Quick Start
Thank you for purchasing the MSI® MAG X570 TOMAHAWK WIFI motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.
Kurzanleitung
Danke, dass Sie das MSI® MAG X570 TOMAHAWK WIFI Motherboard gewählt haben. Dieser Abschnitt der Kurzanleitung bietet eine Demo zur Installation Ihres Computers. Manche Installationen bieten auch die Videodemonstrationen. Klicken Sie auf die URL, um diese Videoanleitung mit Ihrem Browser auf Ihrem Handy oder Table anzusehen. Oder scannen Sie auch den QR Code mit Ihrem Handy, um die URL zu öffnen.
Présentation rapide
Merci d’avoir choisi la carte mère MSI® MAG X570 TOMAHAWK WIFI. Ce manuel fournit une rapide présentation avec des illustrations explicatives qui vous aideront à assembler votre ordinateur. Des tutoriels vidéo sont disponibles pour certaines étapes. Cliquez sur le lien fourni pour regarder la vidéo sur votre téléphone ou votre tablette. Vous pouvez également accéder au lien en scannant le QR code qui lui est associé.
Быстрыйстарт
Благодарим вас за покупку материнской платы MSI® MAG X570 TOMAHAWK WIFI. В этом разделе представлена информация, которая поможет вам при сборке комьютера. Для некоторых этапов сборки имеются видеоинструкции. Для просмотра видео, необходимо открыть соответствующую ссылку в веб-браузере на вашем телефоне или планшете. Вы также можете выполнить переход по ссылке, путем сканирования QR-кода.
Quick Start I
Installing a Processor/ Installation des Prozessors/ Installer un processeur/Установкапроцессора
https://youtu.be/Xv89nhFk1vc |
1 |
3
2
5 4
6 |
8 |
|
9 |
||
|
7 CPU_FAN1
II Quick Start
Important
If you are installing the screw-type CPU heatsink, please follow the figure below to remove the retention module first and then install the heatsink.
Wenn Sie einen CPU-Kühler mit Schraubenbefestigung einsetzen, folgen Sie bitte den Anweisungen unten um das Retention-Modul zu entfernen und den Kühler zu installieren.
Si vous voulez installer un ventirad pour processeur à vis, veuillez suivre les instructions ci-dessous pour d’abord retirer le module de rétention puis installer le ventirad.
В случае установки процессорного кулера с системой крепления на винтах, следуйте указаниям на рисунке ниже для снятия пластикового модуля крепления. Затем установите кулер.
1
2 |
3 |
Quick Start III
Installing DDR4 memory/ Installation des DDR4-Speichers/
InstallerunemémoireDDR4/УстановкапамятиDDR4
http://youtu.be/T03aDrJPyQs
DIMMA2 |
DIMMA2 |
DIMMA1 |
DIMMA2 |
||
|
DIMMB2 |
DIMMB1 |
|
|
DIMMB2 |
IV Quick Start
Connecting the Front Panel Header/ Anschließen der Frontpanel-Stiftleiste/ Connecter un connecteur du panneau avant/Подключениеразъемовпереднейпанели
http://youtu.be/DPELIdVNZUI
|
|
|
|
|
- |
|
|
|
|
|
|
|
|
|
LED |
|
|
||
|
|
|
|
LED+ |
|
POWER |
|
||
|
|
|
|
POWER |
|
|
|||
|
|
|
LED |
|
|
|
|||
|
|
SW |
HDD |
|
|
|
|||
|
|
|
|
|
|
|
|
||
|
|
POWER |
|
|
|
|
|
|
|
|
|
SW |
|
|
|
|
|
|
|
|
|
RESET |
|
|
|
|
|
|
|
|
Power LED |
|
Power Switch |
||||||
|
|
+ - + - |
10 |
||||||
|
JFP1 |
2 |
|
|
|
|
|
||
|
1 |
|
|
|
|
|
9 |
Reserved |
|
|
|
+ - - + |
|
||||||
|
|
HDD LED |
|
Reset Switch |
|||||
1 |
HDD LED + |
|
|
2 |
|
|
Power LED + |
||
3 |
HDD LED - |
|
|
4 |
|
|
Power LED - |
||
5 |
Reset Switch |
|
|
6 |
|
|
Power Switch |
||
7 |
Reset Switch |
|
|
8 |
|
|
Power Switch |
||
9 |
Reserved |
|
|
10 |
|
|
No Pin |
HDD LED
POWER LED
RESETSW
HDDLED
JFP1
HDD LED -
HDD LED +
POWER LED - POWER LED +
Quick Start V
Installing the Motherboard/ Installation des Motherboards/
Installerlacartemère/Установкаматеринскойплаты
1
Torque: |
|
3 kgf·cm* |
2 |
|
BAT1
*3 kgf·cm = 0.3 N·m = 2.6 lbf·in
VI Quick Start
Connecting the Power Connectors/ Stromanschlüsse anschliessen/ Connecter les câbles du module d’alimentation/
Подключениеразъемовпитания
http://youtu.be/gkDYyR_83I4
ATX_PWR1
CPU_PWR1
CPU_PWR2
Quick Start VII
Installing SATA Drives/ Installation der SATA-Laufwerke/
InstallerledisquedurSATA/УстановкадисковSATA
http://youtu.be/RZsMpqxythc |
1 |
2 |
3 |
|
5
4
VIII Quick Start
Installing a Graphics Card/ Einbau der Grafikkarte/ Installer unecartegraphique/Установкадискретнойвидеокарты
http://youtu.be/mG0GZpr9w_A
1
3 |
2 |
5
4
6
Quick Start IX
Connecting Peripheral Devices/ Peripheriegeräte/ Connecter unpériphériqueanschliessen/Подключениепериферийных устройств
Processor with integrated graphics
X Quick Start
PowerOn/Einschalten/Mettresous-tension/Включение питания
1 2
3
4
Quick Start XI
