<![endif]>ARABIC FRENCH ENGLISH
P/NO : MFL71664403
Rev.02_030520 |
Copyright © 2019-2020 LG electronics Inc. All rights reserved. |
IMPORTANT SAFETY INFORMATION |
............3 |
INSTALLATION............................................... |
10 |
INNER PARTS ................................................ |
11 |
OPERATIONS................................................. |
13 |
G*-*4**/ G*-*5**
Starting |
|
Before Setting The Temperature |
|
Door Alarm |
|
Self Test |
|
Controls For Freezer Compartment |
|
Controls For Refrigerator Compartment |
|
Express Freeze |
|
Child Lock (Optional) |
|
Wi-Fi |
|
Door Cooling+ |
|
Vegetable Drawer |
|
Defrosting |
|
Deodorizer |
|
Ice Making |
|
Hygiene Fresh (Optional) |
|
Water Dispenser (Optional) |
|
Smart Functions |
|
Lamp Replacement |
|
Vacation Time |
|
SUGGESTIONS ON FOOD STORAGE ......... |
23 |
CLEANING ..................................................... |
24 |
GENERAL INFORMATION ............................. |
25 |
IMPORTANT WARNINGS .............................. |
26 |
BEFORE CALLING FOR SERVICE ............... |
27 |
2
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartment, unless they are recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance requires special disposal procedures. When disposal, please consult with services agent or a similarly qualified person.
3
Risk of Fire and Flammable Materials
This symbol alerts you to flammable materials that can ignite and cause a fire if you do not take care.
This appliance contains a small amount of isobutane refrigerant
(R600a), but it is also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes. In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance is used should correspond to the amount of refrigerant used. The room must be 1 m2 in size for every 8 g of R600a refrigerant inside the appliance.
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
4
Do not use or store inflammable materials like ether, benzene, alcohol, medicine, LP gas, spray or cosmetics 
near or in the 
refrigerator. 
It may cause explosion or fire.
5
Install in places away from the fire such as the place
where flammable 
gas is leaked. 
It may cause fire.
If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the appliance or power plug and ventilate the area immediately. This appliance uses a refrigerant gas (isobutane,R600a). Although it uses a small amount of the gas,
it is still combustible
gas. Gas leakage during appliance transport, installation or operation can cause fire,
explosion or injury if sparks are caused
6
like gasket
7
Do not place glass containers, bottles or cans (especially those containing carbonated drinks) in the freezer compartment, shelves or ice bin that will be exposed to temperatures below freezing.
Completely empty inside before taking out the container from the door.
8
Please do not use a dishwasher to clean the lower drawers; the high temperature may cause damage to the baskets which make them unusable.
If the appliance is equipped with a lock (some countries only), keep the key out of reach of children.
This appliance is intended to be used in household and similar applications such as
-sta kitchen areas in shops, o ces and other working environments;
-farm houses and by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
9
Dimensions and Clearances
Too small of a distance from adjacent items may result in degradation of freezing capability and increased electricity costs. Allow over
50mm clearance from each adjacent wall when installing the appliance.
5.After installing the appliance, connect the power plug into a socket outlet. Before moving and discarding the appliance, disconnect the plug from the socket outlet.
Inverter-On feature (Optional)
Image for representation purpose only
- |
G*-*5** |
G*-*4** |
A |
700 |
700 |
B |
1780 |
1680 |
C |
730 |
730 |
D |
15 |
15 |
E |
660 |
660 |
F |
715 |
715 |
G |
1035 |
1035 |
H |
1200 |
1200 |
Ambient Temperature
The appliance is designed to operate within a limited range of ambient temperatures, depending on the climate zone. do not use the appliance at a temperature exceeding the limit.
The internal temperatures could be a ected by the location of the appliance, the ambient temperature, the frequency of door opening and so on.
The climate class can be found on the rating label.
