Setup Guide
The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by
this document is subject to a License Agreement and may not be copied to other media.
No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native Instruments.
“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instruments GmbH.
Mac, Mac OS, GarageBand, Logic, iTunes and iPod are registered trademarks of Apple
Inc., registered in the U.S. and other countries.
Windows, Windows Vista and DirectSound are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other trade marks are the property of their respective owners and use of them does not
imply any affiliation with or endorsement by them.
Document authored by: Native Instruments
Document version: 1.1 (07/2011)
Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs,
but in making this a better product.
Disclaimer
Germany
Native Instruments GmbH
Schlesische Str. 29-30
D-10997 Berlin
Germany
www.native-instruments.de
USA
Native Instruments North America, Inc.
6725 Sunset Boulevard
Los Angeles, CA 90028
USA
www.native-instruments.com
Contact
© Native Instruments GmbH, 2011. All rights reserved.
Table of Contents
Table of Contents
1 Welcome to TRAKTOR KONTROL X1 ............................................................................
1.1 What is Included in the Box? ...................................................................................................... 5
1.2 About this Setup Guide ............................................................................................................... 5
1.3 Caution .......................................................................................................................................5
1.4 Notice ......................................................................................................................................... 6
1.4.1 Disposal of the Product ............................................................................................. 6
1.4.2 Specifications Subject to Change .............................................................................. 6
1.4.3 Disclaimer ................................................................................................................. 6
2 Setup Overview .........................................................................................................
3 Installing the TRAKTOR KONTROL X1 Software on Mac OS X ........................................
3.1 Installing as Part of TRAKTOR .................................................................................................... 9
3.2 Installing the TRAKTOR KONTROL X1 Driver Only ........................................................................ 12
3.1.1 Select the Components to Install ............................................................................... 9
3.1.2 Select the Location .................................................................................................... 11
3.1.3 Complete the Software Installation ........................................................................... 12
4 Installing the TRAKTOR KONTROL X1 Software on Windows .........................................
4.1 Installing as Part of TRAKTOR .................................................................................................... 13
4.2 Installing the TRAKTOR KONTROL X1 Driver Only ........................................................................ 21
4.3 Connecting the TRAKTOR KONTROL X1 Hardware ....................................................................... 22
4.4 Ready to KONTROL ...................................................................................................................... 22
4.1.1 Confirm the Features to Install .................................................................................. 16
4.1.2 Confirm the Application Installation Path ................................................................. 16
4.1.3 Choose the Hardware Driver ...................................................................................... 18
4.1.4 Complete the Software Installation ........................................................................... 21
4.3.1 Connecting the TRAKTOR KONTROL X1 on Mac OS X .................................................. 22
4.3.2 Connecting the TRAKTOR KONTROL X1 on Windows ................................................... 22
5
7
8
13
TRAKTOR KONTROL X1 - Setup Guide - 4
Welcome to TRAKTOR KONTROL X1
What is Included in the Box?
1 Welcome to TRAKTOR KONTROL X1
1.1 What is Included in the Box?
The TRAKTOR KONTROL X1 box contains the following:
▪ The TRAKTOR KONTROL X1 controller
▪ A USB cable
▪ The software installation disc
▪ A Sample Deck overlay
▪ This Setup Guide
1.2 About this Setup Guide
This Setup Guide will help you to install and configure TRAKTOR KONTROL X1 on your
computer. If you need further information, please refer to the TRAKTOR KONTROL X1
Reference Manual that will be copied to your computer’s hard disk as a PDF file during
installation.
On Windows, find the manual as a PDF file here:
▪ Start > Program Files > Native Instruments > Traktor Kontrol X1 > Documentation
or
▪ C:\Program Files\Native Instruments\Traktor Kontrol X1 Driver\Documentation
On Mac OS X, find the manual as a PDF file here:
▪ Applications/Native Instruments/Traktor Kontrol X1 Driver/Documentation
1.3 Caution
It is important you read and understand the following instructions to make sure the TRAKTOR KONTROL X1 controller or any device connected will not be damaged during usage or
maintenance:
▪ Do not open the TRAKTOR KONTROL X1 controller or attempt to disassemble or
modify any internal parts. The TRAKTOR KONTROL X1 controller does not contain
any user-serviceable parts. If the device appears to be malfunctioning, discontinue
use immediately and have the device inspected by qualified service personnel.