NOTE
XII Quick Start
Contents |
|
Safety Information................................................................................................. |
2 |
Specifications......................................................................................................... |
3 |
Package contents .................................................................................................. |
9 |
Rear I/O Panel...................................................................................................... |
10 |
LAN Port LED Status Table................................................................................... |
10 |
Audio Ports Configuration..................................................................................... |
10 |
Realtek Audio Console.......................................................................................... |
11 |
Overview of Components..................................................................................... |
14 |
CPU Socket............................................................................................................ |
15 |
DIMM Slots............................................................................................................ |
16 |
PCI_E1~4: PCIe Expansion Slots.......................................................................... |
17 |
M2_1~2: M.2 Slots (Key M).................................................................................... |
18 |
SATA1~6: SATA 6Gb/s Connectors....................................................................... |
20 |
JFP1, JFP2: Front Panel Connectors................................................................... |
20 |
CPU_PWR1~2, ATX_PWR1: Power Connectors.................................................... |
21 |
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors.................................. |
22 |
JUSB1~2: USB 2.0 Connectors............................................................................. |
23 |
JUSB3~4: USB 3.2 Gen 1 5Gbps Connectors........................................................ |
23 |
JUSB5: USB 3.2 Gen 2 10Gbps Type-C Connector............................................... |
24 |
JAUD1: Front Audio Connector............................................................................. |
24 |
JCI1: Chassis Intrusion Connector....................................................................... |
25 |
JCOM1: Serial Port Connector.............................................................................. |
25 |
JBAT1: Clear CMOS (Reset BIOS) Jumper........................................................... |
26 |
EZ Debug LED....................................................................................................... |
26 |
JRGB1~2: RGB LED connectors............................................................................ |
27 |
JRAINBOW1~2: Addressable RGB LED connectors............................................. |
28 |
Installing OS, Drivers & Utilities.......................................................................... |
29 |
Installing Windows® 10.......................................................................................... |
29 |
Installing Drivers................................................................................................... |
29 |
Installing Utilities.................................................................................................. |
29 |
BIOS Setup............................................................................................................ |
30 |
Entering BIOS Setup............................................................................................. |
30 |
Resetting BIOS...................................................................................................... |
31 |
Updating BIOS....................................................................................................... |
31 |
EZ Mode................................................................................................................. |
33 |
Advanced Mode .................................................................................................... |
35 |
OC Menu................................................................................................................ |
36 |
Contents 1
∙∙The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.