Climate Class |
Ambient Temperture Range 0C |
|
|
|
|
SN (Extended Temperate) |
+10 |
- +32 |
|
|
|
N (Temperate) |
+16 |
- +32 |
|
|
|
ST (Subtropical) |
+16 |
- +38 |
|
|
|
T (Tropical) |
+16 |
- +43/+10 - +43* |
|
|
|
*Australia, India, Kenya
NOTE
The appliances rated from SN to T are intended to be used at an ambient temperature between 100C and 430C
Minimum requirement: UPS/ Inverter should be in ON condition having minimum 600VA capacity along with minimum 120Ah capacity battery connected with the refrigerator’s power supply socket.
10
Water Dispenser Model
FREEZER
COMPARTMENT
Lamp 
Shelf
Twisting Ice Serve
Type Ice Making
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
Fresh Room Drawer
/Pull Out Tray (Optional)
Shelves
Hygiene Fresh
(Optional)
Vegetable Drawer 
Freezer Temperature
Control Dial
Smart Diagnosis
Freezer Door Rack
Water Tank
Refrigerator Door
Rack
Egg Tray
Levelling Screw
-The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up under normal operating conditions
11
Non Water Dispenser Model
|
Freezer Temperature |
|
FREEZER |
Control Dial |
Smart Diagnosis |
COMPARTMENT |
|
|
Lamp |
|
|
Shelf |
|
|
Twisting Ice Serve |
|
Freezer Door Rack |
Type Ice Making |
|
|
REFRIGERATOR |
|
|
COMPARTMENT |
|
|
Lamp |
|
|
Deodorizer |
|
Refrigerator Door |
|
|
|
Fresh Room Drawer |
|
Rack |
|
(Optional) |
|
/Pull Out Tray (Optional) |
|
|
Shelves |
|
|
Hygiene Fresh |
|
Refrigerator Door |
(Optional) |
|
|
|
Rack |
|
|
|
|
Vegetable Drawer |
|
|
|
|
Egg Tray |
|
|
Levelling Screw |
-The automatic defrosting system in the appliance ensures that the compartment remains free of ice build up under normal operating conditions
12
STARTING
BEFORE SETTING THE TEMPERATURE
‘3’ or ‘4’.
‘5’.
DOOR ALARM
SELF TEST
CONTROLS FOR FREEZER COMPARTMENT
When the freezer compartment is not cold enough in winter, adjust the control for the freezer to High (6~8).
13
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR INTERNAL CONTROLLER MODEL
|
REF. TEMP CONTROL |
COLD |
COLDEST |
Ref. Temp Control Button
The default setting of the temperature control button for the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF. TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from COLD to
COLDEST cooling. (COLD = warmest, COLDEST = coldest temperature)
FOR EXTERNAL CONTROLLER MODEL
Display graphic can be di erent, depend on the type of your refrigerator.
For non-dual display
For dual display
Press ‘FRIDGE’ button to control refrigerator temperature.
Whenever pressing the button, the LED emits light.
Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).
0 
- Press a button, Fridge temperature will be down each 1OC
- Press b button, Hygiene Fresh motor will be on, power mode, o .
EXPRESS FREEZE*
When the refrigerator is first turned ON the EXPRESS FREEZE feature can be turn ON. The compressor and circulating fan operate at maximum cooling capacity to quickly lower the refrigerator temperature. It shuts o automatically.
For non-dual display
For dual display
•If warm food is placed into the refrigerator, FAST FREEZING can be started with the button on the control panel. FAST FREEZING will shut o when the temperature reaches the proper level or it can be shut o manually by pressing the FAST FREEZING button.
14
CHILD LOCK (OPTIONAL)*
• CHILD LOCK
Press and hold the child lock button for 3 seconds to lock the child lock. When it is locked, the Lock LED will be on and the other button will not operate. To unlock, press and hold the CHILD LOCK button for 3 seconds again.
For non-dual display
For dual display
Wi-Fi*
This sets the refrigerator to connect to your home's Wi-Fi network.
For non-dual display
For dual display
DOOR COOLING+
If water of foreign substances enter the cool air vent while cleaning, e ciency will be lowered.
VEGETABLE DRAWER
How to use
Vegetable drawer can be used through the control of knob.