TRAKTOR KONTROL X1 - Setup Guide - 5
Welcome to TRAKTOR KONTROL X1
▪ Do not expose the TRAKTOR KONTROL X1 controller to rain, use it near water or in
damp or wet conditions.
▪ Make sure no objects or liquids of any kind penetrate the unit. When cleaning the
TRAKTOR KONTROL X1 controller, use a soft, dry cloth. Never use paint thinners,
solvents, cleaning fluids, or chemical-infused wiping cloths.
▪ Never use or store the TRAKTOR KONTROL X1 controller in areas subject to extreme
temperatures (e.g., direct exposure to sunlight in an enclosed vehicle or near heatgenerating equipment), or high levels of vibration.
▪ Always let the TRAKTOR KONTROL X1 controller adapt to changed room temperature
after it has been stored in a cold environment.
▪ Do not place the TRAKTOR KONTROL X1 controller in an unstable position where it
could accidentally fall.
▪ Before moving the TRAKTOR KONTROL X1 controller, remove all connected cables.
▪ Do not use excessive force on buttons, knobs, switches and connectors.
▪ Do not place heavy objects on top of the TRAKTOR KONTROL X1 controller.
1.4 Notice
1.4.1 Disposal of the Product
Should this product become damaged beyond repair, or if you wish to dispose of it, please
observe the regulations of your area and country that relate to the disposal of electronic
products.
Notice
1.4.2 Specifications Subject to Change
The information contained in this manual is believed to be correct at the time of printing
or digital release. However, Native Instruments reserves the right to make changes to the
specifications at any time without notice or obligation to update existing units.
1.4.3 Disclaimer
Native Instruments GmbH cannot be held responsible for damage or lost or destroyed data
caused by improper use or modification of TRAKTOR KONTROL X1.
TRAKTOR KONTROL X1 - Setup Guide - 6
Setup Overview
2 Setup Overview
This section provides a quick overview of the various steps required to get your TRAKTOR
KONTROL X1 system up and running: installation, activation, updates, and configuration, all
of which will be described in greater detail in further chapters of this guide.
▪ Software installation: Insert the installation disc, locate the setup file and double-click
it in order to start the installation procedure. Carefully read and follow the on-screen
instructions, accept the License Agreements, and enter the password for your computer if prompted (Mac OS X only).
▪ Hardware installation: Attach the TRAKTOR KONTROL X1 controller to your computer,
as explained later in this document.
▪ Activation: Activate your TRAKTOR software using the Service Center application. On-
line and Offline activation methods are available. For more information about the activation procedure, please refer to the TRAKTOR 2 Reference Manual that will be copied to your computer’s hard disk as a PDF file during installation. Regardless of the
TRAKTOR software activation process, you can independently use the TRAKTOR
KONTROL X1 as a MIDI Controller.
▪ Update: Download the latest software updates using the Service Center application.
Then browse to the download folder and install all downloaded updates.
▪ Suggestions for further reading, as well as tips for troubleshooting and FAQs, can be
found in the subsequent chapters of this guide.
TRAKTOR KONTROL X1 - Setup Guide - 7
Installing the TRAKTOR KONTROL X1 Software on Mac OS X
3 Installing the TRAKTOR KONTROL X1 Software on Mac
OS X
This chapter will guide you through the TRAKTOR KONTROL X1 installation procedure.
Before starting the TRAKTOR KONTROL X1 installation process, here are some points to
be aware of:
▪ Please carefully review the installer screens and the suggested installation paths in
order to avoid that any unwanted folders are created on your hard disk.
▪ Moving installation folders related to Native Instruments software after installation is
not recommended. Future software updates rely on the directory locations set during
initial installation.
