LG GL-C432HQCN, GL-B432BS, GL-F682HQHN, GL-M432BS, GL-F681HLHN Owner’s Manual

<![if ! IE]>

<![endif]>ARABIC FRENCH ENGLISH

P/NO : MFL67477509

Copyright © 2018 LG Electronics. All rights reserved

IMPORTANT SAFETY INFORMATION	............3
INSTALLATION...............................................	10
INNER PARTS ................................................	11
OPERATIONS.................................................	13

G*-*4**/ G*-*5**

Starting
Before Setting The Temperature
Door Alarm
Self Test
Controls For Freezer Compartment
Controls For Refrigerator Compartment
Express Freeze
Child Lock (Optional)
Wi-Fi
Green Ion Door Cooling
Vegetable Drawer
Defrosting
Deodorizer (Optional)
Ice Making
Hygiene Fresh (Optional)
Water Dispenser (Optional)
Smart Diagnosis (Optional)
Lamp Replacement
SUGGESTIONS ON FOOD STORAGE .........	23
CLEANING .....................................................	24
GENERAL INFORMATION .............................	25
IMPORTANT WARNINGS ..............................	26
BEFORE CALLING FOR SERVICE ...............	27

2

WARNING

Keep ventilation openings, in the appliance enclosure or in the built-in-structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartment, unless they are recommended by the manufacturer.

The refrigerant and insulation blowing gas used in the appliance requires special disposal procedures. When disposal, please consult with services agent or a similarly qualified person.

3

If gas used is R600a

This appliance contains a small amount of isobutane refrigerant (R600a), natural gas with high environmental compatibility, but it is also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.

Never startup an appliance showing any signs of damage. If in doubt, consult your dealer.

All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

The correct disposal of your old appliance will help prevent potential negative consensus for the environment and human health.

For more detailed information about the disposal of your old appliances, please contact your city office, waste disposal service or the shop where you purchased the product.

(*NOTE - 1,2,3 are applicable for Jordan Regulations and other countries as per applicability)

4

Do not use or store inflammable materials like ether, benzene, alcohol, medicine, LP gas, spray or cosmetics near or in the refrigerator.

It may cause explosion or fire.

5

Install in places away from the fire such as the place

where flammable gas is leaked.

It may cause fire.

6

like gasket

7

Do not place glass containers, bottles or cans (especially those containing carbonated drinks) in the freezer compartment, shelves or ice bin that will be exposed to temperatures below freezing.

Completely empty inside before taking out the container from the door.

8

Please do not use a dishwasher to clean the lower drawers; the high temperature may cause damage to the baskets which make them unusable.

If the appliance is equipped with a lock (some countries only), keep the key out of reach of children.

This appliance is intended to be used in household and similar applications such as

-staff kitchen areas in shops, offices and other working environments;

-farm houses and by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments;

-catering and similar non-retail applications.

9

Dimensions and Clearances

Too small of a distance from adjacent items may result in degradation of freezing capability and increased electricity costs. Allow over 50mm clearance from each adjacent wall when installing the appliance.

5.After installing the appliance, connect the power plug into a socket outlet. Before moving and discarding the appliance, disconnect the plug from the socket outlet.

Inverter-On feature (Optional)

Image for representation purpose only

-	G*-*5**	G*-*4**
A	700	700
B	1740	1640
C	572	572
D	15	15
E	660	660
F	700	700
G	1035	1035
H	1200	1200

Ambient Temperature

The appliance is designed to operate within a limited range of ambient temperatures, depending on the climate zone. do not use the appliance at a temperature exceeding the limit.

The internal temperatures could be affected by the location of the appliance, the ambient temperature, the frequency of door opening and so on.

The climate class can be found on the rating label.

Climate Class	Ambient Temperture Range 0C
SN (Extended Temperate)	+10	- +32
N (Temperate)	+16	- +32
ST (Subtropical)	+16	- +38
T (Tropical)	+16	- +43/+10 - +43*

*Australia, India, Kenya

NOTE

The appliances rated from SN to T are intended to be used at an ambient temperature between

100C and 430C

Minimum requirement: UPS/ Inverter should be in ON condition having minimum 600VA capacity along with minimum 120Ah capacity battery connected with the refrigerator’s power supply socket.

