........................	7

EE SISUKORD
OHUTUSABINÕUD......................................................................
SISEJA VÄLISSEADMETE PAIGALDUSSKEEM ....................	2
Valikulised paigaldusdetailid....................................................	2
SISESEADE.................................................................................	3
Paigalduskoht..........................................................................	3
Augu tegemine ja paigaldusplaadi monteerimine....................	3
Elektrilised tööd.......................................................................	3
Kaablite ühendamine...............................................................	4
Torustiku ja äravooluvooliku paigaldamine..............................	4
Siseseadme parandamine.......................................................	5
bravool ....................................................................................	5
VÄLISSEADE...............................................................................	5
Paigalduskoht..........................................................................	5
Jahutussegu torustiku ühendamine.........................................	6
Tühjendamine .........................................................................	6
Kaablite ühendamine...............................................................	6
MUU .............................................................................................	7
Gaasilekke test........................................................................	7
Kaugjuhtimispuldi valija seadistamine.....................................	7
Kaugjuhtimispuldi A- ja B-sätted..............................................	7
Testfunktsioon .........................................................................	7
Automaatse taaskäivitamise säte............................................	7

LV SATURS
PROFILAKTISKIE DROŠĥBAS PASĂKUMI ...............................
IEKŠTELPAS UN ĂRA AGREGĂTA MONTĂŽAS SHĎMA........	2
PapildaprĦ kojuma montăžas daƁas .........................................	2
IEKŠTELPAS AGREGĂTS..........................................................	3
Montăžas vieta ........................................................................	3
Cauruma izveide un montăžas plăksnes uzstădĦšana............	3
Elektroinstalăcijas darbi...........................................................	3
KabeƁu savienojumi .................................................................	4
CauruƁu un drenăžas šƁŗtenes uzstădĦšana............................	4
Iekštelpas agregăta piestiprinăšana........................................	5
Drenăža...................................................................................	5
ĂRA AGREGĂTS.........................................................................	5
Montăžas vieta ........................................................................	5
Aukstumaſenta cauruƁu savienojumi.......................................	6
Izsŗknďšana ............................................................................	6
KabeƁu savienojumi .................................................................	6
PAPILDINFORMĂCIJA................................................................	7
Găzes noplŗdes părbaude ......................................................	7
TălvadĦbas pults selektorpărslďga iestatĦšana........................	7
TălvadĦbas pults režĦma A/B izvďle.........................................	7
DarbĦbas părbaude .................................................................	7
DarbĦbas automătiskăs atsăkšanas funkcijas iestatĦšana ......	7

SK OBSAH
BEZPEÿNOSTNÉ ZÁSADY ........................................................
INŠTALAÿNÁ SCHÉMA VNÚTORNEJ A VONKAJŠEJ JEDNOTKY ..	2
VoliteĴné inštalaĀné diely .........................................................	2
VNÚTORNÁ JEDNOTKA ............................................................	3
Miesto inštalácie......................................................................	3
Zhotovenie diery a montáž inštalaĀnej lišty.............................	3
ElektroinštalaĀná práca...........................................................	3
Pripojenie vodiĀov ...................................................................	4
Inštalácia rúrok a odvodļovacej hadice ..................................	4
Upevnenie vnútornej jednotky.................................................	5
Odvodļovanie .........................................................................	5
VONKAJŠIA JEDNOTKA............................................................	5
Miesto inštalácie......................................................................	5
Spájanie chladiacich rúrok ......................................................	6
VyĀerpanie vzduchu ................................................................	6
Pripojenie vodiĀov ...................................................................	6
INÉ................................................................................................	7
Test unikania plynu..................................................................	7
Nastavenie prepínaĀa na diaĴkovom ovládaĀi.........................	7
VoĴba A-B na diaĴkovom ovládaĀi ............................................	7
Testovacia prevádzka..............................................................	7
Nastavenie automatického reštartu.........................................	7