Installing the TRAKTOR KONTROL X1 Software
TRAKTOR KONTROL X1 software installation includes installation of the Controller Editor,
the Service Center, the TRAKTOR PRO 2 software and the TRAKTOR KONTROL X1 driver.
For more information about the Controller Editor, refer to the Controller Editor manual that
will be copied to your computer’s hard disk as a PDF file during installation.
The following sections detail the installation of the TRAKTOR KONTROL X1ʼs software on
Windows and Mac OS X. There are two ways to install the TRAKTOR KONTROL X1 software:
▪ As part of TRAKTOR 2 (all versions) software installation
or
▪ TRAKTOR KONTROL X1 stand alone software installation
Do not connect the TRAKTOR KONTROL X1 hardware until the driver installation is complete!
You cannot install the TRAKTOR KONTROL X1 on a USB 1.1 port — a USB 2.0 port is required.
Please always refer to the Readme file on the installation DVD, as it contains last minute information that may not be available in this Setup Guide.
TRAKTOR KONTROL X1 - Setup Guide - 8
Installing the TRAKTOR KONTROL X1 Software on Mac OS X
Installing as Part of TRAKTOR
3.1 Installing as Part of TRAKTOR
The TRAKTOR KONTROL X1 driver, the Controller Editor and the Service Center application are installed during the TRAKTOR PRO 2 installation.
The following sections detail how to install the TRAKTOR KONTROL X1 driver and the
Controller Editor application as part of the TRAKTOR installation.
1. Place the installation DVD in your computer’s DVD-ROM drive. Its icon will appear in
the Mac OS X Finder.
2. Double-click the TRAKTOR DVD icon to display the content of the DVD.
3. Double-click the installer file named Traktor 2 Mac.mpkg.
4. Follow the on-screen instructions.
3.1.1 Select the Components to Install
► After you have accepted the software license agreement, click Continue to proceed.
TRAKTOR KONTROL X1 - Setup Guide - 9
Installing the TRAKTOR KONTROL X1 Software on Mac OS X
→ The installer window displays the components available for installation.
Installing as Part of TRAKTOR
It is recommended to keep all features selected unless you have a specific reason to deselect
a feature (such as if this feature is already installed on your computer).
Basic Installation: This installs the dedicated software for your TRAKTOR KONTROL X1
controller, along with its documentation. This component cannot be deselected. It also includes the installation of the Service Center (which is required for software activation) and
the Controller Editor (which allows you to configure the MIDI assignments of your TRAKTOR KONTROL X1 controller for use as a MIDI controller with applications other than the
included software).
Audio 2/4/8 DJ Drivers: This installs drivers for the AUDIO 2 DJ, AUDIO 4 DJ and AUDIO
8 DJ audio interfaces by Native Instruments. If you do not intend to use any of these audio
interfaces, you can deactivate the checkboxes.
TRAKTOR KONTROL X1 - Setup Guide - 10
Installing the TRAKTOR KONTROL X1 Software on Mac OS X
Installing as Part of TRAKTOR
Traktor Kontrol X1: This installs the driver for the TRAKTOR KONTROL X1 controller. This
checkbox has to be activated in order to use your X1 properly.
Traktor Kontrol S4: This installs the driver for the TRAKTOR KONTROL S4 controller. If you
do not intend to use this controller, you can deactivate this checkbox.
Traktor Audio 2/6/10: This installs drivers for the TRAKTOR AUDIO 2, TRAKTOR AUDIO 6
and TRAKTOR AUDIO 10 audio interfaces by Native Instruments. If you do not intend to
use any of these audio interfaces, you can deactivate the checkboxes.
It is strongly recommended to install the TRAKTOR KONTROL X1 software to the default location. If you still need to change the install location, click on the folder icon in the Location
column and select the desired folder.
3.1.2 Select the Location
► Click Install to install the software in the default path, or browse to select a custom in-
stallation path by clicking Change Install Location…. Then click Install.