10

Water Dispenser Model

FREEZER

COMPARTMENT

Lamp

Shelf

Twisting Ice Serve

Type Ice Making

REFRIGERATOR

COMPARTMENT

Lamp

Deodorizer (Optional)

Fresh Room Drawer

/Pull Out Tray (Optional)

Shelves

Hygiene Fresh

(Optional)

Vegetable Drawer

Freezer Temperature

Control Dial

Smart Diagnosis

Freezer Door Rack

Water Tank

Refrigerator Door

Rack

Egg Tray

Levelling Screw

-The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up under normal operating conditions

11

Non Water Dispenser Model

	Freezer Temperature
FREEZER	Control Dial	Smart Diagnosis
COMPARTMENT
Lamp
Shelf
Twisting Ice Serve		Freezer Door Rack
Type Ice Making
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer (Optional)		Refrigerator Door
Fresh Room Drawer		Rack
		(Optional)
/Pull Out Tray (Optional)
Shelves
Hygiene Fresh		Refrigerator Door
(Optional)
		Rack
Vegetable Drawer
		Egg Tray
		Levelling Screw

-The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up under normal operating conditions

12

‘3’ or ‘4’.

‘5’.

When the freezer compartment is not cold enough in winter, adjust the control for the freezer to

High (6~8).

13

CONTROLS FOR REFRIGERATOR COMPARTMENT

FOR INTERNAL CONTROLLER MODEL

	REF. TEMP CONTROL
COLD	COLDEST

Ref. Temp Control Button

The default setting of the temperature control button for the refrigerator compartment is NORMAL.

To control the refrigerator temperature, press the REF. TEMP CONTROL button.

Whenever pressing the button, LED emitting the light.

The temperature is set in 7 steps, from COLD to COLDEST cooling. (COLD = warmest, COLDEST = coldest temperature)

FOR EXTERNAL CONTROLLER MODEL

Display graphic can be different, depend on the type of your refrigerator.

For non-dual display

For dual display

Press ‘FRIDGE’ button to control refrigerator temperature.

Whenever pressing the button, the LED emits light.

Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).

0 - Press a button, Fridge temperature will be down each 1OC

- Press b button, Hygiene Fresh motor will be on, power mode, off.

EXPRESS FREEZE

When the refrigerator is first turned ON the EXPRESS FREEZE feature can be turn ON. The compressor and circulating fan operate at maximum cooling capacity to quickly lower the refrigerator temperature. It shuts off automatically.

For non-dual display

For dual display

•If warm food is placed into the refrigerator, FAST FREEZING can be started with the button on the control panel. FAST FREEZING will shut off when the temperature reaches the proper level or it can be shut off manually by pressing the FAST FREEZING button.

14

CHILD LOCK (OPTIONAL)

• CHILD LOCK

Press and hold the child lock button for 3 seconds to lock the child lock. When it is locked, the Lock LED will be on and the other button will not operate. To unlock, press and hold the CHILD LOCK button for 3 seconds again.

For non-dual display

For dual display

Wi-Fi

This sets the refrigerator to connect to your home's Wi-Fi network.

For non-dual display

For dual display

Wireless LAN module Specifications

Model	LC-004
Frequency Range	2412 Mhz - 2472 MHz
	IEEE 802.11b: 17.82 dBm
Output Power (Max)	IEEE 802.11g: 17.72 dBm
	IEEE 802.11n: 16.61 dBm

Wireless function S/W version : V 1.0

GREEN ION DOOR COOLING

Cool air vent

The anion coating in the duct cover purifies the air and helps stored foods remain fresh longer.

If water of foreign substances enter the cool air vent while cleaning, efficiency will be lowered. In addition, if gasket is damaged, efficiency may be lowered owing to the escape of cool air.

VEGETABLE DRAWER

How to use

Vegetable drawer can be used through the control of knob.

Check the position of knob prior to store the food.

Do not locate the knob on the middle point.

15

ICE MAKING

Twisting Ice Serve Type

To make ice cubes, fill the ice tray with water and insert in its position.

To remove ice cubes, hold the lever of the tray and pull turn gently. Then, ice cubes drop in to the ice cube box.

WARNING

Fill with potable water only.

NOTE	You can disassemble the Ice Maker to
	secure space in the freezer.

Ice Trays

Ice Cube Box

Twisting Ice Serve Type: Remove 1 and 2

1.Ice Tray

2.Ice Cube Box

WARNING

1 2

Do not use anything other than water.

Fill the water up to the marked line.

<Twisting Ice Serve Type>

16

HYGIENE FRESH (OPTIONAL)

CAUTION

Before installing or using the product, make sure to read the owner's manual carefully to use the product accurately as intended. This HYGIENE FRESH filter has the antibacterial function of removing the virus or bacteria inside the refrigerator and the deodorizer function to remove the scent.

