Siemens WD7125, WD 7105, WD7025, WD7225 Operating Instructions

0 (0)

Operating and Installation Instructions

WD 7105 (XQG52-7105)

Silver WD7125 (XQG52-7125)

Silver WD7225 (XQG52-7225)

Silver WD7025 (XQG52-7025)

请与当地的客户服务中心或经销商联系。

服务热线向客户服务部门免费索取。谢谢

Please read this specification carefully before you use the product.

Any failure and losses caused by ignoring the above mentioned items and cautions mentioned in the operation and installation instruction are not covered by our warranty and any liability. Please keep all documents in a safety place for future reference. If you have any doubt, please contact our local service center of dealer.

If you need an English user manual, please download it from siemens web. Or you can send the E-mail to service department, or you can call up service hot line for free supply. Thanks!

Website:

http://www.siemens-ha.com.cn

Email:

Careline.China@BSHG.com

Uniform customer service number in China: 4008899999

Manufacturer: BSW Household Appliances Co., Ltd.

Address: 66.Wang Zhuang Road, Wux, Jiangsu Province, P.R.Chinai Post code: 214028

Table of Contents

Operating

Instructions

Disposal Information . . . . . . . . . . . . . . . . . . . . .. 2 Environmental Protection/Conservation Issues .. 3 Safety Precautions and Warnings . . . . . . . . . . . .4 Your New Washer-Dryer . . . . . . . . . . . . . . . . . . 6 Laundry Detergents and Additives . . . . . . . . . . .14 First Wash Cycle . . . . . . . . . . . . . . . . . . . . . . . .16 Preparing, Sorting and Loading the Laundry . . .17 Washing/Drying(Standard settings) . . . . . . . . . .21 Washing/Drying(Individual settings) . . . . . . . . . 24 During Washing/Drying . . . . . . . . . . . . . . . . . . . 29 When the Programme has Ended. . . . . . . . . . . 30 Special Applications . . . . . . . . . . . . . . . . . . . . . 32 Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . 33 Troubleshooting Minor Faults . . . . . . . . . . . . . .38 Customer Service . . . . . . . . . . . . . . . . . . . . . . .41 Programme Table . . . . . . . . . . . . . . . . . . . . . . 42 Installation, Connection and Transport . . . . . . 44

Installation

Instructions

Disposal Information

The new machine’s packaging

Dispose of packing materials in a responsible manner.

Keep packing materials out of the reach of children. Packing materials are not toys. Reprocessing and re-using materials saves raw materials and reduces waste.

All packing materials used are environment friendly and re-usable.

Cardboard boxes consist of 80% to 100% recycled paper.

Plastic wrappings are made from polythene(PE), the tapes are made from polypropylene(PP) and the CC-free packing is made from foamed polystyrene (PS).

These materials are pure hydrocarbon compounds and can be recycled.

Your old machine

Render the machine inoperable when it can no longer be used. Remove the plug from the socket and cut off the power cable.

Destroy the catch on the porthole door. Prevent children at play from being locked in and risking death by suffocation.

The old machine contains valuable materials which should be recycled.

Please make your contribution to the environment by assisting with proper disposal or recycling.

Environmental Protection

Conservation Issues

Through the economical use of energy, water and detergent, your appliance is kind to the environments as well as your household budget.

	You can increase the economy and environ-
Hints and tips	mental friendliness of your washer-dryer by
	washing/drying maximum loads:
	Cottons:	5.2/2.6kg
	Easy-Care:	2.6/1.5kg
	Delicates/Wool:	2.0kg
	Individuation:	see P42 “Programme Table”
	Single Wash:	3.5kg
	How to save energy:
	For small amounts of laundry, the automatic
	control system reduces the consumption of
	both water and energy.
	Where possible, in Cottons programmes, select
	“ intensive ” programme and set the
	temperature of 60	C instead of the 90 C

programme. The extend washing time achieves a cleaning result comparable to that of the 90 C programmes, but uses considerably less energy.