TRAKTOR KONTROL X1 - Setup Guide - 11
Installing the TRAKTOR KONTROL X1 Software on Mac OS X
Installing as Part of TRAKTOR
3.1.3 Complete the Software Installation
► Once the installer is finished, you will be greeted with this screen. Click Restart to exit
the installer and restart your Mac. TRAKTOR PRO 2 and TRAKTOR KONTROL X1 software
installation is now complete.
3.2 Installing the TRAKTOR KONTROL X1 Driver Only
In case you have the TRAKTOR 2 software already installed on your computer, the following section provides information on how to install the TRAKTOR KONTROL X1 driver without the TRAKTOR PRO 2 software. Also included in the installer is the Controller Editor
application and the Service Center.
For more information about the Controller Editor, refer to the Controller Editor manual that
will be copied to your computerʼs hard disk as a PDF file during installation.
TRAKTOR KONTROL X1 - Setup Guide - 12
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
4 Installing the TRAKTOR KONTROL X1 Software on Windows
This chapter will guide you through the TRAKTOR KONTROL X1 installation procedure.
Before starting the TRAKTOR KONTROL X1 installation process, here are some points to
be aware of:
▪ Please carefully review the installer screens and the suggested installation paths in
order to avoid that any unwanted folders are created on your hard disk.
▪ Moving installation folders related to Native Instruments software after installation is
not recommended. Future software updates rely on the directory locations set during
initial installation.
Installing the TRAKTOR KONTROL X1 Software
TRAKTOR KONTROL X1 software installation includes installation of the Controller Editor,
the Service Center, the TRAKTOR PRO 2 software and the TRAKTOR KONTROL X1 driver.
For more information about the Controller Editor, refer to the Controller Editor manual that
will be copied to your computer’s hard disk as a PDF file during installation.
The following sections detail the installation of the TRAKTOR KONTROL X1ʼs software on
Windows and Mac OS X. There are two ways to install the TRAKTOR KONTROL X1 software:
▪ As part of TRAKTOR 2 (all versions) software installation
or
▪ TRAKTOR KONTROL X1 stand alone software installation
Do not connect the TRAKTOR KONTROL X1 hardware until the driver installation is complete!
You cannot install the TRAKTOR KONTROL X1 on a USB 1.1 port — a USB 2.0 port is required.
Please always refer to the Readme file on the installation DVD, as it contains last minute
information that may not be available in this Setup Guide.
4.1 Installing as Part of TRAKTOR
The TRAKTOR KONTROL X1 driver, the Controller Editor and the Service Center application are installed during the TRAKTOR PRO 2 installation.
TRAKTOR KONTROL X1 - Setup Guide - 13
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
The following sections detail how to install the TRAKTOR KONTROL X1 driver and the
Controller Editor application as part of the TRAKTOR installation.
1. Place the installation DVD in your computerʼs DVD-ROM drive.
2. Use the Windows Explorer to browse the content of the DVD.
3. Double-click the installer file named Traktor 2 PC.exe.
4.
Click Next to proceed.
TRAKTOR KONTROL X1 - Setup Guide - 14
Installing the TRAKTOR KONTROL X1 Software on Windows
5.
To continue, accept the terms of the software license agreement and click Next.
Installing as Part of TRAKTOR
TRAKTOR KONTROL X1 - Setup Guide - 15
Installing the TRAKTOR KONTROL X1 Software on Windows
4.1.1 Confirm the Features to Install
► Now choose the features you would like to install and click Next to proceed.
Installing as Part of TRAKTOR
Basic Installation: This installs the dedicated software for your TRAKTOR KONTROL X1
controller, along with its documentation. This component cannot be deselected. It also includes the installation of the Service Center (which is required for software activation) and
the Controller Editor (which allows you to configure the MIDI assignments of your TRAKTOR KONTROL X1 controller for use as a MIDI controller with applications other than the
included software).
4.1.2
Confirm the Application Installation Path
You will be asked to select and confirm an installation path for the TRAKTOR 2 software.