∙∙Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
∙∙Hold the motherboard by the edges to avoid touching sensitive components. ∙∙It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.
∙∙Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.
∙∙Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
∙∙Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.
∙∙If you need help during any installation step, please consult a certified computer technician.
∙∙Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
∙∙Keep this user guide for future reference. ∙∙Keep this motherboard away from humidity.
∙∙Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
∙∙Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
∙∙All cautions and warnings on the motherboard should be noted.
∙∙If any of the following situations arises, get the motherboard checked by service personnel:
▪▪Liquid has penetrated into the computer.
▪▪The motherboard has been exposed to moisture.
▪▪The motherboard does not work well or you can not get it work according to user guide.
▪▪The motherboard has been dropped and damaged. ▪▪The motherboard has obvious sign of breakage.
∙∙Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.
2 Safety Information
|
|
CPU |
Supports 2nd and 3rd Gen AMD Ryzen™ / Ryzen™ with |
Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with |
|
|
Radeon™ Graphics Desktop Processors for Socket AM4 |
Chipset |
AMD® X570 Chipset |
|
∙∙4x DDR4 memory slots, support up to 128GB* |
|
▪▪3rd Gen AMD Ryzen™ Processors support DDR4 1866/ |
|
2133/ 2400/ 2667/ 2800/ 2933/ 3000/ 3066/ 3200 Mhz by |
|
JEDEC, and 2667/ 2800/ 2933/ 3000/ 3066/ 3200/ 3466/ |
|
3600/ 3733/ 3866/ 4000/ 4133/ 4266/ 4400/ 4533/ 4600+ |
|
Mhz by A-XMP OC MODE |
|
▪▪2nd Gen AMD Ryzen™ Processors, 1st and 2nd Gen |
|
AMD Ryzen™ with Radeon™ Vega Graphics Processors |
|
support DDR4 1866/ 2133/ 2400/ 2667/ 2800/ 2933/ 3000/ |
|
3066/ 3200 Mhz by JEDEC, and 2667/ 2800/ 2933/ 3000/ |
Memory |
3066/ 3200/ 3466+ Mhz by A-XMP OC MODE |
∙∙Supports 1DPC 1R max speed 4600 MHZ |
|
|
∙∙Supports 1DPC 2R max speed 3866 MHZ |
|
∙∙Supports 2DPC 1R max speed 4000 MHZ |
|
∙∙Supports 2DPC 2R max speed 3600 MHZ |
|
∙∙Dual channel memory architecture |
|
∙∙Supports non-ECC UDIMM memory |
|
∙∙Supports ECC UDIMM memory (non-ECC mode) |
|
∙∙Supports un-buffered memory |
|
* Please refer www.msi.com for more information on compatible memory. |
|
∙∙1x PCIe 4.0/ 3.0 x16 slot (PCI_E1) |
|
▪▪3rd Gen AMD Ryzen™ support PCIe 4.0 x16 mode |
|
▪▪2nd Gen AMD Ryzen™ support PCIe 3.0 x16 mode |
Expansion Slot |
▪▪Ryzen™ with Radeon™ Vega Graphics and 2nd Gen |
AMD Ryzen™ with Radeon™ Graphics support PCIe 3.0 |
|
|
x8 mode |
|
