Loading...
User Manual
S*R65*
The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality. © Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
An administration fee may be charged in the following situations:
(a)An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual has not been read).
(b)You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Table of contents
Before Using the Product
Securing the Installation Space |
4 |
|
|
Safety Precautions |
4 |
Cleaning |
5 |
Electricity and Safety |
5 |
Installation |
6 |
Operation |
7 |
Preparations
Parts |
9 |
Control Panel |
9 |
Direct Key guide |
10 |
Function Key Guide |
11 |
Changing Brightness, Contrast and Sharpness |
|
settings |
13 |
Changing the Volume setting |
13 |
Reverse Side |
14 |
Adjusting the Product Tilt and Height |
15 |
Rotating the Monitor Screen |
15 |
Anti-theft Lock |
16 |
Precautions for moving the product |
16 |
Installing a Wall-mount Kit or Desktop Stand |
17 |
|
|
Installation |
18 |
Attaching the Stand |
18 |
Removing the Stand |
19 |
Connecting and Using a Source Device
Read below before installing the monitor. |
20 |
|
|
Connecting and Using a PC |
20 |
Connection Using the D-SUB Cable (Analog Type) 20 |
|
Connection Using the HDMI Cable |
21 |
Connection Using the HDMI-DVI Cable |
21 |
Connection Using the DP Cable |
21 |
Connecting to Headphones |
21 |
|
|
Connecting the Product to a PC as a USB HUB |
22 |
Connecting a USB device |
22 |
Utilizing the Product as a USB HUB |
22 |
Connecting the Power |
23 |
Tidying Up the Connected Cables |
24 |
|
|
Correct posture to use the product |
25 |
|
|
Driver Installation |
25 |
|
|
Setting Optimum Resolution |
25 |
Screen Setup
SAMSUNG MAGIC Bright |
26 |
|
|
Brightness |
27 |
|
|
Contrast |
27 |
|
|
Sharpness |
27 |
|
|
Color |
27 |
|
|
HDMI Black Level |
28 |
Eye Saver Mode |
28 |
|
|
Game Mode |
28 |
|
|
Response Time |
28 |
|
|
Picture Size |
29 |
|
|
Screen Adjustment |
29 |
Adjusting OSD (On Screen Display) settings
Transparency |
30 |
|
|
Position |
30 |
H-Position |
30 |
V-Position |
30 |
|
|
Language |
30 |
|
|
Display Time |
30 |
Setup and Reset
Self Diagnosis |
31 |
|
|
FreeSync |
33 |
|
|
Smart ECO Saving |
34 |
|
|
Off Timer Plus |
34 |
|
|
PC/AV Mode |
34 |
2
Table of contents
Source Detection |
34 |
|
|
Key Repeat Time |
34 |
|
|
Power LED On |
35 |
|
|
Reset All |
35 |
Information
Information |
36 |
Installing the Software
Easy Setting Box |
37 |
Restrictions and Problems with the Installation |
37 |
System Requirements |
37 |
Troubleshooting Guide
Requirements Before Contacting Samsung Customer
Service Center |
38 |
Product diagnosis (Screen issue) |
38 |
Checking the Resolution and Frequency |
38 |
Check the following. |
38 |
|
|
Q & A |
40 |
Specifications
General |
41 |
|
|
Standard Signal Mode Table |
43 |
Appendix
Responsibility for the Pay Service (Cost to |
|
Customers) |
46 |
Not a product defect |
46 |
A Product damage caused by customer's fault |
46 |
Others |
46 |
|
|
Extended warranty |
47 |
3
Chapter 01
Before Using the Product
Securing the Installation Space
Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product.
――The exterior may differ depending on the product.
|
10 cm (3.93 Inches) |
10 cm |
|
(3.93 Inches) |
|
|
|
|
10 cm |
|
10 cm |
(3.93 Inches) |
|
(3.93 Inches) |
10 cm
(3.93 Inches)
Safety Precautions
Caution |
RISK OF ELECTRIC SHOCK DO NOT OPEN |
|
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE |
|
COVER. (OR BACK) |
|
THERE ARE NO USER SERVICEABLE PARTS INSIDE. |
|
REFER ALL SERVICING TO QUALIFIED PERSONNEL. |
|
This symbol indicates that high voltage is present inside. |
|
It is dangerous to make any kind of contact with any internal part of |
|
this product. |
|
This symbol alerts you that important literature concerning operation and |
|
maintenance has been included with this product. |
Symbols
Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
4
Cleaning
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
――Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product(Service fee will be charged.)
Do not press the product screen with hands or other objects. There is a risk of damaging the screen.
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning.
1Power off the product and PC.
2Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3Wipe the product with a clean, soft and dry cloth.
‒‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the product. ‒‒ Do not spray water or detergent directly on the product.