Check the position of knob prior to store the food.
Do not locate the knob on the middle point.
* This feature will be OFF by itself, if the refrigerator is switched OFF.
15
DEFROSTING
DEODORIZER
ICE MAKING
Twisting Ice Serve Type
To make ice cubes, fill the ice tray with water and insert in its position.
To remove ice cubes, hold the lever of the tray and pull turn gently. Then, ice cubes drop in to the ice cube box.
WARNING
Fill with potable water only.
NOTE |
You can disassemble the Ice Maker to |
secure space in the freezer. |
Ice Trays 
Ice Cube Box 
Twisting Ice Serve Type: Remove 1 and 2
1.Ice Tray
2.Ice Cube Box
WARNING
1 
2 
Do not use anything other than water.
Fill the water up to the marked line.
<Twisting Ice Serve Type>
16
HYGIENE FRESH (OPTIONAL)
CAUTION
Before installing or using the product, make sure to read the owner's manual carefully to use the product accurately as intended. This HYGIENE FRESH filter has the antibacterial function of removing the virus or bacteria inside the refrigerator and the deodorizer function to remove the scent.
Switch over to use mode
Switch over to use mode.
• To use the HYGIENE FRESH filter, touch the 
button on the display panel on the
front side of the door and switch over to the AUTO or POWER mode. (Whenever you touch the button, the HYGIENE FRESH filter will be switched to AUTO 
POWER 
OFF 
AUTO.)
AUTO |
POWER |
OFF |
AUTO |
CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Do not put in your finger or alien particles inside the fan. It can be caused of an injury or malfunction.
CAUTION
Do not wash the HYGIENE FRESH filter by using water because it can be caused of malfunction. This filter may not be e ective for all types of bacteria and virus.
This is e ective to remove the bacteria which is not on the food in the refrigerator.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
17
WATER DISPENSER (OPTIONAL)
Pour water after the water tank is in position.
Necessarily separate the water tank to clean it our when not in use.
When the water tank is not in position after filling it with water, water can leak out by the valve.
Pouring water in the water tank
Cover Cap
1.Open the cover cap and pour water into the water tank.
2. Close the cover cap.
3.The water tank is optional removable part which can be applied to enlarge the storage capacity. You can use the upper basket after removing the water tank and closing up the hole with a plug.
The plug is enclosed with the egg tray.
Caution
Do not use anything other then water, even hot water needs to be cooled before being poured into the water tank.
Do not fill more than the indicated level.
Drinking Water
1.Press the dispenser pad with cup.
2.The water is released when the dispenser pad is pressed. The pad returns to its original position when the cup is removed and the water stops its flow.
18
SMART FUNCTIONS (Only for applied Models)
LG ThinQ Application
This feature is only available on models with Wi-Fi.
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
Communicate with the appliance from a smartphone using the convenient smart features.
Smart Diagnosis
If you experience a problem while using the appliance, this smart diagnosis feature will help you diagnose the problem.
Settings
Allows you to set various options on the appliance and in the application.
NOTE
If you change your wireless router, internet service provider, or password, delete the registered appliance from the LG ThinQ application and register it again.
The application is subject to change for appliance improvement purposes without notice to users.
Functions may vary by model.
Before Using LG ThinQ
Application
1Check the distance between the appliance and the wireless router (Wi-Fi network).
If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail.
2Turn o the Mobile data or Cellular Data on your smartphone.
3Connect your smartphone to the wireless router.
NOTE
To verify the Wi-Fi connection, check that the
icon on the control panel is lit.
The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.
LG ThinQ is not responsible for anynetwork co nnec tion p robl ems or an y f ault s, malfunctions, or errors caused by network connection.
If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
The network connection may not work properly depending on the Internet service provider.
The surrounding wireless environment can make the wireless network service run slowly. The appliance cannot be registered due to p r o b l e m s w i t h t h e w i r e l e s s s i g n a l transmission. Unplug the appliance and wait about a minute before trying again.
If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
The wireless network name (SSID) should be a combination of English letters and numbers.(Do not use special characters.)