How to save water, energy and detergent:

Avoid using the Prewash function when washing lightly normally soiled laundry.

How to save energy and time:

For lightly soiled laundry, select the short programme appropriate to the type of textile.

How to save detergent:

Add detergent according to the degree of soiling, amount of laundry and water hardness, and observe the detergent manufacture s instructions.

Save energy:

If washing is then to be dried in the appliance, select the higher spin speed - because the more water that is spun out of the appliance, the less time and energy is required to dry it.

Safety Precautions and Warnings

Before using for the first time:

This machine complies with all relevant safety regulations.

Please read the enclosed documents carefully before using the washing machine for the first time. They contain important information on the installation, use and safety of the machine.

The manufacturer does not accept liability if these instructions are not followed.

Please contact an authorized technician to

install the machine and instruct the using method.

Please keep all documents in a safe place for future reference.

Install the machine in accordance with the instructions(page 44-51). Remove the transit bolts and keep them in a safe place.

The washing machine must be installed and operated in a room with the drain.

When heating, the maximum current of the washing machine is 10A,so please make sure that the power supply system(voltage; current and the cable) is applicable to the load of the applied appliance.

In order to ensure your safety, you must plug the cable into a socket which connected to earth. And please check your socket to make sure that it is connected with reliable earth correctly.

If the washing machine is visibly damaged, do not connect it up. If you are in doubt, contact your customer service representative or dealer.

This machine use thread connection water inlet hose, connect it to the water tap together with the machine according to the require of page 47. (carry out by an authorized technician)

Operation conditions:

1). Ambient temperature 0~40 C.

2). Relative humidity of air: under 95% (tested at 25 C).

When washing and drying:

When the programme has ended:

Taking care of your machine:

When transporting the machine:

Operate the machine with cold tap water only.

Your washer-dryer is designed for domestic use only, i.e. for washing machine-washable textiles in a detergent solution.

Never use flammable; explosible and/or poisonous solvents, such as gasoline; alcohol etc. As the washing lotion. Please only use the lotions suitable for using in washer-dryer available in the market.

Never wash the carpet in the washer-dryer. Never let children play with the washer-dryer. Keep pets away from the washer-dryer .

Exercise caution when pumping out hot detergent solution.

Do not fill water during washing cycle manually.

Due to the use of the condensation principle in drying, please keep the connected water tap open during the drying process.

Never open the door when drying.

When the programme has ended:

LCD screen displays “ ” (if “ Rinse hold ” was selected, see Page 30). Acoustic signals of the buzzer remind the end of the programme. Open the loading door after cutting the power of machine.

After the programme has ended, please cut the supply of power and water immediately.

Do not climb onto the washer-dryer.

Do not lean against the door.

Do not expose the machine in the place with causticity or explosibility gas.(e.g. dust, steam and gas, etc.)

Do not install the washer-dryer in a bathroom or a room very wet.

Please close the loading door correctly, if it is difficult to close it, please check if the laundry is distributed evenly in the drum.

Insert the transit bolts by technician.

Drain any water left in the machine.

Take care when moving the machine.

Do not lift the machine by any of the protruding

parts,and the loading door.

Siemens WD7125, WD 7105, WD7025, WD7225 Operating Instructions

Your New Washer-Dryer

Adding detergent/cleaning product

Dispenser I:

Detergent for pre-wash or starch.

Dispenser II:

Detergent for main wash, soaking agent, water softener, blench or stain remover.

Dispenser :

Additives, e.g. fabric softener or former. (Fill at least to lower edge of insert 1. )

Open the loading door	and close it	Drain washing solution
		if necessary.

Control Panel

“ / ”

“Start/Pause” touch control pushbutton

For starting/pausing the wash cycle (programme must have been selected). Pause function cannot be used during drying cycle.

Programme selector

For switching the machine on and off and for selecting the programme.

Can be rotated in either direction.

The programme selector is the main switch of the washer-dryer, if it be rotated while the programme is running, the programme is terminated.