The function has tested and has been certificated by authorized institutions Intertek

Switch over to use mode

Switch over to use mode.

• To use the HYGIENE FRESH filter, touch the button on the display panel on the

front side of the door and switch over to the AUTO or POWER mode. (Whenever you touch the button, the HYGIENE FRESH filter will be switched to AUTO POWER OFF AUTO.)

AUTO

POWER

OFF

AUTO

CAUTION

When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Do not put in your finger or alien particles inside the fan. It can be caused of an injury or malfunction.

CAUTION

Do not wash the HYGIENE FRESH filter by using water because it can be caused of malfunction. This filter may not be effective for all types of bacteria and virus.

This is effective to remove the bacteria which is not on the food in the refrigerator.

You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.

17

WATER DISPENSER (OPTIONAL)

Pour water after the water tank is in position.

Necessarily separate the water tank to clean it our when not in use.

When the water tank is not in position after filling it with water, water can leak out by the valve.

Pouring water in the water tank

Cover Cap

1.Open the cover cap and pour water into the water tank.

2. Close the cover cap.

3.The water tank is optional removable part which can be applied to enlarge the storage capacity. You can use the upper basket after removing the water tank and closing up the hole with a plug.

The plug is enclosed with the egg tray.

Caution

Do not use anything other then water, even hot water needs to be cooled before being poured into the water tank.

Do not fill more than the indicated level.

Drinking Water

1.Press the dispenser pad with cup.

2.The water is released when the dispenser pad is pressed. The pad returns to its original position when the cup is removed and the water stops its flow.

18

SMART DIAGNOSIS (Only for applied models)

Using Smart ThinQ

Application

Installing Smart ThinQ

Search for the LG Smart ThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.

Wi-Fi Function

For appliances with the or logo

Communicate with the appliance from a smart phone using the convenient smart features.

Firmware Update

Keep the appliance performance updated.

Smart Diagnosis™

If you use the Smart Diagnosis function, you will be provided with the useful information such as a correct way of using the appliance based on the pattern of use.

Settings

Allows you to set various options on the refrigerator and in the application.

NOTE

To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit.

LG Smart ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.

The machine supports 2.4 GHz Wi-Fi networks only.

If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.

The Wi-Fi connection may not connect or may be interrupted because of the home network environment.

The network connection may not work properly depending on the internet service provider.

The surrounding wireless environment can make the wireless network service run slowly.

The application is subject to change for appliance improvement purposes without notice to users.

Functions may vary by model.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

Smart DiagnosisTM Using a Smart Phone

For appliances with the or logo Use

this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails.

Smart DiagnosisTM can not be activated unless the appliance is connected to power. IF the appliance is unable to turn on, then troubleshooting must be done without using

Smart DiagnosisTM.

19

SMART DIAGNOSIS (Only for applied models)

Using Smart DiagnosisTM

FOR INTERNAL CONTROLLER MODEL

Smart diagnosis function is...

Use the function to contact the service center and receive precise diagnosis when the refrigerator malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.

How to use the function

1.Open the refrigerator door. (Close the freezer door)

2.Open and close the door 5 times in 8 seconds to make th LED lamp inside the chamber blink.

3.Place the phone near the speaker hole at the top right.

Check if the speaking side (microphone) of the telephone is toward the speaker hole.

4.Do not take away the telephone while data is being transmitted.

During the data transmission for smart diagnosis, wait with the telephone placed near the speaker hole at the top right side.

CAUTION

The transmission sound may be irritating.

Do not take away the telephone until the sound stops for good diagnosis.

5.After the completion of the data transmission, listen to the explanation of the consultant about the result of the smart diagnosis.

When the data transmission is completed, along with the display of the data transmission completion, the refrigerator will be automatically turned off and on a few seconds later.

Listen to the explanation of the consultant about the result of the analyzed diagnosis and follow the instructions.

NOTE

ŸPosition the phone so that its microphone is aligned with the speaker hole.

ŸThe Smart DiagnosisTM sound is generated after around three seconds.

ŸDo not take the phone off the speaker hole while the data is transmitted.

ŸHold the phone to the upper right speaker hole and wait while the data is transmitted.

ŸThe data transfer sound may be harsh to the ear while the Smart DiagnosisTM data is being

transmitted, but do not take the phone off the speaker hole for accurate diagnosis until the data transfer sound has stopped.