∙∙1x PCIe 4.0/ 3.0 x16 slot (PCI_E3, supports x4 mode) |
|
∙∙2x PCIe 3.0 x1 slots |
|
* The speeds may vary for different devices |
|
∙∙1x HDMI 1.4 port, supports a maximum resolution of |
Onboard Graphics |
4096x2160 @24Hz* |
* Only support when using Ryzen™ with Radeon™ Vega Graphics and 2nd Gen |
|
|
AMD Ryzen™ with Radeon™ Graphics Processors |
|
* Maximum shared memory of 2048 MB |
|
Continued on next page |
Specifications 3
|
Continued from previous page |
Multi-GPU |
∙∙Supports 2-Way AMD® CrossFire™ Technology |
LAN |
∙∙1x Realtek® 8125B 2.5Gbps LAN Controller |
|
Intel® Wi-Fi 6 AX200 |
Wireless LAN & |
▪▪Supports 802.11 a/b/g/n/ac/ax, MU-MINO Rx, 2.4GHz- |
5GHz (160MHz) up to 2.4Gbps |
|
Bluetooth® |
▪▪Supports Bluetooth® 5 |
|
▪▪The Wireless module is pre-install in the M2_WIFI1 |
|
(Key-E) slot |
|
∙∙6x SATA 6Gb/s ports (from AMD® X570 Chipset) |
|
∙∙2x M.2 slots (Key M)* |
|
▪▪M2_1 slot (from AMD® Processor) |
|
▫▫Supports PCIe 4.0 x4 (3rd Gen AMD Ryzen™) |
|
▫▫Supports PCIe 3.0 x4 (2nd Gen AMD Ryzen™/ |
|
Ryzen™ with Radeon™ Vega Graphics and 2nd Gen |
Storage |
AMD Ryzen™ with Radeon™ Graphics) |
▫▫Supports 2242/ 2260/ 2280/ 22110 storage devices |
|
|
▪▪M2_2 slot (from AMD® X570 Chipset) |
|
▫▫Supports PCIe 4.0 x4 (3rd Gen AMD Ryzen™) |
|
▫▫Supports PCIe 3.0 x4 (2nd Gen AMD Ryzen™/ |
|
Ryzen™ with Radeon™ Vega Graphics and 2nd Gen |
|
AMD Ryzen™ with Radeon™ Graphics) |
|
▫▫Supports SATA 6Gb/s |
|
▫▫Supports 2242/ 2260/ 2280 storage devices |
RAID |
∙∙Supports RAID 0, RAID 1 and RAID 10 |
Audio |
Realtek® ALC1200 Codec |
∙∙7.1-Channel High Definition Audio |
|
|
∙∙Supports Optical S/PDIF output |
I/O Controller |
NUVOTON NCT6797 Controller Chip |
Hardware Monitor |
∙∙CPU/ System/ Chipset temperature detection |
∙∙CPU/ System/ Chipset fan speed detection |
|
|
∙∙CPU/ System/ Chipset fan speed control |
|
Continued on next page |
4 Specifications
Continued from previous page
|
∙∙AMD® X570 Chipset |
|
▪▪3x USB 3.2 Gen 2 10Gbps ports (2 Type-A ports on the |
|
back panel, 1 Type-C internal connector) |
|
▪▪4x USB 3.2 Gen 1 5Gbps ports available through the |
|
internal USB 3.2 Gen 1 5Gbps connectors |
|
▪▪6x USB 2.0 ports (2 Type-A ports on the back panel, 4 |
USB |
ports available through the internal USB 2.0 connectors) |
∙∙AMD® Processor |
|
|
▪▪2x USB 3.2 Gen 2 10Gbps (3rd Gen AMD Ryzen™) or |
|
USB 3.2 Gen 1 5Gbps (2nd Gen AMD Ryzen™/ Ryzen™ |
|
with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ |
|
with Radeon™ Graphics) ports (1x Type-A & 1x Type-C) |
|
on the back panel |
|
▪▪2x USB 3.2 Gen 1 5Gbps Type-A ports on the back |
|
panel |
|
∙∙1x Flash BIOS Button |
|
∙∙1x PS/2 keyboard/ mouse combo port |
|
∙∙2x USB 2.0 ports |
|