4Wet a soft cloth in water, wing it out well, and then use the cloth to wipe the exterior of the product clean.
5Connect the power cord to the product when cleaning is finished.
6Power on the product and PC.
Electricity and Safety
Warning
•• Do not use a damaged power cord or plug, or a loose power socket.
•• Do not use multiple products with a single power socket.
•• Do not touch the power plug with wet hands.
•• Insert the power plug all the way in so it is not loose.
•• Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object.
•• Do not place the power cord or product near heat sources.
•• Clean any dust around the pins of the power plug or the power socket with a dry cloth.
Caution
•• Do not disconnect the power cord while the product is being used.
•• Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
•• Keep the power socket where the power cord is connected unobstructed.
‒‒ The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Hold the plug when disconnecting the power cord from the power socket.
5
Installation
Warning
•• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
•• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) ‒‒ The product may fall and become damaged and/or cause an injury.
‒‒ Using the product in an area with excess vibration may damage the product or cause a fire.
•• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
•• Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒‒ The product lifespan may be reduced or a fire may result.
•• Do not install the product within the reach of young children. ‒‒ The product may fall and injure children.
•• Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil pollution. And do not install or use the product in the kitchen or near the kitchen stove.
Caution
•• Do not drop the product while moving.
•• Do not set down the product on its front.
•• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
‒‒ The product may fall and become damaged and/or cause an injury. ‒‒ Install the product only on cabinets or shelves of the right size.
•• Set down the product gently.
‒‒ Product failure or personal injury may result.
•• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a place.
6
Operation
Warning
•• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
‒‒ Contact Samsung Customer Service Center for repairs.
•• To move the product, first disconnect all the cables from it, including the power cable.
•• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center.
•• Do not let children hang from the product or climb on top of it. ‒‒ Children may become injured or seriously harmed.
•• If the product is dropped or the outer case is damaged, turn off the power and disconnect the power cord. Then contact Samsung Customer Service Center.
‒‒ Continued use can result in a fire or electric shock.
•• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
‒‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury.
•• During a lightning or thunderstorm, power off the product and remove the power cable.
•• Do not drop objects on the product or apply impact.
•• Do not move the product by pulling the power cord or any cable.
•• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
•• Do not lift or move the product by pulling the power cord or any cable.
•• Do not use or keep combustible spray or an inflammable substance near the product.
•• Ensure the vents are not blocked by tablecloths or curtains. ‒‒ An increased internal temperature may cause a fire.
•• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center.
7
Caution
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
‒‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time.
•• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
•• Use the product at the recommended resolution and frequency. ‒‒ Your eyesight may deteriorate.
•• Do not hold the product upside-down or move it by holding the stand. ‒‒ The product may fall and become damaged or cause an injury.
•• Looking at the screen too close for an extended period of time can deteriorate your eyesight.
•• Do not use humidifiers or stoves around the product.
•• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.
•• Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
•• Store small accessories out of the reach of children.
•• Exercise caution when adjusting the product angle or stand height. ‒‒ Your hand or finger may get stuck and injured.
‒‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result.
•• Do not place heavy objects on the product.
‒‒ Product failure or personal injury may result.
•• When using headphones or earphones, do not turn the volume too high. ‒‒ Having the sound too loud may damage your hearing.
8
Chapter 02
Preparations
Parts
Control Panel
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
|
JOG Button |
|
|
UP |
|
LEFT |
|
RIGHT |
PRESS(ENTER) |
DOWN |
Power LED |
|
|
Function Key Guide
Parts |
Description |
|
|
|
|
JOG Button |
Multi directional button that helps navigate. |
|
――The JOG button is located on the rear left side of the product. The |
||
|
button can be used to move up, down, left or right, or as Enter. |
|
|
|
|
|
This LED is power status indicator and works as |
|
|
•• Power On (Power button): Off |
|
|
•• Power saving mode: Blinking |
|
Power LED |
•• Power Off (Power button): On |
|
――The power Indicator operation can be swapped by changing in the menu. |
||
|
||
|
(System →Power LED On) Actual models because of functional |
|
|
variation maybe haven’t this function. |
|
|
――The power button is located on the left of the rear and used to turn on |
|
|
or off the product. |
|
|
|
|
|
Press the JOG button when the screen is turned on. The Function Key |
|
Function Key Guide |
Guide will appear. To access the onscreen menu when the guide is |
|
displayed, press the corresponding direction button again. |
||
|
――Function Key Guide may vary depending on the function or product |
|
|
model. Please refer to the actual product. |
|
|
|
Return
9
Direct Key guide
――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.
――The function buttons page shows if Eye Saver Mode is enabled.
: On 
: Off
Analog mode |
HDMI, Displayport mode |
Brightness
Auto Adjustment
Volume
Features
Eye Saver Mode Off
――Analog mode option
•• 
: Adjust Brightness, Contrast, Sharpness.
