Panasonic fv-05vk1, fv-11vk1, fv15vk1 service manual

PEG1312053CE

Version:1301

Service Manual

Ventilating Fan

(North America Market)

FV-05-11VK1

FV-11-15VK1

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer's specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacture.

We suggest to handle such parts after the static electricity prevention.

It is forbidden to touch the PCB parts by bare hands during the repairing process.

CONTENTS			PAGE
1.	Specifications	1
2.	Parts Identification	2~9
3.Wiring Diagram		10
4. Parts List		11~14

1.Specifications

Specifications for Base Model fans

		Air	Voltage	Frequency	Duct	Air volume	Noise	Speed	Power	Weight
	Model No.				diameter	at 0.1"WG
		direction	(V)	(Hz)			(sones)	(rpm)	(W)	lb.(kg)
					(inches)	(CFM)
						50	<0.3	740	3.5
	FV-05-11VK1	Exhaust	120	60	4 or 6	80	<0.3	795	5.5	10.6(4.8)
						110	0.4	915	9.5
						110	<0.3	620	7.0
	FV-11-15VK1	Exhaust	120	60	6	130	<0.3	630	10.0	10.6(4.8)
						150	<0.3	660	13.0

HVI Certified performance based on HVI Procedures 915,916,and 920.

Specifications for Multi Speed fans

		Air	Voltage	Frequency	Duct	Air volume	Noise	Speed	Power	Weight
	Model No.				diameter	at 0.1"WG
		direction	(V)	(Hz)			(sones)	(rpm)	(W)	lb.(kg)
					(inches)	(CFM)
						100	<0.3	870	8.0
						90	<0.3	835	6.5
						80	<0.3	795	5.5
						70	<0.3	760	4.3
	FV-05-11VK1	Exhaust	120	60	4 or 6	60	<0.3	745	3.6	10.6(4.8)
	(Plug-in
						50	<0.3	740	3.5
	FV-VS15VK1)
						40	<0.3	730	2.7
						30	<0.3	725	2.4
						0			0.5
						120	<0.3	625	7.4
						110	<0.3	620	7.0
						100	<0.3	615	5.6
	FV-11-15VK1					90	<0.3	610	4.9
	(Plug-in	Exhaust	120	60	6	80	<0.3	605	4.4	10.6(4.8)
	FV-VS15VK1)
						70	<0.3	600	3.8
						60	<0.3	595	3.6
						50	<0.3	590	3.1
						0			0.5

Reference performance based on HVI Procedures 915, 916,and 920. [(*) Standby wattage.]

1

2.Parts Identification

FV-05-11VK1

Main Body Section

3 B

	6
B	4
	C
	5

Main PCB Section

18

19

A

(3pcs)

B

8 2

C (23)

E

(2pcs)

13

12

A

(3pcs)

Base PCB Section

E

(2pcs)

1

7

(3pcs)

D

(4pcs)

9

E

(5pcs)

10

11

14

15

17	16

20	Ornamental Cover

E

2

2.Parts Identification

FV-05-11VK1

Main PCB Section

G

(3pcs)

21 24

E

22
G	23
(4pcs)

Base PCB Section

	30
G	31
(2pcs)

28

29 27

Condensation Sensor Module

	26	33
		Sensor Cover
	(3pcs)
		32

25

Multi-Speed Module Nite-GloTM LED Night Light Module

Motion Sensor Module

1,Please note that above parts with(No.25,31,32,33) are the optional parts bas on different customer’s request.

2,If install the motion sensor control,please remove the ornamental cover and replace the sensor cover.

3

2.Parts Identification

FV-05-11VK1

Packing Section

34

35	37

39

36

38

40

41

42

4