LG 27GN850-B Manual

*LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

27GN850

OWNER’S MANUAL

(LED Monitor*)

www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

ENGLISH

2

TABLE OF CONTENTS

LICENSE........................................	3
OPEN SOURCE SOFTWARE
NOTICE INFORMATION...............	4
ASSEMBLING AND PREPARING.4
--Supported Drivers and Software..........................	5
--Product and Button Description...........................	5
How to Use the Joystick Button
--Moving and Lifting the Monitor............................	6
Installing on a Table
Adjusting the Stand Height
Adjusting the Angle
Tidying up Cables
Using the Kensington Lock
Installing the Wall Mount Plate
Installing on the Wall

USING THE MONITOR..............	14	TROUBLESHOOTING................	29
--Connecting to a PC...................................................	14	PRODUCT SPECIFICATION	32
HDMI Connection
DisplayPort Connection		--Factory Support Mode............................................	34
--Connecting AV Devices...........................................	15	--HDMI Timing (Video)................................................	35
HDMI Connection		--Power LED......................................................................	36
--Connecting Peripherals...........................................	16
Connecting Headphones
USER SETTINGS........................	17
--Activating the Main Menu.....................................	17
Main Menu Features
--User Settings................................................................	19
Menu Settings

3

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other countries.

ENGLISH

ENGLISH

4

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail].

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

ASSEMBLING AND PREPARING

CAUTION

•• Always use genuine LG components to ensure safety and product performance.

•• The product warranty will not cover damage or injury caused by the use of unauthorized components.

•• It is recommended that use the supplied components.

•• If you use generic cables not certified by LG, the screen may not display or there may be image noises.

•• Illustrations in this document represent typical procedures, so they may look different from the actual product.

•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

•• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.

•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.

•• For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there is no problem in using the product at all.

NOTE

•• The components may look different from those illustrated here.

•• Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.

•• The power cord provided may differ depending upon the region.

•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

5

Supported Drivers and Software

Product and Button Description

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software	Installation Priority
Monitor Driver	Recommended
OnScreen Control	Recommended

Joystick Button

ENGLISH

6

How to Use the Joystick Button

ENGLISH	You can easily control the functions of the monitor by pressing the joystick button or
	moving it left/right with your finger.
	Basic Functions
	Power on	Press the joystick button once with
		your finger to turn on the monitor.
		Press and hold the joystick button
	Power off once with your finger to turn off the
		monitor.

/Volume You can control the volume by moving control the joystick button left/right.

		Controls	You can control the screen’s brightness
	/	screen
			by moving the joystick button up/down.
		brightness

NOTE

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

•• Place the monitor in the original box or packing material before attempting to move it.

•• Before moving or lifting the monitor, disconnect the power cord and all other cables.

•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

•• The joystick button is located at the bottom of the monitor.

•• When holding the monitor, the screen should face away from you to prevent it from being scratched.

•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.

•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

•• Avoid touching the monitor screen as much as possible.

-- This may result in damage to the screen or some of the pixels used to create images.

7

•• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

ENGLISH

ENGLISH

8

Installing on a Table

•• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation.

100 mm	100 mm
(3.94 inches)
	(3.94 inches)
100 mm	100 mm
(3.94 inches)
	(3.94 inches)

CAUTION

•• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

•• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.

•• If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Stand Height

1Place the monitor mounted on the stand base in an upright position.

2Handle the monitor with both hands for safety.

Max. 110.0 mm (4.3 inches)

9

Adjusting the Angle

1Place the monitor mounted on the stand base in an upright position.

2Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.

ENGLISH

Rear Front

WARNING

•• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

ENGLISH

10

WARNING

•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.

•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Tidying up Cables

Arrange the cables using the cable holder as shown in the illustration.

Mouse Holder

Cable Holder

Using the Kensington Lock

The connector for the Kensington security system is located at the bottom of the monitor.

For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

•• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

11

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible devices.

1Place the screen face down. To protect the monitor panel (screen), cover the surface with a soft cloth or the monitor protection pad included in the product package.

2Remove the four screws tightened on the back of the monitor.

3Place the wall mount plate onto the monitor and align it with the screw holes.

4Tighten the four screws using a screwdriver to fix the plate to the monitor.

NOTE

•• The wall mount plate is sold separately.

•• For more information on installation, refer to the wall mount plate’s installation guide.

•• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen.

ENGLISH

ENGLISH

12

Installing on the Wall

Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches) of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

100 mm

(3.94 inches)

	100 mm	100 mm
	(3.94 inches)
		(3.94 inches)
		100 mm
		(3.94 inches)

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

1If you use screws longer than the standard length, it may damage the inside of the product.

2A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of nonstandard screws.

Wall Mount (mm)	100 x 100
Standard screw	M4 x L10
Number of screws	4
Wall Mount Plate (Optional)	LSW 149