∙∙2x WiFi/ Bluetooth antenna jacks |
Back Panel |
∙∙2x USB 3.2 Gen 1 5Gbps ports |
∙∙1x HDMI port |
|
Connectors |
∙∙1x USB 3.2 Gen 2 10Gbps/ Gen 1 5Gbps Type A port |
|
∙∙1x USB 3.2 Gen 2 10Gbps/ Gen 1 5Gbps Type C port |
|
∙∙1x LAN(RJ45) port |
|
∙∙2x USB 3.2 Gen 2 10Gbps Type A ports |
|
∙∙5x audio jacks |
|
∙∙1x Optical S/PDIF Out connector |
|
Continued on next page |
Specifications 5
Continued from previous page
∙∙1x 24-pin ATX main power connector ∙∙1x 8-pin ATX 12V power connector ∙∙1x 4-pin ATX 12V power connector ∙∙6x SATA 6Gb/s connectors
∙∙2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
∙∙2x USB 3.2 Gen 1 5Gbps connectors (supports additional 4 USB 3.2 Gen 1 5Gbps ports)
∙∙1x USB 3.2 Gen 2 10Gbps Type-C Port ∙∙1x 4-pin CPU fan connector
Internal Connectors ∙∙1x 4-pin water-pump connector ∙∙4x 4-pin system fan connectors ∙∙1x Front panel audio connector ∙∙2x System panel connectors
∙∙1x TPM module connector ∙∙1x Serial port connector ∙∙1x Clear CMOS jumper
∙∙1x Chassis Intrusion connector ∙∙2x 4-pin RGB LED connectors
∙∙2x 3-pin RAINBOW LED connectors ∙∙4x EZ Debug LEDs
|
|
|
∙∙1x 256 Mb flash |
BIOS Features |
∙∙UEFI AMI BIOS |
∙∙ACPI 6.1, SM BIOS 2.8 |
|
|
∙∙Multi-language |
Form Factor |
∙∙ATX Form Factor |
|
∙∙12 in. x 9.6 in. (30.5 cm x 24.4 cm) |
|
Continued on next page |
6 Specifications
|
Continued from previous page |
|
|
∙∙Drivers |
|
|
∙∙DRAGON CENTER |
|
Software |
∙∙CPU-Z MSI GAMING |
|
∙∙Open Broadcaster Software (OBS) |
||
|
∙∙MSI App Player (BlueStacks) |
|
|
∙∙Google Chrome™ ,Google Toolbar, Google Drive |
|
|
∙∙Norton™ Internet Security Solution |
|
|
∙∙Gaming Mode |
|
|
∙∙Gaming Hotkey |
|
|
∙∙LAN Manager |
|
|
∙∙Mystic Light |
|
|
∙∙Ambient Link |
|
Dragon Center |
∙∙User Scenario |
|
∙∙Monitor(Hardware |
|
|
Features |
|
|
|
Monitor) |
Please refer to http://download.msi. |
|
∙∙True Color |
com/manual/mb/DRAGONCENTER2. |
|
∙∙Live Update |
pdf for more details. |
|
∙∙Speed Up |
|
|
∙∙Smart Tool |
|
|
∙∙Super Charger |
|
|
∙∙Audio |
|
|
▪▪Audio Boost |
|
|
∙∙Network |
|
|
▪▪2.5G LAN |
|
|
▪▪Intel WiFi 6 |
|
Special Features |
∙∙Cooling |
|
▪▪Frozr Heatsink Design |
|
|
|
▪▪Propeller Blade technology |
|
|
▪▪M.2 Shield Frozr |
|
|
▪▪Extended Heatsink Design |
|
|
▪▪Pump Fan |
|
|
▪▪Smart Fan Control |
|
|
Continued on next page |
|
Specifications 7
Continued from previous page
∙∙Storage
▪▪Lightning Gen 4 M.2
▪▪Twin Turbo M.2
∙∙LED
▪▪Mystic Light 3
▪▪Mystic Light Extension (RGB)
▪▪Mystic Light Extension (RAINBOW)
▪▪Mystic Light Sync
▪▪EZ DEBUG LED ∙∙Protection
▪▪PCIe Steel Armor ▪▪PCIe Steel Slot ▪▪Pre-installed IO shielding
∙∙Performance
▪▪Lightning Gen 4 PCI-E Slot
▪▪Multi GPU-CrossFire Technology
Special Features ▪▪DDR4 Boost