ŸWhen the data transfer is complete, the transfer completion message is displayed and the control panel is automatically turned off and then on again after a few seconds. After the customer information centre explains the diagnosis result.

ŸThe Smart DiagnosisTM function depends on the local call quality.

ŸThe communication performance will improve and you can transmit a better signal if you use a land line home phone.

ŸIf the Smart DiagnosisTM data transfer is poor

due to poor call quality, you may not receive the best Smart DiagnosisTM service.

20

SMART DIAGNOSIS (Only for applied models)

Using Smart DiagnosisTM

FOR EXTERNAL CONTROLLER MODEL

Smart diagnosis function is...

Use the function to contact the service center and receive precise diagnosis when the refrigerator malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.

How to use the function

1.Close all refrigerator doors, and press and hold display lock button to make it locked state.

If the display is already in locked state, press and hold lock button to reset the lock and press and hold the lock button again to make it locked state.

CAUTION

If it passes 5 minutes in locked state, smart diagnosis function will not be activated, so be careful.

2.Press and hold fridge temperature button for 3 seconds or longer.

(All display screens will be turned off, and in a while, 3 will be displayed on the fridge temperature display part.)

3.Open all refrigerator compartment and freezer compartment doors and place the telephone near the speaker hole at the top right side.

Check if the speaking side (microphone) of the telephone is toward the speaker hole.

4.Do not take away the telephone while data is being transmitted.

During the data transmission for smart diagnosis, wait with the telephone placed near the speaker hole at the top right side.

The remaining time for data transmission is displayed on the display screen.

CAUTION

The transmission sound may be irritating. Do not take away the telephone until the sound stops for good diagnosis.

5.A f t e r t h e c o m p l e t i o n o f t h e d a t a transmission, listen to the explanation of the consultant about the result of the smart diagnosis.

When the data transmission is completed, along with the display of the data transmission c o m p l e t i o n , t h e r e f r i g e r a t o r w i l l b e automatically turned off and on a few seconds later.

Listen to the explanation of the consultant about the result of the analyzed diagnosis and follow the instructions.

NOTE

ŸPosition the phone so that its microphone is aligned with the speaker hole.

ŸThe Smart DiagnosisTM sound is generated after around three seconds.

ŸDo not take the phone off the speaker hole while the data is transmitted.

ŸHold the phone to the upper right speaker hole and wait while the data is transmitted.

ŸThe data transfer sound may be harsh to the ear while the Smart DiagnosisTM data is being

transmitted, but do not take the phone off the speaker hole for accurate diagnosis until the data transfer sound has stopped.

ŸWhen the data transfer is complete, the transfer completion message is displayed and the control panel is automatically turned off and then on again after a few seconds.

After the customer information centre explains the diagnosis result.

ŸThe Smart DiagnosisTM function depends on the local call quality.

ŸThe communication performance will improve and you can transmit a better signal if you use a land line home phone.

ŸIf the Smart DiagnosisTM data transfer is poor

due to poor call quality, you may not receive the best Smart DiagnosisTM service.

21

OPERATIONS

LAMP REPLACEMENT

NOTE : This product applies LED Lamp which cannot be replaced by the user. Please contact authorized service centre for the lamp replacement.

INVERTER-ON FEATURE (Optional)

1.While using this feature, the refrigerator will work on basic requirement as required by the product.

2.The results of the Inverter-On feature may vary depending on the number of appliances that are running on inverter.

3.For optimum running of refrigerator during Inverter-On mode, it is recommended to switch off the other appliances which are not in use.

4.It is recommended to confirm the quality of food items before consumption.

5.Ice cream etc. may get soften during the use of this feature, if situation arises so, it is recommended to change the setting as per one’s choice.

LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)

During the use of this feature, you will find this pattern of LED running. It is a symbol that the product is running at basic energy requirement. One can press the button “REF TEMP” to change the LED setting during power cuts, if needed. The LED will then show the setting as desired. When the mode is changed from Normal supply to Inverter mode & vice versa, the LED pattern will take some time to display the change.

22

•In the event of a blackout, call the electricity company and ask how long it is going to last.

-You should avoid door openings while the power is off.

-When the power supply gets back to normal, check the condition of the food.

•If there are chill compartments in the appliance, do not store vegetables and fruits with higher moisture content in the chill compartments as they may freeze due to the lower temperature.

23

24

25

SUPPLY CORD

REPLACEMENT

If the supply cord is damaged, it m u s t b e r e p l a c e d b y t h e manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Disposal of the old appliance

This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.

All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency.

“(For CENELEC countries) This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.”

26