SI VSEBINA
VARNOSTNI UKREPI..................................................................
NAMESTITVENA SHEMA NOTRANJE IN ZUNANJE ENOTE...	2
Izbirni namestitveni deli...........................................................	2
NOTRANJA ENOTA ....................................................................	3
Mesto za namestitev ...............................................................	3
Rezanje luknje in montaža namestitvene plošĀe ....................	3
ElektriĀarsko delo....................................................................	3
PrikljuĀitev napeljave...............................................................	4
Namestitev odvodne in ostalih cevi.........................................	4
Pritrditev notranje enote ..........................................................	5
Odvajanje ................................................................................	5
ZUNANJA ENOTA .......................................................................	5
Mesto za namestitev ...............................................................	5
PrikljuĀitev hladilnih cevi..........................................................	6
IzĀrpavanje .............................................................................	6
PrikljuĀitev napeljave...............................................................	6
DRUGO ........................................................................................	7
Preizkus uhajanja plina ...........................................................	7
Nastavitev izbirnega stikala daljinskega upravljalnika.............	7
Izbira nastavitve A-B na daljinskem upravljalniku....................	7
Preizkus delovanja ..................................................................	7
Nastavitev za samodejni ponovni zagon.................................	7

Cover 025 90.indd 3

/ 3/09 9:36:39 AM

PRECAUTIONS FOR SAFETY

For general public use

Power supply cord of parts of appliance for outdoor use shall be at least polychloroprene sheathed fl exible cord (design H07RN-F) or cord designation 245 IEC66 (1.5 mm2 or more). (Shall be installed in accordance with national wiring regulations.)

CAUTION	New refrigerant air conditioner installation

•THIS AIR CONDITIONER USES THE NEW HFC REFRIGERANT (R410A), WHICH DOES NOT DESTROY THE OZONE LAYER.

R410A refrigerant is apt to be affected by impurities such as water, oxidizing membranes, and oils because the pressure of R410A refrigerant is approx. 1.6 times of refrigerant R22. As well as the adoption of this new refrigerant, refrigerating machine oil has also been changed. Therefore, during installation work, be sure that water, dust, former refrigerant, or refrigerating machine oil does not enter the refrigeration cycle of a new-refrigerant air conditioner.

To avoid mixing refrigerant and refrigerating machine oil, the sizes of charging port connecting sections on the main unit are different from those for the conventional refrigerant, and different size tools are also required. For connecting pipes, use new and clean piping materials with highpressure withstand capabilities, designed for R410A only, and ensure that water or dust does not enter. Moreover, do not use any existing piping as its pressure withstand may be insuffi cient and may contain impurities.

CAUTION	To disconnect the appliance from the main power supply

This appliance must be connected to the main power supply by means of a circuit breaker or a switch with a contact separation of at least 3 mm in all poles.

The installation fuse (25A) must be used for the power supply line of this air conditioner.

DANGER

•FOR USE BY QUALIFIED PERSONS ONLY.

•TURN OFF MAIN POWER SUPPLY BEFORE ATTEMPTING ANY ELECTRICAL WORK. MAKE SURE ALL POWER SWITCHES ARE OFF. FAILURE TO DO SO MAY CAUSE ELECTRIC SHOCK.

•CONNECT THE CONNECTING CABLE CORRECTLY. IF THE CONNECTING CABLE IS CONNECTED WRONGLY, ELECTRIC PARTS MAY BE DAMAGED.

•CHECK THE EARTH WIRE THAT IT IS NOT BROKEN OR DISCONNECTED BEFORE INSTALLATION.

•DO NOT INSTALL NEAR CONCENTRATIONS OF COMBUSTIBLE GAS OR GAS VAPORS. FAILURE TO FOLLOW THIS INSTRUCTION CAN RESULT IN FIRE OR EXPLOSION.

•TO PREVENT OVERHEATING THE INDOOR UNIT AND CAUSING A FIRE HAZARD, PLACE THE UNIT WELL AWAY (MORE THAN 2 M) FROM HEAT SOURCES SUCH AS RADIATORS, HEATERS, FURNACE, STOVES, ETC.