•• 
: Auto Adjustment
――Changing the resolution in Display Properties will activate the Auto Adjustment function. ――This function is only availabel in Analog mode.
•• |
: Adjust Volume, Mute. |
•• |
: Display Function Key Guide. |
Brightness
Volume
Features
Eye Saver Mode Off
――HDMI, Displayport mode option
•• 
/
: Adjust Brightness, Contrast, Sharpness.
•• 
: Adjust Volume, Mute.
•• 
: Display Function Key Guide.
10
Function Key Guide
――To use the Function Key Guide, press the JOG button. Then the following window appears.
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Return
Icons |
|
|
|
Description |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selects |
to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has |
||||
|
|
|
|
|
been changed. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selects |
|
|
|
|
by moving the JOG button in the function key guide screen. |
|
|
|
|
|
This product shows the menu as an on-screen display. |
|||||
|
|
|
|
|
On screen display menu lock: Lock the on screen display menu to maintain the current settings or prevent other users from changing settings. |
|||||
|
|
|
|
|
Enable/Disable: To enable or disable the on screen display menu lock, display the “Menu” screen, move the jog button to the right to go to the next stage, and then press and hold the |
|||||
|
|
|
|
|
button to the left for10 seconds. |
|||||
|
|
|
|
|
―― If the on screen display menu lock is enabled, Brightness and Contrast can be adjusted. Eye Saver Mode is available. |
|||||
|
|
|
|
|
Information can be viewed. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selects |
|
|
|
|
by moving the JOG button in the function key guide screen. |
|
|
|
|
|
Press to enable or disable Eye Saver Mode. |
|||||
|
|
|
|
|
The items below are not available if the Eye Saver Mode function is enable. |
|||||
|
|
|
|
|
•• Picture → MAGICSAMSUNGBright, Brightness, Color, Game Mode |
|||||
|
|
|
|
|
•• System → Smart Eco Saving |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selects |
to turn the product off by moving the JOG button in the function key guide screen. |
||||
Return to the previous menu by using the JOG button to select the
icon when the Function Key Guide screen is displayed.
――Actual models because of functional variation, Function key guide options will be different.
11
When the product displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.
JOG Button |
Power saving/Non-signal mode |
|
|
UP |
Source Change |
|
|
Down |
|
|
|
PRESS(ENTER) for 2 seconds |
Power Off |
|
|
When the product displays the menu the JOG Button could be used as below.
JOG Button |
Action |
|
|
|
|
UP/DOWN |
Move the option |
|
|
|
|
|
Exit the Main menu. |
|
LEFT |
Close Sublist without saving value. |
|
|
Value decreases in the slider. |
|
|
|
|
RIGHT |
Move to sublist. |
|
Value increases in the slider. |
||
|
||
|
|
|
PRESS(ENTER) |
Save the value and close Sublist. |
|
|
|
12
Changing Brightness, Contrast and Sharpness settings
You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed.
Sharpness
Brightness |
100 |
Contrast
――The displayed image may differ depending on the model.
Brightness
――This menu is not available when MAGICSAMSUNGBright is set to Dynamic Contrast mode. ――This menu is not available when Smart Eco Saving is enabled.
――This menu is not available when Eye Saver Mode is enabled.
Contrast
――This menu is not available when MAGICSAMSUNGBright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled.
Sharpness
――This menu is not available when MAGICSAMSUNGBright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled.
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume |
50 |
Mute
――The displayed image may differ depending on the model.
――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product.
――What isAuto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak, usually due to a problem with the volume of an input device.
――To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
13
Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port |
Description |
|
|
Connect the power cord for your monitor to the POWER IN port on the back of the product.
Connects to a PC using a USB cable. Compatible with a USB cable version 3.0 or lower.
――This port can only connect to a PC.
Connect to a USB2.0 device.
Connect to a USB3.0 device.
Connects to a PC using a DP cable.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connect to a PC using the D-SUB cable.
Receives sound from a PC via an audio cable.
Connect to an audio output device such as headphones.
14
Adjusting the Product Tilt and Height
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Rotating the Monitor Screen
――You can rotate your monitor as shown below.
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1 |
2 |
3 |
•• The monitor tilt and height can be adjusted.
•• Hold the top center of the product and adjust the height carefully.
•• When adjusting the stand height, you may hear a noise. This noise is generated because the ball inside the stand slides when the stand height is adjusted. It is a normal noise and not a product malfunction.
•• Be careful not to injure your hands when rotating the monitor.
•• Be careful not to collide with around objects.
•• Be careful not to be injured when children and the elderly are operating the monitor.
4 |
5 |
6 |
•• Be sure to fully extend the stand before rotating the monitor.
•• If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged.
•• Do not rotate the monitor counterclockwise. The product may get damaged.
15
Loading...