Touch control buttons for additional functions

(Where required to supplement the programme)

Water plus: Greater volume of water, improve the rinsing performance.

Easy Iron: Reduce the crease of the laundry.

Extra Rinse: Additional rinse cycle.

Additional options can be combined before the programme is started.

The indicator lights of the buttons come on, if the additional options are active.

Switch off additional option: touch button again until the indicator light goes out.

Display panel

Indicates the settings which have been selected(e.g. Spin speed, Washing temperature, End in Time, Childproof lock, Maximum load, etc)

Touch control button * Select the washing temperature.

Touch control button *

Select the spin speed or Rinse hold.

Touch control button *

Select the drying mode and drying time.

Touch control button *

Select the End in time (programmes will end in this time).

iAll pushbuttons implements as Touch Control pushbuttons, you can select the desired options by touching the buttons gently. Do not touch two or more buttons in the same time except special requirments. There’s “auto-

repeat” function for display buttons (*). Keep pressing the button until the required option is displayed.

Control Panel

Programme status display

	Display		Notes
		Prewash	On if selected
		Washing	Not on if Rinse, Spin or Drain
			additional programme was selected
		Rinsing	Not on if Spin or Drain additional
			programme was selected
		Final spin/Drain	Not on if a programme with the
			“	” setting(Rinse hold)
		Drying	On if drying programme selected
		Progress bar	For the programme status
		Low water	On if the water pressure is low
		pressure
		Overdosage	On if too much detergent dispensed
		Childproof lock	On if selected
		Fan	On during the cool down phase of
			drying programme
5.2kg* Maximum load			Not on if Rinse, Spin or Drain
			additional programme was selected

60 C*			Default washing temperature,
			selected temperature or cold wash
1000*		Spin speed or	Maximum spin speed of the
---*		Rinse hold	program or selected speed
AUTO* Auto drying or			Auto drying programme or
1:00*		Drying time	Selected drying time
1:30*		Programme	Expected programme duration
		duration
Other displays at this location:
1 h*		End in time	Selected end in time
		End of programme	or
---		End of programme
		with Rinse hold or
E:16*		Error display	See page 38
		Pause
		Door can be opened
		Rinsing cycles	Not on if there is no Rinse cycle or
			Rinse cycle is not selected.
		Loading door	On if the door can be opened
			during “ Pause” period
		Pause	On if the programme in pause.

* Examples of the display, it will be changed according to your machine and selected programme.

Programme status display

Low water pressure

Overdosage

Childproof lock

Fan

Maximum load

The first row of symbols and the progress bar below form the programme status display. The progress bar consists of a frame and several segments.

When the programme has started, the almost empty bar is displayed which fills up with segments from left to right while the programme is running. The symbols indicate the programme sections which is running.

At the end of the programme all symbols have gone out and the progress bar is full.

The automatic system detects the pressure of water supply and displays if the pressure is low. The

“ Pause” function cannot be activated in this detecting period.

The automatic safety system detects excessive froth in the appliance due to a highly frothing detergent or an overdosage. At the end of the programme this is indicated in the display field by the symbol. Dispense less detergent for the next wash with similar items of washing(same degree of soiling and wash load).

Overdosage of detergent may cause excessive froth formation and impair the washing and rinsing results. A rinse cycle is automatically run.

iThe symbol goes out when the appliance switches off at the end of the programme or if the

programme is changed.

The activated childproof lock prevents the selected programme from being changed while the programme is running, see page 27.

The fan works at the last 10 minutes of drying duration for cooling the laundry.

i Do not interrupt this cooling process.

The maximum wash/dry load is displayed depending on the selected programme and additional functions, see Page 42.

Spin speed	The default spin speed is displayed after selecting
	the programme, you can get required max. spin
Max. noise of spinning 66dB(A).	speed by touching the	button.