•WHEN MOVING THE AIR CONDITIONER FOR INSTALLING IT IN ANOTHER PLACE AGAIN, BE VERY CAREFUL NOT TO GET THE SPECIFIED REFRIGERANT (R410A) WITH ANY OTHER GASEOUS BODY INTO THE REFRIGERATION CYCLE. IF AIR OR ANY OTHER GAS IS MIXED IN THE REFRIGERANT, THE GAS PRESSURE IN THE REFRIGERATION CYCLE BECOMES ABNORMALLY HIGH AND IT RESULTINGLY CAUSES BURST OF THE PIPE AND INJURIES ON PERSONS.

•IN THE EVENT THAT THE REFRIGERANT GAS LEAKS OUT OF THE PIPE DURING THE INSTALLATION WORK, IMMEDIATELY LET FRESH AIR INTO THE ROOM. IF THE REFRIGERANT GAS IS HEATED BY FIRE OR SOMETHING ELSE, IT CAUSES GENERATION OF POISONOUS GAS.

WARNING

•Never modify this unit by removing any of the safety guards or bypassing any of the safety interlock switches.

•Do not install in a place which cannot bear the weight of the unit. Personal injury and property damage can result if the unit falls.

•Before doing the electrical work, attach an approved plug to the power supply cord. Also, make sure the equipment is properly earthed.

•Appliance shall be installed in accordance with national wiring regulations.

If you detect any damage, do not install the unit. Contact your TOSHIBA dealer immediately.

CAUTION

•Exposure of unit to water or other moisture before installation could result in electric shock. Do not store it in a wet basement or expose to rain or water.

•After unpacking the unit, examine it carefully for possible damage.

•Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of the unit or where noise and discharged air might disturb neighbors.

•To avoid personal injury, be careful when handling parts with sharp edges.

•Please read this installation manual carefully before installing the unit. It contains further important instructions for proper installation.

REQUIREMENT OF REPORT TO THE LOCAL POWER SUPPLIER

Please make absolutely sure that the installation of this appliance is reported to the local power supplier before installation. If you experience any problems or if the installation is not accepted by the supplier, the service agency will take adequate countermeasures.

1

1110251190-EN.indd 1

1/27/09 3:33:47 PM

INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS

170	mm
	or
	more

					Air	fi
						lter
	(Attach	to	the
				front
					panel
					.)
	6 Filter
5 Filter
3 Batteries		8 Pan head
				wood screw

2 Wireless remote control

100	mm
	or
	more

	mm or more	Hook
	65
		1 Installation
			plate
Hook		170	mm
			or
			m
			ore

Shield pipe

4 Remote control holder

Vinyl tape Apply after carrying

out a drainage test.

moreor mm	or	more
006
	100
	mm

Saddle

For the rear left and left piping

Wall

EN

Insert the cushion between the indoor unit and wall, and tilt the indoor unit for better operation.

Do not allow the drain hose to get slack.

Cut the piping hole sloped slightly.

Make sure to run the drain hose sloped downward.

The auxiliary piping can be connected to the left, rear left, rear right, right, bottom right or bottom left.

Right

Rear right

Left

Bottom Rear

right left

Bottom left

Insulate the refrigerant pipes separately with insulation, not together.

or	more

600	mm

Remark :

•Detail of accessory and installation parts can see in the accessory sheet.

•Some pictures might be different from the actual parts.

Extension drain hose (Not available,

provided by installer)

6	00	mm
		or
		mo
		re

6 mm thick heat resisting polyethylene foam

Optional Installation Parts

	Part		Parts name	Q’ty
	code
		Refrigerant piping		One
	A	Liquid side	: Ø6.35 mm
				each
		Gas side	: Ø9.52 mm
	B	Pipe insulating material		1
		(polyethylene foam, 6 mm thick)
	C	Putty, PVC tapes		One
				each

Fixing bolt arrangement of outdoor unit

•Secure the outdoor unit with fi xing bolts and nuts if the unit is likely to be exposed to a strong wind.

