OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
MT35*
MT55*
MT75*
www.lg.com
2 TABLE OF CONTENTS
ENGLISH
3 LICENSES
3OPEN SOURCE SOFTWARE NOTICE
4ASSEMBLING AND PREPARING
4 Unpacking
7Separate purchase
8Parts and buttons
10Lifting and moving the TV
11Setting up the TV
11 - Attaching the Stand
14Mounting on a table
15Mounting on a wall
17Tidying cables
17MAKING CONNECTIONS
18Antenna Connection
18Satellite dish Connection
18Euro Scart Connection
19Other Connections
21REMOTE CONTROL
22USIng the user guide
23MAINTENANCE
23 Cleaning Your TV
23- Screen, frame, cabinet and stand
23- Power cord
23Preventing “Image burn” or “Burn-in” on your TV screen
24TROUBLESHOOTING
25SPECIFICATIONS
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
ENGLISH
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
4 ASSEMBLING AND PREPARING
ENGLISH
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any pirated items to ensure the safety and product life span.
yyAny damages or injuries by using pirated items are not covered by the warranty. yySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
|
B |
|
B |
|
|
|
|
|
|
|
|
|
*A |
10 mm |
A |
|
A |
*B |
18 mm |
|
|
|
ASSEMBLING AND PREPARING 5
ENGLISH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
CD (Owner’s Manual), |
|
Stand Base |
Stand Base |
||||
Batteries (AAA) |
|
Cards |
|
(Only MT35*) |
(Only MT55*, MT75*) |
||||
(See p.21) |
|
|
|
(See p.12) |
|||||
|
|
|
(See p.11) |
||||||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Stand Body |
|
Stand Body |
|
Cable Tie |
Power Cord |
|
(Only MT35*) |
|
(Only MT55*, MT75*) |
|
(See p.17) |
(See p.14) |
|
|
(See p.12) |
|
|
|||
(See p.11) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC-DC Adapter |
|
Component gender |
|
Composite gender cable |
|
Isolator |
||||
(See p.14) |
|
cable |
|
(See p.19, 20) |
|
(Depending on model) |
||||
|
|
|
(See p.19, 20) |
|
|
|
(See p.6) |
|||
|
|
|
|
|
|
|
|
|
|
|
ENGLISH
6 ASSEMBLING AND PREPARING
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
or
Cable / Antenna |
Isolator |
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING 7
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
ENGLISH
AN-MR400 |
|
AN-VC4** |
Magic Remote |
|
Video call camera |
|
|
|
ENGLISH
8 ASSEMBLING AND PREPARING
MT35*
Screen
Speakers
Touch Buttons
MT55*
Remote Control Sensor
Power Indicator
yy Red : When the power is turned off yy Off : When the power is turned on
Screen
|
|
Power Indicator |
|
|
|
yy Red : When the power is turned off |
|
|
|
yy Off : When the power is turned on |
|
Speakers |
Remote Control Sensor |
||
|
|
||
|
|
|
|
|
|
|
|
Touch Buttons
MT75*
Screen
Speakers
Remote Control Sensor
Power Indicator
yy Red : When the power is turned off
yy Off : When the power is turned on
Touch Buttons
ASSEMBLING AND PREPARING 9
NOTE
yy All of the buttons are touch sensitive and can be operated through simple touch with your finger. yy Power and control touch button are located on the bottom. (Only MT75*)
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
Touch button |
Description |
|
Scrolls through the saved programmes. |
|
|
|
Adjusts the volume level. |
|
|
OK |
Selects the highlighted menu option or confirms an input. |
|
|
SETTINGS |
Accesses the main menus, or saves your input and exits the menus. |
INPUT |
Changes the input source. |
|
Turns the power on or off. |
|
|
ENGLISH