|
Contents |
|
1 |
INSTRUCTIONS FOR USE.............................................. |
32 |
2 |
SAFETY PRECAUTIONS................................................. |
34 |
3 |
ENVIROMENTAL RESPONSIBILITY............................... |
36 |
4 |
INSTALLATION ................................................................ |
37 |
5 |
DESCRIPTION OF CONTROLS ...................................... |
39 |
6 |
USING THE OVEN........................................................... |
45 |
7 |
AVAILABLE ACCESSORIES ........................................... |
47 |
8 |
COOKING HINTS............................................................. |
48 |
9 |
CLEANING AND MAINTENANCE ................................... |
54 |
10 |
EXTRAORDINARY MAINTENANCE ............................... |
56 |
INSTRUCTIONS FOR THE USER: these contain user advice, the description of the controls and the correct procedures for cleaning and maintenance of the appliance.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the authorized person who must install the appliance, set it functioning and carry out an inspection test.
@Further information about the products can be found at www.smeg.com
3
Instructions for safety and use
1. INSTRUCTIONS FOR USE
This manual is an integral part of the appliance and must therefore be kept in its entirety and in an accessible place for the whole working life of the appliance.
We recommend reading this manual and all the information it contains carefully before using the appliance. Installation must be carried out by qualified personnel in accordance with the standards in force. This appliance is intended for domestic use and conforms to the EEC directives currently in force. The appliance has been built to carry out the following function: cooking food; all other uses are considered unsuitable.
The manufacturer declines all responsibility for uses other than those indicated.
This appliance has been manufactured to cook food, do not use the appliance to heat rooms.
Do not obstruct ventilation openings and heat dispersal slots.
Do not rest any weight or sit on the open door of the appliance.
The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.
Do not remove this plate for any reason.
Before the appliance is put into operation, all protective films applied inside or outside must be removed.
Take care that no objects are stuck in the door of the oven.
The appliance becomes very hot during use. Suitable heat-proof gloves should be worn for all operations.
4
Instructions for safety and use
Do not use metallic sponges or sharp scrapers: they will damage the surface.
Use ordinary non-abrasive products, with the aid of wooden or plastic utensils if necessary. Rinse thoroughly and dry with a soft cloth or chamois leather.
Do not allow residues of sugary foods (such as jam) to set inside the oven. If left to set for too long, they might damage the enamel lining of the oven.
Do not use plastic kitchenware or containers. The high temperatures inside the oven could melt the plastic, damaging the appliance.
Do not use sealed tins or containers in the appliance. Overpressure may occur inside the containers during cooking, creating a danger of explosion.
Do not leave the appliance unattended during cooking operations where fats or oils could be released.
Fats and oils may catch fire.
Do not cover the bottom of the oven with aluminium or tin foil sheets during cooking and do not place pans or trays on it to avoid damage to the enamelled surface.
If the surfaces are still very hot during cooking, do not pour water directly onto the trays. The steam could cause severe burns and damage enamelled surfaces.
All cooking operations must take place with the door closed.
5
Instructions for safety and use
2. SAFETY PRECAUTIONS
Consult the installation instructions for safety standards on electrical or gas appliances and for ventilation functions.
In your interests and for your safety the law requires that the installation and servicing of all electrical and gas appliances be carried out by qualified personnel in accordance with the standards in force.
Our approved installers guarantee a satisfactory job.
Gas or electrical appliances must always be uninstalled by suitably skilled people.
Before connecting the appliance to the power grid, check the data on the plate against the data for the grid itself.
Before carrying out installation/maintenance work, make sure that the appliance is disconnected from the power grid.
When linking up to the power supply network by plug:
The plug to be connected to the power supply cable and its socket must be of the same type and conform to the standards in force.
The socket must be accessible after the appliance has been built in. Never disconnect the plug by pulling on the cable.
If the power supply cable is damaged, contact the technical support service immediately and they will replace it.
The appliance must be connected to earth in compliance with electrical system safety standards.