Max. Spin (r/min)

Model

P
	r
	og
	r
s	a
s	pee		m
	pee	d		m
		d		e
				s

Cottons	Easy-care	Individu-	Delicates	Wool	Single	Single	Single
		ation			wash	rinse	spin

WD 7105	1000	800	800	600	800	800	800	1000
Silver 7125	1200	800	800	600	800	800	800	1200
Silver 7125	1200	800	800	600	800	800	800	1200
Silver 7025	1200	800	800	600	800	800	800	1200

Washing temperature	Default washing temperature is displayed after select-
	ing the programme, and it can be changed by touching
	the button	. See Page 42 “Programme Table” for
	detail temperature range for each programme.

Programme duration

When the programme has been selected, the expected programme duration(time after which the programme is expected to end) is displayed.

The programme duration is displayed in hours and minutes, e.g.

1:17 = 1 hour and 17 minutes 0:35 = 35 minutes.

When the programme starts, the programme duration counts down in minutes.

When the programme ends, the displays shows (if select “Rinse hold” function, see Page30).

iWhile the programme is running, the programme duration may be extended or reduced for the following reasons.

Reductions in time occur because of : small loads,

reduced heating time, e.g. If the water is hot, reduce the washing temperature after the programme has started.

the laundry is dry during autodrying programme

Increases in time occur because of: additional rinse cycle if excessive foam is in the laundry,

multiple spinning if the laundry is distributed poorly in the drum,

increased heating times, e.g. when the water is too cold or “high water level” was selected, water pressure too low,

very absorbent washing extends the heating duration.

the laundry is wet during autodrying programme

End in time

Drying mode and time

Rinsing cycles

Selectable end in time, see Page 26.

If you want to dry laundry in the washer-dryer, you can select the drying mode or drying time by touching the button.

Automatic drying:

During drying, the temperature determines the residual moisture. The drying time is modified according to the machine load and the type of laundry. During the drying cycle, the remaining time is constantly updated in the display.

Time-controlled drying:

The drying duration is the drying time you have set by touching the button. Please see Page 43

“Drying programme tabel ”.

i In the continuous wash+dry programme, default drying duration will add in programme duration automatically. The washing programmes will prolong 5~15 minutes for good drying performance.

iTime-controlled drying-15 minutes is the cooling down programme. If a drying process is interrupted, please select this programme to cool the laundry before you open the loading door.

On if there is(are) rinse cycle(s) in the selected programme or “ Rinse plus” function was selected, such as “ ” the number on the left of the “+” sign means the default rinse cycles of the selected programme, and the number on the right will appear only if the you select the additional function “Extra Rinse” by touching the buttons for desired times. (Maximum 3 rinsing cycles)

Programme selector

Basic programme

Programme options

Select the desired programme (see “Programme Table”).

Cottons Quick , Standard For hard-wearing fabrics.

Cottons Prewash+

An energy-intensive programme for heavily soiled hard-wearing textiles made from cotton or linen.

Cottons Intensive

Long time washing programme, for heavily soiled textiles hard-wearing textiles made from cotton or linen.

Easy-care

For easy-care fabrics made from cotton, synthetics or blended fibres.

Delicates

For delicate, washable textiles, e.g. Silk, satin, synthetic materials or blended fabrics(e.g. curtains). No subsequent spin cycle with rinsing period.

Wool

For hand or machine-washable fabrics made from wool or wool blend.

Individuation mixed , shoes

Programmes for individual requirements.

iOnly canvas shoes and netlike sport shoes(less than 2 pairs) are machine washable. Use liquid detergent to achieve better washing performance. Do not wash shoes made of leather, it may causes damage to shoes and drum.

You can select the desired washing temperature, if a high temperature was selected, such as 90 C for the protection of the drainage pipe, the hot washing solution is mixed with approx.5 liters of cold water before being drained.

Dry

White and coloured cottons and linens. High temperature drying.

Delicate drying

Reduced drying temperature.

Easy-Care laundry, such as synthetics and fabric blends, as well as cotton with drip-dry finish, e.g. viscose rayon, modern acrylic and polyester.