It is strongly recommended to install the TRAKTOR KONTROL X1 software to the default location. If you still need to change the install location, click Change… to open a Folder Selection dialog and select the desired destination folder.
TRAKTOR KONTROL X1 - Setup Guide - 16
► Click Next to proceed.
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
TRAKTOR KONTROL X1 - Setup Guide - 17
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
4.1.3 Choose the Hardware Driver
1. Choose here which Native Instruments audio interface drivers you would like to install. Check the appropriate checkboxes for your hardware, then click Next to proceed.
TRAKTOR KONTROL X1 - Setup Guide - 18
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
2. If you intend to use one of the following Native Instruments audio interfaces, check
the appropriate checkboxes, then click Next to proceed.
TRAKTOR KONTROL X1 - Setup Guide - 19
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
3. Check the TRAKTOR KONTROL X1 checkbox to install the TRAKTOR KONTROL X1
driver as part of the TRAKTOR installation, then click Next to proceed.
4. Follow the on-screen instructions.
TRAKTOR KONTROL X1 - Setup Guide - 20
4.1.4 Complete the Software Installation
► Click Finish to complete the software installation.
Installing the TRAKTOR KONTROL X1 Software on Windows
Installing as Part of TRAKTOR
► Please activate your TRAKTOR PRO 2 software using Service Center now.
For more information about the activation procedure, please refer to the TRAKTOR 2 Setup
Guide that will be copied to your computerʼs hard disk as a PDF file during installation.
4.2 Installing the TRAKTOR KONTROL X1 Driver Only
In case you have the TRAKTOR 2 software already installed on your computer, the following section provides information on how to install the TRAKTOR KONTROL X1 driver without the TRAKTOR PRO 2 software. Also included in the installer is the Controller Editor
application and the Service Center.
For more information about the Controller Editor, refer to the Controller Editor manual that
will be copied to your computerʼs hard disk as a PDF file during installation.
TRAKTOR KONTROL X1 - Setup Guide - 21
Installing the TRAKTOR KONTROL X1 Software on Windows
Connecting the TRAKTOR KONTROL X1 Hardware
4.3 Connecting the TRAKTOR KONTROL X1 Hardware
Once software installation is complete, connect the TRAKTOR KONTROL X1 via the supplied USB cable to an available USB 2.0 (or later) port on your computer.
Do not connect the TRAKTOR KONTROL X1 hardware until the driver installation is complete.
4.3.1 Connecting the TRAKTOR KONTROL X1 on Mac OS X
Once the TRAKTOR KONTROL X1 software installation is complete and the TRAKTOR
KONTROL X1 is connected to a USB 2.0 (or later) port on your computer, no further steps
are necessary.
You cannot install the TRAKTOR KONTROL X1 on a USB 1.1 port — a USB 2.0 port is required.
USB hubs may also be used, however Native Instruments cannot guarantee compatibility
with all USB hubs currently available on the market.
4.3.2 Connecting the TRAKTOR KONTROL X1 on Windows
When connecting the TRAKTOR KONTROL X1 to a USB 2.0 port on your computer for the
first time, Windows will identify the TRAKTOR KONTROL X1 and start the final installation process.
You cannot install the TRAKTOR KONTROL X1 on a USB 1.1 port — a USB 2.0 port is required.
USB hubs may also be used, however Native Instruments cannot guarantee compatibility
with all USB hubs currently available on the market.
4.4 Ready to KONTROL
► The TRAKTOR KONTROL X1 was designed as a ‘plug and play’ device. Once the supporting software is installed no other configuration is necessary. Open TRAKTOR and you
are ready to mix!
TRAKTOR KONTROL X1 - Setup Guide - 22
Installing the TRAKTOR KONTROL X1 Software on Windows
‘Plug and play’ functionality is available only for TRAKTOR version 1.2.3 and later. Sample
Deck control is available only for TRAKTOR version 2.0.3 and later. For more information,
please refer to the TRAKTOR KONTROL X1 Reference Manual.
Ready to KONTROL
TRAKTOR KONTROL X1 - Setup Guide - 23
Loading...