Immediately after installation, carry out a quick test on the appliance following the instructions provided later in this manual. Should the appliance not function, disconnect it from the power supply and call the nearest technical assistance centre.
Never attempt to repair the appliance.
Do not use or leave flammable materials near the appliance or in the food warming compartment.
The appliance becomes very hot during use. Take care never to touch the heating elements inside the oven.
6
Instructions for safety and use
This appliance must not be used by people (including children) of reduced physical and mental capacity, or lacking in experience in the use of electrical appliances, unless they are supervised or instructed by adults who are responsible for their safety.
Do not let children go near the appliance when it is in operation or play with it at any time.
Do not insert pointed metal objects (cutlery or utensils) into the slots in the appliance.
If the appliance is installed on caravans or boats, it must not be used to heat rooms.
Do not use steam jets for cleaning the appliance.
The steam could reach the electronics, damaging them and causing shortcircuits.
Do not modify this appliance.
Do not spray any spray products near the household appliance while it is in operation.
Do not use spray products while the product is still hot.
The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance or by the use of non-original spare parts.
7
Instructions for disposal
3. ENVIROMENTAL RESPONSIBILITY
Our product's packaging is made of non-polluting materials, therefore compatible with the environment and recyclable. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations.
Do not discard the packaging or any part of it, or leave it unattended. It can constitute a suffocation hazard for children, especially the plastic bags.
Your old appliance also needs to be disposed of correctly.
Important: hand over your appliance to the local agency authorised for the collection of household appliances no longer in use. Correct disposal enables intelligent recovery of valuable materials.
Before disposing of your appliance it is important to remove doors and leave shelves in the same position as for use, to ensure that children cannot accidentally become trapped inside during play. It is also necessary to cut the connecting cable to the power supply network, removing it along with the plug.
8
Instructions for the installer
4. INSTALLATION
4.1 Electrical connection
Make sure the voltage and the cross-section of the power cord match the specifications indicated on the identification plate positioned on the frame of the oven door. Do not remove this plate for any reason.
The appliance must be earthed in compliance with electrical system safety regulations.
If a plug and socket connection is being used, make sure that the plug and socket are compatible. Avoid use of adapters and shunts as these could cause overheating and risk of burns.
If a fixed connection is being used, fit the power line with an omnipolar circuit breaker with a contact opening gap equal to or greater than 3 mm, in an easily accessible position close to the appliance.
For operation on 220-240V : use a H05RR-F / H05V2V2-F type three-core
cable (3 x 1.5 mm2).
The cable end to be connected to the appliance must be provided with a ground wire (yellow-green) at least 20 mm longer.
The manufacturer declines all responsibility for damage to persons or things caused by non-observance of the above prescriptions or by interference with any part of the appliance.
9
Instructions for the installer
4.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it is heat-resistant. Proceed according to the dimensions shown in Figures 1 and 2.
Fasten using the 4 screws at the corners “C” of the oven door frame, after having removed the side panels fastened by screws “A” and by supports “B” as shown in figure 3. To refit the side panels, ensure the pins inside them are correctly fitted into the supports “B”, then tighten the screws 3. “A”.
Never use the oven door to lever the oven into place when fitting.
Avoid exerting too much pressure on the oven door when open.
10
Instructions for the user
5. DESCRIPTION OF CONTROLS
5.1 Front panel
All the oven controls are grouped together on the front panel.
12 30
|
50 |
|
100 |
250 |
150 |
|
200 |
FUNCTION SELECTOR KNOB
Turn the knob in either direction to select a function from the following:
FUNCTIONS (on some models only)
NO FUNCTION SELECTED |
GRILL ELEMENT + VENTILATION |
UPPER AND LOWER HEATING |
UPPER AND LOWER HEATING |
ELEMENTS |
ELEMENTS + VENTILATION |
LOWER HEATING ELEMENT |
DEFROSTING (NO HEATING |
|
ELEMENT ENABLED) |
WIDE GRILL ELEMENT |
|
11
Loading...