•Use Ø8 mm or Ø10 mm anchor bolts and nuts.

•If it is necessary to drain the defrost water, attach drain nipple 9 and cap water proof ! to the bottom plate of the outdoor unit before installing it.

	108 mm			125 mm
	28 mm		mm	Air inlet
		25
mm	86 mm			102 mm
320

Air outlet

90 mm

600 mm

Drain outlet

2

1110251190-EN.indd 2

1/27/09 3:33:48 PM

INDOOR UNIT

Installation Place

•A place which provides the spaces around the indoor unit as shown in the diagram

•A place where there are no obstacles near the air inlet and outlet

•A place which allows easy installation of the piping to the outdoor unit

•A place which allows the front panel to be opened

•The indoor unit shall be installed as top of the indoor unit comes to at least 2 m height. Also, it must be avoided to put anything on the top of the indoor unit.

CAUTION

•Direct sunlight to the indoor unit’s wireless receiver should be avoided.

•The microprocessor in the indoor unit should not be too close to RF noise sources.

(For details, see the owner’s manual.)

Remote control

•A place where there are no obstacles such as a curtain that may block the signal from the indoor unit

•Do not install the remote control in a place exposed to direct sunlight or close to a heating source such as a stove.

•Keep the remote control at least 1 m apart from the nearest TV set or stereo equipment. (This is necessary to prevent image disturbances or noise interference.)

•The location of the remote control should be determined as shown below.

unit	(Side view)	(Top view)
			Indoor unit
Indoor
			4	5°		°
					5
					4
	°		Reception
	5
	7
	Reception	Remote	range			Remote
		control
	range					control

Cutting a Hole and Mounting

Installation Plate

Cutting a hole

When installing the refrigerant pipes from the rear

When the installation plate is directly mounted on the wall

1.Securely fit the installation plate onto the wall by screwing it in the upper and lower parts to hook up the indoor unit.

2.To mount the installation plate on a concrete wall with anchor bolts, use the anchor bolt holes as illustrated in the below figure.

3.Install the installation plate horizontally in the wall.

CAUTION

When installing the installation plate with a mounting screw, do not use the anchor bolt holes. Otherwise, the unit may fall down and result in personal injury and property damage.

Installation plate

(Keep horizontal direction.)

Anchor bolt

Projection

15 mm or less

5 mm dia. hole

7 Mounting screw Ø4 x 25R

Clip anchor (local parts)

CAUTION

Failure to fi rmly install the unit may result in personal injury and property damage if the unit falls.

•In case of block, brick, concrete or similar type walls, make 5 mm dia. holes in the wall.

•Insert clip anchors for appropriate mounting screws 7.

NOTE

•Secure four corners and lower parts of the installation plate with 4 to 6 mounting screws to install it.

Electrical Work

1.The supply voltage must be the same as the rated voltage of the air conditioner.

2.Prepare the power source for exclusive use with the air conditioner.

80 100 180

	Pipe hole
	65 mm
The center of the pipe hole
is above the arrow.	100 mm

1.After determining the pipe hole position on the mounting plate (¨), drill the pipe hole (Ø65 mm) at a slight downward slant to the outdoor side.

NOTE

•When drilling a wall that contains a metal lath, wire lath or metal plate, be sure to use a pipe hole brim ring sold separately.

Mounting the installation plate

Anchor bolt holes

	62	82.5
	Hook	floor
	170	from
		moreorm2
	85

		Hook	1
Hook			Installation
Pipe hole	Thread		Pipe hole plate
		7 Mounting screw
Indoor unit	Weight

NOTE

• Wire type : More than H07RN-F or 245 IEC66

CAUTION

•This appliance can be connected to the mains in either of the following two ways.

(1)Connection to fixed wiring:

A switch or circuit breaker which disconnects all poles and has a contact separation of at least 3 mm must be incorporated in the fixed wiring. An approved circuit breaker or switches must be used.