▪▪Core Boost
▪▪GAME Boost ▪▪USB with type A+C
▪▪AMD Turbo USB 3.2 Gen 2
▪▪Dual CPU Power
∙∙BIOS
▪▪Click BIOS 5
▪▪Flash BIOS Button
∙∙Gamer Experience ▪▪DRAGON CENTER ▪▪GAMING HOTKEY ▪▪GAMING MOUSE Control ▪▪USB SPEED UP
▪▪Total Fan control ▪▪Live Update ▪▪APP Player
8 Specifications
Please check the contents of your motherboard package. It should contain:
|
|
|
|
Motherboard |
MAG X570 TOMAHAWK WIFI |
|
|
Cable |
SATA 6Gb/s cables (2 cables/pack) |
1 |
|
|
Wi-Fi antenna |
1 |
|
Accessories |
M.2 screws (3 pcs./pack) |
1 |
|
Case badge |
1 |
||
|
Product registration card |
1 |
|
Application DVD |
Driver DVD |
1 |
|
Documentation |
User manual |
1 |
|
Quick installation guide |
1 |
||
|
Important
If any of the above items are damaged or missing, please contact your retailer.0
Package contents 9
Wi-Fi Antenna |
USB 3.2 Gen 2 |
|
|
|
|
|
|
||
connectors |
10Gbps Type-A* |
|
|
Audio |
|
Ports |
|
||
PS/2 |
|
|
USB 3.2 Gen 1 |
2.5Gbps |
|
|
|||
|
|
|
|
||||||
|
|
5Gbps Type-A |
LAN |
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|||
|
|
|
|
|
Flash BIOS |
Button |
Flash BIOS |
USB 3.2 Gen 2 |
|
Port |
10Gbps Type-A |
|
USB 2.0 Type-A |
USB 3.2 Gen 2 |
Optical S/PDIF-Out |
|
10Gbps Type-C* |
|
*USB 3.2 Gen 2 10Gbps (3rd Gen AMD Ryzen™) or USB 3.2 Gen 1 5Gbps (2nd Gen AMD Ryzen™/Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™Graphics)
∙∙Flash BIOS Port/ Button - Please refer to page 32 for Updating BIOS with Flash BIOS Button.
Link/ Activity LED
Status |
Description |
Off |
No link |
Yellow |
Linked |
Blinking |
Data activity |
Speed LED
Status |
Description |
Off |
10 Mbps connection |
Green |
100 Mbps/ 1 Gbps |
Orange |
2.5 Gbps connection |
Audio Ports |
|
Channel |
|
||
2 |
4 |
6 |
8 |
||
|
|||||
Center/ Subwoofer Out |
|
|
● |
● |
|
Rear Speaker Out |
|
● |
● |
● |
|
Line-In/ Side Speaker Out |
|
|
|
● |
|
Line-Out/ Front Speaker Out ● |
● |
● |
● |
||
Mic In |
|
|
|
|
|
(●: connected, Blank: empty) |
|
|
|
10 Rear I/O Panel
After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience.
Application Enhancement
Device
Selection
Main Volume
Connector Settings |
Jack |
|
Status |
|
∙∙Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
∙∙Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
∙∙Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.
∙∙Jack Status - depicts all render and capture devices currently connected with your computer.
∙∙Connector Settings - configures the connection settings.
Auto popup dialog
When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.
Each jack corresponds to its default setting as shown on the next page.
Important
The pictures above for reference only and may vary from the product you purchased.