19
SMART FUNCTIONS (Only for applied Models)
Smartphone user interface (UI) may vary depending on the mobile operating system
(OS) and the manufacturer.
If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols
(WPA2 is recommended) and register the product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This o er is valid for a period of three years after our last shipment of this product. This o er is valid to anyone in receipt of this information.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG ThinQ application, allows the appliance to connect to a home Wi-Fi network. The 
icon shows the status of the appliance’s network connection. The icon illuminates when the appliance is connected to the Wi-Fi network.
Initial Appliance Registration
Run the LG ThinQ application and follow the instructions in the application to register the appliance.
Re-registering the Appliance or Registering Another User
Press and hold the Wi-Fi button for 3 seconds to temporarily turn it o . Run the LG ThinQ application and follow the instructions in the application to register the appliance.
NOTE
To disable the Wi-Fi function, press and hold the Wi-Fi button for 3 seconds. 
icon will be turned o .
Smart Diagnosis
This feature is only available on models with the
or logo.
Use this feature to help you diagnose and solve problems with your appliance.
NOTE
For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
The feature may be subject to change without prior notice and may have a di erent form depending on where you are located.
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi e q u i p p e d a p p l i a n c e , i t c a n t r a n s m i t troubleshooting data to a smartphone using the LG ThinQ application.
Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu.
Follow the instructions provided in the LG ThinQ application.
20
SMART FUNCTIONS (Only for applied Models)
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the audible diagnosis method.
Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
Display panel is on the Freezer Door
1Close the freezer and fridge doors, then
press and hold the Lock button to activate the lock function.
If the display has been locked for over 5 minutes, you must deactivate the lock and then reactivate it.
2 Press and hold the Fridge button for 3 |
|
seconds or longer. |
|
The control panel will be turned o , and |
|
then ‘3’ will be displayed on the fridge |
|
temperature display part. |
After the data transfer is complete, the |
4 |
|
3 Open the freezer and fridge door, and then |
diagnosis will be displayed in the |
application. |
|
hold the phone on the upper right speaker |
|
hole. |
|
4After the data transfer is complete, the diagnosis will be displayed in the application.
NOTE
For best results, do not move the phone while the tones are being transmitted.
21
OPERATIONS
LAMP REPLACEMENT
NOTE : This product applies LED Lamp which cannot be replaced by the user. Please contact authorized service centre for the lamp replacement.
INVERTER-ON FEATURE (Optional)
1.While using this feature, the refrigerator will work on basic requirement as required by the product.
2.The results of the Inverter-On feature may vary depending on the number of appliances that are running on inverter.
3.For optimum running of refrigerator during Inverter-On mode, it is recommended to switch o the other appliances which are not in use.
4.It is recommended to confirm the quality of food items before consumption.
5.Ice cream etc. may get soften during the use of this feature, if situation arises so, it is recommended to change the setting as per one’s choice.
LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)
During the use of this feature, you will find this pattern of LED running. It is a symbol that the product is running at basic energy requirement. One can press the button “REF TEMP” to change the LED setting during power cuts, if needed. The LED will then show the setting as desired. When the mode is changed from Normal supply to Inverter mode & vice versa, the LED pattern will take some time to display the change.
VACATION TIME
During average length vacations, you will probably find it best to leave the refrigerator in operation. Place freezable items in freezer for longer life.
If you are leaving the appliance turned o for an extended period of time, remove all food and unplug the power cord. Clean the interior, and leave the doors slightly ajar to prevent mould from growing in the appliance.
22
•In the event of a blackout, call the electricity company and ask how long it is going to last.
-You should avoid door openings while the power is o .
-When the power supply gets back to normal, check the condition of the food.
•If there are chill compartments in the appliance, do not store vegetables and fruits with higher moisture content in the chill compartments as they may freeze due to the lower temperature.
23
24
25
SUPPLY CORD
REPLACEMENT
If the supply cord is damaged, it m u s t b e r e p l a c e d b y t h e manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency.
“This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.”
26
Loading...