Single wash

Single wash cycle without subsequent rinse cycle, you can select the rinse cycle by touching the additional function button “ Extra Rinse” if desired..

	Rinse
	Rinse cycle with subsequent spin cycle for rinsing
	hand-washed items or for starching.
	Reduced spin speed.
	Spin
	Spin cycle for spinning hand-washed items after
	selection of required speed. Washing water or
	rinsing water is drained before the spin cycle.
	Drain
	Water is drained after a programme that the water
	is still in the drum, such as Rinse hold, for gentle
	treatment of delicate laundry.
Additional function	Extra Rinse
	Touch this button once, an additional rinsing cycle
	is activated, programme duration will be prolonged
	6~10 min., it depends on the selected programme.
	The max. selectable rinsing cycles is in the table
	as below:
				Default rinse		Max. Selectable
				cycle(s)		rinse cycle(s)
				quick	2	3
				quick	2	3
		Cotton		standard	3	3
		Cotton		anti-bacteria	3	3
				anti-bacteria	3	3
				prewash	3	3

		Easy-Care			3	3
		Individu- Mix			3	3
		ation		Sport shoes	2	3
			Delicates		2	3
		Wool			2	/
		Single Wash			/	3
		Single Rinse			1	3
	Less Iron
	Special spin cycle with post-spin loosening cycle.
	The laundry is left lying loosely in the drum, thus
	reducing creasing. After pressing this button, the
	washing duration and max spin speed will be
	changed.

		Cotton

	Quick	Intensive	Others
		cold-60
Duration change	+9	-1	+4
Max. Spin Speed		800

Easy-Care	Delicate	Single Wash	Single Rinse	Single Spin
+4	+6	+6	+5	+6
		600		800

Individuation

Mix

600

High water level

High water level for achieving good rinse performance. Reduce the influence of low water pressure.

Observe the maximum load for each type of fabric; Remove the laundry immediately after the spin cycle.

Laundry Detergents and

Additives

! Risk of explosion

Amount of detergent

Do not use solvent-based cleaning agents in fully automatic washing machines. Explosion hazard.

Keep detergents and additives out of the reach of children.

You can use any standard powder or liquid detergent which is suitable for automatic washing machines.

Do not use any detergent boosters containing solvents or dirt and stain-removing spraying near the machine, as these could damage the machine.

Do not use non-automatic detergent as these produce too much foam.

The best washing results will only be achieved if you add the correct amount of detergent. Observe the instructions for use shown on the detergent packing.

When using liquid detergents, you can use any measuring aids provided with the detergent, such as dosage balls of bags.

Please put the liquid detergents into correct chamber.

The amount of detergent depends on:

-water hardness

-degree of soiling

-size of the load

-amount of detergent to be added according to its manufacturer.

Dispensing the correct amount of detergent relieves the strain on the environment and ensures optimum washing results.

Filling laundry detergent and/or additive dispensers

Frequent use of insufficient detergent will eventually become noticeable as follows:

-washing appears grey or not properly clean

-grey-brown stains(grease marks) form on the washing

-scale builds up on the heating elements

Too much detergent results in:

-unnecessarily high environmental pollution

-due to the generation of too much foam, the washing is hardly agitated which leads to poor washing results.

The amount of detergent indicated on its packaging refers to a full machine load.

For small loads or less soiling, reduce the amount of detergent.

Chamber I:

Detergent for prewash, starch or pre-soaking agent.

Chamber II:

Detergent for main wash, water softener, bleach and stain removal product.

Chamber:

Additives, e.g. fabric softener of former.

-Do not fill beyond the ,, MAX mark, otherwise will be flushed into the machine together with the detergent at the start of the program.

-If the liquid additive is thick, mix with a little water before dispensing(prevents clogging of the overflow).

Pull out the detergent dispenser up to the end stop.

Add the detergent and/or additive.

Close the detergent dispenser.

+ 37 hidden pages