Rear I/O Panel 11
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
AUDIO INPUT
Audio jacks to 7.1-channel speakers diagram
AUDIO INPUT
Rear |
Front |
Side |
Center/ |
|
Subwoofer |
12 Rear I/O Panel
Installing antennas
1. Screw the antennas tight to the antenna connectors as shown below. 2. Orient the antennas.
1
2
Rear I/O Panel 13
PCI_E1
JCI1 PCI_E2
PCI_E3 JBAT1
PCI_E4 JAUD1
CPU_PWR2 CPU_PWR1
Processor
Socket CPU_FAN1
JRGB2JRAINBOW2
PUMP_FAN1
DIMMB2
DIMMB1
DIMMA2
DIMMA1
|
|
ATX_PWR1 |
|
|
JUSB5 |
|
|
M2_1 |
|
|
SATA▼5▲6 |
|
|
SATA▼3▲4 |
BAT1 |
|
SATA▼1▲2 |
|
|
M2_2 |
|
|
JUSB4 |
|
|
JFP2 |
|
|
JRAINBOW1 |
JRGB1 |
|
JFP1 |
|
|
|
JTPM1 |
|
JUSB2 JUSB3 |
SYS_FAN1 |
JUSB1 |
|
SYS_FAN2 |
|
|
SYS_FAN3 |
JCOM1 |
|
SYS_FAN4
14 Overview of Components
Distance from the center of the
CPU to the nearest DIMM slot.
53.2 mm
Introduction to the AM4 CPU
The surface of the AM4 CPU has a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator.
Important
∙∙When changing the processor, the system configuration could be cleared and reset BIOS to default values, due to the AM4 processor’s architecture.
∙∙Always unplug the power cord from the power outlet before installing or removing the CPU.
∙∙When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.
∙∙Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
∙∙Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
∙∙If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation. ∙∙This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.
Overview of Components 15
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIMMA1 |
|
|
|
|
|
|
|
DIMMB1 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Channel A |
|
|
|
|
|
|
|
|
|
|
|
Channel B |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIMMA2 |
|
|
|
|
|
|
|
|
|
DIMMB2 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Memory module installation recommendation
|
|
|
DIMMA1 |
|
DIMMA2 |
DIMMA2 |
DIMMA2 |
|
DIMMB1 |
||
∙∙ |
|
DIMMB2 |
DIMMB2 |
|
|
Important
Always insert memory modules in the DIMMA2 slot first.
∙∙To ensure system stability for Dual channel mode, memory modules must be of the same type, number and density.
∙∙Some memory may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
∙∙It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
∙∙The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.
∙∙Please refer www.msi.com for more information on compatible memory.
16 Overview of Components
BAT1
PCI_E1: PCIe x16 slot (CPU)
PCI_E2: PCIe x1 slot (PCH) PCI_E3: PCIe x16 slot (PCH)
PCI_E4: PCIe x1 slot (PCH)
|
|
|
|
|
3rd Gen AMD |
2nd Gen AMD |
Ryzen™ with Radeon™ |
Slots |
Vega Graphics and 2nd |
||
Ryzen™ |
Ryzen™ |
Gen AMD Ryzen™ with |
|
|
|
|
Radeon™ Graphics |
PCI_E1 (CPU) |
PCIe 4.0 x16 |
PCIe 3.0 x16 |
PCIe 3.0 x8 |
PCI_E2 (PCH) |
PCIe 3.0 x1 |
PCIe 3.0 x1 |
PCIe 3.0 x1 |
PCI_E3 (PCH) |
PCIe 4.0 x4 |
PCIe 3.0 x4 |
PCIe 3.0 x4 |
PCI_E4 (PCH) |
PCIe 3.0 x1 |
PCIe 3.0 x1 |
PCIe 3.0 x1 |
Important
∙∙If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.
∙∙For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.
∙∙When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.
Overview of Components 17
M2_1
M2_2
The following table describes the relationship between the M.2 slots and the PCIe bandwidth of the processors.
|
|
|
|
|
|
|
Ryzen™ with |
Slots |
3rd Gen AMD |
2nd Gen AMD |
Radeon™ Vega |
Graphics and 2nd Gen |
|||
|
Ryzen™ |
Ryzen™ |
AMD Ryzen™ with |
|
|
|
Radeon™ Graphics |
M2_1 |
PCIe 4.0 x4 |
PCIe 3.0 x4 |
PCIe 3.0 x4 |
(CPU) |
|||
M2_2 |
PCIe 4.0 x4 |
PCIe 3.0 x4 |
PCIe 3.0 x4 |
(PCH) |
M.2 installation
1.Loosen the screws of M.2 heatsink.
2.Remove the M.2 hearsink and remove the protective film from the thermal pad.
2 1
1 |
1 |
|
1 |
||
|
18 Overview of Components