(2)Connection with power supply plug:

Attach power supply plug with power cord and plug it into wall outlet. An approved power supply cord and plug must be used.

NOTE

• Perform wiring works so as to allow a general wiring capacity.

3

1110251190-EN.indd 3

1/27/09 3:33:49 PM

Wiring Connection

How to connect the connecting cable

Wiring of the connecting cable can be carried out without removing the front panel.

1.Remove the air inlet grille.

Open the air inlet grille upward and pull it toward you.

2.Remove the terminal cover and cord clamp.

3.Insert the connecting cable (according to the local cords) into the pipe hole on the wall.

4.Take out the connecting cable through the cable slot on the rear panel so that it protrudes about 15 cm from the front.

5.Insert the connecting cable fully into the terminal block and secure it tightly with screws.

6.Tightening torque : 1.2 N·m (0.12 kgf·m)

7.Secure the connecting cable with the cord clamp.

8.Fix the terminal cover, rear plate bushing and air inlet grille on the indoor unit.

CAUTION

•Be sure to refer to the wiring system diagram labeled inside the front panel.

•Check local electrical cords and also any specifi c wiring instructions or limitations.

Cord clamp

Terminal block

Terminal cover

Screw

Earth line

Screw

Screw

Connecting cable

110 mm

Earth line

10 mm

Connecting cable

about		10 mm
15	cm
		50 mm

Stripping length of the connecting cable

NOTE

•Use stranded wire only.

•Wire type : H07RN-F or more

How to install the air inlet grille on the indoor unit

• When attaching the air inlet grille, the contrary of the removed operation is performed.

1.Die-cutting front panel slit

Cut out the slit on the leftward or right side of the front panel for the left or right connection and the slit on the bottom left or right side of the front panel for the bottom left or right connection with a pair of nippers.

2.Changing drain hose

For leftward connection, bottom-leftward connection and rearleftward connection’s piping, it is necessary to change the drain hose and drain cap.

How to remove the drain hose

•The drain hose can be removed by removing the screw securing the drain hose and then pulling out the drain hose.

•When removing the drain hose, be careful of any sharp edges of steel plate. The edges can injuries.

•To install the drain hose, insert the drain hose firmly until the connection part contacts with heat insulator, and the secure it with original screw.

Heat insulator

EN

Drain hose

How to remove the drain cap

Clip the drain cap by needlenose pliers and pull out.

How to fix the drain cap

1)Insert hexagon wrench (4 mm) in a center head.

2)Firmly insert the drain cap.

No gap

Insert a hexagon wrench (4 mm).

4 mm

Do not apply lubricating oil (refrigerant machine oil) when inserting the drain cap. Application causes deterioration and drain leakage of the plug.

CAUTION

Firmly insert the drain hose and drain cap; otherwise, water may leak.

In case of right or left piping

• After scribing slits of the front panel with a knife or a making-off pin, cut them with a pair of nippers or an equivalent tool.

Slit

In case of bottom right or bottom left piping

•After scribing slits of the front panel with a knife or a making-off pin, cut them with a pair of nippers or an equivalent tool.

Slit

Piping and Drain Hose Installation

Piping and drain hose forming

*Since dewing results in a machine trouble, make sure to insulate both connecting pipes. (Use polyethylene foam as insulating material.)

Rear right

Rear left					Changing drainhose	preparationPiping
Bottom left		cutting-Die	slitpanelfront
Left
Bottom right
Right

Left-hand connection with piping

•Bend the connecting pipe so that it is laid within 43 mm above the wall surface. If the connecting pipe is laid exceeding 43 mm above the wall surface, the indoor unit may unstably be set on the wall.

When bending the connecting pipe, make sure to use a spring bender so as not to crush the pipe.

Bend the connecting pipe within a radius of 30 mm.

