Product and Cut-out Dimensions
Warming Drawer
ESW 4802 FB Custom Panel and Handle
Page 1 of 4
O E
Location Codes
E – The drawer comes equipped with a 5 ft. (1.5 m) power cord with a three-prong grounding plug ready for connection to a 120V, 15 A, 60 Hz power supply.
O – 1” ² minimum hole size for plug. Outlet to be installed in adjacent cabinetry
Notes
Panel must consist of heat resistant material 140 ° F (60° C). Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer.
All installations must be done in accordance with local codes.
Dependant upon panel thickness
Note: Drawing is not to scale Specification Sheets OJS 11142011
Product and Cut-out Dimensions
Warming Drawer
ESW 4802 FB Custom Panel and Handle
Page 2 of 4
This unit is designed to accept a custom door panel supplied by the cabinet maker. Panel size as follows:
Width: |
29 |
13/16” (757 mm) |
Height: |
10 |
5/8” (270 mm) |
Thickness: Minimum of 3/8” (10 mm)
Maximum panel weight: 11 Pounds (5 kg)
Location Codes
E – The drawer comes equipped with a 5 ft. (1.5 m) power cord with a three-prong grounding plug ready for connection to a 120V, 15 A, 60 Hz power supply.
O – 1” ² minimum hole size for plug. Outlet to be installed in adjacent cabinetry
Notes
Panel must consist of heat resistant material 140 ° F (60° C). Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer.
All installations must be done in accordance with local codes.
Note: Drawing is not to scale Specification Sheets OJS 11142011