To connect the pipe after installation of the unit (figure)

(To the forefront of flare)

	270 mm	Gas side
	230 mm	Liquid side
		Outward form of indoor unit
mm	R 30 mm (Use polisin (polyethylene)
43	core or the like for bending pipe.)
	80	Use the handle of screwdriver, etc.

4

1110251190-EN.indd 4

1/27/09 3:33:50 PM

Strong wind

NOTE

If the pipe is bent incorrectly, the indoor unit may unstably be set on the wall. After passing the connecting pipe through the pipe hole, connect the connecting pipes to the auxiliary pipes and wrap the facing tape around them.

CAUTION

•Bind the auxiliary pipes (two) and connecting cable with facing tape tightly. In case of leftward piping and rear-leftward piping, bind the auxiliary pipes (two) only with facing tape.

Indoor unit

Auxiliary pipes

Connecting cable

Installation plate

•Carefully arrange pipes so that any pipe does not stick out of the rear plate of the indoor unit.

•Carefully connect the auxiliary pipes and connecting pipes to one another and cut off the insulating tape wound on the connecting pipe to avoid double-taping at the joint; moreover, seal the joint with the vinyl tape, etc.

•Since dewing results in a machine trouble, make sure to insulate both connecting pipes. (Use polyethylene foam as insulating material.)

•When bending a pipe, carefully do it, not to crush it.

Indoor Unit Fixing

1.Pass the pipe through the hole in the wall and hook the indoor unit on the installation plate at the upper hook.

2.Swing the indoor unit to right and left to confirm that it is firmly hooked up on the installation plate.

3.While pressing the indoor unit onto the wall, hook it at the lower part on the installation plate. Pull the indoor unit toward you to confirm that it is firmly hooked up on the installation plate.

Hook here.

1

1 Installation plate

2

Hook

Press (unhook)

• For detaching the indoor unit from the installation plate, pull the indoor unit toward you while pushing its bottom up at the specified parts.

Push Push

Drainage

1. Run the drain hose sloped downwards.

NOTE

• The hole should be made at a slight downward slant on the outdoor side.

	Do not form the
Do not rise the	drain hose into
drain hose.	a wavy shape.

50 mm or more

Do not put the	Do not put the
drain hose end	drain hose end
into water.	in the drainage ditch.

2.Put water in the drain pan and make sure that the water is drained out of doors.

3.When connecting extension drain hose, insulate the connecting part of extension drain hose with shield pipe.

		Shield pipe
	Drain hose	Extension drain hose
		Inside the room

CAUTION

Arrange the drain pipe for proper drainage from the unit.

Improper drainage can result in dew-dropping.

	This air conditioner has the structure designed	Wall
	to drain water collected from dew, which forms	Drain
	on the back of the indoor unit, to the drain pan.
		guide
	Therefore, do not store the power cord and other
	parts at a height above the drain guide.
		Space for pipes

OUTDOOR UNIT

Installation Place

•A place which provides the spaces around the outdoor unit as shown in the diagram

•A place which can bear the weight of the outdoor unit and does not allow an increase in noise level and vibration

•A place where the operation noise and discharged air do not disturb your neighbors

•A place which is not exposed to a strong wind

•A place free of a leakage of combustible gases

•A place which does not block a passage

•When the outdoor unit is to be installed in an elevated position, be sure to secure its feet.

•An allowable length of the connecting pipe is up to 20 m.

•An allowable height level is up to 10 m.

•A place where the drain water does not raise any problems

CAUTION

1.Install the outdoor unit without anything blocking the air discharging.

2.When the outdoor unit is installed in a place always exposed to strong wind like a coast or on a high storey of a building, secure the normal fan operation using a duct or a windshield.

3.In particularly windy areas, install the unit such as to avoid admission of wind.

4.Installation in the following places may result in trouble. Do not install the unit in such places.

•A place full of machine oil

•A saline-place such as the coast

• A place full of sulfide gas

• A place where high-

frequency waves are likely to be generated as from audio

equipment, welders, and medical equipment

5

1110251190-EN.indd 5

1/27/09 3:33:51 PM